CS Paper Radar

MIRAGE: A GPU-Accelerated IQ-Level Channel Emulator for Real-Time Wireless Digital Twins

Ali Saeizadeh, Angelo Feraudo, Avaneeth Anil, Leonardo Bonati, Pedram Johari, Tommaso Melodia

cs.NI eess.SP ·submitted 2026-10-28 21:08 UTC · v1

Abstract

Wireless digital twins enable network policies to be evaluated before deployment, but reproducing channel effects within a running protocol stack requires continuous waveform processing under strict timing constraints. We present MIRAGE, a GPU-accelerated channel emulator that applies propagation effects directly to in-phase and quadrature samples exchanged by software 5G New Radio stacks. MIRAGE combines batched multiuser, multiantenna filtering with timestamped shared-memory transport and radio-driver integrations for OpenAirInterface and OCUDU. External propagation models supply channel responses asynchronously, while versioned buffers ensure consistent coefficients within each processing interval. Experiments on one NVIDIA H100 GPU evaluate waveform accuracy, processing time, channel updates, and full-stack traffic delivery. At 61.44 million samples per second, eight single-antenna links, four two-by-two links, and one four-by-four link meet the tested 0.5 ms bidirectional processing criterion. Waveform errors remain within one integer quantization step per component, with no mixed coefficient versions across 16.7 million analyzed slots. Integration with the X5G testbed enables slice resource allocations to be evaluated before deployment. Both evaluated slices ultimately satisfy their throughput caps, requiring one physical reconfiguration under line-of-sight conditions and four under non-line-of-sight conditions. These results demonstrate full-stack policy evaluation and expose prediction errors affecting transfer to a physical network.

Comment
14 pages, 12 figures, 3 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Performance Analysis of Quantization-Aware Neural Channel Estimation with Low-Precision Inference

eess.SP ·2026-11-10 ·Joonas Törmälä, SaiKrishna Saketh Yellapragada, Eeli Susan, Esa Ollila
similarity 0.61
Abstract · Submitted to IEEE Wireless Communications and Networking Conference (WCNC) 2027

Neural channel estimators can improve radio performance of 5G receivers, but real-time deployment in the radio access network (RAN) imposes strict latency and power budgets. Prior studies of quantized neural channel estimators assess this cost through mean-squared error or analytic operation counts. In this paper, we train a 1D convolutional neural network (CNN) channel estimator for the 5G NR physical uplink shared channel (PUSCH) with INT8 and FP8 quantization-aware training (QAT), and we evaluate its radio performance together with its latency, power, and energy on an NVIDIA H100 GPU. On TDL-A and TDL-C channels at user equipment (UE) speeds up to 35 m/s, both 8-bit models stay within 0.025 dB of FP32 at 10% block error rate (BLER). At batch size 128, INT8 reduces the latency by 16%, the incremental GPU power by 33%, and the energy per query by 26%, compared with 6%, 26%, and 21% for FP8. INT8 is therefore the preferred format.

0.39

Design and Over-the-Air Evaluation of a Digital Twin-Driven Site-Specific Neural Receiver for 5G NR on NVIDIA DGX Spark

eess.SP ·2026-11-10 ·Qiuyuan Chen, Chengyang Yao, Liuchang Zhuo, Yuquan Sun, Cunhua Pan +2 more
hot direction similarity 0.61
Abstract

We design and evaluate a site-specific neural receiver for the 5G New Radio (NR) uplink. A corridor digital twin built from a radar scan and refined manually provides 28,671 ray-traced channel records for training an eight-round convolutional graph neural network with pilot-aware inputs and auxiliary channel supervision. The GPU on NVIDIA DGX Spark evaluates time--frequency convolutions in parallel across the received grid to accelerate inference. The receiver uses the standard NR uplink waveform and reference signals and feeds soft bits to the existing transport-block decoder. In over-the-air tests with NI USRP B210 radios under common radio settings, the site-trained receiver achieves the highest mean uplink rate at all five positions. At a non-line-of-sight corner, it reaches 16.2 Mb/s, compared with 4.1 Mb/s for the conventional receiver and 2.4 Mb/s for the 3GPP-trained neural receiver. These results demonstrate the feasibility of integrating neural reception into the 5G NR physical layer and show its potential for AI-RAN deployments.

