CS Paper Radar

Cross-Site Transfer and Spatial Forgetting in OTA-Trained Neural Receivers

Riku Luostari, Dani Korpi, Harri Holma, Olav Tirkkonen

eess.SP ·submitted 2026-10-01 23:14 UTC · v2

Abstract

Most published neural-receiver studies train on synthetic channel models, although real over-the-air measurements can improve performance. We examine how much of this benefit transfers from other sites to a distinctly different deployment site and what adaptation to that site costs elsewhere. The study uses a dataset from a 5.88 GHz measurement campaign covering eight sites and four environment types. An industrial site measured entirely from a vehicle is withheld as a deliberate transfer stress test. One receiver architecture is trained under four regimes: simulation alone; seven other sites; all sites jointly; and other-site training followed by deployment-site finetuning. The last two use identical measurements through different optimization protocols. Across five independently trained seeds, sensitivity gains are evaluated at uncoded bit error rate (BER) targets of $10^{-1}$ and $10^{-2}$, representative of moderate- and higher-rate coded links, respectively. On the deployment site, training with other-site data rather than simulation improves sensitivity by 0.3 dB at $10^{-1}$ and 0.1 dB at $10^{-2}$. Adding deployment-site data contributes less than 0.1 dB at $10^{-1}$; at $10^{-2}$, total gains over simulation reach 0.4 dB with joint training and 0.6 dB with finetuning. Joint training shows no measurable aggregate loss on the other-site test set, whereas finetuning yields the larger deployment-site gain but reduces other-site sensitivity by about 0.1 dB at $10^{-2}$, indicating spatial forgetting.

Closest papers

Nearest neighbours by meaning across the whole index.

On the Impact of Site-Specific Training for a Real-World 5G NR System

cs.IT eess.SP ·2026-09-03 ·Reinhard Wiesmayr, Nuri Berke Baytekin, Chris Dick, Christoph Studer
publishedcode/data similarity 0.68
Abstract · This work has been accepted for presentation at the 60th Asilomar Conference on Signals, Systems, and Computers 2026

Site-specific training can improve wireless receiver performance without increasing computational complexity. However, real-world results have so far focused on fully trainable neural receivers and single-layer transmissions. We study site-specific finetuning of three receiver architectures: fully trainable neural, model-driven neural, and model-based. We train and evaluate these receivers using new measurements from a standard-compliant 5G NR testbed at ETH Zurich with dual-layer uplink transmission, including measurement campaigns conducted more than six months apart. Our results show that site-specific finetuning (i) substantially improves fully trainable and model-driven neural receivers, while resulting in only marginal gains for the less tunable model-based receiver; (ii) enables a single neural receiver jointly finetuned for single- and dual-layer transmission to closely match receivers finetuned separately for each configuration; and (iii) remains effective across measurement campaigns separated by more than six months. We also investigate site-specific linear minimum mean-square error channel estimation using covariance matrices estimated from either synthetic channels or site-specific measurements. When combined with iterative detection and decoding, site-specific channel estimation achieves the lowest error rate observed in our datasets. Our finetuning code and measurement datasets are publicly available at https://github.com/IIP-Group/site_specific_training

0.48

Input-Correlated Supervision Noise Limits the Benefits of OTA Training for Learned Receivers

eess.SP ·2026-08-13 ·Riku Luostari, Dani Korpi, Olav Tirkkonen, Harri Holma
similarity 0.62
Abstract

While learned wireless receivers are typically studied using synthetic data, the impact of over-the-air (OTA) measurements for training remains unclear. We conducted a 5.88 GHz measurement campaign with a 5G/6G-like orthogonal frequency-division multiplexing (OFDM) system across diverse environments and mobility conditions, and trained a neural channel estimator and a capacity-matched end-to-end neural receiver using mixtures of measured and synthetic data. Increasing the OTA fraction revealed a fundamental asymmetry: measured data consistently improved the end-to-end receiver, whereas the channel estimator peaked at an intermediate fraction and degraded with fully measured training. We identified supervision quality as a key contributor: OTA channel labels are derived from noisy received signals and therefore contain supervision errors correlated with the receiver input, whereas decoded bits validated by a cyclic redundancy check (CRC) provide effectively error-free supervision. Denoising the channel labels mitigated the degradation, and a controlled simulation showed that label noise of equal power degrades the estimator far more when it is correlated with the input. For OTA training, end-to-end receivers thus benefit from fully measured data, whereas channel estimators benefit from moderate OTA fractions but require improved label quality.

