CS Paper Radar

DexPolicy: Scheduled Exploration for Trajectory-Guided Dexterous Manipulation

Haoyu Wang, Siyuan Qian, Yanjun Li, Zeyu Zhang, Yandong Guo, Boxin Shi, Hao Tang

cs.RO cs.CV ·submitted 2026-09-30 04:19 UTC · v1
code/data

Abstract

Reinforcement learning (RL) for dexterous manipulation must discover finger-object contacts and then control the object precisely; the action noise that serves the first goal can interfere with the second. In trajectory-guided settings such as ViViDex, where RL refine hand-object trajectories from human video, our baseline PPO runs end near their initial action noise after 5M steps, motivating explicit control of exploration scale. DexPolicy makes that scale an explicit function of training steps, annealing from broad to narrow exploration while holding loss, architecture, reward, and optimizer settings fixed. We study three policy-optimization settings: PPO, critic-free GRPO continuation, and a flow-parameterized PPO variant (FPO). Across five YCB objects and three training seeds, mean deterministic Target success rises from 49.4% to 68.1% (FPO), 14.1% to 45.4% (GRPO), and 32.0% to 35.7% (PPO). On a RealMan RM75 arm with an Inspire/RH56 hand, 360 trials over three objects raise mean Target success from 25.0% to 85.0% (FPO), 10.0% to 63.3% (GRPO), and 8.3% to 43.3% (PPO), with one trained model per object-method condition. PPO component screening favors noise control over the tested optimizer contraction; the selected PPO schedule yields higher mean Target success than linear decay with the same endpoints on three tested objects. Training return, deterministic Target success, and tolerance to execution noise dissociate; schedules should therefore be judged by terminal task success under the intended execution conditions, per task and policy-optimization setting. Code: https://github.com/AIGeeksGroup/DexPolicy. Website: https://aigeeksgroup.github.io/DexPolicy.

Closest papers

Nearest neighbours by meaning across the whole index.

Dex-One2Many: Learning Dexterous Manipulation from a Single Human Demonstration

cs.RO cs.CV ·2026-10-08 ·Jusuk Lee, Sungha Kim, Yeonsoo Park, Jonguk Cheon, Yoonkyo Jung +6 more
code/data similarity 0.77
Abstract · Project page: https://dex-one2many.github.io/

While learning dexterous manipulation from a single human video offers a promising alternative to costly robot demonstrations, many recent methods predominantly imitate demonstrated motions. Such strict motion matching often limits generalization to initial object poses, goal poses, and grasps not shown in the video. Alternatively, discovering a policy via reinforcement learning (RL) allows for broad generalization, but without prior guidance, it struggles with high-dimensional exploration in complex, multi-stage tasks. To address these coupled generalization and exploration challenges, we present Dex-One2Many, a real-to-sim-to-real framework that learns a generalizable dexterous manipulation policy from a single human video. Our key insight is to abstract the video into sequential scene graphs that guide RL, enabling efficient exploration while preserving broad generalizability. The graphs serve as generative constraints for sampling diverse reset states and provide dense rewards for each stage. Because the graphs constrain relations rather than exact poses, these reset states cover object poses and grasps beyond the video, while initializing each stage from them with dense rewards keeps exploration short and guided. Trained entirely in simulation, Dex-One2Many transfers zero-shot to a real multi-fingered hand. Across five tool-use and manipulation tasks, Dex-One2Many exceeds baselines by 6.5% in seen configurations, while its robust generalization widens this gap to 71% in unseen scenarios.

0.29

DexArena: A Unified Benchmark for Long-Horizon Dexterous Manipulation

cs.RO ·2026-11-02 ·Haonan Ping, Jianshu Hu, Yimin Wang, Yi Zhu, Pai Liang +10 more
benchmarkcode/data similarity 0.76
Abstract · Project page: https://sipair-elastic.github.io/DexArena-website/

Long-horizon dexterous manipulation remains a fundamental challenge for robot learning, requiring the composition of multiple skills, precise bimanual coordination, generalizable visual understanding, and robust skill transitions. Yet existing manipulation benchmarks largely emphasize isolated skills or support only a limited range of end-effectors, making these capabilities difficult to evaluate systematically. We introduce DexArena, a benchmark designed to evaluate learning and generalization in long-horizon bimanual dexterous manipulation. DexArena features 10 long-horizon tasks and 30 stage-level tasks spanning diverse household and industrial scenarios. Each long-horizon task is composed of explicitly defined stages with physically grounded success conditions, enabling reliable evaluation of both intermediate progress and end-to-end task completion. A unified benchmark interface and verified human-teleoperated demonstrations enable testing different policy learning algorithms, with standardized simulation configurations, scene randomization, trajectory replay, and task-level evaluation. Through extensive baseline experiments, we identify substantial challenges in precise manipulation, generalization to scene variation, and skill composition. DexArena establishes a challenging and reproducible benchmark for developing robot learning methods that move toward generalizable long-horizon dexterous behavior.

