CS Paper Radar

Hardware-in-the-Loop Phase-Aware CNN for Real-Time 5G Channel Estimation

Javad Zolfaghari-Bengar, Rakibul Rony, Elisa Gomez-de-Lope, Alejandro Villena-Rodriguez, Abhinav Mahadevan, Nicolas Kourtellis

eess.SP cs.CVcs.ITcs.LG ·submitted 2026-08-11 10:45 UTC · v1
published

Abstract

This demo presents real-time AI-based uplink channel-estimation inference using data collected from a hardware-in-the-loop 5G platform. The data-collection setup integrates commercial RF signal generation, programmable channel emulation, an O-RAN Radio Unit, DU emulation, and a lightweight phase-aware convolutional neural network (CNN) that estimates the channel response directly from received DMRS signals. Unlike simulation-only evaluations, the hardware-derived dataset exposes the estimator to practical RF and system-level impairments, including calibration mismatches, synchronization imperfections, quantization effects, phase noise, and implementation-specific nonlinearities. During the demo, attendees will observe real-time CNN inference and channel reconstruction using captured hardware-generated DMRS observations and compare the proposed CNN against Least Squares (LS) and frequency-domain LMMSE baselines. The objective is to showcase a practical AI-native physical-layer inference pipeline that combines hardware-derived 5G data with real-time neural channel estimation for future 5G-Advanced and 6G systems.

Comment
This demo paper has been accepted at IEEE CSCN 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Performance Analysis of Quantization-Aware Neural Channel Estimation with Low-Precision Inference

eess.SP ·2026-11-10 ·Joonas Törmälä, SaiKrishna Saketh Yellapragada, Eeli Susan, Esa Ollila
similarity 0.73
Abstract · Submitted to IEEE Wireless Communications and Networking Conference (WCNC) 2027

Neural channel estimators can improve radio performance of 5G receivers, but real-time deployment in the radio access network (RAN) imposes strict latency and power budgets. Prior studies of quantized neural channel estimators assess this cost through mean-squared error or analytic operation counts. In this paper, we train a 1D convolutional neural network (CNN) channel estimator for the 5G NR physical uplink shared channel (PUSCH) with INT8 and FP8 quantization-aware training (QAT), and we evaluate its radio performance together with its latency, power, and energy on an NVIDIA H100 GPU. On TDL-A and TDL-C channels at user equipment (UE) speeds up to 35 m/s, both 8-bit models stay within 0.025 dB of FP32 at 10% block error rate (BLER). At batch size 128, INT8 reduces the latency by 16%, the incremental GPU power by 33%, and the energy per query by 26%, compared with 6%, 26%, and 21% for FP8. INT8 is therefore the preferred format.

0.30

StreamingDPD: A 1.28-GSa/s Instantaneous-Power-Gated Depthwise TCN Accelerator for Real-Time 320-MHz Digital Predistortion

eess.SP cs.AR ·2026-11-17 ·Yizhuo Wu, Xinling Wang, Chang Gao
similarity 0.66
Abstract

State feedback between successive samples limits the streaming throughput of recurrent neural networks for digital predistortion (DPD). We present StreamingDPD, an accelerator that processes 320-MHz signals at 1.28 GSa/s. Its 207-parameter instantaneous-power-gated depthwise temporal convolutional network (IPG-DWTCN) uses $|x[n]|^2$ to gate feature channels and causal dilated depthwise convolutions to model power amplifier memory. The network maps to a spatially unrolled fixed-point pipeline with shift-based quadratic activations and layer-wise mixed precision, sustaining one complex sample per cycle per lane. Its algorithmic cost is 554 floating-point operations per complex sample, 30.1% fewer than the recurrent baseline with the best linearization performance. In RF playback measurements on three power amplifiers driven by 40- to 320-MHz Wi-Fi 6/7 and 5G NR waveforms, IPG-DWTCN achieves the lowest mean adjacent-channel power ratio (ACPR) and ranks first or ties for first in mean error vector magnitude (EVM) against five neural baselines of comparable size. Four-lane FPGA hardware-in-the-loop tests on a 320-MHz 4096-QAM Wi-Fi 7 waveform achieve -45.82 dBc ACPR and -42.94 dB EVM at 1.28 GSa/s. At the same sample rate, post-layout evaluation of a single-lane 12-nm FinFET ASIC yields a 0.10 mm$^2$ core, a 52-cycle (40.63 ns) latency, and an estimated typical-corner power of 142.21 mW (111.10 pJ/sample). Relative to the prior 22-nm recurrent DPD ASIC, the design provides 5.1 times the throughput at about one-seventh the energy per sample.