0.38

HELENA for 5G NR LEO NTN Channel Estimation: A Comparative Evaluation

eess.SP cs.LGcs.NIcs.PF ·2026-09-13 ·Miguel Camelo Botero, Nina Slamnik-Kriještorac, Johann Marquez-Barja
similarity 0.56
Abstract

Deep Learning (DL)-based channel estimation has shown high accuracy and low latency in terrestrial 5G NR, but Low Earth Orbit (LEO) Non-Terrestrial Networks (NTNs) introduce Doppler and synchronization impairments that may require NTN-specific architectures. We test whether High-Efficiency Learning-based channel Estimation using dual Neural Attention (HELENA), originally designed for terrestrial channels, remains effective after NTN retraining and suitable across high-performance and power-constrained inference platforms. Its unchanged architecture is trained on paired receiver-compensated (NTN-1) and residual-impaired (NTN-2) datasets and compared with eight terrestrial-origin models trained on the same NTN data and the NTN-specific MDELAN-SISO. HELENA achieves the lowest observed SNR-averaged NMSE among the DL estimators in both conditions, including 55.8-62.7% lower linear-scale NMSE than MDELAN-SISO. All DL models degrade in NTN-2, demonstrating the challenge posed by residual Doppler and its associated impairments. On an RTX PRO 4500, HELENA achieves 0.0595 ms 99th-percentile (P99) inference latency, 88.1% below the 0.5 ms budget, with lower energy than its closest attention-based competitors. On a 10 W Jetson Orin NX, it retains a favorable accuracy-energy trade-off, but no model meets the P99 budget. Thus, HELENA needs no NTN-specific redesign for the evaluated task, while embedded tail latency remains an open challenge.

0.16

CacheLink: Functional KV Transport for Zero-Prefill Cross-Model Context Handoff

cs.LG cs.AI ·2026-10-11 ·Haomiao Qiu, Yining Tang, Zijia Song, Ruizi Han, Ziyue Qiao +1 more
similarity 0.56
Abstract

KV caches make long-context serving efficient by reusing past computation, but model switching breaks this reuse and forces the receiver to prefill the context again. We study \emph{zero-prefill cross-model context handoff}: translating a sender cache into a receiver-compatible state so that the receiver can continue directly without prefilling same context. Existing affine transport methods show that receiver KV states can be substantially reconstructed from sender caches. However, through extensive analyses, we find that reconstruction fidelity is a poor proxy for receiver utility. Similar K/V reconstruction errors can lead to substantially different attention patterns, predictive distributions, and downstream accuracy, because conventional reconstruction objectives overlook the query-dependent functional importance of K and V in receiver attention. We thus introduce CACHELINK, which learns a coupled K/V correction through the receiver behavior directly. Across four independently trained sender--receiver pairs and seven evaluation panels, CACHELINK improves the equal-weight mean over all methods for every pair. In matched diagnostics, CACHELINK changes K/V squared error by less than 0.4% while substantially changing receiver attention and next-token behavior. At 32K context, it reduces handoff latency by up to $7.27\times$ relative to receiver re-prefill. Our findings verify that reconstruction fidelity alone is insufficient and that preserving the receiver computation induced by the transported cache is important for effective cross-model KV transport.

0.42

Design and Over-the-Air Evaluation of a Digital Twin-Driven Site-Specific Neural Receiver for 5G NR on NVIDIA DGX Spark

eess.SP ·2026-11-10 ·Qiuyuan Chen, Chengyang Yao, Liuchang Zhuo, Yuquan Sun, Cunhua Pan +2 more
hot direction similarity 0.55
Abstract

We design and evaluate a site-specific neural receiver for the 5G New Radio (NR) uplink. A corridor digital twin built from a radar scan and refined manually provides 28,671 ray-traced channel records for training an eight-round convolutional graph neural network with pilot-aware inputs and auxiliary channel supervision. The GPU on NVIDIA DGX Spark evaluates time--frequency convolutions in parallel across the received grid to accelerate inference. The receiver uses the standard NR uplink waveform and reference signals and feeds soft bits to the existing transport-block decoder. In over-the-air tests with NI USRP B210 radios under common radio settings, the site-trained receiver achieves the highest mean uplink rate at all five positions. At a non-line-of-sight corner, it reaches 16.2 Mb/s, compared with 4.1 Mb/s for the conventional receiver and 2.4 Mb/s for the 3GPP-trained neural receiver. These results demonstrate the feasibility of integrating neural reception into the 5G NR physical layer and show its potential for AI-RAN deployments.

