CS Paper Radar

Radio-Frequency Convolutional Neural Networks

Zhihui Gao, Shi-Yuan Ma, Yiran Chen, Dirk Englund, Tingjun Chen

cs.LG cs.ETeess.SPphysics.app-ph ·submitted 2026-09-16 18:00 UTC · v1

Abstract

Running artificial intelligence (AI) models directly on edge devices such as smartphones, wearables, and drones offers low latency, pervasive scalability, and data privacy, but these devices rarely carry the computing capability that modern neural networks demand. Edge accelerators have been developed in response, yet each adds computing hardware to devices already constrained in size, weight, power, and cost (SWaP-C). An alternative lies in what these devices already carry: the frequency mixer in every wireless radio multiplies signals in time, natively performing convolution in the frequency domain. Here we introduce radio-frequency convolutional neural networks (RF-CNNs), which repurpose existing communication hardware for CNN inference. Multi-channel convolutions are mapped onto frequency tones for a passive mixer to execute in a single pass. We experimentally demonstrate that RF-CNN runs deep CNNs up to 26.4 million parameters and nine layers from classification of wireless signals and images to controllable image generation, close to full-precision performance. Because the weights arrive over the air and the analog hardware is shared with communication, the edge device spends energy only on data preparation and readout-down to 0.72 femtojoules per multiply-accumulate, two orders of magnitude less than it would cost on an added digital processor. These results suggest that deployed wireless infrastructure can bring efficient, state-of-the-art AI inference to the billions of devices it already connects.

Comment
15 pages, 4 figures. Supplementary Information: 50 pages, 31 figures, 1 table

Closest papers

Nearest neighbours by meaning across the whole index.

Dataset and Experimental Testbed for Deep Learning-Based Bluetooth Device Fingerprinting

eess.SP cs.CR ·2026-10-30 ·Haytham Albousayri, Bechir Hamdaoui
similarity 0.65
Abstract · 6-page paper; accepted and presented at the Experimental Research on Networking (ERN 2026) workshop, part of 17th International Conference o…

AI-enabled wireless networks have emerged as vital components of future-generation wireless communication systems. Among various wireless architectures, Bluetooth Low Energy (BLE) networks have attracted significant research interest due to their widespread adoption and low cost. In these networks, deep learning (DL) models can be integrated directly into the physical-layer infrastructure to perform diverse tasks, including environment sensing, localization, radio frequency fingerprinting (RFFP), and signal denoising. While highly effective under their original training configurations, these DL models often fail significantly when deployed in unseen environments---such as different rooms, varying temperature conditions, or altered carrier frequencies. Addressing this limitation requires rigorous benchmarking of models and algorithms against unseen configurations to evaluate their generalization and robustness. To bridge this gap, this paper makes two key contributions: i) we introduce a comprehensive, large-scale wireless BLE dataset consisting of raw IQ transmissions from 31 distinct commercial devices captured across diverse days, locations, environments, temperatures, receiver hardware, and frequency channels; ii) we present a case study evaluating state-of-the-art techniques for domain-robust RFFP to advance real-world AI reliability.

0.28

Hardware-in-the-Loop Phase-Aware CNN for Real-Time 5G Channel Estimation

eess.SP cs.CVcs.ITcs.LG ·2026-08-11 ·Javad Zolfaghari-Bengar, Rakibul Rony, Elisa Gomez-de-Lope, Alejandro Villena-Rodriguez, Abhinav Mahadevan +1 more
published similarity 0.64
Abstract · This demo paper has been accepted at IEEE CSCN 2026

This demo presents real-time AI-based uplink channel-estimation inference using data collected from a hardware-in-the-loop 5G platform. The data-collection setup integrates commercial RF signal generation, programmable channel emulation, an O-RAN Radio Unit, DU emulation, and a lightweight phase-aware convolutional neural network (CNN) that estimates the channel response directly from received DMRS signals. Unlike simulation-only evaluations, the hardware-derived dataset exposes the estimator to practical RF and system-level impairments, including calibration mismatches, synchronization imperfections, quantization effects, phase noise, and implementation-specific nonlinearities. During the demo, attendees will observe real-time CNN inference and channel reconstruction using captured hardware-generated DMRS observations and compare the proposed CNN against Least Squares (LS) and frequency-domain LMMSE baselines. The objective is to showcase a practical AI-native physical-layer inference pipeline that combines hardware-derived 5G data with real-time neural channel estimation for future 5G-Advanced and 6G systems.

