CS Paper Radar

Comparing a gradient boosting algorithm to the GOES FDC for wildfire detection

Asaf Vanunu, Boaz Nadler, Arnon Karnieli

cs.CV cs.LG ·submitted 2026-10-01 16:29 UTC · v1

Abstract

Wildfires pose severe risks to human life, ecosystems, and property. This study presents a machine learning approach for wildfire detection from GOES ABI imagery. A CatBoost model was trained on a large dataset with thousands of ABI images and over 300,000 matching VIIRS fire detections. An evaluation on a separate dataset across five regions showed that the learned CatBoost model outperformed the operational GOES Fire Detection and Characterization (FDC) product. It achieved higher precision, recall, and F1 scores both within and outside the training area. The CatBoost model achieved F1 scores that were 0.16 to 0.38 higher than the GOES FDC in all regions. In addition, out of 51 historical fire events, the CatBoost detected 26 fires before both VIIRS and GOES FDC, compared to only six earlier detections by the GOES FDC. Importantly, the CatBoost model achieved accurate wildfire detection also during nighttime, whereas the GOES FDC obtained very low recall values, around 0.03. This study demonstrates that machine learning models may offer significant improvements over existing geostationary fire products, including higher accuracy, fewer false alarms, and earlier detection.

Closest papers

Nearest neighbours by meaning across the whole index.

Construction and Evaluation of Machine Learning Models for Near-Real-Time Fire Detection from MTG FCI Imagery

cs.CV ·2026-10-04 ·Asaf Vanunu, Boaz Nadler, Arnon Karnieli
code/data similarity 0.81
Abstract

Geostationary satellite observations are important for wildfire detection and monitoring. The current study evaluates machine learning models for MTG FCI near-real-time fire detection in 1- and 2-km spatial configurations and compares them with threshold-based algorithms. The models were trained and evaluated using VIIRS fire reference data across diverse ecological regions in Europe, Africa, and the Middle East. The key results are that 1-km models significantly outperform both their 2-km variants and operational threshold products. The constructed 1-km models achieved F1 scores higher by up to 0.36 compared to baseline products. Importantly, the 1-km models detected small fires with higher probability compared to competing models. Finally, the models robustly detected fires up to 260 min earlier than baseline products. To support opensource applications, our trained models are publicly available.

0.22

Modular Deep Learning Mechanisms for Auditable Next-Day Wildfire Spread Prediction

cs.LG ·2026-09-15 ·Miguel Esparza, Aydin Ayanzadeh, Ahmad Mousavi, Ali Mostafavi
benchmark similarity 0.68
Abstract

Next-day wildfire prediction requires models whose forecasts can be evaluated alongside the assumptions and historical evidence used in their computation. Although deep learning can learn spatial patterns from remote-sensing data, predictive performance alone does not establish physical fidelity or operational trustworthiness. This study investigates three modular augmentations for next-day active-fire prediction: wind- and slope-conditioned attention biases, physics-feature retrieval-augmented output correction, and fire conditioned dual-stream gating. The attention biases expose prescribed directional preferences, while the retrieval module selects historical tiles using a nine-dimensional environmental and fire-state descriptor and applies a learned correction to a frozen model's logits. The modules are evaluated across five backbones on the Next Day Wildfire Spread benchmark, using staged ablations, directional audits, retrieval perturbations, calibration measures, and computational comparisons. The three-seed mean F1 score and area under the precision--recall curve (AUC-PR) of a SwinUNETR model with all three augmentations are 0.4216 and 0.3673. Then, a mixed ensemble (two augmented architectures and one non-augmented architecture) model achieves 0.4292 and 0.3790. Benefits vary across architectures, and retrieval-related improvements in AUC-PR do not consistently translate into higher F1. The constructed wind bias aligns closely with input wind, but its alignment with observed next-day fire displacement is much weaker, distinguishing prior inspectability from predictive physical fidelity. The study contributes a framework for exposing and evaluating selected domain-informed components within wildfire prediction models. Together, the results presented show that predictive performance, operational trustworthiness, and computational practicality need not be competing objectives.

