CS Paper Radar

StreamingDPD: A 1.28-GSa/s Instantaneous-Power-Gated Depthwise TCN Accelerator for Real-Time 320-MHz Digital Predistortion

Yizhuo Wu, Xinling Wang, Chang Gao

eess.SP cs.AR ·submitted 2026-11-17 17:23 UTC · v1

Abstract

State feedback between successive samples limits the streaming throughput of recurrent neural networks for digital predistortion (DPD). We present StreamingDPD, an accelerator that processes 320-MHz signals at 1.28 GSa/s. Its 207-parameter instantaneous-power-gated depthwise temporal convolutional network (IPG-DWTCN) uses $|x[n]|^2$ to gate feature channels and causal dilated depthwise convolutions to model power amplifier memory. The network maps to a spatially unrolled fixed-point pipeline with shift-based quadratic activations and layer-wise mixed precision, sustaining one complex sample per cycle per lane. Its algorithmic cost is 554 floating-point operations per complex sample, 30.1% fewer than the recurrent baseline with the best linearization performance. In RF playback measurements on three power amplifiers driven by 40- to 320-MHz Wi-Fi 6/7 and 5G NR waveforms, IPG-DWTCN achieves the lowest mean adjacent-channel power ratio (ACPR) and ranks first or ties for first in mean error vector magnitude (EVM) against five neural baselines of comparable size. Four-lane FPGA hardware-in-the-loop tests on a 320-MHz 4096-QAM Wi-Fi 7 waveform achieve -45.82 dBc ACPR and -42.94 dB EVM at 1.28 GSa/s. At the same sample rate, post-layout evaluation of a single-lane 12-nm FinFET ASIC yields a 0.10 mm$^2$ core, a 52-cycle (40.63 ns) latency, and an estimated typical-corner power of 142.21 mW (111.10 pJ/sample). Relative to the prior 22-nm recurrent DPD ASIC, the design provides 5.1 times the throughput at about one-seventh the energy per sample.

Closest papers

Nearest neighbours by meaning across the whole index.

Hardware-in-the-Loop Phase-Aware CNN for Real-Time 5G Channel Estimation

eess.SP cs.CVcs.ITcs.LG ·2026-08-11 ·Javad Zolfaghari-Bengar, Rakibul Rony, Elisa Gomez-de-Lope, Alejandro Villena-Rodriguez, Abhinav Mahadevan +1 more
published similarity 0.66
Abstract · This demo paper has been accepted at IEEE CSCN 2026

This demo presents real-time AI-based uplink channel-estimation inference using data collected from a hardware-in-the-loop 5G platform. The data-collection setup integrates commercial RF signal generation, programmable channel emulation, an O-RAN Radio Unit, DU emulation, and a lightweight phase-aware convolutional neural network (CNN) that estimates the channel response directly from received DMRS signals. Unlike simulation-only evaluations, the hardware-derived dataset exposes the estimator to practical RF and system-level impairments, including calibration mismatches, synchronization imperfections, quantization effects, phase noise, and implementation-specific nonlinearities. During the demo, attendees will observe real-time CNN inference and channel reconstruction using captured hardware-generated DMRS observations and compare the proposed CNN against Least Squares (LS) and frequency-domain LMMSE baselines. The objective is to showcase a practical AI-native physical-layer inference pipeline that combines hardware-derived 5G data with real-time neural channel estimation for future 5G-Advanced and 6G systems.

0.19

Performance Analysis of Quantization-Aware Neural Channel Estimation with Low-Precision Inference

eess.SP ·2026-11-10 ·Joonas Törmälä, SaiKrishna Saketh Yellapragada, Eeli Susan, Esa Ollila
similarity 0.61
Abstract · Submitted to IEEE Wireless Communications and Networking Conference (WCNC) 2027

Neural channel estimators can improve radio performance of 5G receivers, but real-time deployment in the radio access network (RAN) imposes strict latency and power budgets. Prior studies of quantized neural channel estimators assess this cost through mean-squared error or analytic operation counts. In this paper, we train a 1D convolutional neural network (CNN) channel estimator for the 5G NR physical uplink shared channel (PUSCH) with INT8 and FP8 quantization-aware training (QAT), and we evaluate its radio performance together with its latency, power, and energy on an NVIDIA H100 GPU. On TDL-A and TDL-C channels at user equipment (UE) speeds up to 35 m/s, both 8-bit models stay within 0.025 dB of FP32 at 10% block error rate (BLER). At batch size 128, INT8 reduces the latency by 16%, the incremental GPU power by 33%, and the energy per query by 26%, compared with 6%, 26%, and 21% for FP8. INT8 is therefore the preferred format.

