CS Paper Radar

EPR Count for Runtime Prediction in Distributed Quantum Computing

Fatih E. Bilgen, Ozgur B. Akan

cs.DC quant-ph ·submitted 2026-09-30 14:40 UTC · v1

Abstract

EPR-pair consumption is commonly used as a communication-cost objective in distributed quantum computing, but minimizing EPR cost does not necessarily minimize distributed execution time. Despite its widespread use, the reliability of EPR count as a runtime surrogate has received limited direct characterization across different workloads and communication conditions. This work addresses this gap by systematically evaluating the relationship between EPR cost and runtime over all balanced two-QPU mappings of QFT, QAOA, and CDKM circuits. The results show that mappings with identical EPR cost can have substantially different execution times, lower-EPR mappings can be slower, and minimum-EPR mappings can be runtime-suboptimal. The reliability of EPR count is strongly workload dependent and also changes with the communication operating regime: increasing EPR-generation latency amplifies runtime differences hidden by equal EPR cost, while increased communication concurrency can reduce the ability of EPR count to preserve runtime ordering. These results show that EPR count and execution time are related but distinct optimization objectives, and identify regimes in which explicit communication-aware runtime modeling is necessary.

Comment
8 pages, 5 figures, conference

Closest papers

Nearest neighbours by meaning across the whole index.

Resource-Aware Scheduling for Distributed Quantum Computing

cs.NI ·2026-10-21 ·Connor Howe, Raghav Mundada, Jake O'Shaughnessy, Ibrahim Abdullahi, Ali Anwar
similarity 0.72
Abstract

Distributed quantum computing (DQC) is a promising near-term approach for executing circuits that exceed the capacity of a single quantum processing unit (QPU). Prior work has made significant progress on circuit partitioning and reconstruction, but practical DQC requires more than cutting a circuit into smaller pieces. A runtime system must determine whether to execute the circuit intact, cut it for sequential execution on one QPU, or distribute it across multiple QPUs, while accounting for queueing, communication, reconstruction, and hardware constraints. We present a resource-aware scheduler for DQC that compares these execution alternatives at runtime using explicit models of QPU execution, communication, and host-side reconstruction, together with hardware-informed timing derived from simulated IBM QPUs. By treating communication and reconstruction as first-class scheduling costs, the scheduler selects execution plans using a more realistic view of end-to-end overhead than cutting-only approaches. Across our experiments, reconstruction accounts for over 83% of cutting overhead, distributed execution reduces P90 latency by up to 39% relative to uncut single-QPU execution, and scheduling overhead itself remains negligible, never exceeding 0.038% of end-to-end job latency. Together, these results show that DQC must be treated as a runtime scheduling problem over both quantum and classical resources, not just circuit partitioning.

0.15

Quantum Broker: QoS-Aware Distribution of Quantum Computations

cs.ET quant-phcs.SE ·2026-10-20 ·Giuseppe Bisicchia, Alessandro Bocci, Jose Garcia-Alonso, Juan Manuel Murillo, Antonio Brogi
benchmarkcode/data similarity 0.68
Abstract · 32 pages

Cloud-accessible quantum computing has made heterogeneous Quantum Processing Units (QPUs) available through provider platforms that differ in qubit technology, calibration state, queueing behavior, and pricing model. This heterogeneity makes execution management a quantum-engineering concern: a quantum circuit may be executable on several backends, but the resulting cost, latency, fidelity, and reproducibility depend on backend selection and on how measurement shots are allocated. This paper presents the Quantum Broker, an open-source and provider-agnostic framework for Quality-of-Service-aware quantum execution management. The framework operationalizes shot-wise distribution by exploiting the statistical independence of quantum measurement shots to dispatch a single circuit across multiple heterogeneous QPUs according to user-defined constraints and optimization objectives. It combines a modular execution architecture, interchangeable backend-profiling strategies, and the Quantum QoS Specification Language (QQSpec), a declarative language for expressing QoS requirements. Dispatch planning is supported by two solver backends: a mixed-integer linear-programming (MILP) solver, and a nonlinear dual-annealing solver. Experiments on benchmark quantum circuits and noisy simulator backends show that the Quantum Broker can produce feasible QoS-aware dispatch plans under heterogeneous backend conditions and can improve QoS satisfaction with respect to single-backend and naive multi-backend baselines. The results also expose a practical trade-off between planning time and dispatch quality, with the nonlinear solver producing higher-quality allocations at increased computational cost. Overall, the Quantum Broker provides an extensible execution-management layer for engineering portable, reproducible, and QoS-aware quantum software over fragmented quantum cloud infrastructures.

