CS Paper Radar

Sub-100KB On-Device CNN Training via Dynamic Sparse Updates and Hardware--Software Co-Design

I-Hsuan Li, Tian-Sheuan Chang

cs.AR ·submitted 2026-11-11 09:28 UTC · v1
top venue

Abstract

The increasing demand for real-time processing and personalized deep learning has made edge-device training essential but challenging due to high memory and computational costs. To address this, we propose a Convolutional Neural Network (CNN) training accelerator with a dynamic sparse update mechanism that selectively updates important parameters using a random channel strategy, avoiding costly evaluations. Combined with activation pruning, our approach reduces activation storage to just 3.4\% of the original. Our hardware features a fused forward dataflow that concurrently processes group normalization and convolution, reducing training time by 45\% through computation reordering and efficient zero-skipping. Implemented in TSMC 28nm at FP8 precision, the design operates at 800 MHz, achieving 8 TOPS peak throughput, 31.13 TOPS/W energy efficiency, and 14.8 TOPS/mm$^2$ area efficiency, with power consumption ranging from 257 to 272 mW. The design enables on-device training within a sub-100KB on-chip SRAM budget (95KB in silicon).

Comment
published in AICAS 2026

Closest papers

Nearest neighbours by meaning across the whole index.

GaLe: memory-efficient Global Approximate and Local Exact features

cs.CV ·2026-09-02 ·Alberto Ancilotto, Elisabetta Farella
published similarity 0.72
Abstract

Embedded devices typically lack the resources of GPU-equipped machines, and existing inference methods suffer from either high computational overhead (patch-based) or accuracy loss (approximation-based). We propose GaLe, a memory-efficient technique that enables the deployment of pretrained networks on constrained devices without retraining. GaLe partitions feature maps into two components: a local exact (Le) representation that preserves fine details and a global approximate (Ga) representation that retains long-range dependencies. Unlike standard tiling, GaLe supports global operations and attention mechanisms found in hybrid CNN-transformer models. Validated on ImageNet, our method matches exact-inference performance while achieving up to 65% speedup and 90% RAM reduction on a Cortex-M33 compared to patch-based inference. We further demonstrate GaLe's versatility across classification, detection, and generation tasks, highlighting its potential as a foundation for resource-efficient architecture design.

0.30

NeuroFlex: Lossless Element-Level ANN-SNN Co-Execution for Efficient Sparse Inference

cs.AR cs.LG ·2026-09-12 ·Varun Manjunath, Pranav Ramesh, Gopalakrishnan Srinivasan
similarity 0.70
Abstract · This entry duplicates arXiv:2511.05215 and was submitted as a new article in error instead of as a replacement. The updated manuscript is no…

Sparse DNN accelerators specialize in ANN or SNN execution, leaving energy or latency on the table when workload characteristics vary within a layer. Hybrid accelerator designs that switch modes at layer or tile granularity suffer from low PE utilization since one core type idles whenever the other is active. NeuroFlex is the first accelerator to assign every output element independently to ANN or SNN execution mode with zero accuracy loss. We extend integer-exact ANN-SNN equivalence from layers to individual output elements, thereby enabling mode switching with no conversion error. An offline cost-guided scheduler scores each element by its marginal energy-delay trade-off and packs work across PEs, achieving 97-99% PE utilization compared to 40-45% for layer-wise hybrids. NeuroFlex reduces EDP by 57-67% over a strong ANN-only baseline and delivers up to 2.5x speedup over a dual-sparse SNN-only baseline. Our cost-guided scheduler improves throughput by 16-19% over random element assignment across vision, language, and transformer workloads.

0.11

SparseForge: Beyond Spike Sparsity toward Hardware-Exploitable Neuron Pruning for Efficient SNN Acceleration

cs.AR ·2026-11-01 ·Kainan Wang, Sanhe Fu, Aili Wang
publishedbenchmark similarity 0.69
Abstract · Author accepted manuscript. Published in IEEE Transactions on Circuits and Systems I: Regular Papers