0.27

Measurement-Calibrated Synthetic Pretraining for Rapid Adaptation of UAV Channel Predictors

eess.SP cs.LG ·2026-11-12 ·Qiuheng Zhou, Wei Jiang, Donglin Wang, Hans D. Schotten
published similarity 0.55
Abstract · 6 pages. Accepted version of a paper presented at the 2026 IEEE 104th Vehicular Technology Conference (VTC2026-Fall), Boston, MA, USA

Unmanned aerial vehicle (UAV) links can change faster than route-specific channel data can be collected, so a channel predictor must often be adapted from only a short target-flight calibration segment. This paper studies measurement-calibrated synthetic pretraining as an offline source prior for rapid adaptation of channel state information (CSI) predictors. The synthetic source is calibrated to flight-only power evolution, temporal shape variation, frequency selectivity, and phase disturbance, and is then combined with measured source-flight fine-tuning before target-flight adaptation. Under chronological held-out flight splits, synthetic-to-real (S2R) fine-tuning reduces the measured-data budget needed to reach useful prediction in the low-data regime. For 50 ms-ahead prediction, it crosses a latest-channel-estimate persistence baseline with 50 measured training windows, roughly 0.5 s of 10 ms-spaced supervised windows, whereas training from scratch requires 600 windows. A target-prefix adaptation study further shows that a lightweight gated recurrent unit predictor can reuse the pretrained source prior with one prediction-layer update epoch, positioning measurement-calibrated synthetic pretraining as a reusable prior for scarce target-flight measurements.

0.40

Do Ray-Traced Cities Make a Better Channel Prior for an Unseen Site? A Pre-Registered Study in Simulation, and a Test on Measured Channels that Reverses It

cs.LG cs.ITeess.SP ·2026-11-03 ·Krish Patel
similarity 0.54
Abstract · 11 pages, 3 figures, 3 tables

Channel estimators at a newly deployed base station usually start from 3GPP stochastic channel models, which describe no particular street. We ask whether a channel prior pooled from many ray-traced cities serves an unseen site better than the 3GPP CDL models, and whether learned estimators make the difference. With Sionna RT on 14 city scenes, LMMSE estimation from covariance priors, leave-one-city-out evaluation, and pass/fail bars written down before each main experiment, we find in simulation that the pooled prior sits about 0.6 dB from a site-trained estimator with no site measurements, about what CDL reaches after 50 measurements. Learned models added little: at most 0.65 dB in estimation, and in channel prediction a simple classical method beat CNN predictors by 1.8-12 dB from 2 ms ahead. On measured channels from the DICHASUS outdoor dataset (1.272 GHz, three 2x8 arrays on one building) the result reversed: the pooled ray-traced prior was 3.2-4.1 dB worse than CDL. The simulated channels were too clean; with users at the real distances, even a scattering level tuned from 50 site measurements left the prior about 2 dB behind CDL. A pre-registered follow-on on two more measured environments found the generic CDL prior 2.1-4.7 dB from a site-trained one: no further in a factory hall than on the street, furthest in a small lab room. Finally, a hallway model calibrated to measurements by differentiable ray tracing reproduced delay spread, but as a prior in an unmeasured part of the hallway it was 4.5 dB worse than CDL on the full array. All measured results come from one sounder.

0.33

Cross-Area Transfer Learning for VLC-based Indoor Localization with a Transfer Efficiency Score

cs.LG eess.SP ·2026-10-21 ·Masood Jan, Wafa Njima, Xun Zhang, Alexander Artemenko
published similarity 0.54
Abstract

Indoor localization systems are critical for Industry-4.0 applications. Visible Light Communication (VLC)-based systems offer advantages such as immunity to electromagnetic interference, high accuracy, and energy efficiency, but their performance is hindered by environmental variability across deployment areas. This paper presents a transfer learning (TL) framework for VLC-based indoor localization that enhances cross-area robustness while reducing data requirements. Using real-world measurements from four distinct areas of a Bosch manufacturing facility, we show that fine-tuning a deep neural network (DNN) pre-trained on source area data with only 40% of target-area measurements recovers 97% of full-data performance, thereby reducing the amount of target data needed. We further introduce the Transfer Efficiency Score (TES), a composite metric that identifies the most effective source models for transfer without exhaustive evaluation. Guided by TES, the framework selects the best source model, yielding localization errors as low as 40.9 cm with success rates above 86%. Validation on an unseen area confirms its generalization capability, with a 3.28 cm mean error achieved using the TES-selected source model. Overall, the proposed framework provides a scalable and data-efficient pathway for industrial VLC localization, substantially reducing deployment costs and computational burden while maintaining high accuracy in diverse and dynamic environments.

0.36