0.35

xCHEM: SDR-Based Multi-Link Channel Emulator for Real-Time Hardware-in-the-Loop Digital-Twin

eess.SP ·2026-10-28 ·Ali Saeizadeh, Gabriele Gemmi, Tamerlan Aghayev, Michele Polese, Pedram Johari +1 more
similarity 0.59
Abstract · 13 pages, 16 figures, 4 tables

This paper presents xCHEM, a radio-frequency channel emulator that inserts programmable channels between physical radios using a single NI USRP X4xx software-defined radio. External channel models stream impulse responses to its field-programmable gate array without firmware changes or interruption of signal processing. A streaming datapath implements six independently configurable directional channels across four radio interfaces. Each channel uses a sparse finite impulse response filter whose memory-backed delays decouple delay span from multiplier resources. The real and complex variants support 32 and 16 nonzero taps, respectively, with a maximum delay of 16666.62 ns and 4.069 ns resolution. Coefficient scaling and arithmetic right shifts control attenuation. Hardware measurements show root-mean-square errors of 9.5 ps in delay over the full span and 0.11 dB in attenuation. Multipath delays are recovered within one sample. An FPGA coefficient engine produces tested Doppler shifts from +/-1 Hz to +/-1 MHz with mean frequency errors below 0.032 Hz relative to quantized commands after carrier-offset calibration; at 200 Hz, it reduces the measured near-carrier spur by 53.3 dB compared with 1 kHz host updates.

0.39

Efficient and Accurate Surrogate-Assisted Electromagnetic Parameter Calibration for 6G Digital Twin Channels

eess.SP ·2026-08-13 ·Xiaofan Zou, Pan Tang, Peijie Liu, Changyou Tai
similarity 0.56
Abstract

High-fidelity ray-tracing (RT) channel reconstruction is a fundamental step toward building digital twins for the era of 6G wireless communications. However, precise calibration of complex electromagnetic material parameters remains a dual challenge characterized by massive computational overhead and strict accuracy requirements. To overcome this bottleneck, we propose a Surrogate-assisted Grey Wolf Optimizer with Individual Memory (SGWO-IM) algorithm that simultaneously improves computational efficiency and calibration accuracy. In terms of computational efficiency, an online surrogate model is seamlessly embedded into the evaluation workflow for candidate pre-screening, substantially reducing the reliance on highly time-consuming real RT simulations. Regarding calibration accuracy, adaptive convergence and individual memory strategies are incorporated to optimize the global parameter search path, effectively enhancing the consistency between the reconstructed channel and measured data. Validated against measured channel data from a high-density urban scenario, the proposed algorithm requires only 225 real RT simulation calls compared to the 600 calls needed by the standard Grey Wolf Optimizer (GWO), cutting computational overhead by 62.5%. Concurrently, the final Root Mean Square Error (RMSE) is substantially reduced from the 3.65 dB of GWO to 2.97 dB. The results demonstrate that the SGWO-IM algorithm achieves significant advancements in both efficiency and precision, providing a solution that effectively balances efficiency and accuracy for electromagnetic environment reconstruction.

0.04

Energy-Driven Evaluation of Network Digital Twinning Applied to mmWave Beam Management

cs.NI ·2026-09-28 ·João Borges, Bruno Castro, Kleber Cardoso, Andrey Silva, Aldebaro Klautau
similarity 0.55
Abstract

Network Digital Twins (NDTs) are important enablers of 6G and future networks. However, there is a lack of studies regarding practical aspects, such as the impact of simultaneously changing twinning rate, fidelity, and other NDT operational parameters. For instance, works often consider the impact of operational parameters in isolation or with physical twin (PTwin) implementations relying on simulations. Therefore, the main contribution of this work is to provide an in-depth study on the performance impacts of both twinning rate and fidelity, using PTwins that rely on measurements obtained from hardware. We also investigate the optimization of these two operational parameters to minimize energy consumption, exploring a Bayesian Optimization (BO) method and what-if analysis. In this work, the NDT models an indoor propagation environment to optimize beam management. The virtual twin (VTwin) was implemented with the Sionna ray tracing (RT) simulator and the PTwin with our in-house setup composed of customized Wi-Fi radios with 32 antenna elements operating at 60 GHz. The study reveals important aspects of wireless channel NDTs, suggesting that fidelity levels vary throughout the experiment and with the what-if difficulty. Moreover, the twinning rate can be adjusted using sample-efficient methods, such as BO, even at lower fidelity levels.

