CS Paper Radar

SCALE-X: A Systematic Complexity-Aware Low-Precision Approach for Digital Predistortion

Anees Rehman, Mohd Tasleem Khan, George Goussetis, Yuan Ding, Jaiyu Hou, João F. C. Mota

eess.SP ·submitted 2026-09-08 09:31 UTC · v2

Abstract

This letter presents SCALE-X, a systematic, complexity-aware, low-precision, model-based digital predistortion (DPD) technique for power amplifiers with enhanced capabilities. The proposed approach employs a novel complexity-aware coefficient pruning method, which, when combined with optimized fixed-point modeling, enables more accurate capture of quantization effects and supports better informed decisions for implementation. Targeted configuration of model order, memory depth, and coefficient bitwidth delivers dramatic cuts in computational overhead without much sacrificing accuracy. Field-programmable gate array implementation demonstrates practical trade-offs with improved overall efficiency.

Closest papers

Nearest neighbours by meaning across the whole index.

StreamingDPD: A 1.28-GSa/s Instantaneous-Power-Gated Depthwise TCN Accelerator for Real-Time 320-MHz Digital Predistortion

eess.SP cs.AR ·2026-11-17 ·Yizhuo Wu, Xinling Wang, Chang Gao
similarity 0.58
Abstract

State feedback between successive samples limits the streaming throughput of recurrent neural networks for digital predistortion (DPD). We present StreamingDPD, an accelerator that processes 320-MHz signals at 1.28 GSa/s. Its 207-parameter instantaneous-power-gated depthwise temporal convolutional network (IPG-DWTCN) uses $|x[n]|^2$ to gate feature channels and causal dilated depthwise convolutions to model power amplifier memory. The network maps to a spatially unrolled fixed-point pipeline with shift-based quadratic activations and layer-wise mixed precision, sustaining one complex sample per cycle per lane. Its algorithmic cost is 554 floating-point operations per complex sample, 30.1% fewer than the recurrent baseline with the best linearization performance. In RF playback measurements on three power amplifiers driven by 40- to 320-MHz Wi-Fi 6/7 and 5G NR waveforms, IPG-DWTCN achieves the lowest mean adjacent-channel power ratio (ACPR) and ranks first or ties for first in mean error vector magnitude (EVM) against five neural baselines of comparable size. Four-lane FPGA hardware-in-the-loop tests on a 320-MHz 4096-QAM Wi-Fi 7 waveform achieve -45.82 dBc ACPR and -42.94 dB EVM at 1.28 GSa/s. At the same sample rate, post-layout evaluation of a single-lane 12-nm FinFET ASIC yields a 0.10 mm$^2$ core, a 52-cycle (40.63 ns) latency, and an estimated typical-corner power of 142.21 mW (111.10 pJ/sample). Relative to the prior 22-nm recurrent DPD ASIC, the design provides 5.1 times the throughput at about one-seventh the energy per sample.

0.25

Energy-Oriented CGLA Mapping of a Memory-Polynomial Digital Predistortion Kernel

cs.AR ·2026-09-23 ·Takuto Ando, Yasuhiko Nakashima
published similarity 0.55
Abstract · Accepted for presentation at the 2026 IEEE Asia Pacific Conference on Circuits and Systems (APCCAS 2026)

Memory-polynomial digital predistortion (DPD) evaluates a small fixed coefficient set over a sliding input history, so its reduction step is a complex-MAC workload with local reuse. We map this DPD reduction kernel onto In-Memory Accelerator eXtension (IMAX), a programmable CPU-Grounded Linear Array (CGLA) composed of a one-dimensional processing-element/local-memory pipeline. For a (P,M)=(5,5) odd-order memory-polynomial instance, the mapping keeps the 120 B coefficient set in local memory, advances the five-tap history over 1024-sample tiles, and realizes the 15 order-delay terms as a 33-stage streaming complex-MAC reduction. The evaluation measures kernel latency and modeled energy. All measured paths use the same single-precision complex workload of 32 sequences, each with 2048 complex samples, across an IMAX FPGA prototype, a CUDA implementation on an RTX 4090 system, and an ARM-NEON implementation on Jetson AGX Orin. With this 1024-sample tile configuration, the IMAX FPGA prototype reports 20.201 ms end-to-end latency and 1.948 ms kernel-only latency. Using the previously reported 28 nm IMAX frequency and power model, the projected IMAX configuration gives 3.14 ms end-to-end latency and 0.34 ms kernel-only latency. The RTX 4090 baseline has the lowest end-to-end latency at 0.484 ms. Under model-based platform power accounting and the stated power assumptions, the projected IMAX configuration gives 169.1 times smaller modeled end-to-end energy per batch than the RTX 4090 baseline. This value uses platform power assumptions rather than workload-dependent runtime power or a direct silicon power measurement. A controlled synthetic PA-model validation checks that the same 15-term form improves test-set NMSE by 26.1 dB and ACLR by 26.0 dB. These results characterize the mapped memory-polynomial DPD reduction on IMAX for the evaluated tile configuration and power model.