0.19

Sub-100KB On-Device CNN Training via Dynamic Sparse Updates and Hardware--Software Co-Design

cs.AR ·2026-11-11 ·I-Hsuan Li, Tian-Sheuan Chang
top venue similarity 0.62
Abstract · published in AICAS 2026

The increasing demand for real-time processing and personalized deep learning has made edge-device training essential but challenging due to high memory and computational costs. To address this, we propose a Convolutional Neural Network (CNN) training accelerator with a dynamic sparse update mechanism that selectively updates important parameters using a random channel strategy, avoiding costly evaluations. Combined with activation pruning, our approach reduces activation storage to just 3.4\% of the original. Our hardware features a fused forward dataflow that concurrently processes group normalization and convolution, reducing training time by 45\% through computation reordering and efficient zero-skipping. Implemented in TSMC 28nm at FP8 precision, the design operates at 800 MHz, achieving 8 TOPS peak throughput, 31.13 TOPS/W energy efficiency, and 14.8 TOPS/mm$^2$ area efficiency, with power consumption ranging from 257 to 272 mW. The design enables on-device training within a sub-100KB on-chip SRAM budget (95KB in silicon).

0.32

Joint Optimization of Memory and Computing Frequency for Energy-Efficient DNN Inference

cs.AI ·2026-08-14 ·Yunchu Han, Zhaojun Nan, Sheng Zhou, Zhisheng Niu
published similarity 0.60
Abstract

Deep neural network (DNN) inference on mobile devices often incurs high latency and energy consumption due to limited computing and memory resources. To enable energy-efficient DNN inference, most existing studies focus on dynamic voltage and frequency scaling (DVFS) for adjusting the computing frequency, while the impact of memory frequency on the inference performance has been greatly overlooked. In this paper, we consider the impact of memory frequency and computing frequency on DNN inference time, and jointly optimize these two frequencies together with communication resources for energy-efficient DNN inference. Based on a realistic inference time model, we formulate an optimization problem to minimize the energy consumption of all mobile devices under the deadline constraint. For local inference, we derive a near-optimal closed-form solution via convex optimization, while an optimal closed-form solution for transmission power is obtained for edge inference with the given bandwidth. Furthermore, we propose a low-complexity heuristic algorithm to effectively solve the overall problem with polynomial time complexity. Simulation results based on measured data show that the proposed near-optimal solution for local inference can achieve optimal performance under strict deadline constraints, with a performance gap of up to 2.5% compared with the optimal solution. Meanwhile, our proposed algorithm significantly reduces the energy consumption of devices by up to 10.4% compared to other methods.

0.17

Frequency Selective Neural Networks as a Foundation Architecture for Time Series Learning

cs.AI ·2026-08-29 ·Hui Huang, Ye Sun, Shiyan Hu
benchmarkcode/data similarity 0.60
Abstract

Time-series data across physical and biological domains are fundamentally driven by complex, non-stationary oscillatory modes. While deep learning models, such as Convolutional Neural Networks (CNNs), Recurrent Neural Networks, and Transformers, have dominated sequential analysis, they remain fundamentally "spectral-blind". By mapping continuous physical waves into unconstrained spatial or discrete token spaces, these architectures suffer from severe spectral entanglement, acting as opaque black boxes that decouple predictive accuracy from physical reality. In this paper, we introduce the Frequency Selective Neural Network (FSNN), pioneering a foundation architecture guaranteeing physical interpretability without sacrificing expressive power of deep learning. FSNN addresses spectral entanglement by explicitly embedding the rigorous mathematics of advanced signal processing into its neural topology. Through a fully differentiable Wiener-like filter bank optimized via complex-domain backpropagation, FSNN autonomously discovers and isolates the precise physical modes of a given task. Extensive evaluations demonstrate that FSNN establishes state-of-the-art predictive performance, achieving $77.0\%$ average accuracy on the standard 10 multivariate UEA datasets and leading across all major metrics on the highly imbalanced PTB-XL clinical ECG benchmark. Crucially, in contrast to yielding abstract feature maps, FSNN converges directly on physically meaningful frequency bands, such as isolating the cardiac QRS complex, providing a highly scalable, interpretable paradigm for robust pattern recognition in complex temporal domains. Our code is available at: https://github.com/ad6174hhhh/FSNN.

