CS Paper Radar

Quantized Transformers for Massive MIMO Precoding with Automatic Resolution Tuning

Ghazal Kasalaee, Glodi Sala Mangituka, Ali Hasanzadeh Karkan, Jean-François Frigon, François Leduc-Primeau

eess.SP ·submitted 2026-10-03 01:30 UTC · v1

Abstract

Deep learning precoders, particularly those based on Transformer architectures, offer superior spectral efficiency for Massive MIMO systems but may incur high computational cost. While existing mixed-precision quantization studies on convolutional neural networks establish important energy baselines, traditional discrete search methods fail to scale to the large parameter spaces of modern Transformers. To bridge this gap, we apply a differentiable precision learning technique to massive MIMO precoding. This approach autonomously and jointly optimizes weights, activations, quantization step sizes, and layer-wise bit-widths in a single training loop, directly optimizing for energy efficiency. We further expand this approach by incorporating Neural Architecture Search across various Transformer model sizes and evaluating the impact of random versus floating-point trained initializations on resolution tuning. Ultimately, we demonstrate that the proposed training method enables the deployment of highly compact Transformer precoders, improving energy efficiency by up to 288\(\times\) compared to the classical Weighted Minimum Mean Square Error algorithm at equal sum-rate performance in a dense downtown environment.

Comment
IEEE International Workshop on Signal Processing Systems (SiPS)

Closest papers

Nearest neighbours by meaning across the whole index.

Extreme Low-State Quantized Transformer for Electricity-Load Forecasting

cs.LG ·2026-10-20 ·Muhammad Sabbir Alam, Harindra Sandun Mavikumbure, Victor Cobilean, Milos Manic, Jayasimha Atulasimha
similarity 0.71
Abstract

Aggressive low-state weight quantization can substantially reduce neural-network representational flexibility, making predictive performance difficult to preserve when only a few discrete weight states are available. We investigate this regime for Transformer-based electricity-load forecasting using 3-, 5-, 7-, and 16-state weight quantization across feed-forward-only and attention-plus-feed-forward quantization. Two tasks predict either the next hour or the next 24 hours from the preceding 48 hours across two co-primary electricity-consumption datasets. Direct post-training quantization (PTQ) increased mean normalized root-mean-square error (NRMSE) relative to full precision by 6.25 and 7.04 percentage points in Datasets A and B, whereas quantization-aware fine-tuning (QAT-FT) recovered approximately 90.2% and 94.5% of these penalties. Quantization-aware training from random initialization (Scratch-QAT) also produced competitive low-state solutions, with particularly favorable behavior at three states. We further introduce accumulated-update thresholding, which accumulates optimizer-proposed weight changes before commitment. Relative to paired Scratch-QAT controls, this reduced committed shadow-weight updates by approximately 99.7% and discrete state transitions by approximately 77--80%, while mean NRMSE changed by only +0.042 and +0.197 percentage points. These results show that useful Transformer forecasting can be retained under highly discrete weight representations while strongly suppressing target-state activity, supporting a prospective route toward compact, low-activity edge forecasting using multilevel synaptic devices.

0.17

The Devil Is in the Reconstruction Loss Scale: Rethinking Optimization in LLM Quantization

cs.CL cs.AI ·2026-10-01 ·Chao Li, Shigeng Wang, Anbang Yao
code/data similarity 0.67
Abstract · Project page: https://github.com/IntelChina-AI/RMSE

Post-training quantization (PTQ) methods typically use sequential quantization that partitions a pre-trained LLM into a series of units (e.g., transformer blocks), with one unit quantized at each stage. State-of-the-art PTQ methods are predominantly learning-based, optimizing auxiliary quantization parameters (e.g., scaling factors, rotation matrices, clipping thresholds, and adapters) via gradient descent to minimize a reconstruction loss. A common practice is to use mean squared error (MSE) as the reconstruction loss function, yet its induced optimization behavior remains largely unexplored. In this work, we take a holistic view of sequential quantization and systematically investigate how optimization evolves from the first quantization stage to the last, aiming for a deep understanding of optimization in learning-based PTQ schemes. Through extensive empirical studies spanning representative learning-based PTQ methods, LLM families, model scales, architectures, quantization settings and various tasks, we consistently uncover Optimization Imbalance: reconstruction loss magnitudes vary dramatically across stages, accompanied by highly uneven gradient magnitudes and parameter updates under MSE. We term the cross-stage range of loss magnitudes the reconstruction loss scale, and reveal that MSE translates the unexpectedly large reconstruction loss scale into highly uneven gradient magnitudes, which in turn lead to uneven optimization strength across quantization stages. This finding suggests a general principle for improving learning-based PTQ: optimization strength across stages should be decoupled from the reconstruction loss scale. Theoretically, we show that root mean squared error (RMSE) variants defined at the sample, channel, token, and element levels naturally realize this principle through implicit gradient normalization, outperforming MSE significantly as a drop-in replacement.