0.23

DynaForge: Planning-Guided Residual Learning for Dynamic Manipulation Demonstration Generation

cs.RO ·2026-09-22 ·Yiyang Jin, Yu Zheng, Xiao He, Hesheng Wang
similarity 0.75
Abstract · 8 pages, 6 figures. Under review

Dynamic object manipulation is essential for robots operating in real-world environments, yet methods for generating high-quality demonstrations remain limited. Methods designed for static tasks do not readily transfer to dynamic settings. Among dynamic demonstration generators, planning-based methods can fail near contact, while DOMINO-style replay simplifies dynamic interactions and may limit the experience available for policy learning. We present DynaForge, a planning-guided framework that learns residual corrections for dynamic manipulation demonstration generation. DynaForge combines low-frequency global planning with high-frequency object-centric inverse kinematics across task phases, and applies a residual policy to correct actions during dynamic interaction. An implicit curriculum groups rollouts under matched conditions and selects mixed-success groups, focusing residual reinforcement learning on the evolving competence frontier. On Can and Bottle, it uses 0.73x as many optimizer steps as vanilla GRPO at the same nominal environment-step budget, with higher observed final success rates. Across nine simulation tasks, DynaForge increases mean demonstration-generation success from 41.30% of the planning prior to 78.37%. With 800 demonstrations per task, DP3 policies trained on DynaForge data achieve 49.11% mean success, compared with 7.07% for DOMINO data. On three real-world dynamic tasks, DynaForge-trained policies achieve 30-60% success, compared with 0-10% for DOMINO-trained policies, showing the ability of DynaForge for sim-to-real transfer.

0.24

X-Reset: Scaling Object-Centric Reinforcement Learning via Cross-Embodiment Resets

cs.LG cs.AIcs.RO ·2026-09-28 ·Prithwish Dan, Chenyang Ma, Wei Zhan
similarity 0.74
Abstract

Reinforcement learning (RL) in simulation can train dexterous manipulation policies without robot demonstrations, but training a single generalist policy with task-agnostic rewards faces a severe exploration problem: approaching, grasping, and reorienting diverse objects with many degrees of freedom is difficult to discover from scratch. Prior works make exploration tractable with high-quality robot demonstrations, per-task reward shaping, or by restricting policies to narrow modes of behavior. We propose X-Reset, a framework that instead resolves exploration with human hand-object demonstrations. Rather than imitating or tracking retargeted human motion, X-Reset kinematically retargets hand-object states to noisy robot states, filters out states that are unstable in simulation, and samples the remainder as resets during RL training with general-purpose object-centric rewards. The resulting policy depends only on object state and goal, with demonstrations entering training through the reset distribution. We show that X-Reset trains generalist policies on 20 objects across three embodiments---a 22-DoF hand on two different arms and a parallel-jaw gripper---and resolves the exploration challenges of RL from scratch. X-Reset scales with the number of training objects, generalizes to unseen objects, can learn from imperfect hand-pose estimates, and transfers behaviors zero-shot from sim-to-real.

0.14

Fade to... Red? Scheduling Coloured Noise Exploration Supports Efficient Robot Learning with Reduced Movement Jerk

cs.RO cs.LG ·2026-11-09 ·Francisco M. López, Francisco Cruz
top venue similarity 0.74
Abstract · 10 pages, 4 figures, 1 table. Accepted at the ACRA 2026 conference. Cite as: "López, F. M., and Cruz, F. (2026). Fade to... Red? Scheduling …

Exploration in deep reinforcement learning (RL) for continuous control is commonly driven by temporally uncorrelated Gaussian (white) action noise, which leads to jerky motions with locally constrained exploration. In contrast, temporally correlated coloured noise, particularly pink noise, has been shown to support more efficient exploration in RL. Motivated by these findings, we inquire whether scheduling changes to the noise colour over the course of training can outperform white noise for continuous control robotics. We perform a systematic study of 49 linear schedules between white and red noise, together with generalised state-dependent exploration (gSDE), on four sparse-reward manipulation tasks with a Fetch arm and a Shadow Dexterous Hand. We find that the noise colour at the end of training does not affect learning efficiency or end performance, whereas fading towards red noise halves the jerk of exploration in every task. Balancing learning efficiency, end performance and smoothness, red noise emerges as the preferred strategy: it learns as efficiently as pink noise with almost 2-fold less movement jerk. We therefore recommend exploration schedulers that fade towards red noise as the default for off-policy robot learning.