0.24

Towards Reproducible Evaluation of Distributed Quantum Circuit Partitioning Algorithms

cs.DC quant-ph ·2026-08-27 ·Javier Vela-Tambo, Davud Azizov, Tian Guo
code/data similarity 0.67
Abstract · Accepted at IEEE QCE 2026 Workshop: Distributed Quantum Computing Systems and Infrastructure

Distributed Quantum Computing (DQC) addresses the physical scaling limitations of monolithic quantum processors by networking modular Quantum Processing Units (QPUs). Efficient execution of quantum algorithms on DQC architectures requires compiling them across QPUs while minimizing inter-QPU communication bottlenecks, primarily through circuit partitioning. However, current evaluations of state-of-the-art partitioning heuristics focus primarily on the total entanglement cost of the partitions, failing to capture the broader structural and temporal overheads introduced by distributed network constraints. This paper addresses this evaluation gap by applying established monolithic benchmarking metrics to partitioned distributed circuits to quantify the performance impact of network constraints. Using an open-source, automated evaluation pipeline, we systematically assess diverse partitioning algorithms across standardized workloads and quantum network topologies. Our empirical results reveal that partitioning algorithms with comparable entanglement costs can still introduce drastically different physical execution penalties. By exposing these hidden trade-offs, such as severe increases in circuit depth and substantial reductions in gate density, this study demonstrates that comprehensive circuit-level metrics are essential for guiding the future design of DQC compilers.

0.21

Towards Continuous Profiling and Optimization of Quantum-Classical Pipelines

cs.ET quant-phcs.OS ·2026-09-05 ·Ayush Bansal, Owen Cochell, Santiago Núñez-Corrales, Marcos Frenkel, Seetharami Seelam +2 more
similarity 0.65
Abstract

Quantum applications increasingly execute as multi-stage quantum-classical pipelines, interleaving QPU computation with classical stages like circuit generation, transpilation, layout mapping, quantum error mitigation (QEM), and post-processing. These stages have diverse resource requirements and exhibit stochastic behavior under drifting hardware noises, yet existing workflow frameworks treat them as static, isolated components. We present LLQM (Low-Level Quantum Machine), a profiling-driven meta-framework for quantum-classical pipelines. LLQM decomposes pipelines into fine-grained tasks and continuously profiles their CPU/GPU, memory, QPU, and queue dependencies alongside real-time hardware states. This unified runtime abstraction captures cross-stage resource dependencies and reveals how classical and quantum decisions interact, enabling characterization of their impact on fidelity and resource consumption. We evaluate LLQM using QEM as a representative pipeline stage, on IBM 156-qubit Heron r2 processors with circuits up to 100 qubits and 1e7 transpiled gates. Our results show that continuous profiling exposes runtime bottlenecks and enables hardware-, fidelity-, and workload-aware optimizations.

0.17

ReFINE: Scheduling of Distillation and Coding for Rate-Fidelity Tradeoff in Quantum Networks

cs.ET quant-ph ·2026-09-17 ·Narges Alavisamani, Matthieu Bloch, Moinuddin Qureshi
similarity 0.65
Abstract

In quantum networks, nodes are connected via sharing of Einstein-Podolsky-Rosen (EPR) pairs, ideally with high fidelity and high rate. However, the fidelity of EPR pairs degrades due to imperfect generation and decoherence errors. Entanglement Distillation is a method that increases the fidelity but operates probabilistically and may destroy all involved EPR pairs upon failure. This failure reduces available EPR pairs for application use, thereby decreasing the service rate. Quantum Error Correction (QEC) is another mechanism to protect EPR pairs against error by forming what we term as Coding-Enhanced Memory (CEM). While effective, CEM requires extra time and resources to form the code, which also reduces the service rate. Existing methods often use static combinations of distillation and CEM, ignoring demand variations. This results in a low service rate without significant fidelity gain. Limited resources together with this rate-fidelity tradeoff make it essential to schedule when to run distillation, form CEM, or serve requests. We propose ReFINE, a demand-aware preemptive scheduler that based on application requirements either serves an available EPR pair immediately or preserves it in CEM. This selective use of CEM, only when needed, enables a better balance for rate-fidelity tradeoff than always using CEM. Between request arrivals, ReFINE either schedules distilling EPR pairs or forming CEM to protect distilled pairs, following one of the three priority policies: ReFINE-D (Distillation-First) first generates EPR pairs for distillation and then forms the CEM, prioritizing service rate. ReFINE-M (Memory-First) first forms the CEM, then generates the EPR pairs for distillation, prioritizing fidelity. ReFINE-C (Concurrent) performs both distillation and CEM formation concurrently, balancing between fidelity and service rate.