0.25

On the Impact of Site-Specific Training for a Real-World 5G NR System

cs.IT eess.SP ·2026-09-03 ·Reinhard Wiesmayr, Nuri Berke Baytekin, Chris Dick, Christoph Studer
publishedcode/data similarity 0.66
Abstract · This work has been accepted for presentation at the 60th Asilomar Conference on Signals, Systems, and Computers 2026

Site-specific training can improve wireless receiver performance without increasing computational complexity. However, real-world results have so far focused on fully trainable neural receivers and single-layer transmissions. We study site-specific finetuning of three receiver architectures: fully trainable neural, model-driven neural, and model-based. We train and evaluate these receivers using new measurements from a standard-compliant 5G NR testbed at ETH Zurich with dual-layer uplink transmission, including measurement campaigns conducted more than six months apart. Our results show that site-specific finetuning (i) substantially improves fully trainable and model-driven neural receivers, while resulting in only marginal gains for the less tunable model-based receiver; (ii) enables a single neural receiver jointly finetuned for single- and dual-layer transmission to closely match receivers finetuned separately for each configuration; and (iii) remains effective across measurement campaigns separated by more than six months. We also investigate site-specific linear minimum mean-square error channel estimation using covariance matrices estimated from either synthetic channels or site-specific measurements. When combined with iterative detection and decoding, site-specific channel estimation achieves the lowest error rate observed in our datasets. Our finetuning code and measurement datasets are publicly available at https://github.com/IIP-Group/site_specific_training

0.48

ARIA: An AI-Powered Radio-Channel Inference and Analysis Pipeline

cs.IT eess.SP ·2026-11-09 ·Homa Nikbakht, Mingjun Ying, Dipankar Shakya, Daniel Abraham, Theodore S. Rappaport
similarity 0.64
Abstract · This work has been submitted to the IEEE for possible publication

Statistical channel models play a key role in the design and standardization of next-generation wireless systems. The models substitute for costly and time-consuming field measurements when fitted distributions accurately reproduce the measured channel impulse responses. Future wireless systems will operate in global spectrum allocations from 1 to 150 GHz. Over the full span, analytically chosen distribution families fitted to scarce measurement data fail to deliver the required accuracy. Generative AI models instead learn each distribution from the radio-propagation data itself, adapt to the measured structure at every frequency, and scale across the entire band. We present ARIA, an AI-powered Radio-channel Inference and Analysis pipeline that learns each channel-parameter distribution from the measurements. The pipeline extracts power-delay profiles and recovers the channel parameters with time-cluster spatial-lobe (TCSL) analysis. Three neural density estimators, namely mixture density networks, neural spline flows (NSF), and denoising diffusion implicit models, learn each parameter's distribution. A composite rank across goodness-of-fit metrics with Friedman-Nemenyi testing identifies the best estimator, and a maximum-likelihood step anchored to the measured samples converts its density into closed-form parametric families. We instantiate ARIA on the NYU WIRELESS 16.95 GHz InH campaign and find that NSF outperforms the other estimators on every metric. We also show that a conditional NSF with feature-wise linear modulation, trained jointly on the 6.75 and 16.95 GHz measurements, improves over single-frequency training. We feed the fitted distributions into the NYUSIM simulator and reproduce the measured omnidirectional RMS delay spread medians within 2 ns, the per-lobe azimuth and zenith spread medians within 1 degree, and the omnidirectional zenith spread medians within 0.5 degrees.

0.24

HELENA for 5G NR LEO NTN Channel Estimation: A Comparative Evaluation

eess.SP cs.LGcs.NIcs.PF ·2026-09-13 ·Miguel Camelo Botero, Nina Slamnik-Kriještorac, Johann Marquez-Barja
similarity 0.64
Abstract

Deep Learning (DL)-based channel estimation has shown high accuracy and low latency in terrestrial 5G NR, but Low Earth Orbit (LEO) Non-Terrestrial Networks (NTNs) introduce Doppler and synchronization impairments that may require NTN-specific architectures. We test whether High-Efficiency Learning-based channel Estimation using dual Neural Attention (HELENA), originally designed for terrestrial channels, remains effective after NTN retraining and suitable across high-performance and power-constrained inference platforms. Its unchanged architecture is trained on paired receiver-compensated (NTN-1) and residual-impaired (NTN-2) datasets and compared with eight terrestrial-origin models trained on the same NTN data and the NTN-specific MDELAN-SISO. HELENA achieves the lowest observed SNR-averaged NMSE among the DL estimators in both conditions, including 55.8-62.7% lower linear-scale NMSE than MDELAN-SISO. All DL models degrade in NTN-2, demonstrating the challenge posed by residual Doppler and its associated impairments. On an RTX PRO 4500, HELENA achieves 0.0595 ms 99th-percentile (P99) inference latency, 88.1% below the 0.5 ms budget, with lower energy than its closest attention-based competitors. On a 10 W Jetson Orin NX, it retains a favorable accuracy-energy trade-off, but no model meets the P99 budget. Thus, HELENA needs no NTN-specific redesign for the evaluated task, while embedded tail latency remains an open challenge.

