CS Paper Radar

Extreme Low-State Quantized Transformer for Electricity-Load Forecasting

Muhammad Sabbir Alam, Harindra Sandun Mavikumbure, Victor Cobilean, Milos Manic, Jayasimha Atulasimha

cs.LG ·submitted 2026-10-20 18:15 UTC · v1

Abstract

Aggressive low-state weight quantization can substantially reduce neural-network representational flexibility, making predictive performance difficult to preserve when only a few discrete weight states are available. We investigate this regime for Transformer-based electricity-load forecasting using 3-, 5-, 7-, and 16-state weight quantization across feed-forward-only and attention-plus-feed-forward quantization. Two tasks predict either the next hour or the next 24 hours from the preceding 48 hours across two co-primary electricity-consumption datasets. Direct post-training quantization (PTQ) increased mean normalized root-mean-square error (NRMSE) relative to full precision by 6.25 and 7.04 percentage points in Datasets A and B, whereas quantization-aware fine-tuning (QAT-FT) recovered approximately 90.2% and 94.5% of these penalties. Quantization-aware training from random initialization (Scratch-QAT) also produced competitive low-state solutions, with particularly favorable behavior at three states. We further introduce accumulated-update thresholding, which accumulates optimizer-proposed weight changes before commitment. Relative to paired Scratch-QAT controls, this reduced committed shadow-weight updates by approximately 99.7% and discrete state transitions by approximately 77--80%, while mean NRMSE changed by only +0.042 and +0.197 percentage points. These results show that useful Transformer forecasting can be retained under highly discrete weight representations while strongly suppressing target-state activity, supporting a prospective route toward compact, low-activity edge forecasting using multilevel synaptic devices.

Closest papers

Nearest neighbours by meaning across the whole index.

Quantized Transformers for Massive MIMO Precoding with Automatic Resolution Tuning

eess.SP ·2026-10-03 ·Ghazal Kasalaee, Glodi Sala Mangituka, Ali Hasanzadeh Karkan, Jean-François Frigon, François Leduc-Primeau
similarity 0.71
Abstract · IEEE International Workshop on Signal Processing Systems (SiPS)

Deep learning precoders, particularly those based on Transformer architectures, offer superior spectral efficiency for Massive MIMO systems but may incur high computational cost. While existing mixed-precision quantization studies on convolutional neural networks establish important energy baselines, traditional discrete search methods fail to scale to the large parameter spaces of modern Transformers. To bridge this gap, we apply a differentiable precision learning technique to massive MIMO precoding. This approach autonomously and jointly optimizes weights, activations, quantization step sizes, and layer-wise bit-widths in a single training loop, directly optimizing for energy efficiency. We further expand this approach by incorporating Neural Architecture Search across various Transformer model sizes and evaluating the impact of random versus floating-point trained initializations on resolution tuning. Ultimately, we demonstrate that the proposed training method enables the deployment of highly compact Transformer precoders, improving energy efficiency by up to 288\(\times\) compared to the classical Weighted Minimum Mean Square Error algorithm at equal sum-rate performance in a dense downtown environment.

0.26

The Devil Is in the Reconstruction Loss Scale: Rethinking Optimization in LLM Quantization

cs.CL cs.AI ·2026-10-01 ·Chao Li, Shigeng Wang, Anbang Yao
code/data similarity 0.65
Abstract · Project page: https://github.com/IntelChina-AI/RMSE

Post-training quantization (PTQ) methods typically use sequential quantization that partitions a pre-trained LLM into a series of units (e.g., transformer blocks), with one unit quantized at each stage. State-of-the-art PTQ methods are predominantly learning-based, optimizing auxiliary quantization parameters (e.g., scaling factors, rotation matrices, clipping thresholds, and adapters) via gradient descent to minimize a reconstruction loss. A common practice is to use mean squared error (MSE) as the reconstruction loss function, yet its induced optimization behavior remains largely unexplored. In this work, we take a holistic view of sequential quantization and systematically investigate how optimization evolves from the first quantization stage to the last, aiming for a deep understanding of optimization in learning-based PTQ schemes. Through extensive empirical studies spanning representative learning-based PTQ methods, LLM families, model scales, architectures, quantization settings and various tasks, we consistently uncover Optimization Imbalance: reconstruction loss magnitudes vary dramatically across stages, accompanied by highly uneven gradient magnitudes and parameter updates under MSE. We term the cross-stage range of loss magnitudes the reconstruction loss scale, and reveal that MSE translates the unexpectedly large reconstruction loss scale into highly uneven gradient magnitudes, which in turn lead to uneven optimization strength across quantization stages. This finding suggests a general principle for improving learning-based PTQ: optimization strength across stages should be decoupled from the reconstruction loss scale. Theoretically, we show that root mean squared error (RMSE) variants defined at the sample, channel, token, and element levels naturally realize this principle through implicit gradient normalization, outperforming MSE significantly as a drop-in replacement.