0.39

Joint Quantized Precoding and Bit Allocation for Fronthaul-Constrained Cell-Free Massive MIMO

cs.IT eess.SP ·2026-08-12 ·Özlem Tuğfe Demir
published similarity 0.52
Abstract · 5 pages, 2 figures, to be presented at IEEE SPAWC 2026

We study quantization-aware precoding for the downlink of cell-free massive MIMO systems with limited-resolution fronthaul. In such systems, the centrally designed precoder must be quantized before being conveyed to distributed access points (APs), creating a strong coupling between precoder design and fronthaul compression. To capture this effect, we develop an end-to-end signal model based on Bussgang decomposition, where the quantization distortion depends explicitly on the precoder coefficients. Building on this model, we formulate a joint precoding and bit allocation problem under per-AP power constraints and a total fronthaul bit budget. We propose an efficient block coordinate descent algorithm that iteratively updates the precoder, receive scaling, and distortion levels. Numerical results demonstrate that the proposed method significantly outperforms uniform bit allocation and quantization-unaware precoding schemes, particularly in fronthaul-limited regimes.

0.49

Joint Optimization of Antenna Partitioning and Distortion-Aware Precoding for Massive MIMO-OFDM with Peak Cancellation and In-Band Distortion Compensation

eess.SP ·2026-11-13 ·Zhuoran Li, Osamu Muta, Haris Gačanin
similarity 0.52
Abstract · This work has been submitted to the IEEE for possible publication

In massive MIMO-OFDM systems, peak cancellation (PC) reduces the peak-to-average power ratio but introduces in-band distortion, where compensation signals transmitted from a subset of antennas can suppress this distortion at the users. However, their effectiveness depends on the antenna partition and compensation precoder, while nonlinear power amplifiers (PAs) generate additional distortion. This paper proposes a joint optimization method for antenna partitioning and distortion-aware compensation precoding. To enable this joint optimization, we derive a covariance-based analytical model of PC and PA distortion to predict the per-user, per-subcarrier signal-to-interference-plusdistortion- and-noise ratio (SIDNR). The predicted SIDNR is used to select the compensation precoder regularization, the disjoint antenna partition, and the number of compensation antennas. Numerical results demonstrate that joint optimization of the antenna partition and compensation precoder regularization improves BER and SIDNR-based spectral efficiency compared with fixed-partition designs, particularly at high signal-to-noise ratios.

0.19

NEMESIS2.0: LLM-Aided Netlist-Driven Performance Equation Modeling for Accelerated Analog Circuit Sizing

cs.AR ·2026-11-13 ·Subhadip Ghosh, Ramesh Harjani, Sachin S. Sapatnekar
code/data similarity 0.50
Abstract · This paper is under review in the IEEE Transactions on Computer-Aided Design of Integrated Circuits & Systems (TCAD) : 14 pages

This work presents NEMESIS2.0, an open-source LLM-aided framework that automatically derives equation-based performance models for analog circuits. The resulting equations provide fast, accurate surrogates for SPICE evaluation. To validate the method, equation-based models are developed for seven circuit test cases in a commercial 65nm CMOS technology, covering 15 metrics on five operational transconductance amplifier topologies, and six metrics on two dynamic comparator topologies. When tested on 1000 unseen variants of these seven designs, each corresponding to a different set of independently sampled transistor sizes, the accuracy is found to be within 5% of SPICE. To demonstrate use cases for NEMESIS2.0, the generated models are used as performance evaluators in multiple transistor sizers based on different population-based stochastic search optimizers. For each of the seven test cases, transistor sizing is performed for 100 different sets of performance specifications, with final SPICE simulation confirming that 83.3% of the resulting designs meet all specifications after a single sizing run. The rest fail to meet the specifications due to discrepancies between the model and SPICE, and require iterative resizing under tightened specifications; all such scenarios meet specifications within five iterations. Within the transistor sizers, this equation-based performance analysis evaluates ~400 design candidates per second, versus 0.14 candidates per second for SPICE-based evaluation, achieving 196-238x sizing runtime speedup, including final SPICE verification.