0.11

DynaMite: Dynamic Measurement Scheduling To Accelerate Fault-Tolerant Quantum Programs

cs.AR quant-ph ·2026-11-03 ·Dongwhee Kim, Suhas Vittal, Poulami Das
similarity 0.64
Abstract · 19 pages, 18 figures

Fault-tolerant quantum computers run millions of logical cycles to perform quantum error correction (QEC). As logical operations span entire logical cycles, the logical cycle time (LCT) dictates program runtime. Qubit measurements, critical to extract parity information for QEC, are the slowest operations and account for 43-86% of LCT. Measurement latencies impact fidelity: fast measurements lower our ability to correctly classify quantum states, whereas slow measurements increase the likelihood of decoherence. Hardware providers thus calibrate measurement latencies that maximize readout fidelity per qubit and use them to schedule all measurements during program execution. However, calibrated latencies are sub-optimal for logical performance because logical cycles span multiple QEC rounds, during which data qubits are not measured. This increases LCT and logical error rates (LERs) due to decoherence at the logical level. We propose DynaMite, a lightweight real-time measurement latency selection policy built on two key insights. First, logical cycles must use a measurement latency that is fast enough to reduce both LCT and LER for the QEC code, instead of the calibrated latency that only maximizes readout fidelity. Second, not all logical cycles are equal; many do not fully utilize the error budget of the QEC code, i.e., the number of failed parity checks it can tolerate without compromising LER. These cycles could use even faster measurements but do not, because latencies are chosen statically, whereas error information is only available at runtime. DynaMite exploits the fact that a logical cycle comprises multiple QEC rounds and selects the fastest latency for an upcoming round based on the error budget left and rounds remaining. Our evaluations show that DynaMite reduces LCT by 1.69x on average and up to 2.29x, and reduces LER to 0.46x on average and up to 0.13x of baseline.

0.11

Communication-Aware Qubit Placement and Automatic Node-Count Allocation for Distributed State-Vector Simulation

cs.DC cs.ET ·2026-10-07 ·Íñigo Aréjula-Aísa, Sergio Iserte, Petter Sandås, Ricard S. Raigada-García, Antonio J. Peña
similarity 0.64
Abstract

Quantum circuit simulation enables the execution of large-scale quantum algorithms by partitioning qubits across multiple computational nodes. However, an inefficient qubit placement leads to excessive inter-node communication, limiting performance and scalability. This work introduces a framework that computes a communication-aware qubit placement offline, minimizing data exchange among nodes, and selects, before circuit execution, the largest node count whose performance degradation stays below a user-defined threshold. The framework is integrated with the QuEST simulator. Evaluations on synthetic benchmarks and real-world QASMBench circuits show that optimized placements reduce communication and achieve runtime speedups of up to 2.3x over the identity placement, particularly in circuits with sparse, structured interactions. Our results show that qubit placement strongly affects the efficiency of distributed simulation and provide a practical, resource-scalable solution for quantum workload

0.30

Enabling Dynamic Resource Scaling in Quantum Circuit Simulations

cs.DC ·2026-10-29 ·Íñigo Aréjula-Aísa, Sergio Iserte, Petter Sandås, Ricard S. Raigada-García, Oliver Brown +2 more
similarity 0.62
Abstract

Studies of quantum algorithms often simulate se- quences of circuits whose number of qubits changes from one circuit to the next, such as instances of increasing size of the same problem. Since each additional qubit doubles the state- vector, every circuit needs a different number of nodes, which a fixed allocation on a shared High-Performance Computing (HPC) system cannot provide: a job sized for the largest circuit leaves most of its nodes idle, and one job per circuit adds scheduler interactions and queue waits. We make the QuEST state-vector simulator malleable with the Dynamic Management of Resources (DMR) framework, so that a single job resizes between circuits. Because no state-vector exists between circuits, reconfigurations require no data redistribution and no changes to the simulation kernels, and a checkpoint holding the index of the next circuit is enough to resume. A right-sizing policy derives the number of nodes from the number of qubits, and the circuit_executor API hides reconfigurations from the user. We evaluate the reconfiguration overhead on MareNostrum 5 and show that a single job can run a batch of circuits of different sizes, adapting its allocation to each of them with negligible overhead.

0.05