Spiking Neural Networks (SNNs) provide an event-driven paradigm for energy-efficient edge computing. However, operation-level sparsity in SNNs does not necessarily eliminate the hardware costs associated with redundant output neurons, including neuron-state maintenance, partial-sum (psum) accesses, and on-chip storage requirements. This paper presents SparseForge, a hardware-aware sparse SNN acceleration framework that jointly optimizes neuron pruning, sparse dataflow, and accelerator microarchitecture. At the algorithm level, we introduce a gated leaky integrate-and-fire (G-LIF) neuron to learn differentiable neuron masks with binary spike semantics. A dual regularization scheme is further developed to align pruning with both synaptic-operation reduction and psum buffer capacity reduction. At the dataflow level, we design a sparse Column-Wise Product (CWP) dataflow with a variant of incremental spike encoding to improve weight-access regularity and reduce sparse-index overhead under dynamic spike activity. At the architecture level, we develop a mask-aware sparse processing unit (SPU) that supports compressed spike decoding, sparse implicit im2col conversion, neuron-mask-gated psum updates, and decoupled sparse execution. Experimental results across multiple SNN backbones and datasets show that SparseForge retains 1.75%--77.99% of neurons and 0.16%--62.36% of synaptic operations, with a configurable accuracy--efficiency trade-off. The buffer-capacity-aware regularization reduces the required psum buffer capacity by up to 96.18\%. FPGA implementations on a Xilinx ZCU9EG achieve 296.94--619.49 GOPS/W across the evaluated workloads. Across matched network and dataset settings, SparseForge provides 1.24--4.17 higher FPS and 1.50--7.18 higher GOPS/W than representative FPGA-based SNN accelerators, while reducing EDP by 1.70--19.13, with benchmark-dependent accuracy--efficiency trade-offs.

0.23

Adapting DNNs to Embrace Voltage Scaling Induced Errors via Accumulation-Aware Quantization

cs.AR cs.AI ·2026-10-24 ·Alexis Maras, Panagiotis Chaidos, Georgios Alexandris, Dimitrios Soudris, Sotirios Xydis
published similarity 0.68
Abstract · Accepted for publication at the 45rd International Conference on Computer-Aided Design (ICCAD '26), November 08-12, 2026, San Jose, CA, USA

The pervasive deployment of Deep Neural Networks (DNNs) across the computing spectrum has brought growing attention to energy efficiency, alongside raw performance. While voltage scaling is a potent knob for power reduction, its application in next-generation nodes is hampered by severe throughput degradation and susceptibility to process variation. This work aims to address these energy-reliability trade-offs by introducing a hardware-software co-design methodology, based on the observation that timing-robust bit ranges within the accumulator of a systolic array vary significantly across different voltage-frequency operating points. At the software level, we propose an Accumulation-Aware Training approach that incorporates this information as a first-order optimization constraint during training. By integrating mixed-precision quantization with unstructured pruning, we effectively constrain the model's weight distribution to avoid activating the hardware's sensitized high-rank carry chains. At the architectural level, we complement this with selective MSB-masking and fine-grained clock-gating to minimize unnecessary dynamic switching activity. Furthermore, we employ a layer-wise Dynamic Frequency Scaling strategy to further adapt to the accumulator's reduced dynamic range, based on the numerical sensitivity of each layer. We experimentally evaluate the proposed solution on a deep scaled 2nm technology node and demonstrate that, when operating at a low-voltage frontier, our co-optimized post-layout architecture delivers substantial energy and energy-delay product gains of 39% and 23% respectively, relative to the nominal voltage implementation, while maintaining accuracy degradation within 1%.

0.33

PSA: A Pruning-Friendly Sparse-Aware Accelerator for Efficient Sparse Convolution in SNNs

cs.AR ·2026-10-15 ·Sanhe Fu, Kainan Wang, Bo Wang, Aili Wang
top venue similarity 0.68
Abstract · Accepted to IEEE International Conference on Artificial Intelligence Circuits and Systems (AICAS 2026)

Spiking neural networks (SNNs) are promising for energy-efficient artificial intelligence due to their event-driven sparse computation, and neuron pruning can further reduce redundant operations. However, in practical hardware accelerators, spike sparsity and pruning-induced sparsity produce highly irregular sparse workloads that are difficult to execute efficiently. Existing approaches do not jointly support sparse-input execution, low-overhead sparse convolution lowering and pruning-friendly execution. This paper presents PSA, a Pruning-friendly Sparse-aware Accelerator for efficient sparse convolution in SNNs. PSA features a Sparse-Aware Merge-Accumulation (SAMA) dataflow that aligns sparse spike indices and converts irregular activations into continuous computation streams for efficient sparse convolution execution. It further introduces a Sparse Implicit Group-wise im2col (SIG-im2col) convolution lowering mechanism that converts sparse convolution into SpMM on-chip with low mapping cost and memory overhead. In addition, PSA integrates a lightweight pruning-friendly gating mechanism to directly support pruned SNNs. Results on ResNet-18/CIFAR-10 show that PSA achieves a 4.45x improvement in energy efficiency and an 18.52x reduction in energy-delay product (EDP) over the dense baseline.