0.26

Quantized Transformers for Massive MIMO Precoding with Automatic Resolution Tuning

eess.SP ·2026-10-03 ·Ghazal Kasalaee, Glodi Sala Mangituka, Ali Hasanzadeh Karkan, Jean-François Frigon, François Leduc-Primeau
similarity 0.50
Abstract · IEEE International Workshop on Signal Processing Systems (SiPS)

Deep learning precoders, particularly those based on Transformer architectures, offer superior spectral efficiency for Massive MIMO systems but may incur high computational cost. While existing mixed-precision quantization studies on convolutional neural networks establish important energy baselines, traditional discrete search methods fail to scale to the large parameter spaces of modern Transformers. To bridge this gap, we apply a differentiable precision learning technique to massive MIMO precoding. This approach autonomously and jointly optimizes weights, activations, quantization step sizes, and layer-wise bit-widths in a single training loop, directly optimizing for energy efficiency. We further expand this approach by incorporating Neural Architecture Search across various Transformer model sizes and evaluating the impact of random versus floating-point trained initializations on resolution tuning. Ultimately, we demonstrate that the proposed training method enables the deployment of highly compact Transformer precoders, improving energy efficiency by up to 288\(\times\) compared to the classical Weighted Minimum Mean Square Error algorithm at equal sum-rate performance in a dense downtown environment.

0.26

Adapting DNNs to Embrace Voltage Scaling Induced Errors via Accumulation-Aware Quantization

cs.AR cs.AI ·2026-10-24 ·Alexis Maras, Panagiotis Chaidos, Georgios Alexandris, Dimitrios Soudris, Sotirios Xydis
published similarity 0.49
Abstract · Accepted for publication at the 45rd International Conference on Computer-Aided Design (ICCAD '26), November 08-12, 2026, San Jose, CA, USA

The pervasive deployment of Deep Neural Networks (DNNs) across the computing spectrum has brought growing attention to energy efficiency, alongside raw performance. While voltage scaling is a potent knob for power reduction, its application in next-generation nodes is hampered by severe throughput degradation and susceptibility to process variation. This work aims to address these energy-reliability trade-offs by introducing a hardware-software co-design methodology, based on the observation that timing-robust bit ranges within the accumulator of a systolic array vary significantly across different voltage-frequency operating points. At the software level, we propose an Accumulation-Aware Training approach that incorporates this information as a first-order optimization constraint during training. By integrating mixed-precision quantization with unstructured pruning, we effectively constrain the model's weight distribution to avoid activating the hardware's sensitized high-rank carry chains. At the architectural level, we complement this with selective MSB-masking and fine-grained clock-gating to minimize unnecessary dynamic switching activity. Furthermore, we employ a layer-wise Dynamic Frequency Scaling strategy to further adapt to the accumulator's reduced dynamic range, based on the numerical sensitivity of each layer. We experimentally evaluate the proposed solution on a deep scaled 2nm technology node and demonstrate that, when operating at a low-voltage frontier, our co-optimized post-layout architecture delivers substantial energy and energy-delay product gains of 39% and 23% respectively, relative to the nominal voltage implementation, while maintaining accuracy degradation within 1%.

0.33

Tri-Hybrid SWIPT with Reconfigurable Parasitic Antennas

eess.SP cs.IT ·2026-10-09 ·Thien Duc Hua, Mohammadali Mohammadi, Hien Quoc Ngo, Michail Matthaiou
similarity 0.49
Abstract

We propose a coupling-aware tri-hybrid precoding architecture for simultaneous wireless information and power transfer (SWIPT) using reconfigurable parasitic antennas. By integrating multiport network theory and information theory, we develop a third precoding layer that explicitly accounts for mutual coupling and reactive energy storage within the antenna domain. To efficiently optimize this architecture, we propose a low-complexity tri-hybrid solution comprising coordinate descent (CD) for parasitic reactive load optimization, a singular value decomposition (SVD)-based analog precoder, and a protective partial zero-forcing (PPZF) digital precoder. Numerical results demonstrate that the transmit array introduces impedance mismatch that reduces the real power accepted by the antenna array. Moreover, the proposed tri-hybrid architecture significantly outperforms hybrid precoding by constructively exploiting the coupling effects, yielding substantial gains in spectral efficiency (SE) and sum non-linear harvested energy (NLHE) at a fraction of the hardware cost.

0.35