CS Paper Radar

Performance Analysis of Quantization-Aware Neural Channel Estimation with Low-Precision Inference

Joonas Törmälä, SaiKrishna Saketh Yellapragada, Eeli Susan, Esa Ollila

eess.SP ·submitted 2026-11-10 21:32 UTC · v1

Abstract

Neural channel estimators can improve radio performance of 5G receivers, but real-time deployment in the radio access network (RAN) imposes strict latency and power budgets. Prior studies of quantized neural channel estimators assess this cost through mean-squared error or analytic operation counts. In this paper, we train a 1D convolutional neural network (CNN) channel estimator for the 5G NR physical uplink shared channel (PUSCH) with INT8 and FP8 quantization-aware training (QAT), and we evaluate its radio performance together with its latency, power, and energy on an NVIDIA H100 GPU. On TDL-A and TDL-C channels at user equipment (UE) speeds up to 35 m/s, both 8-bit models stay within 0.025 dB of FP32 at 10% block error rate (BLER). At batch size 128, INT8 reduces the latency by 16%, the incremental GPU power by 33%, and the energy per query by 26%, compared with 6%, 26%, and 21% for FP8. INT8 is therefore the preferred format.

Comment
Submitted to IEEE Wireless Communications and Networking Conference (WCNC) 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Hardware-in-the-Loop Phase-Aware CNN for Real-Time 5G Channel Estimation

eess.SP cs.CVcs.ITcs.LG ·2026-08-11 ·Javad Zolfaghari-Bengar, Rakibul Rony, Elisa Gomez-de-Lope, Alejandro Villena-Rodriguez, Abhinav Mahadevan +1 more
published similarity 0.73
Abstract · This demo paper has been accepted at IEEE CSCN 2026

This demo presents real-time AI-based uplink channel-estimation inference using data collected from a hardware-in-the-loop 5G platform. The data-collection setup integrates commercial RF signal generation, programmable channel emulation, an O-RAN Radio Unit, DU emulation, and a lightweight phase-aware convolutional neural network (CNN) that estimates the channel response directly from received DMRS signals. Unlike simulation-only evaluations, the hardware-derived dataset exposes the estimator to practical RF and system-level impairments, including calibration mismatches, synchronization imperfections, quantization effects, phase noise, and implementation-specific nonlinearities. During the demo, attendees will observe real-time CNN inference and channel reconstruction using captured hardware-generated DMRS observations and compare the proposed CNN against Least Squares (LS) and frequency-domain LMMSE baselines. The objective is to showcase a practical AI-native physical-layer inference pipeline that combines hardware-derived 5G data with real-time neural channel estimation for future 5G-Advanced and 6G systems.

0.19

Design and Over-the-Air Evaluation of a Digital Twin-Driven Site-Specific Neural Receiver for 5G NR on NVIDIA DGX Spark

eess.SP ·2026-11-10 ·Qiuyuan Chen, Chengyang Yao, Liuchang Zhuo, Yuquan Sun, Cunhua Pan +2 more
hot direction similarity 0.66
Abstract

We design and evaluate a site-specific neural receiver for the 5G New Radio (NR) uplink. A corridor digital twin built from a radar scan and refined manually provides 28,671 ray-traced channel records for training an eight-round convolutional graph neural network with pilot-aware inputs and auxiliary channel supervision. The GPU on NVIDIA DGX Spark evaluates time--frequency convolutions in parallel across the received grid to accelerate inference. The receiver uses the standard NR uplink waveform and reference signals and feeds soft bits to the existing transport-block decoder. In over-the-air tests with NI USRP B210 radios under common radio settings, the site-trained receiver achieves the highest mean uplink rate at all five positions. At a non-line-of-sight corner, it reaches 16.2 Mb/s, compared with 4.1 Mb/s for the conventional receiver and 2.4 Mb/s for the 3GPP-trained neural receiver. These results demonstrate the feasibility of integrating neural reception into the 5G NR physical layer and show its potential for AI-RAN deployments.

