CS Paper Radar

Learning Higher Order DC-DC Converter Control from Inversion

Kamakshi Tatkare, Ufuk Topcu, Brian Johnson

eess.SY ·submitted 2026-09-30 16:19 UTC · v1

Abstract

Control design for high-order converters with nonlinear dynamics is generally difficult. Nonlinear controls introduce formidable model complexity whereas linear controls suffer from poor disturbance rejection. Our objective in this paper is to develop a simple neural-network-based controller that learns the control law from supervised trajectories generated by a model-based bounded inversion framework. First, we establish strong invertibility for the converter models. Next, we prescribe the desired closed-loop behavior through a trajectory model that defines the target dynamics. We then invert the converter dynamics numerically to obtain the corresponding duty-cycle and state trajectories. We use these model-based trajectories as supervision and train a neural network to approximate the resulting state-to-duty control law. The results show that the learned controllers accurately recover the inversion-based control action and achieve effective regulation under load and input-voltage disturbances. We validate the method on fourth order Cuk, SEPIC, and zeta converters.

Comment
Accepted at the IEEE 27th Workshop on Control and Modeling for Power Electronics (COMPEL 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

Flatness-based Neural Network Control of DC-DC Converters

eess.SY ·2026-09-30 ·Kamakshi Tatkare, Ufuk Topcu, Brian Johnson
published similarity 0.75
Abstract · Accepted to 2026 65th IEEE Conference on Decision and Control (CDC)

In this work, we present a simple method to engineer a small neural network to control power converters. Learning-based methods have emerged as a promising approach for power converter control over wide operating point variations. However, many of these approaches do not exploit the analytical structure of converter dynamics and, therefore, search over unnecessarily broad policy classes. We address this gap with a systematic framework that combines model-based trajectory generation with policy learning. First, we use differential flatness of averaged converter models to generate feasible state and constrained duty cycle trajectories where duty acts as a control effort signal. Then for policy learning, we use these model-generated trajectories to construct labeled state-to-duty data and train a multilayer perceptron to approximate the control law with a static map. We apply this framework across buck, boost, and buck-boost converters through topology-dependent flat output selection and a common learning pipeline. Simulations show close agreement between learned and model-generated duty trajectories and stable regulation under large synchronous input and load disturbances.

0.46

Enhanced Imitation Learning of Model Predictive Control through Importance Weighting

eess.SY ·2026-11-04 ·Pere Izquierdo Gómez, Miguel E. López Gajardo, Nenad Mijatovic, Tomislav Dragicevic
top venuehighly cited similarity 0.60
Abstract

The approximation of model predictive control (MPC) algorithms with neural network models has received significant attention in the power electronics research community, as a valuable tool to enable the real-time implementation of computationally expensive methods. Training machine learning models to imitate MPC algorithms typically follows a traditional supervised learning flow, with a static training data set generated through either uniform sampling or simulation. Training with uniformly distributed data allows models to maintain consistent performance throughout the entire operating space, but very small models may fail to achieve satisfactory results in the regions corresponding to expected operation. Conversely, simulation data can be used in training to obtain models that can accurately track certain trajectories but fail to achieve adequate performance in underrepresented regions. The present article proposes a method to combine the advantages of both methods, by training models on sampled data with importance weights obtained through the kernel density estimation of experimental data. This allows the training process to target specific regions of the operating space, and results in measurable performance improvements. The method is demonstrated through the imitation of a moving discretized control set MPC algorithm for a dual active bridge converter, and is validated through experimental results.

0.70

Physics-Informed Learning of Feedback-Linearizing Representations

eess.SY ·2026-09-26 ·Pavlos Kallinikidis, Fengjun Yang, David Snyder, Jacob H. Seidman, Nikolai Matni +2 more
theory similarity 0.59
Abstract

Feedback linearization is a powerful tool in nonlinear control, but finding the linearizing coordinate transform remains challenging. Feedback linearizing transforms are governed by well-established partial differential equations (PDEs) whose well-posedness is based on the Lie-algebraic Frobenius theorem, but solving the PDEs becomes computationally intractable for large system dimensions. To address this challenge, we propose a cascaded physics-informed neural network (PINN) framework to approximately solve these PDEs. By separately parameterizing terms of different Lie derivative orders, we mitigate the compounding errors inherent in fitting high-order Lie derivatives of neural networks. Furthermore, we use the learned transform to design a tracking controller and establish theoretical bounds on its error with respect to inaccuracies in the learned feedback-linearizing representation. We validate our method on a broad class of feedback linearizable systems, including a multi-input, multi-output planar quadrotor and synthetic examples for which analytical approaches are impractical, and demonstrate that our approach can computationally discover effective feedback-linearizing representations of nonlinear systems for control tasks.

0.22

Stability-Constrained Imitation Learning for Performance-Guaranteed Neural Feedback Frequency Control in Microgrids

eess.SY ·2026-11-17 ·Sajid Kamal, Yichen Zhang, Feng Qiu, Tianqiao Zhao
similarity 0.58
Abstract · 10 pages

Guaranteeing performance for frequency control is challenging within traditional control paradigms, as it demands precise disturbance estimation and real-time control signal computation within a timeframe of seconds. This paper addresses this challenge by proposing a stability-certified imitation learning framework for frequency regulation in low-inertia microgrids. Based on the frequency response model of the microgrid, an offline numerical optimal control is employed to generate near-optimal pairs of state and control dataset, which are subsequently used to train a deep neural network (DNN) feedback controller. To ensure the closed-loop stability, the DNN controller is trained with a set of Lyapunov-based stability constraints derived using absolute stability theory. Such an imitation learning paradigm can significantly improve the training efficiency, while the resulting DNN controller acts as an end-to-end function that simultaneously handles disturbance estimation and control optimization. The proposed framework is validated on a modified IEEE 33-node diesel-wind microgrid. The DNN controllers are deployed in wind turbine generators (WTGs) to provide decentralized, intelligent supplementary active power support to always maintain frequency deviations within predefined safety bounds under different disturbances while preserving closed-loop stability.

