CS Paper Radar

Design and Over-the-Air Evaluation of a Digital Twin-Driven Site-Specific Neural Receiver for 5G NR on NVIDIA DGX Spark

Qiuyuan Chen, Chengyang Yao, Liuchang Zhuo, Yuquan Sun, Cunhua Pan, Hong Ren, Jiangzhou Wang

eess.SP ·submitted 2026-11-10 03:03 UTC · v1
hot direction

Abstract

We design and evaluate a site-specific neural receiver for the 5G New Radio (NR) uplink. A corridor digital twin built from a radar scan and refined manually provides 28,671 ray-traced channel records for training an eight-round convolutional graph neural network with pilot-aware inputs and auxiliary channel supervision. The GPU on NVIDIA DGX Spark evaluates time--frequency convolutions in parallel across the received grid to accelerate inference. The receiver uses the standard NR uplink waveform and reference signals and feeds soft bits to the existing transport-block decoder. In over-the-air tests with NI USRP B210 radios under common radio settings, the site-trained receiver achieves the highest mean uplink rate at all five positions. At a non-line-of-sight corner, it reaches 16.2 Mb/s, compared with 4.1 Mb/s for the conventional receiver and 2.4 Mb/s for the 3GPP-trained neural receiver. These results demonstrate the feasibility of integrating neural reception into the 5G NR physical layer and show its potential for AI-RAN deployments.

Closest papers

Nearest neighbours by meaning across the whole index.

On the Impact of Site-Specific Training for a Real-World 5G NR System

cs.IT eess.SP ·2026-09-03 ·Reinhard Wiesmayr, Nuri Berke Baytekin, Chris Dick, Christoph Studer
publishedcode/data similarity 0.68
Abstract · This work has been accepted for presentation at the 60th Asilomar Conference on Signals, Systems, and Computers 2026

Site-specific training can improve wireless receiver performance without increasing computational complexity. However, real-world results have so far focused on fully trainable neural receivers and single-layer transmissions. We study site-specific finetuning of three receiver architectures: fully trainable neural, model-driven neural, and model-based. We train and evaluate these receivers using new measurements from a standard-compliant 5G NR testbed at ETH Zurich with dual-layer uplink transmission, including measurement campaigns conducted more than six months apart. Our results show that site-specific finetuning (i) substantially improves fully trainable and model-driven neural receivers, while resulting in only marginal gains for the less tunable model-based receiver; (ii) enables a single neural receiver jointly finetuned for single- and dual-layer transmission to closely match receivers finetuned separately for each configuration; and (iii) remains effective across measurement campaigns separated by more than six months. We also investigate site-specific linear minimum mean-square error channel estimation using covariance matrices estimated from either synthetic channels or site-specific measurements. When combined with iterative detection and decoding, site-specific channel estimation achieves the lowest error rate observed in our datasets. Our finetuning code and measurement datasets are publicly available at https://github.com/IIP-Group/site_specific_training

0.48

Performance Analysis of Quantization-Aware Neural Channel Estimation with Low-Precision Inference

eess.SP ·2026-11-10 ·Joonas Törmälä, SaiKrishna Saketh Yellapragada, Eeli Susan, Esa Ollila
similarity 0.66
Abstract · Submitted to IEEE Wireless Communications and Networking Conference (WCNC) 2027

Neural channel estimators can improve radio performance of 5G receivers, but real-time deployment in the radio access network (RAN) imposes strict latency and power budgets. Prior studies of quantized neural channel estimators assess this cost through mean-squared error or analytic operation counts. In this paper, we train a 1D convolutional neural network (CNN) channel estimator for the 5G NR physical uplink shared channel (PUSCH) with INT8 and FP8 quantization-aware training (QAT), and we evaluate its radio performance together with its latency, power, and energy on an NVIDIA H100 GPU. On TDL-A and TDL-C channels at user equipment (UE) speeds up to 35 m/s, both 8-bit models stay within 0.025 dB of FP32 at 10% block error rate (BLER). At batch size 128, INT8 reduces the latency by 16%, the incremental GPU power by 33%, and the energy per query by 26%, compared with 6%, 26%, and 21% for FP8. INT8 is therefore the preferred format.

