CS Paper Radar

Leto: Fast In-Place Recovery for LLM Training on Surviving Hardware

Geon-Woo Kim, Joon Ha Kim, Daehyeok Kim

cs.DC cs.LG ·submitted 2026-09-30 20:29 UTC · v1

Abstract

Hardware-operable failures (HOFs) interrupt large language model (LLM) training but permit recovery on the same hardware without reset, repair, or replacement. Existing recovery systems nevertheless reload checkpoints, recompute lost progress, and rebuild process state, idling GPUs that could otherwise continue training. We present Leto, a fault-tolerant training system that leverages surviving hardware to enable efficient in-place recovery. Our key insight is that the state needed to resume training can be retained or prepared outside the active training process while remaining on the same hardware. Leto retains the working model state and the reusable process state, and preinitializes the remaining state in a shadow trainer. We devise two-tier erasure protection and chunk-level transactional updates to keep the retained model state recoverable and consistent, and reclaim the shadow state when active training needs its GPU memory. Evaluation on 6- and 72-GPU NVIDIA A100 clusters shows that Leto recovers 3.6--6.5$\times$ faster than the best-performing checkpointing baselines and improves productive training time by up to 13.7 percentage points. Large-scale simulation shows over 95% productive training time on a 131,072-GPU cluster.

Closest papers

Nearest neighbours by meaning across the whole index.

ZOCheck: CPU-Shadow Checkpointing for Zeroth-Order LLM Fine-Tuning

cs.DC ·2026-09-23 ·Minqiu Sun, Xin Huang, Luanzheng Guo, Nathan R. Tallent, Kento Sato +1 more
published similarity 0.73
Abstract · Accepted to SC26 (The International Conference for High Performance Computing, Networking, Storage and Analysis), 2026

Zeroth-order (ZO) optimization is an attractive option for memory-efficient LLM fine-tuning, but its fault tolerance remains underexplored. Unlike first-order training, ZO progress can be represented by lightweight seed-and-scalar step logs, yet naive log-only recovery still incurs replay cost that grows with training progress, and shortcut replay does not preserve the executed floating-point trajectory. We present ZOCheck, a fault-tolerant ZO training system that exploits this replayable structure through a CPU shadow process that continuously replays logged updates, materializes consistent recovery images off the GPU critical path, and persists them asynchronously. ZOCheck therefore combines non-blocking checkpointing during training with fast recovery from a near-current state. We also develop a cost model for choosing the snapshot policy under realistic failure rates. Experiments show that ZOCheck reduces checkpoint overhead by up to 219.7x and recovery latency by 1.55x on average compared with asynchronous full-state checkpointing, translating into up to 21.3x lower end-to-end wasted time across the evaluated failure rates, while preserving exact recovery behavior.

0.65

FailBench: Evaluating Fault Tolerance Across Distributed Training Architectures

cs.DC ·2026-10-06 ·Khaled Aljbab, Amine Barrak
similarity 0.67
Abstract

Distributed deep learning relies on data, pipeline, tensor, and hybrid parallelism, yet fault-tolerance mechanisms are typically evaluated only on the architecture for which they were designed. This leaves practitioners with little guidance when choosing mechanisms across architectures. FailBench provides a unified evaluation harness covering seven distributed training architectures, eight crash-fault-tolerance mechanisms and a no-FT baseline, and single, concurrent, and cascading fail-stop failures. We evaluate 142 (architecture, mechanism, trace) combinations on an 8xV100 cluster, with per-rank checkpoint states ranging from 205 MB to 2.7 GB. Three findings emerge. First, no mechanism is universally best: on A2, disk checkpointing has the lowest steady-state overhead (0.5%), in-memory replication restores fastest (~17 ms), and just-in-time checkpointing avoids periodic steady-state checkpoint cost but incurs ~0.9 s upon failure. When process-group re-formation takes seconds, mechanisms differ more in runtime overhead than restore speed. Second, gossip training increases sample throughput by 17.9% after losing a worker, yet shows no detectable improvement in loss progress over a matched no-fault baseline. Third, mechanism cost depends strongly on architecture: in-memory replication overhead ranges from 3.7% to 176%. We translate these findings into a decision framework for selecting fault-tolerance mechanisms and release FailBench as an open artifact.

0.18

Zero-I/O Fault Recovery for Sharded Deep Learning via Dynamic Framework Dependency Rebinding

cs.DC ·2026-09-16 ·Genlang Chen, Junyi Zhu
similarity 0.66
Abstract · 8 pages, 4 figures, 10 tables