0.41

Annual Earth-observation embeddings encode wildfire disturbance and support simplified burned area mapping

cs.CV ·2026-09-22 ·Jovana Knezevic, Clement Atzberger, Zhengpeng Feng, Adam F. A. Pellegrini, Srinivasan Keshav +1 more
benchmark similarity 0.66
Abstract

Medium-resolution (10-30 m) burned area mapping is vital for monitoring wildfires and their impacts, but remains difficult to scale. Existing methods require either curated fire-specific imagery or dense time-series analysis. Here, we tested whether annual Earth-observation embeddings retain wildfire disturbance signals sufficiently to map burned areas without either requirement. Using Tessera and AlphaEarth embeddings, we tested individual burn-scar delineation, mapping of all same-year fires within an area, regional wall-to-wall mapping, cross-continental transfer, and intra-annual fire timing. Tessera strongly encoded wildfire disturbance, allowing even linear models to separate burned from unburned pixels; the signal was weaker in AlphaEarth. Models trained on a single Tessera embedding matched or exceeded equivalent models using paired pre- and post-fire HLS imagery, and outperformed post-fire imagery alone. The same approach mapped all same-year fires within benchmark scenes (F1 = 0.90). Applied across California, with no California fire data used for downstream training, it recovered 97% of reference burned area and detected substantially more small and medium-sized fires than GABAM or MCD64A1. Separately, a model trained on 2018-2021 US fires transferred without retraining to 88 European fires from 2024-2025 (F1 = 0.88). For well-detected fires, ignition timing was recovered with a mean absolute error of 13 days. Performance declined for fires ignited near the end of the calendar year, and wall-to-wall deployment produced systematic false positives in some unseen landscapes. Annual embeddings nevertheless achieve high segmentation accuracy while moving the burden of dense time series processing upstream, providing a promising path towards simpler regional burned area mapping.

0.14

WildfireSpreadBench: The Metric Decides the Model in Wildfire Spread Prediction

cs.LG cs.CV ·2026-08-29 ·Arin Gopakumar, Marco Pannozzo
published similarity 0.66
Abstract · NeurIPS 2026: Tackling Climate Change with Machine Learning Workshop. 12 pages, 2 figures, 5 tables

Machine learning is being increasingly used to predict where active wildfires will burn the following day, helping inform evacuation boundaries and containment lines. Most models are evaluated using Average Precision (AP), which summarizes performance across all decision thresholds, although acting on a forecast requires choosing one. We benchmarked five discriminative architectures and one generative model on WildfireSpreadTS using a shared evaluation pipeline and two input configurations. We found that model rankings varied depending on whether performance was measured by AP or by threshold-dependent metrics like F1 and IoU. At the default 0.5 threshold, the highest-AP model flagged 4 to 5 times the observed active-fire area and ranked fifth of six on F1 and IoU, and the most recall-heavy model flagged 16 to 23 times. The three models whose flagged area stayed close to the observed area had AP scores 24 to 37% lower. Across models, we identified three distinct prediction profiles: over-predicting, balanced, and under-predicting, which AP alone could not distinguish. Expanding the input from 7 to 23 channels changed AP by 0.03 on average, against a 0.21 to 0.24 spread across models. Ultimately, these results show that AP alone can favor models whose predictions are poorly suited for operational wildfire forecasting.

0.48

Obscured Wildfire Flame Detection by Spatio-temporal Analysis of Smoke Patterns Using Frame-wise Transformers

cs.CV cs.AI ·2026-11-10 ·Uma Meleti, Abolfazl Razi, Fatemeh Afghah
top venuehot direction similarity 0.65
Abstract · 8 pages, 8 figures. Published in the 2024 20th International Conference on Distributed Computing in Smart Systems and the Internet of Things…

In this paper, we propose a new paradigm in wildfire management for detecting both visible and obscured fire using Deep Learning (DL). The essence of our method is the joint spatial and temporal analysis of RGB videos, embracing the fact that temporal patterns of smoke motions in consecutive video frames can indicate obscured fire flames. This perspective contrasts the traditional approach of independently analyzing images and individual video frames. To this end, we propose a frame-wise transformer architecture that applies an attention mechanism between the consecutive frames while preserving spatial information within frames as opposed to regular attention mechanisms like the non-local block, which combines spatial and temporal information into a single vector. We also optimize the temporal pattern lengths under different spatial resolutions to achieve the highest performance while reducing the computational cost. To investigate the applicability of our method in aerial image processing, we applied it to a curated version of the FLAME2 dataset that includes dual-mode RGB/IR videos. The IR video feed is used to extract ground truth, while the model is trained only on RGB videos to maintain applicability to lowcost commercial drones (which are equipped only with regular cameras) and facilitate processing existing RGB-only datasets. Our proposed method achieves a Segmentation Foreground Dice score of 92.61%, an Object Detection Precision and Recall rate of 93.21% and 91.73%, and clip-level classification accuracy of 98.02%, respectively. We also investigated the efficacy and generalizability of our method through ablation study