0.16

Radio-Frequency Convolutional Neural Networks

cs.LG cs.ETeess.SPphysics.app-ph ·2026-09-16 ·Zhihui Gao, Shi-Yuan Ma, Yiran Chen, Dirk Englund, Tingjun Chen
similarity 0.64
Abstract · 15 pages, 4 figures. Supplementary Information: 50 pages, 31 figures, 1 table

Running artificial intelligence (AI) models directly on edge devices such as smartphones, wearables, and drones offers low latency, pervasive scalability, and data privacy, but these devices rarely carry the computing capability that modern neural networks demand. Edge accelerators have been developed in response, yet each adds computing hardware to devices already constrained in size, weight, power, and cost (SWaP-C). An alternative lies in what these devices already carry: the frequency mixer in every wireless radio multiplies signals in time, natively performing convolution in the frequency domain. Here we introduce radio-frequency convolutional neural networks (RF-CNNs), which repurpose existing communication hardware for CNN inference. Multi-channel convolutions are mapped onto frequency tones for a passive mixer to execute in a single pass. We experimentally demonstrate that RF-CNN runs deep CNNs up to 26.4 million parameters and nine layers from classification of wireless signals and images to controllable image generation, close to full-precision performance. Because the weights arrive over the air and the analog hardware is shared with communication, the edge device spends energy only on data preparation and readout-down to 0.72 femtojoules per multiply-accumulate, two orders of magnitude less than it would cost on an added digital processor. These results suggest that deployed wireless infrastructure can bring efficient, state-of-the-art AI inference to the billions of devices it already connects.

0.30

ANNA: Attention-Free Neural Neighborhood Aggregation for Channel Estimation on Regenerative NTN Payloads

eess.SP ·2026-11-15 ·Miguel Camelo Botero, Nina Slamnik-Kriještorac, Johann Marquez-Barja
benchmarkhot direction similarity 0.61
Abstract

Accurate deep learning (DL)-based channel estimation (CE) for non-terrestrial network (NTN) uplinks must meet the processing, power, and latency constraints of regenerative payloads. We propose Attention-free Neural Neighborhood Aggregation (ANNA), a lightweight architecture combining per-resource block (RB) pilot projection, convolutional neighborhood aggregation, and shared reconstruction, with dense-grid expansion only at the output. Evaluation against learned and classical estimators uses paired waveform-generated datasets with receiver frequency correction enabled and disabled. With correction enabled, 16-bit floating point (FP16) deployment on a 10 W Jetson Orin NX achieves 0.372 ms 99th-percentile (P99) latency and 2.15 dB lower mean normalized mean-squared error (NMSE) than the fastest learned baseline at 29.6% higher latency. Relative to the most accurate learned baseline, ANNA is 4.08 times as fast and consumes 80.5% less module energy per sample, with a 1.14 dB accuracy penalty. It meets the adopted 0.5 ms P99 target in all 100 benchmark runs, demonstrating a favorable accuracy-latency-energy trade-off for embedded uplink CE.

0.25

Neural Network Verification for Deep Joint Source-Channel Coding

cs.SE cs.AI ·2026-10-08 ·Thanh Le, Hai Duong, Takeshi Matsumura, ThanhVu Nguyen
hot direction similarity 0.61
Abstract

Deep joint source-channel coding (DeepJSCC) transmits data end-to-end over wireless channels using a neural encoder-decoder, but reconstruction quality can degrade sharply under adversarial perturbations and channel disturbances; no method formally bounds this degradation for DeepJSCC. We present the first bound-propagation framework for verifying DeepJSCC's decoder, bounding worst-case reconstruction error over a given wireless channel's noise region. Current deep neural network (DNN) verifiers do not support three DeepJSCC decoder components: parametric rectified linear activations (PReLU), transposed convolutions, and Rayleigh fading. We extend state-of-the-art techniques for optimization of linear relaxation in DNN verification for PReLU, replace the transposed convolution with its restricted upsample-then-convolution form, and formulate Rayleigh fading as a structural perturbation prepended directly into the decoder, thereby reducing the dimensionality of the verification problem. We also instantiate Lipschitz-regularized global robustness training, denoted GloRo, improving global robustness and enabling tight certification of DeepJSCC models for the first time. On DeepJSCC model for image transmission, this global robustness training procedure combined with structural encoding lowers the median certified bound by up to 41% and certifies about ten times more safe cases (192 against 19) than GloRo with interval encoding at a 10-degree error in channel estimation. Over-the-air validation with an orthogonal frequency-division multiplexing (OFDM) implementation on software-defined radio devices confirm the certificate holds on real hardware, with a worst observed error on radio link at 0.082 against a certified bound of 0.128.

0.35