0.34

LoopQuant: Accurate and Efficient Post-Training Quantization for Looped Transformers

cs.LG cs.AI ·2026-10-12 ·Zhixiong Zhao, Zukang Xu, Xing Hu, Lifeng Liu, Guangyu Sun +1 more
code/data similarity 0.63
Abstract

Looped Language Models (LoopLMs) improve parameter efficiency by recursively reusing shared Transformer modules, yet their repeated computation over evolving recurrent states poses new challenges for low-bit deployment. Existing post-training quantization (PTQ) methods, largely designed for feed-forward Transformers, fail to account for cross-loop activation dynamics, heterogeneous loop sensitivity, and recursive error propagation, leading to substantial performance degradation at low precision. To address these challenges, we propose LoopQuant, a loop-aware PTQ framework for accurate and efficient low-bit quantization of LoopLMs. LoopQuant is built on three core components: 1) Cross-Loop Distribution Canonicalization (CLDC) learns a shared quantization-friendly representation across recurrent states while preserving parameter sharing; 2) Interaction-Aware Loop-wise Precision Allocation (ILPA) allocates activation precision under a fixed bit budget by modeling task-level loop sensitivity and cross-loop interactions; and 3) Loop-Conditioned Task Calibration (LCTC) further aligns quantized inference with the low-bit recursive trajectory through lightweight task-space calibration. Extensive experiments across LoopLM architectures demonstrate that LoopQuant consistently outperforms existing low-bit PTQ methods. On Ouro-2.6B, LoopQuant under W4A4 surpasses all W4A8 baselines in performance, while reducing model memory by 65.3% with only 3.4% additional storage overhead over naive INT4 and achieving a 1.7 times decoding speedup over BF16. These results demonstrate a strong balance among accuracy, compression, and inference efficiency, providing a practical and deployment-friendly solution for low-bit LoopLM inference. The code is available at [https://github.com/Kishon-zzx/LoopQuant].

0.34

Pretraining Transformers with Quantized Softmax in Attention

cs.LG ·2026-09-27 ·Shangzhen Zhu, Muyan Hu, Tomasz Kozlowski
similarity 0.62
Abstract

Low-precision Transformer systems increasingly quantize attention matrix multiplications, while softmax often remains at higher precision. During pretraining, an approximate softmax changes the gradients that train the model as well as its forward computation. We study this interaction with K-interval attention, which approximates the exponential using K+1 grid values. We vary per-row grid calibration, interpolation versus hard rounding, and the placement of a straight-through surrogate relative to normalization. We derive the corresponding backward rules, including calibration derivatives, and compare these choices in pretraining experiments matched on model, data, and optimizer. Detaching the row extrema leaves the forward computation unchanged but produces a delayed increase in validation loss. With hard rounding at K=4, min-max calibration and a pre-normalization surrogate incur a large loss gap; changing either choice substantially reduces it. At 124M parameters and 2.5B training tokens, fixed-window calibration with a post-normalization surrogate yields a validation loss gap of +0.019 nats relative to softmax at K=4, and with a pre-normalization surrogate yields +0.004 nats at K=16.

0.29

FlashLoop: Fast and Memory-Efficient Looped Transformers via Lazy Updates

cs.LG ·2026-09-24 ·Wanqi Yang, Shiwei Liu
highly cited similarity 0.62
Abstract · 15 pages, 9 figures

Looped Transformers have attracted substantial attention as a parameter-efficient approach to increasing computational depth through repeated application of shared Transformer blocks. However, their practical advantages over conventional Transformers remain under debate: each additional loop incurs another Transformer pass and requires caching another set of KV states, causing inference FLOPs and KV-cache memory to grow continuously with loop depth. This overhead becomes particularly severe at large loop counts and long context, preventing the parameter efficiency of Looped Transformers from translating into practical inference efficiency. In this paper, we find that much of the additional computation and storage introduced by looping is redundant. As recurrence proceeds, state changes become increasingly concentrated on a small subset of tokens; attention-output differences are dominated by a sparse and stable subset of key columns; and KV residuals between adjacent loops become progressively more amenable to low-bit quantization. Building on these observations, we introduce FlashLoop, a training-free inference framework that reduces cross-loop redundancy through token-sparse updates, sparse attention, and KV-residual quantization. Across several Looped Transformers models, FlashLoop delivers lossless accuracy while achieving up to 1.64$\times$ end-to-end speedup and up to 6$\times$ KV-cache memory reduction, substantially improving the practicality of scaling Looped Transformers to greater computational depths and longer context.