0.34

Learning Stabilizing Latent Feedback Controllers via Multi-Step Backward Losses

cs.LG math.OCeess.SY ·2026-10-29 ·Paul Lutkus, Lars Lindemann, Stephen Tu
similarity 0.58
Abstract

Can learned latent dynamics models support the design of feedback controllers that provably stabilize the original system? For linear time-invariant systems, we show that learning linear autoencoders and latent dynamics with multi-step prediction-reconstruction losses $\unicode{x2014}$ which we term "backward losses" as they encourage latent trajectories to reconstruct full state trajectories $\unicode{x2014}$ provably recovers the structure needed for stabilization. Specifically, a sufficiently long reconstruction horizon ensures that a minimum ${H}_\infty$-norm controller designed using the learned latent model stabilizes the original system through output-feedback via the corresponding encoder, provided the latent dimension is large enough to capture all non-stable modes of the underlying system. We also show why both reconstruction and a multi-step horizon are essential: forward prediction losses that require only low prediction error along latent trajectories admit global loss minimizers that discard unstable modes regardless of horizon length, while single-step reconstruction losses can yield latent models whose stabilizing controllers fail to stabilize the original system. Finally, experiments on a non-linear flexible-arm system illustrate the practical implications of our results for learning non-linear autoencoders and latent dynamics.

0.08

Certified Neural Approximation of Robust Nonlinear Model Predictive Control

eess.SY cs.LG ·2026-10-21 ·Hendrik Alsmeier, Maik Pfefferkorn, Rolf Findeisen
similarity 0.57
Abstract · 12-page article plus 4-page supplement, 3 figures

Model predictive control is a high-performance control method, but it incurs comparatively high online computational costs across many control tasks and is challenging to realize in low-level hardware settings. To address this, we present a framework for generating neural network controllers that provably inherit the safety and stability guarantees of a robust model predictive policy. In contrast to approaches based on post-verification or additional online safety filters, our method provides constructive, a priori design conditions that ensure preservation of recursive feasibility and stability before deployment. We treat the approximation error as a bounded input disturbance, which is addressed in the MPC design. This allows the neural network controller to directly inherit robustness from the underlying model predictive controller, which enables the transfer of guarantees to the approximation. The design process is an offline, constructive synthesis pipeline and can be implemented once Lipschitz bounds are specified. We further demonstrate in simulation that the learned controller reproduces the closed-loop behavior of the original controller while reducing online computation.

0.11

Joint Learning of Control Lyapunov Functions and Controllers via Stable-by-Design Surrogates

eess.SY cs.LG ·2026-11-16 ·Patricia Pauli, Matthieu Barreau
similarity 0.57
Abstract

Training and verifying neural network-based control Lyapunov functions (CLFs) can be computationally demanding. To address this challenge, we propose a framework that jointly learns a CLF and a stabilizing controller using structured neural networks and a projection-based parameterization. Specifically, we employ Polyak-Lojasiewicz networks (PLNets), which parameterize nonconvex, positive-definite CLF candidates, and construct a stable-by-design surrogate of the closed-loop dynamics that satisfies the Lyapunov decrease condition by construction. The controller combines linear state feedback with a higher-order correction term resembling Sontag's universal formula and is trained to align the resulting closed-loop dynamics with the stable-by-design surrogate. Unlike classical approaches based on Sontag's formula, our framework does not require a known CLF; instead, it learns the CLF and controller simultaneously. We establish local and global stability guarantees for the learned controller and demonstrate the effectiveness of the proposed approach through numerical examples.

0.41

Optimal Control with Learned Critics under Unmodeled State Dependencies

cs.RO cs.AI ·2026-10-04 ·Philipp Schoch, Markus Ryll
published similarity 0.55
Abstract · Keywords: Model Predictive Control, Model-Based Reinforcement Learning, iLQR, Value Function Approximation. Presented at 10th Conference on …

Model Predictive Control (MPC) provides a structured and constraint-aware mechanism for decision-making, but its reliance on optimization-friendly analytical dynamics models limits its use in tasks with contacts and other hard-to-model state dependencies. Model-free reinforcement learning avoids explicit modeling assumptions but typically requires large amounts of interaction data. We present a learning-based MPC framework that combines the data efficiency and structure of local model-based planning with learned components that compensate for incomplete dynamics and finite-horizon myopia. The method augments a nominal analytical model with a residual dynamics network that learns missing state-dependent effects from data and combines the resulting planner with a learned action-value critic that injects long-horizon MDP structure into the local iLQR optimization. To make this practical at reinforcement-learning scale, we develop a GPU-accelerated batched iLQR solver that evaluates learned dynamics and critic networks inside the optimal-control loop and solves thousands of trajectory-optimization problems in parallel. The complete system is integrated into a robotics simulator, enabling scalable model-based reinforcement learning under incomplete dynamics. Experiments on biased and incompletely modeled control tasks show that the approach improves closed-loop control performance while preserving the model-based structure needed for efficient constrained trajectory optimization.

0.33