0.41

BitSparse: Compact Activation Storage for ReLU Feed-Forward Networks

cs.LG ·2026-10-15 ·Max Zhu, Bohang Sun, Pietro Lio, Jialin Yu
similarity 0.67
Abstract

Reducing memory use in large language model (LLM) training is an ongoing challenge. Activation checkpointing saves memory by recomputation, while lossy compression changes the stored activations. The reemergence of sparse $\relu$ and $\relu^2$ activations creates a third opportunity: losslessly compressing the activation cache itself. We present BitSparse, a GPU-resident lossless compression format for sparse activations. Compression and reconstruction run in custom Triton kernels fused into an autograd function, shrinking the activation cache while recovering it exactly for the backward pass. Bfloat16 (BF16) and FP8 activations are supported. Optional sign-bit packing further increases compression up to close to the theoretical limit. We analyze its compression ratio and compare it to the theoretical optimum. BitSparse lowers per-token VRAM by 31\% and 30\% Modded-NanoGPT and Nemotron-H respectively, with overheads of no more than 1\% at practical sequence lengths. Additionally, a new preallocated buffer system avoids host synchronization during training when variable size tensors are allocated.

0.14

Theoretical and Empirical Analysis of Sparse Convolution

cs.PF cs.DCcs.LG ·2026-11-12 ·Keshvi Tuteja, Yu-Hsiang Tsai, Gregor Olenik, Markus Götz, Achim Streit +2 more
published similarity 0.67
Abstract · Accepted at AI on HPC Workshop at SC'26 (Supercomputing 2026)

Deep neural networks for image processing are increasingly deployed on resource-constrained edge devices such as drones, medical systems, and smartphones, where limited computational resources and memory bandwidth pose significant challenges for efficient inference. Pruning during training often produces highly sparse convolutional kernels, offering the potential to significantly reduce computation and memory requirements. However, exploiting this sparsity efficiently at runtime remains challenging due to irregular memory access patterns and workload imbalance across processing elements. In this work, we investigate the standard convolution with sparse weights and analyze its performance characteristics through roofline analysis, showing that a 3 x 3 sparse convolution achieves an arithmetic intensity of approximately 10 FLOP/byte compared to roughly 96 FLOP/byte for its dense counterpart. We propose techniques for an efficient sparse convolution at high sparsities. Preliminary results demonstrate that our approach achieves upto 1.65x speedup as compared to dense convolution on NVIDIA A100 and upto 1.52x on NVIDIA Jetson Nano (Tegra X1) , motivating further exploration of direct convolution as a practical path to efficient sparse inference on modern accelerators/edge devices.

0.21

Deep Microcompression: Structured Pruning and Bit-packed Quantization for Microcontrollers

cs.LG ·2026-09-04 ·Opegbemi Matthias Busoye, Tolulope Matthew Busoye, Eghonghon-aye Eigbe
published similarity 0.67
Abstract · Presented at the Global South ML Workshop at the International Conference on Machine Learning (ICML 2026), Seoul, South Korea

This paper introduces Deep Microcompression (DMC), a hardware-aware pipeline for deep learning inference on bare-metal microcontrollers. DMC integrates structured pruning, quantization-aware training, and fixed-length bit-packing to achieve a 55.8$\times$ weight compression ratio on LeNet-5 (98.77\% accuracy), generating a dependency-free C library with deterministic latency. On the RP2040 (Cortex-M0+), DMC reduces binary size by 3$\times$ versus TensorFlow Lite while matching its accuracy. Critically, DMC enables the first documented deployment of a standard CNN on the ATmega328P, a device constrained to 2KB SRAM, previously considered infeasible for CNN inference.

0.41