0.34

FlashLoop: Fast and Memory-Efficient Looped Transformers via Lazy Updates

cs.LG ·2026-09-24 ·Wanqi Yang, Shiwei Liu
highly cited similarity 0.67
Abstract · 15 pages, 9 figures

Looped Transformers have attracted substantial attention as a parameter-efficient approach to increasing computational depth through repeated application of shared Transformer blocks. However, their practical advantages over conventional Transformers remain under debate: each additional loop incurs another Transformer pass and requires caching another set of KV states, causing inference FLOPs and KV-cache memory to grow continuously with loop depth. This overhead becomes particularly severe at large loop counts and long context, preventing the parameter efficiency of Looped Transformers from translating into practical inference efficiency. In this paper, we find that much of the additional computation and storage introduced by looping is redundant. As recurrence proceeds, state changes become increasingly concentrated on a small subset of tokens; attention-output differences are dominated by a sparse and stable subset of key columns; and KV residuals between adjacent loops become progressively more amenable to low-bit quantization. Building on these observations, we introduce FlashLoop, a training-free inference framework that reduces cross-loop redundancy through token-sparse updates, sparse attention, and KV-residual quantization. Across several Looped Transformers models, FlashLoop delivers lossless accuracy while achieving up to 1.64$\times$ end-to-end speedup and up to 6$\times$ KV-cache memory reduction, substantially improving the practicality of scaling Looped Transformers to greater computational depths and longer context.

0.49

VLCQ: Post-training quantization for deep neural networks using variable length coding

cs.CV cs.AIcs.PF ·2026-10-10 ·Reem Abdel-Salam, Ahmed H. Abdel-Gawad, Amr G. Wassal
publishedhighly cited similarity 0.66
Abstract · Published in Future Generation Computer Systems, Volume 166 (2025), Article 107654

Quantization plays a crucial role in efficiently deploying deep learning models on resource-constrained devices. Post-training quantization does not require access to the original dataset or retraining the full model. Current methods that achieve high performance close to baseline results typically require INT8 fixed-point integers. However, achieving higher model compression with lower bit-widths often leads to significant performance degradation. In this paper, we propose VLCQ, a post-training quantization method that relaxes the fixed-point encoding constraint, enabling more flexible exploration of quantization techniques through variable-length encoding. This approach achieves competitive or improved performance while reducing bit-widths, without requiring access to training data or model fine-tuning. Extensive experiments on image classification, segmentation, and object detection demonstrate that VLCQ improves model compression and accuracy compared with state-of-the-art post-training quantization approaches. For per-channel quantization, VLCQ surpasses FP32 accuracy and Piece-Wise Linear Quantization (PWLQ) on most evaluated models, achieving up to 6x compression compared with FP32 and up to 1.7x compared with PWLQ. When prioritizing compression with limited accuracy loss, VLCQ achieves up to 12.25x compression compared with FP32 with less than 4% performance degradation. For per-tensor quantization, VLCQ is competitive with Data-Free Quantization (DFQ), while providing greater flexibility to achieve lower bit rates across different tasks and models.

0.57

ResidualQuant: KV Cache Quantization for Looped Transformers with 2-Bit Residuals

cs.LG ·2026-10-07 ·Heejun Kim, Junyoung Lee, SangLyul Cho, Dongsu Han, Insu Han +1 more
highly cited similarity 0.66
Abstract

Looped Transformers improve parameter efficiency by applying shared Transformer blocks over recurrent loops, increasing computational depth without increasing the parameter count. However, KV cache memory still scales with loop count, becoming a key memory bottleneck that limits batch size and inference throughput. KV cache quantization can alleviate this bottleneck, but existing methods often suffer substantial accuracy degradation at aggressive low-precision regimes. We observe that looped Transformers offer a unique opportunity: KV states across loops are highly similar. Based on this observation, we propose ResidualQuant, which uses the final-loop KV states as a reference and represents the remaining loops with low-precision residuals. Our method further combines least-square scaling and rotation-based quantization, as well as loop-wise mixed precision, to enable accurate quantization down to INT2 while retaining efficient reconstruction. Across multiple looped Transformer models and mathematical reasoning and code generation benchmarks, ResidualQuant consistently improves the accuracy-memory tradeoff over state-of-the-art rotation-based KV quantization. In particular, our method retains accuracy close to BF16 under mixed-precision settings while reducing theoretical KV storage by 80.7%, achieving up to 13.0% higher accuracy than the rotation-based baseline at nearly the same memory budget. On an RTX 5090, reduced KV memory traffic improves fixed-batch decode throughput by up to 3.66x, while the smaller memory footprint enables up to 8x larger batches, improving peak throughput by up to 5.38x.