0.30

Energy-Oriented CGLA Mapping of a Memory-Polynomial Digital Predistortion Kernel

cs.AR ·2026-09-23 ·Takuto Ando, Yasuhiko Nakashima
published similarity 0.60
Abstract · Accepted for presentation at the 2026 IEEE Asia Pacific Conference on Circuits and Systems (APCCAS 2026)

Memory-polynomial digital predistortion (DPD) evaluates a small fixed coefficient set over a sliding input history, so its reduction step is a complex-MAC workload with local reuse. We map this DPD reduction kernel onto In-Memory Accelerator eXtension (IMAX), a programmable CPU-Grounded Linear Array (CGLA) composed of a one-dimensional processing-element/local-memory pipeline. For a (P,M)=(5,5) odd-order memory-polynomial instance, the mapping keeps the 120 B coefficient set in local memory, advances the five-tap history over 1024-sample tiles, and realizes the 15 order-delay terms as a 33-stage streaming complex-MAC reduction. The evaluation measures kernel latency and modeled energy. All measured paths use the same single-precision complex workload of 32 sequences, each with 2048 complex samples, across an IMAX FPGA prototype, a CUDA implementation on an RTX 4090 system, and an ARM-NEON implementation on Jetson AGX Orin. With this 1024-sample tile configuration, the IMAX FPGA prototype reports 20.201 ms end-to-end latency and 1.948 ms kernel-only latency. Using the previously reported 28 nm IMAX frequency and power model, the projected IMAX configuration gives 3.14 ms end-to-end latency and 0.34 ms kernel-only latency. The RTX 4090 baseline has the lowest end-to-end latency at 0.484 ms. Under model-based platform power accounting and the stated power assumptions, the projected IMAX configuration gives 169.1 times smaller modeled end-to-end energy per batch than the RTX 4090 baseline. This value uses platform power assumptions rather than workload-dependent runtime power or a direct silicon power measurement. A controlled synthetic PA-model validation checks that the same 15-term form improves test-set NMSE by 26.1 dB and ACLR by 26.0 dB. These results characterize the mapped memory-polynomial DPD reduction on IMAX for the evaluated tile configuration and power model.

0.39

Communication-Efficient LLM Adaptation over Decentralized GPU Meshes

cs.LG ·2026-09-13 ·Sameera Ramasinghe, Shamane Siriwardhana, Thalaiyasingam Ajanthan, Hadi Mohaghegh Dolatabadi, Chamin P Hewa Koneputugodage +6 more
similarity 0.60
Abstract · 38 pages, 2 figures, 12 tables

Decentralized training enables large-model training over low-end GPUs and internet-grade connections, but communication along both data-parallel and pipeline-parallel axes becomes the primary bottleneck. We study post-pretraining adaptation in this setting. We propose an asynchronous two-circuit system: a fast compressed training circuit drives throughput using activation masking for pipeline-parallel (PP) transfer and compressed data-parallel (DP) synchronization, while a slow anchor circuit runs occasional unmasked forward--backward passes off the critical path. Then, we introduce a spectral correction optimizer that uses these delayed anchor priors to denoise masked gradients without blocking the fast stream. Although prior work has found aggressive activation compression unreliable, we show that masking supports post-pretraining adaptation at high compression rates when anchored this way. Pipeline-parallel compression alone yields up to a $9\times$ throughput gain, and combining it with data-parallel compression increases beyond $40\times$ over internet-grade $\sim 200$Mbps connections, while matching dense uncompressed performance across domain adaptation and continual pretraining.