0.49

An Empirical Benchmark of Deep Time-Series Models for Smart Meter Energy Forecasting

cs.LG ·2026-08-19 ·Behnaz Kavoosighafi, Maria Eidenskog, Wiktoria Glad, Katerina Vrotsou
publishedbenchmarkcode/data similarity 0.62
Abstract

Accurate forecasting of energy consumption is important for the efficient operation of power systems, with direct implications for operational costs, energy management, and system maintenance. Due to the availability of extensive high-resolution consumption data from smart meters, data-driven methods have been used for short-term and long-term forecasting. However, their comparative performance on real-world smart meter data is still not well studied. In this paper, we present an empirical benchmark of nine modern deep learning models for time-series forecasting, including linear, MLP-based, convolutional, and Transformer architectures. We evaluate these models on two publicly available smart meter datasets. Our analysis focuses on three factors that strongly affect forecasting performance: the length of historical input, the prediction horizon, and the choice of model architecture. We show that extending the historical context improves accuracy, but only up to a saturation point, after which additional input provides limited benefit. In contrast, accuracy decreases as the prediction horizon increases. We also investigate the trade-off between prediction accuracy and computational complexity, and assess the statistical significance and practical magnitude of performance differences across models. Our results show that deep learning models consistently outperform classical baselines, while lightweight architectures achieve relatively similar performance at significantly lower computational cost. Additionally, architectural differences only become meaningful at longer forecasting horizons and on more heterogeneous datasets. Finally, a subgroup analysis across geodemographic and household categories shows that model choice has limited impact for most population segments.

0.59

Quantization-Aware Pre-Training with Constrained Empirical Weight Distribution

cs.LG ·2026-09-26 ·Ningfeng Yang, Tor M. Aamodt
code/data similarity 0.62
Abstract · Preprint

Quantization-Aware Pre-Training (QAPT) can increase the inference efficiency of DNNs, but a problematic behaviour known as rounding boundary weight oscillation can introduce detrimental noise into the training process and significantly reduce convergence speed. While existing methods can reduce this detrimental noise, they either introduce additional hyperparameters or memory overhead, or cannot consistently improve model accuracy. In this work, we propose optimization with $\textbf{C}$onstrained $\textbf{E}$mpirical $\textbf{W}$eight dis$\textbf{T}$ribution (CEWT), the first hyperparameter-free memory-overhead-free oscillation suppression method that consistently improves QAPT performance: an optimizer post-update step that projects weights to the nearest point in weight space whose empirical distribution (histogram) matches a zero-mean Gaussian. Our key insight is many quantizers are designed with the implicit assumption that the to-be-quantized data are permutations of samples from a zero-mean Gaussian, and this assumption is not true during QAPT. By enforcing the zero-mean Gaussian prior as a hard constraint, CEWT can suppress this detrimental noise. Empirical results on various combinations of SOTA quantizers and hypersphere optimizers suggest, that with a geomean increase of 4% in training time, CEWT can consistently reduce the pre-training perplexity (by an average of 2.5 and up to 21 points) of low-precision (down to 1-bit activations and weights and up to 610M parameters) LLaMA/GPT models without introducing any hyperparameters or storage overhead. Code is available at https://github.com/1733116199/cewt

0.32

DAQ: Decision-Aligned Post-Training Quantization for Spiking Transformers

cs.AI cs.LG ·2026-11-17 ·Jialin Chen, Xiaochen Zhao, Aili Wang
similarity 0.62
Abstract

Spiking transformers combine attention-based representation learning with sparse spike communication, yet their weights and membrane variables still incur substantial storage and computation overhead. Post-training quantization (PTQ) offers a practical way to reduce these overheads, but preserving neuronal firing under weight and membrane quantization remains challenging. In this paper, we propose Decision-Aligned Post-Training Quantization (DAQ), a method that calibrates the quantizers to align neuronal firing decisions with those of a floating-point reference. We analyze how errors from these quantizers affect firing at decision boundaries and how they propagate over time steps in recurrent neurons. Based on this analysis, we formulate an objective that encourages quantized membrane variables to remain within the reference firing regions along the quantized model's own state trajectory. Experiments across multiple spiking transformer architectures on image classification, semantic segmentation, and event-based tracking demonstrate the effectiveness of DAQ with 4-bit weights and membrane variables. On FE108, DAQ achieves 58.8\% AUC and 90.9\% PR with SDTrack, while reducing energy by 66.2\%.

0.07