0.45

LoopQuant: Accurate and Efficient Post-Training Quantization for Looped Transformers

cs.LG cs.AI ·2026-10-12 ·Zhixiong Zhao, Zukang Xu, Xing Hu, Lifeng Liu, Guangyu Sun +1 more
code/data similarity 0.66
Abstract

Looped Language Models (LoopLMs) improve parameter efficiency by recursively reusing shared Transformer modules, yet their repeated computation over evolving recurrent states poses new challenges for low-bit deployment. Existing post-training quantization (PTQ) methods, largely designed for feed-forward Transformers, fail to account for cross-loop activation dynamics, heterogeneous loop sensitivity, and recursive error propagation, leading to substantial performance degradation at low precision. To address these challenges, we propose LoopQuant, a loop-aware PTQ framework for accurate and efficient low-bit quantization of LoopLMs. LoopQuant is built on three core components: 1) Cross-Loop Distribution Canonicalization (CLDC) learns a shared quantization-friendly representation across recurrent states while preserving parameter sharing; 2) Interaction-Aware Loop-wise Precision Allocation (ILPA) allocates activation precision under a fixed bit budget by modeling task-level loop sensitivity and cross-loop interactions; and 3) Loop-Conditioned Task Calibration (LCTC) further aligns quantized inference with the low-bit recursive trajectory through lightweight task-space calibration. Extensive experiments across LoopLM architectures demonstrate that LoopQuant consistently outperforms existing low-bit PTQ methods. On Ouro-2.6B, LoopQuant under W4A4 surpasses all W4A8 baselines in performance, while reducing model memory by 65.3% with only 3.4% additional storage overhead over naive INT4 and achieving a 1.7 times decoding speedup over BF16. These results demonstrate a strong balance among accuracy, compression, and inference efficiency, providing a practical and deployment-friendly solution for low-bit LoopLM inference. The code is available at [https://github.com/Kishon-zzx/LoopQuant].

0.34

16-bit Precision of Convolutional Neural Networks on Microcontroller Units for 8-bit Costs

cs.LG ·2026-10-02 ·Rui Liu, Benjamin Paaßen
similarity 0.66
Abstract

To deploy deep neural networks on edge hardware, highly efficient inference schemes are necessary that retain high accuracy. This work presents W16A16, a high precision (16-bit), fast speed, low energy quantization method. On a widely applied microcontroller architecture Armv7E-M, our proposed approach achieves faster speed and lower energy consumption on layer- and model-level compared to alternative quantization schemes. We analyze the architecture of Armv7E-M, explain the underlying principles behind the performance advantages of 16-bit approaches, and evaluate the empiric quantization errors for regression and classification tasks, as well as empiric time- and energy consumption in MCU deployment. We observe ca.\ 10 times lower quantization errors compared to 8-bit quantization schemes while achieving similar or better inference times and energy consumption.

0.09

TR-PTQ: High-Accuracy Integer-Only Transformer Post Training Quantization via Taylor Region Reformulation

cs.LG ·2026-10-07 ·Eliyahu Levy, Adam Teman, Yoni Pugachov
similarity 0.65
Abstract

Post-training quantization (PTQ) enables efficient deployment, yet transformer architectures remain challenging to quantize due to nonlinear layers. While existing methods attribute accuracy loss to insufficient numerical precision, often necessitating floating-point fallbacks, we demonstrate that degradation is actually driven by specific structural error sources. We find that learned scale parameters in normalization layers and compounded approximations in GELU are the primary error contributors, whereas SoftMax remains inherently robust to aggressive quantization. To address these bottlenecks, we introduce TR-PTQ, a unified integer-only formulation using shared Taylor Region (TR) exponential and logarithm primitives. This approach allows computationally expensive operations, including division and square roots, to be performed entirely in the log-domain via standard integer arithmetic. Combined with a calibration-free, outlier-aware optimization for LayerNorm parameters, our method eliminates the need for floating-point hardware units for nonlinearities, achieving less than 1.5\% absolute accuracy degradation across vision and language benchmarks.

0.23