0.32

Systematically Exploring the Capabilities of GPT-6 Astra as Embodied Policies

cs.RO ·2026-09-29 ·Galbot Team, Xuchuan Chen, Xiaoqian Cheng, Yu Deng, Lihe Ding +29 more
highly cited similarity 0.74
Abstract

GPT-6 Astra exhibits a remarkable ability to generate numerical robot actions, extending its role beyond high-level planning. To assess Astra's capabilities as general-purpose embodied policies, we conduct comprehensive evaluations across six domains, examining direct control, cooperation with learned policies, and feedback-driven adaptation. In gripper manipulation, Astra can correct task targets and prepare contact conditions for subsequent policy execution; hybrid control with π0.5 achieves 48% success on the evaluated RoboDojo subset. In dexterous manipulation, hybrid control achieves 50% success in ten experience-guided DexJoCo trials, while direct in-hand control struggles to coordinate finger contacts. In mobile manipulation, hybrid control reaches 38.7% success on the evaluated RoboCasa365. In navigation, Astra leads our local comparisons, reaching 92% success on RxR instruction following and 82% on HM3D object search, although search incurs substantial detours. In locomotion, dense motion-reference generation remains unreliable: none of five sequential attempts on a single obstacle course reaches the goal, despite improvements in stability and forward progress. In humanoid loco-manipulation, Astra exceeds baseline methods on 13 of 30 HumanoidBench tasks with pretrained whole-body controllers. These findings reveal a gap between useful task decisions and reliable physical control. Inference latency further constrains practical control: across 50 RoboDojo instances per condition, policy-assisted and direct control consume 624.8 million and 1.132 billion tokens. A 30-second locomotion run requires 250 model calls averaging 39.86 seconds each, with physics paused during inference.

0.44

DexMimic: A Generalist Dexterous Hand-Object Tracking Policy via Value-Guided Reset Allocation

cs.RO cs.AI ·2026-10-13 ·Zhexi Luo, Zhixuan Xu, Rui Yang, Zeyu Xiao, Yiwen Hou +1 more
benchmarkcode/data similarity 0.74
Abstract · 13 pages, including 4 pages of supplementary material. v2: Updated author affiliations; scientific content unchanged. Project page: https://…

Achieving human-like dexterous manipulation remains a central challenge in robotics. Learning from human hand-object interaction (HOI) datasets offers a promising pathway to diverse dexterous skills, yet existing physics-based approaches train specialist policies for individual trajectories, thereby limiting skill reuse at scale. We introduce DexMimic, a generalist dexterous hand-object tracking policy jointly trained across diverse HOI trajectories. Efficient joint training requires allocating each rollout to both an undertrained phase and a starting state that supports continued tracking. DexMimic realizes this insight through Value-Guided Reset Allocation, which adapts the initialization distribution online to prioritize difficult phases and select reset states with higher expected tracking returns. We further introduce a benchmark spanning training, fine-tuning, and generalization. Experiments show improved tracking success and training efficiency, faster fine-tuning, and the potential for zero-shot generalization to unseen trajectories and objects; larger training sets further improve efficiency and generalization. Finally, we validate DexMimic on a real-world dexterous manipulation platform.

0.31

Contact-Guided Exploration for Non-Prehensile Locomanipulation with Multi-Critic RL

cs.RO ·2026-08-28 ·Simone Tolomei, Mayank Mittal, Franco Angelini, Manolo Garabini, Paolo Salaris +1 more
top venue similarity 0.73
Abstract · project website: https://tolomeis.github.io/contact-guided-exp Accepted in IEEE Robotics and Automation Letter (RA-L) 8 pages, 9 figures

Non-prehensile manipulation offers versatile skills for moving and rearranging heavy or bulky objects, particularly when combined with a mobile manipulation platform. However, both model-based and model-free approaches struggle with the complex hybrid dynamics and the sparsity of the contact in these tasks. To address these challenges, we propose a contact-guided exploration strategy implemented within a Multi-Critic Reinforcement Learning (RL) framework. A dedicated exploration critic is trained with a dense contact-seeking reward that guides the end-effector toward meaningful contact points; its influence is progressively decayed to recover a task-optimal policy. We obtain candidate interaction points from a general-purpose grasping algorithm, enabling the exploration mechanism to generalise across various object geometries. We evaluate the approach on multiple tasks, including box pushing, chair transportation, and a dishwasher opening task. Finally, we validate the chair transportation policy through extensive experiments on a quadrupedal mobile manipulator, demonstrating deployable non-prehensile manipulation in the real world.

0.37