0.39

HELENA for 5G NR LEO NTN Channel Estimation: A Comparative Evaluation

eess.SP cs.LGcs.NIcs.PF ·2026-09-13 ·Miguel Camelo Botero, Nina Slamnik-Kriještorac, Johann Marquez-Barja
similarity 0.63
Abstract

Deep Learning (DL)-based channel estimation has shown high accuracy and low latency in terrestrial 5G NR, but Low Earth Orbit (LEO) Non-Terrestrial Networks (NTNs) introduce Doppler and synchronization impairments that may require NTN-specific architectures. We test whether High-Efficiency Learning-based channel Estimation using dual Neural Attention (HELENA), originally designed for terrestrial channels, remains effective after NTN retraining and suitable across high-performance and power-constrained inference platforms. Its unchanged architecture is trained on paired receiver-compensated (NTN-1) and residual-impaired (NTN-2) datasets and compared with eight terrestrial-origin models trained on the same NTN data and the NTN-specific MDELAN-SISO. HELENA achieves the lowest observed SNR-averaged NMSE among the DL estimators in both conditions, including 55.8-62.7% lower linear-scale NMSE than MDELAN-SISO. All DL models degrade in NTN-2, demonstrating the challenge posed by residual Doppler and its associated impairments. On an RTX PRO 4500, HELENA achieves 0.0595 ms 99th-percentile (P99) inference latency, 88.1% below the 0.5 ms budget, with lower energy than its closest attention-based competitors. On a 10 W Jetson Orin NX, it retains a favorable accuracy-energy trade-off, but no model meets the P99 budget. Thus, HELENA needs no NTN-specific redesign for the evaluated task, while embedded tail latency remains an open challenge.

0.16

Neural Multipath Fields for 6G FR3 Digital Twins: Latent Adaptation from Sparse Data

eess.SP ·2026-11-09 ·Srijita Sanyal, Adam Umra, Aydin Sezgin
similarity 0.61
Abstract

Wireless digital twins are essential for environment-aware 6G communications, motivating the investigation of frequency range 3 (FR3), an emerging mid-band regime offering a promising balance between bandwidth and propagation characteristics. Neural Radio Frequency (RF) fields provide continuous surrogates for site-specific radio propagation, but adapting a scene-specific field to a new environment can require substantial measurements and retraining. To this end, we propose the Latent-Adaptive Neural Multipath Field (LANMF), a scene-conditioned FR3 model that predicts path-resolved delays, complex channel impulse response (CIR) coefficients, and arrival and departure directions from transmitter-receiver coordinates. LANMF learns shared propagation representations across source environments and adapts to unseen scenes by optimizing only a 16-dimensional scene latent. Evaluated on six ray-traced indoor scenes at 7.5 GHz, latent-only adaptation yields improvements in prediction with just 5-10 target links (0.42-0.83% of available links). Compared with full-network fine-tuning, it updates only 16 persistent target parameters, reducing adaptation time by 28-30% and incremental peak GPU memory by 82-85%. While the proposed solution supports various wireless applications, we demonstrate its utility through beam-candidate reduction using a 64-beam codebook, retaining measurement-based final beam selection.

0.34

MIRAGE: A GPU-Accelerated IQ-Level Channel Emulator for Real-Time Wireless Digital Twins

cs.NI eess.SP ·2026-10-28 ·Ali Saeizadeh, Angelo Feraudo, Avaneeth Anil, Leonardo Bonati, Pedram Johari +1 more
similarity 0.61
Abstract · 14 pages, 12 figures, 3 tables

Wireless digital twins enable network policies to be evaluated before deployment, but reproducing channel effects within a running protocol stack requires continuous waveform processing under strict timing constraints. We present MIRAGE, a GPU-accelerated channel emulator that applies propagation effects directly to in-phase and quadrature samples exchanged by software 5G New Radio stacks. MIRAGE combines batched multiuser, multiantenna filtering with timestamped shared-memory transport and radio-driver integrations for OpenAirInterface and OCUDU. External propagation models supply channel responses asynchronously, while versioned buffers ensure consistent coefficients within each processing interval. Experiments on one NVIDIA H100 GPU evaluate waveform accuracy, processing time, channel updates, and full-stack traffic delivery. At 61.44 million samples per second, eight single-antenna links, four two-by-two links, and one four-by-four link meet the tested 0.5 ms bidirectional processing criterion. Waveform errors remain within one integer quantization step per component, with no mixed coefficient versions across 16.7 million analyzed slots. Integration with the X5G testbed enables slice resource allocations to be evaluated before deployment. Both evaluated slices ultimately satisfy their throughput caps, requiring one physical reconfiguration under line-of-sight conditions and four under non-line-of-sight conditions. These results demonstrate full-stack policy evaluation and expose prediction errors affecting transfer to a physical network.