0.23

Sub-100KB On-Device CNN Training via Dynamic Sparse Updates and Hardware--Software Co-Design

cs.AR ·2026-11-11 ·I-Hsuan Li, Tian-Sheuan Chang
top venue similarity 0.58
Abstract · published in AICAS 2026

The increasing demand for real-time processing and personalized deep learning has made edge-device training essential but challenging due to high memory and computational costs. To address this, we propose a Convolutional Neural Network (CNN) training accelerator with a dynamic sparse update mechanism that selectively updates important parameters using a random channel strategy, avoiding costly evaluations. Combined with activation pruning, our approach reduces activation storage to just 3.4\% of the original. Our hardware features a fused forward dataflow that concurrently processes group normalization and convolution, reducing training time by 45\% through computation reordering and efficient zero-skipping. Implemented in TSMC 28nm at FP8 precision, the design operates at 800 MHz, achieving 8 TOPS peak throughput, 31.13 TOPS/W energy efficiency, and 14.8 TOPS/mm$^2$ area efficiency, with power consumption ranging from 257 to 272 mW. The design enables on-device training within a sub-100KB on-chip SRAM budget (95KB in silicon).

0.36

Realizing Low-Precision Storage and Sparse Execution in a Folded FPGA Speech Enhancer

eess.AS cs.ARcs.LG ·2026-10-26 ·Clément Laroche
similarity 0.58
Abstract · 5 pages, 3 figures, 2 tables. Submitted to IEEE ISCAS 2027

Hardware-aware training often optimizes FPGA resources, latency, or bit operations, but folding changes what compression saves: shared arithmetic decouples precision, weight storage, and scheduled work. We derive training objectives from the measured costs of a folded streaming speech-enhancement accelerator. Mixed-precision weights reduce on-chip storage; structured channel sparsity removes entire operations from the engine schedule. We deploy a bit-exact implementation on the Kria KV260. The best sparse model eliminates 47.3% of convolution MACs, cutting frame time by 45% (1.86 to 1.03 ms) and dynamic energy by 60% (83 to 33 $μ$J/frame) against a storage-priced model measured in the same session, with higher speech quality. Relative to the most efficient dense build measured separately, frame time falls by 42% and energy by 48%. Reducing weight width from 8 to 6 bits lowers dynamic power by 27% but changes frame time by less than 5%. Plain channel group-lasso removes more work than cycle-cost-weighted lasso. Thus, folded-accelerator training should price storage and removable work separately, rather than rely on a single bit-operation metric.

0.32

SCALE-X: A Systematic Complexity-Aware Low-Precision Approach for Digital Predistortion

eess.SP ·2026-09-08 ·Anees Rehman, Mohd Tasleem Khan, George Goussetis, Yuan Ding, Jaiyu Hou +1 more
similarity 0.58
Abstract

This letter presents SCALE-X, a systematic, complexity-aware, low-precision, model-based digital predistortion (DPD) technique for power amplifiers with enhanced capabilities. The proposed approach employs a novel complexity-aware coefficient pruning method, which, when combined with optimized fixed-point modeling, enables more accurate capture of quantization effects and supports better informed decisions for implementation. Targeted configuration of model order, memory depth, and coefficient bitwidth delivers dramatic cuts in computational overhead without much sacrificing accuracy. Field-programmable gate array implementation demonstrates practical trade-offs with improved overall efficiency.

0.25

ANNA: Attention-Free Neural Neighborhood Aggregation for Channel Estimation on Regenerative NTN Payloads

eess.SP ·2026-11-15 ·Miguel Camelo Botero, Nina Slamnik-Kriještorac, Johann Marquez-Barja
benchmarkhot direction similarity 0.58
Abstract

Accurate deep learning (DL)-based channel estimation (CE) for non-terrestrial network (NTN) uplinks must meet the processing, power, and latency constraints of regenerative payloads. We propose Attention-free Neural Neighborhood Aggregation (ANNA), a lightweight architecture combining per-resource block (RB) pilot projection, convolutional neighborhood aggregation, and shared reconstruction, with dense-grid expansion only at the output. Evaluation against learned and classical estimators uses paired waveform-generated datasets with receiver frequency correction enabled and disabled. With correction enabled, 16-bit floating point (FP16) deployment on a 10 W Jetson Orin NX achieves 0.372 ms 99th-percentile (P99) latency and 2.15 dB lower mean normalized mean-squared error (NMSE) than the fastest learned baseline at 29.6% higher latency. Relative to the most accurate learned baseline, ANNA is 4.08 times as fast and consumes 80.5% less module energy per sample, with a 1.14 dB accuracy penalty. It meets the adopted 0.5 ms P99 target in all 100 benchmark runs, demonstrating a favorable accuracy-latency-energy trade-off for embedded uplink CE.

0.25