Distributed model training at scale is frequently interrupted by transient network failures, conventionally forcing cluster managers to abort all processes and roll back to the latest checkpoint. While periodic checkpointing provides durability, frequent snapshotting introduces severe storage backpressure: our measurements on a 1.216B-parameter decoder reveal that per-update asynchronous checkpointing incurs up to a +656.7% latency overhead, consumes 32.5 GiB of host memory, and generates 3.39 TB/hour of storage traffic. To eliminate this overhead, we present AccelPact, a parallel runtime enabling zero-I/O in-memory fault recovery for sharded distributed training. When communication fails at a committed optimizer step, device memory remains quiescent and uncorrupted, yet continuation fails because frameworks like PyTorch FSDP cache internal communication handles across module wrappers and parameter hierarchies. AccelPact resolves this dependency invalidation via a non-invasive reference-rebinding mechanism coordinated by an out-of-band Gloo consensus protocol. On 16 NVIDIA RTX 5880 GPUs training full-parameter Mistral-7B, AccelPact eliminates checkpoint replay, yielding a 1.197x whole-run goodput improvement over cold restart and 1.194x over NVRx checkpoint restoration at checkpoint age 5, rising to 1.698x at age 18. Across ten successive fault injections, all 16 ranks maintain bit-identical parameter state with zero numerical drift. Across 4-to-16 GPU cluster topologies, reference rebinding executes in constant time (0.493-0.518 ms). Operating directly on native communicator instances, AccelPact requires zero application-code modifications and avoids compiler graph breaks under torch.compile, providing an efficient foundation for resilient deep learning.

0.27

LayerCheck: Adaptive Layer-wise Checkpointing for Large Language Model Post-training

cs.DC ·2026-09-23 ·Minqiu Sun, Xin Huang, Luanzheng Guo, Nathan R. Tallent, Kento Sato +1 more
publishedcode/data similarity 0.66
Abstract · Accepted to the 2026 IEEE International Conference on Cluster Computing (CLUSTER 2026). 19 pages, 8 figures, 3 tables

With the rising computational and monetary costs of training large language models (LLMs), checkpointing---periodically storing model states for recovery---becomes essential for fault tolerance. Conventional checkpointing entails a severe trade-off between checkpoint frequency (I/O overhead) and computational recovery (recovery time). State-of-the-art approaches mitigate this cost through pipelining checkpoint I/Os, differential checkpointing, or in-memory persistence, yet none leverage the distinct characteristics of LLM training dynamics, where model weight updates are non-uniformly distributed across transformer layers. This observation implies that saving all weights each time might not be efficient. Inspired by this observation, we present LayerCheck, a layer-wise adaptive checkpointing framework that selectively persists layers whose updates exceed a threshold. This design avoids periodic I/O bursts by distributing layer-wise checkpoint writes over time, resulting in smoother and more balanced I/O profiles. Upon recovery, LayerCheck reconstructs a mixed-timestamp composite model state by aggregating the most recently persisted versions of each layer together with their matching optimizer states. Under a bounded per-layer staleness guard, this introduces a controlled perturbation: under standard Adam assumptions it adds a bounded staleness term, and empirically the post-restart loss deviates from the failure-free trajectory by at most 0.54%. Empirical results on multiple open-source LLMs with different datasets further demonstrate that recovered models preserve the original convergence behavior and accuracy while substantially reducing checkpoint overheads. Specifically, LayerCheck achieves up to 22.6x reduction in total checkpoint size and 1.31x reduction in end-to-end training time compared to state-of-the-art systems, significantly lowering the cost of checkpointing.

0.61

Fast Recovery for LLM Serving via Decoupled Device Memory Lifetime in Dynamo

cs.DC ·2026-09-21 ·Schwinn Saereesitthipitak, Mohammed Abdulwahhab, Hannah Zhang, Dan Feigin, Neelay Shah +4 more
positioncode/data similarity 0.65
Abstract · 16 pages, 12 figures. Open-source implementations: https://github.com/ai-dynamo/dynamo and https://github.com/ai-dynamo/snapshot

Large language model (LLM) inference replicas run across tightly coupled GPUs and serve traffic continuously for weeks. Hardware and software failures are therefore inevitable, and one worker failure can disrupt an entire replica. Recovery requires reinitializing the engine, taking minutes even when weights and compilation artifacts are cached. Production deployments overprovision serving capacity to mask this window. We argue that the dominant cost is loss of ready serving capacity, not request progress, so recovery should preserve initialized engine state rather than reconstruct it. We present fast recovery for Dynamo based on this principle. Snapshots capture an initialized engine once and restore it instead of reinitializing it. Analysis of 18 weeks of failures from the Dynamo cluster shows that most failures are device-preserving: the engine process fails while the GPU and its resident allocations remain intact. Our key insight is that independent engine processes can reuse the same GPU-resident state while keeping mutable execution state private. The GPU Memory Service (GMS) decouples device-memory ownership from engine processes, enabling engines to share and reattach surviving allocations without copying them. GMS preserves model weights and shares them read-only between replacement and Shadow Engines, avoiding weight reloads. A second initialized runtime on the same GPUs reduces recovery to promotion. Across four models on vLLM and SGLang, these mechanisms recover a failed replica in under 7 seconds, 13-29 times faster than a warm restart, using a fixed 4-8 GiB of device memory per GPU independent of model size. Replaying the production trace, we estimate they would reclaim 79% of GPU-hours lost to recovery.