0.31

FPGA Acceleration of CNN-BiLSTM for EEG-Based Sleep Staging Featuring FFT-Based Non-Unit Stride Fast Convolution

cs.AR ·2026-10-31 ·Aaron Zhou, Yaqian Xu, Chen Chen, James Yen, Weihang Zheng +5 more
publishedhot direction similarity 0.59
Abstract · 15 pages. Accepted for publication in IEEE Open Journal of Circuits and Systems

Deep learning (DL) models for real-time wearable sleep staging often rely on long-kernel temporal convolutions, a requirement that current accelerators struggle to support efficiently. To overcome this, we present an FPGA-based CNN-BiLSTM accelerator that incorporates several algorithm-hardware co-design techniques to enable efficient edge inference. Central to this design is an FFT-based non-unit stride fast convolution, which performs accumulation in the frequency domain to enable a single IFFT per block, reducing post-processing complexity to $O(N\log N)$. On the target long-kernel convolution layer, this yields a 20.5$\times$ reduction in arithmetic operations. Power-of-two quantization is applied across the pipeline, including FFT-based convolution and BiLSTM activations, with an average accuracy degradation of only 0.11% relative to the floating-point baseline across all subjects on the public MASS-SS3 dataset. Additional optimizations, including block convolution, depth-first execution, and hardware engine reuse minimize memory access and enhance resource utilization. The accelerator, implemented on a Xilinx Zynq-7000 FPGA, operates at 10 MHz and consumes 11 mW of dynamic power including data handling and configuration overhead from a microcontroller. The design achieves a DSP power efficiency of 0.91 GOPS/W/DSP using only 4 DSPs, demonstrating scalable and energy-efficient DL acceleration for sleep staging that can be extended to other wearable applications.

0.64

Performance Analysis of Quantization-Aware Neural Channel Estimation with Low-Precision Inference

eess.SP ·2026-11-10 ·Joonas Törmälä, SaiKrishna Saketh Yellapragada, Eeli Susan, Esa Ollila
similarity 0.59
Abstract · Submitted to IEEE Wireless Communications and Networking Conference (WCNC) 2027

Neural channel estimators can improve radio performance of 5G receivers, but real-time deployment in the radio access network (RAN) imposes strict latency and power budgets. Prior studies of quantized neural channel estimators assess this cost through mean-squared error or analytic operation counts. In this paper, we train a 1D convolutional neural network (CNN) channel estimator for the 5G NR physical uplink shared channel (PUSCH) with INT8 and FP8 quantization-aware training (QAT), and we evaluate its radio performance together with its latency, power, and energy on an NVIDIA H100 GPU. On TDL-A and TDL-C channels at user equipment (UE) speeds up to 35 m/s, both 8-bit models stay within 0.025 dB of FP32 at 10% block error rate (BLER). At batch size 128, INT8 reduces the latency by 16%, the incremental GPU power by 33%, and the energy per query by 26%, compared with 6%, 26%, and 21% for FP8. INT8 is therefore the preferred format.

0.30

Channel-Informed Neural Network for Physical Layer Key Generation

cs.LG eess.SP ·2026-09-14 ·Jose Angel Sanchez Viloria, George Sklivanitis, Dimitris Pados, Elizabeth Serena Bentley
similarity 0.59
Abstract

Physical-layer key generation (PKG) enables wireless devices to establish shared keys from reciprocal channel observations without directly exchanging the key. This capability is attractive for edge networks, where distributed and resource-constrained devices may require lightweight key establishment with limited access to centralized infrastructure. We introduce a channel-informed neural network for PKG that derives binary key features directly from received IQ measurements while explicitly grounding the learned representation in the underlying multipath channel. The proposed multi-task recurrent neural network jointly learns reciprocity-preserving binary features and an auxiliary channel estimate using a training objective that combines deep metric learning with channel-informed supervision. Structured channel sounding enables channel estimation from over-the-air measurements, while Sionna-RT ray tracing is used to augment training with additional propagation conditions. We evaluate the framework using indoor and outdoor software-defined-radio measurements collected on the POWDER radio testbed. Across all evaluated scenarios, the proposed model produces lower bit disagreement for reciprocal Alice-Bob observations than for Eve-related observations. Ray-traced data augmentation substantially improves key diversity, increasing the unique-key rate to 0.94, 0.99, and 0.99 across the indoor and two outdoor scenarios, respectively. Successfully reconciled channel-informed keys pass the selected NIST randomness tests prior to SHA-3 privacy amplification. The results demonstrate the potential of channel-informed representation learning for decentralized wireless key establishment while highlighting an important tradeoff between key diversity and reconciliation reliability.

0.17