0.37

ANNA: Attention-Free Neural Neighborhood Aggregation for Channel Estimation on Regenerative NTN Payloads

eess.SP ·2026-11-15 ·Miguel Camelo Botero, Nina Slamnik-Kriještorac, Johann Marquez-Barja
benchmarkhot direction similarity 0.60
Abstract

Accurate deep learning (DL)-based channel estimation (CE) for non-terrestrial network (NTN) uplinks must meet the processing, power, and latency constraints of regenerative payloads. We propose Attention-free Neural Neighborhood Aggregation (ANNA), a lightweight architecture combining per-resource block (RB) pilot projection, convolutional neighborhood aggregation, and shared reconstruction, with dense-grid expansion only at the output. Evaluation against learned and classical estimators uses paired waveform-generated datasets with receiver frequency correction enabled and disabled. With correction enabled, 16-bit floating point (FP16) deployment on a 10 W Jetson Orin NX achieves 0.372 ms 99th-percentile (P99) latency and 2.15 dB lower mean normalized mean-squared error (NMSE) than the fastest learned baseline at 29.6% higher latency. Relative to the most accurate learned baseline, ANNA is 4.08 times as fast and consumes 80.5% less module energy per sample, with a 1.14 dB accuracy penalty. It meets the adopted 0.5 ms P99 target in all 100 benchmark runs, demonstrating a favorable accuracy-latency-energy trade-off for embedded uplink CE.

0.32

DeepRT-Cal: Learning to Calibrate Ray-Traced Twin Channel Statistics with Low-Fidelity Environmental Geometry

eess.SP ·2026-11-06 ·Shaoyi Liu, Jianhua Zhang, Li Yu, Yichen Cai, Tao Wu +3 more
similarity 0.59
Abstract · 15 pages, 14 figures, 3 tables

Sixth-generation (6G) wireless systems increasingly rely on digital twin channels (DTCs) to represent and interact with physical radio environments. Ray tracing (RT) is naturally suited to DTC construction because it provides deterministic and physically interpretable channel predictions. However, high-fidelity three-dimensional environment models are expensive to obtain, whereas geometric inaccuracies in low-fidelity models can alter the detected multipath components (MPCs) and consequently distort received-power and delay-domain twin channel statistics. Building on the DeepRT ray-tracing framework, this paper proposes DeepRT-Cal, a geometry-aware cross-fidelity calibration framework that predicts high-fidelity twin channel statistics from low-fidelity geometry and RT features.The network encodes global link descriptors, masked low-fidelity MPC tokens, propagation-corridor geometry, and link-centered environmental objects. During training, detailed geometry is introduced as privileged information with structured masking, while deployment requires only low-fidelity geometry and low-fidelity RT information. A link-conditioned cross-attention module retrieves the environmental context relevant to each Tx--Rx link. The prediction heads estimate high-fidelity twin channel statistics, including total received power, RMS delay spread, mean excess delay, and a normalized power-weighted power-delay profile (PDP). Outdoor evaluation shows that, in an non-line of sight (NLoS) region, the method reduces power MAE from 16.80 to 3.88 dB and RMS delay-spread MAE from 304.89 to 98.19 ns. In a LoS-dominated region, power prediction improves, while RMS delay-spread accuracy remains comparable to direct RT.

0.28

Digital Twin Enhanced Channel Twin for AI-Native CSI Inference: Generalizability and Scalability

eess.SP ·2026-09-22 ·Majumder Haider, Imtiaz Ahmed, Zoheb Hassan, Danda B. Rawat, Huaiyu Dai
similarity 0.59
Abstract

Accurate channel state information (CSI) is critical for advanced multi-antenna wireless networks. While high-fidelity and site-specific ray-tracing (RT) equipped wireless digital twins can overcome overhead for CSI acquisition. However, computing deterministic, calibrated RT based CSI from a wireless digital twin for every orthogonal frequency-division multiplexing (OFDM) symbol violates the strict microsecond latency budgets of the 5G NR numerology. To overcome this computational bottleneck, this paper investigates three approaches within a calibrated 3D digital twin framework, namely (i) the generalization of the channel twin, (ii) the performance enhancement using a neural receiver, and (iii) a data-driven interpolation framework for scalability. We compute high-precision CSI for a sparse subset of temporal anchors and employ an attention-based Transformer to predict the remaining symbols. Unlike polynomial splines or sequential long short-term memory (LSTM) networks, the Transformer exploits a global receptive field to capture the non-linear multipath dynamics while enabling parallelizable, real-time inference. To achieve spatial scalability, we introduce channel twin generalization. By fine-tuning the 3D RT models alongside the Transformer, the framework leverages the CSI dataset of one location to infer the channel behavior of an unseen environment. Transfer learning further adapts the model to a new environment using only a small fraction of locally collected data. Simulation results demonstrate that the proposed architecture substantially outperforms the baseline interpolators, achieves robust spatial transferability, and lowers the bit error rate through the unified neural receiver. These results establish a scalable, environment-agnostic foundation of distributed channel twins for high-quality, low-overhead CSI acquisition in next-generation cellular networks.

0.25