0.39

LazyTrain: Limited-resource Allocation toward Zero-waste Yield Optimization in Large Language Model Training

cs.CL ·2026-08-12 ·Xiaojun Wu, Cehao Yang, Honghao Liu, Xueyuan Lin, Xuhui Jiang +3 more
code/data similarity 0.64
Abstract · 18 pages, 8 figures

Training large language models on limited hardware is increasingly a scheduling problem across GPU compute, host memory, PCIe transfer, and storage bandwidth. Existing offloading systems reduce GPU residency, and MegaTrain shows that a CPU-master layer-streaming executor can train large models on a single GPU, but fixed checkpointing and placement heuristics still leave communication exposed on the critical path. We propose LazyTrain, an optimization layer over a layer-streaming executor. LazyTrain formulates checkpoint selection, activation placement, recomputation, and CPU-GPU-NVMe communication overlap as a mixed-integer scheduling problem, then executes the solved policy during training. It further couples 8-bit optimizer states with fast gradient clipping as a single Hybrid 8-bit operator: state compression reduces optimizer-state memory, while fast clipping counteracts the additional CPU-side update overhead. Across H800 experiments from Qwen2.5-3B to Qwen3.6-27B, LazyTrain improves sustained TFLOPS over matched baselines runs by approximately 1.24$\times$; RTX 3090 experiments likewise increase the maximum feasible batch size by one at each model scale. In the primary Qwen3.6-27B H800 MetaMathQA run, LazyTrain reaches 219.95 TFLOPS and 1361 tokens/s at batch size 72, peaks at 68.84\,GB of GPU memory, and obtains 95.42\% exact-match accuracy on the full evaluation split. The source code is available at https://github.com/DataArcTech/LazyTrain.

0.65

CUA-Recovery: Benchmarking Error Recovery in Long-Horizon Computer-Use Agents

cs.AI cs.CLcs.LG ·2026-10-20 ·Xu Hu, Haoming Li, Yuxiang Wang, Jinxin Yang, Kangshuo Li +9 more
benchmarkcode/data similarity 0.63
Abstract · 33 pages, 13 figures, 18 tables

As computer-use agents (CUAs) move to long-horizon workflows spanning multiple applications, undetected errors can silently corrupt persistent state and cause cascading failures in subsequent actions. Reliable error detection and recovery have become critical bottlenecks for building robust CUAs. However, existing benchmarks focus primarily on end-to-end task performance, providing limited insight into whether agents can detect and recover from errors during execution. The few benchmarks that evaluate recovery rely largely on manually injected errors, which may not reflect the types or horizons of failures induced by real agent policies. We introduce CUA-Recovery, a benchmark comprising test and training suites across multiple desktop applications. We construct it using ReRail, a framework for synthesizing long-horizon tasks and trajectories in a persistent desktop environment. ReRail composes MyPCBench tasks into new long-horizon workflows with executable ground truth, collects verifier-confirmed failures from multiple policies, and turns them into verified recovery trajectories. CUA-Recovery comprises a human-verified test suite of 2,250 erroneous states over 100 tasks and a training suite of 8.6K trajectories over 377 tasks. Evaluation on the test suite shows that agents struggle both to recognize inherited errors and to complete the task. Across six agents and six takeover depths, Error Awareness Rate (EAR) reaches at most 44.0% and Pass@3 at most 25.5%. After fine-tuning Qwen3.5-35B-A3B on the training suite, its average EAR rises from 19.9% to 35.2% on held-out recovery states, and its Rubric Score goes from 5.0% to 16.1%. It also gains 15.3 points on MyPCBench and 10.8 points on Odysseys for Pass@3, showing that the training trajectories help both with recovery and with completing tasks from a clean start. Our code is available at https://github.com/xu-hu-2002/CUA-Recovery.

0.34

Nereus: Adaptive Parallelism for LLM Post-Training

cs.DC cs.AI ·2026-09-28 ·Songlin Jiang, Tuo Shi, Sitong Zhang, Zeke Wang, Mario Di Francesco +1 more
similarity 0.63
Abstract

Reinforcement learning (RL) post-training for large language models (LLMs) coordinates multiple models across generation, inference, and training on GPU clusters. Several factors may change during a run, including resource availability, sequence length, memory pressure, and stage bottlenecks. As a consequence, an execution plan that was initially suitable can then become slow or even infeasible over time. However, adapting a job whose models share GPUs entails significant challenges: deciding whether a new plan is worth the transition cost, reusing the job's distributed state, and coordinating GPU transfers across models and stages. Nereus targets these challenges as a cost-aware runtime that adapts RL post-training jobs into efficient execution plans. Its low-overhead controller selects a memory-feasible global plan and admits the transition using a cost model calibrated against the running job. To estimate and execute a transition, Nereus represents the distributed state of each replica of a model-stage (one model in one stage) as an Elastic Model Unit. It then employs a global transition graph to order the transformations and GPU transfers of these units. In a trace built from real data, online TP/PP adaptation reduces average step latency by 27.7% relative to the initial fixed TP/PP layout with DP scaling. In a 1,000-step run reaching 1,024 GPUs, six transitions consume 0.079% of total run time. Nereus improves end-to-end 8B PPO throughput by 2.14--7.27$\times$ over OpenRLHF and by 1.10--1.47$\times$ over Verl across diverse clusters.

0.45