0.53

A Sentinel-2 benchmark dataset for deep-learning active-fire segmentation across 25 California wildfires, July 2020-August 2026

eess.IV cs.CVcs.LGeess.SP+1 ·2026-09-14 ·Shreyan Mitra, Mohammadreza Narimani, Parastoo Farajpoor
publishedbenchmarkcode/datahot direction similarity 0.64
Abstract · 13 pages, 9 figures, 5 tables. Published in Data in Brief (Elsevier), Volume 69, Article 113357 (2026). Data: https://doi.org/10.5281/zenodo…

This article describes an open image dataset for developing and evaluating active-fire segmentation methods in satellite imagery. The dataset contains 2,148 image-mask pairs from 25 California wildfires, with acquisitions spanning July 2020 to August 2026. Each image is a 512x512-pixel, three-channel composite derived from Sentinel-2 Level-2A bands B12, B11 and B8A at 20 m spatial sampling. A fixed linear rendering is applied throughout the dataset. Corresponding masks distinguish background, SWIR-rule active fire and invalid observations. The masks were generated from shortwave-infrared brightness and near-infrared contrast, followed by constrained neighborhood growth. The release includes chip-level metadata and an incident-disjoint partition containing 18 training, three validation and four test fires. Among the image pairs, 841 contain active-fire labels; these labels occupy 0.0766% of all grid cells. A mask-blind analyst review covers 233 test chips and provides a separate assessment of the rule-generated labels at chip and connected-component levels. Reference training and evaluation code accompanies the data, including a ResNet-34 U-Net implementation with validation-based checkpoint and threshold selection. The archived images, masks, metadata and review annotations support research on rare-class segmentation, learning from algorithmic labels and transfer across fire incidents. The versioned dataset is deposited on Zenodo, with preparation and reuse software maintained in a public GitHub repository.

0.73

Scale-based Approach for Active Wildfire Segmentation on Satellite Imagery

cs.CV ·2026-09-01 ·Matheus F. Kovaleski, Cristiano Premebida, João Ruivo Paulo
similarity 0.64
Abstract · 6 page, 2 figures, 3 tables

Active wildfire mapping from satellite imagery is challenging due to the sparse and highly imbalanced nature of fire pixels, especially in early-stage or low-density fire observations. This work investigates the use of multispectral Landsat-8 imagery for active-fire segmentation under multi-scale wildfire size conditions. We propose a data-driven protocol to characterize fire-region size distributions through connected-component analysis and an interquartile range criterion, enabling the evaluation of model robustness across different local fire-region densities. Three segmentation architectures, U-Net, DeepLabV3+, and SegFormer, are evaluated under different SWIR-based spectral configurations. Results show that U-Net achieves the strongest robustness across the evaluated conditions, SegFormer provides competitive performance, and DeepLabV3+ tends to produce conservative predictions with reduced recall. Across architectures, SWIR2 consistently achieves the strongest or near-best results, highlighting its importance for active-fire segmentation in Landsat-8 imagery. These findings suggest that both spectral band selection and architectural design are critical for robust satellite-based active wildfire mapping trained on low active fire-pixel density images.

0.23

Machine Learning for Near Real-Time Identification of Wildfire Burned Areas

cs.LG cs.CVeess.IV ·2026-11-15 ·Khoi Nguyen, Adam W. Bargteil, Milton Halem
similarity 0.63
Abstract

In this article, we present a near real-time method that estimates burned probability anywhere in the world using satellite images. Our approach takes advantage of the state-of-the-art pix2pix model to translate a preprocessed index calculated from Landsat 8/9 images into an approximate of USGS Burn Probability indicating per pixel burn probability. Since this is a machine learning-based approach, it can be automated with a minimum amount of human intervention with significantly less time delays and geographic restrictions compared to other contemporary methods. We include results from our experiments and compare our approximation with the USGS Burn Probability using RMSE score.

0.21