0.27

16-bit Precision of Convolutional Neural Networks on Microcontroller Units for 8-bit Costs

cs.LG ·2026-10-02 ·Rui Liu, Benjamin Paaßen
similarity 0.63
Abstract

To deploy deep neural networks on edge hardware, highly efficient inference schemes are necessary that retain high accuracy. This work presents W16A16, a high precision (16-bit), fast speed, low energy quantization method. On a widely applied microcontroller architecture Armv7E-M, our proposed approach achieves faster speed and lower energy consumption on layer- and model-level compared to alternative quantization schemes. We analyze the architecture of Armv7E-M, explain the underlying principles behind the performance advantages of 16-bit approaches, and evaluate the empiric quantization errors for regression and classification tasks, as well as empiric time- and energy consumption in MCU deployment. We observe ca.\ 10 times lower quantization errors compared to 8-bit quantization schemes while achieving similar or better inference times and energy consumption.

0.09

Floating-Point Microformat Quantization and Pruning for Efficient MU-MIMO Neural Receivers

eess.SP ·2026-09-25 ·SaiKrishna Saketh Yellapragada, Esa Ollila, Mário Costa, Yawei Li
similarity 0.62
Abstract · This work has been submitted to the 2027 IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP 2027)

Neural receivers outperform conventional 5G NR processing chains, but their compute and memory demands hinder real-time deployment. For a standard-compliant multi-user MIMO neural receiver, the 4-bit number format, not merely the bit width, determines whether compression preserves the gain over classical receivers. We apply weight and activation quantization-aware training (QAT) and, separately, 50% magnitude pruning, comparing INT8/INT4 and FP8 (E4M3)/FP4 (E2M1) weights with INT8 post-ReLU activations. Trained on 3GPP UMi channels and evaluated on TDL-B and TDL-C, 8-bit weight-activation models remain within 0.05 dB of FP32 at 10% and 1% block error rate (BLER). At 4 bits, uniform INT4 loses 3.3-3.7 dB and falls below LS-LMMSE, whereas FP4 more than halves this loss (1.3-1.4 dB) and still outperforms it by about 0.5 dB, even after pruning. FP4's denser near-zero grid matches the trained weight distribution, and FP4 avoids the residual-path over-pruning seen with INT4. An analytic cost model projects 66x fewer bit-operations and 8.8x less weight storage for pruned 4-bit-weight inference.

0.27

ANNA: Attention-Free Neural Neighborhood Aggregation for Channel Estimation on Regenerative NTN Payloads

eess.SP ·2026-11-15 ·Miguel Camelo Botero, Nina Slamnik-Kriještorac, Johann Marquez-Barja
benchmarkhot direction similarity 0.61
Abstract

Accurate deep learning (DL)-based channel estimation (CE) for non-terrestrial network (NTN) uplinks must meet the processing, power, and latency constraints of regenerative payloads. We propose Attention-free Neural Neighborhood Aggregation (ANNA), a lightweight architecture combining per-resource block (RB) pilot projection, convolutional neighborhood aggregation, and shared reconstruction, with dense-grid expansion only at the output. Evaluation against learned and classical estimators uses paired waveform-generated datasets with receiver frequency correction enabled and disabled. With correction enabled, 16-bit floating point (FP16) deployment on a 10 W Jetson Orin NX achieves 0.372 ms 99th-percentile (P99) latency and 2.15 dB lower mean normalized mean-squared error (NMSE) than the fastest learned baseline at 29.6% higher latency. Relative to the most accurate learned baseline, ANNA is 4.08 times as fast and consumes 80.5% less module energy per sample, with a 1.14 dB accuracy penalty. It meets the adopted 0.5 ms P99 target in all 100 benchmark runs, demonstrating a favorable accuracy-latency-energy trade-off for embedded uplink CE.

0.25

MIRAGE: A GPU-Accelerated IQ-Level Channel Emulator for Real-Time Wireless Digital Twins

cs.NI eess.SP ·2026-10-28 ·Ali Saeizadeh, Angelo Feraudo, Avaneeth Anil, Leonardo Bonati, Pedram Johari +1 more
similarity 0.61
Abstract · 14 pages, 12 figures, 3 tables

Wireless digital twins enable network policies to be evaluated before deployment, but reproducing channel effects within a running protocol stack requires continuous waveform processing under strict timing constraints. We present MIRAGE, a GPU-accelerated channel emulator that applies propagation effects directly to in-phase and quadrature samples exchanged by software 5G New Radio stacks. MIRAGE combines batched multiuser, multiantenna filtering with timestamped shared-memory transport and radio-driver integrations for OpenAirInterface and OCUDU. External propagation models supply channel responses asynchronously, while versioned buffers ensure consistent coefficients within each processing interval. Experiments on one NVIDIA H100 GPU evaluate waveform accuracy, processing time, channel updates, and full-stack traffic delivery. At 61.44 million samples per second, eight single-antenna links, four two-by-two links, and one four-by-four link meet the tested 0.5 ms bidirectional processing criterion. Waveform errors remain within one integer quantization step per component, with no mixed coefficient versions across 16.7 million analyzed slots. Integration with the X5G testbed enables slice resource allocations to be evaluated before deployment. Both evaluated slices ultimately satisfy their throughput caps, requiring one physical reconfiguration under line-of-sight conditions and four under non-line-of-sight conditions. These results demonstrate full-stack policy evaluation and expose prediction errors affecting transfer to a physical network.

0.37

StreamingDPD: A 1.28-GSa/s Instantaneous-Power-Gated Depthwise TCN Accelerator for Real-Time 320-MHz Digital Predistortion

eess.SP cs.AR ·2026-11-17 ·Yizhuo Wu, Xinling Wang, Chang Gao
similarity 0.61
Abstract

State feedback between successive samples limits the streaming throughput of recurrent neural networks for digital predistortion (DPD). We present StreamingDPD, an accelerator that processes 320-MHz signals at 1.28 GSa/s. Its 207-parameter instantaneous-power-gated depthwise temporal convolutional network (IPG-DWTCN) uses $|x[n]|^2$ to gate feature channels and causal dilated depthwise convolutions to model power amplifier memory. The network maps to a spatially unrolled fixed-point pipeline with shift-based quadratic activations and layer-wise mixed precision, sustaining one complex sample per cycle per lane. Its algorithmic cost is 554 floating-point operations per complex sample, 30.1% fewer than the recurrent baseline with the best linearization performance. In RF playback measurements on three power amplifiers driven by 40- to 320-MHz Wi-Fi 6/7 and 5G NR waveforms, IPG-DWTCN achieves the lowest mean adjacent-channel power ratio (ACPR) and ranks first or ties for first in mean error vector magnitude (EVM) against five neural baselines of comparable size. Four-lane FPGA hardware-in-the-loop tests on a 320-MHz 4096-QAM Wi-Fi 7 waveform achieve -45.82 dBc ACPR and -42.94 dB EVM at 1.28 GSa/s. At the same sample rate, post-layout evaluation of a single-lane 12-nm FinFET ASIC yields a 0.10 mm$^2$ core, a 52-cycle (40.63 ns) latency, and an estimated typical-corner power of 142.21 mW (111.10 pJ/sample). Relative to the prior 22-nm recurrent DPD ASIC, the design provides 5.1 times the throughput at about one-seventh the energy per sample.

0.25

On the Impact of Site-Specific Training for a Real-World 5G NR System

cs.IT eess.SP ·2026-09-03 ·Reinhard Wiesmayr, Nuri Berke Baytekin, Chris Dick, Christoph Studer
publishedcode/data similarity 0.61
Abstract · This work has been accepted for presentation at the 60th Asilomar Conference on Signals, Systems, and Computers 2026

Site-specific training can improve wireless receiver performance without increasing computational complexity. However, real-world results have so far focused on fully trainable neural receivers and single-layer transmissions. We study site-specific finetuning of three receiver architectures: fully trainable neural, model-driven neural, and model-based. We train and evaluate these receivers using new measurements from a standard-compliant 5G NR testbed at ETH Zurich with dual-layer uplink transmission, including measurement campaigns conducted more than six months apart. Our results show that site-specific finetuning (i) substantially improves fully trainable and model-driven neural receivers, while resulting in only marginal gains for the less tunable model-based receiver; (ii) enables a single neural receiver jointly finetuned for single- and dual-layer transmission to closely match receivers finetuned separately for each configuration; and (iii) remains effective across measurement campaigns separated by more than six months. We also investigate site-specific linear minimum mean-square error channel estimation using covariance matrices estimated from either synthetic channels or site-specific measurements. When combined with iterative detection and decoding, site-specific channel estimation achieves the lowest error rate observed in our datasets. Our finetuning code and measurement datasets are publicly available at https://github.com/IIP-Group/site_specific_training

0.48