0.29

Beaver: Elastic GPU Sharing between ML and Latency-Critical vRAN Workloads

cs.DC cs.NI ·2026-10-01 ·Yuncheng Yao, Zhenzhou Qi, Junyao Zheng, Chung-Hsuan Tung, Danyang Zhuo +1 more
similarity 0.55
Abstract · 16 pages, 16 figures

Within the shared industry vision of AI-RAN, AI-and-RAN seeks to co-locate virtualized radio access network (vRAN) workloads and AI services on shared GPUs. This sharing is inherently asymmetric: vRAN workload is latency-critical, whereas the machine learning (ML) workload is a throughput-oriented, best-effort co-tenant. We present Beaver, a GPU sharing system that jointly manages compute and memory resources while protecting the vRAN's strict processing deadline. Beaver sizes the vRAN's streaming multiprocessor (SM) allocation from each slot's scheduled workload, repartitions SM allocations at slot granularity, and rewrites compiled ML kernels to yield HBM bandwidth during the vRAN's memory-critical phases. We implement Beaver and evaluate it using NVIDIA Aerial with heterogeneous multi-cell workloads, real-world cellular traces, production inference kernels, and full-stack LLM serving. On an H200 GPU, Beaver keeps the vRAN's p99.9 latency within its 1.5ms uplink deadline while retaining 74% of Llama-3.3-70B serving throughput. It also incurs no observed deadline misses under replayed cellular traces, protects a 375us downlink deadline, and generalizes to other GPUs including A100, GB10 and GH200.

0.43

An FPGA-in-the-Loop Testbed for MU-MIMO OFDM Beamforming over Ray-Traced Wireless Channels

cs.NI ·2026-09-06 ·Drew Schlesener, Tolunay Seyfi, Fatemeh Afghah
similarity 0.54
Abstract

Wireless networks face ever expanding throughput demands from heterogeneous, high-density user populations, requiring beamforming algorithms that adapt to channel conditions with low latency. Validating such algorithms requires either costly over-the-air testbeds or simulation environments that lack the timing and resource constraints of real hardware, leaving a gap between algorithm design and hardware-realizable deployment. This work presents a frame-based hardware-in-the-loop (HIL) testbed that closes that gap by coupling an FPGA-based implementation of OFDM Waveforms with MU-MIMO beamforming to NVIDIA Sionna's ray-tracing channel simulator, enabling a physical base-station architecture to transmit and receive against a Sionna-rendered digital-twin propagation environment. Unlike prior work that validates beamforming algorithms either purely in simulation or on full RF testbeds, this architecture allows beamforming logic running on actual FPGA fabric to be evaluated under realistic, controllable, and repeatable channel conditions, including UE mobility and site-specific multi-path, without requiring an anechoic chamber or live RF front end. We detail the FPGA OFDM transmit/receive pipeline, the synchronization and data interface between the FPGA and the Sionna environment, and validation of signal quality under AWGN and ray-traced channel conditions, establishing this testbed as a platform for hardware-validated beamforming research.

0.26

TiamiTwin: A Digital Twin for Bistatic ISAC Drone Sensing, Validated Against Measurements

eess.SP cs.NI ·2026-09-19 ·Mehdi Zafari, Saeede Enayati, A. Lee Swindlehurst, Amitav Mukherjee
similarity 0.54
Abstract · Accepted for presentation at the IEEE MILCOM 2026 Workshop on Integrated Sensing and Communication for Critical Infrastructure Protection (I…

Monitoring lower airspace over critical infrastructure using cellular signals of opportunity is highly practical because transmitters are pre-deployed, licensed, and continuously active. Digital twins can evaluate the feasibility of such integrated sensing and communication (ISAC) architectures, but their predictive accuracy must be validated against real-world data. This paper reports validation results for TiamiTwin, a digital twin developed for bistatic ISAC drone sensing, using empirical measurements from an operational 5G deployment featuring a commercial band n41 gNB and a receiver separated by 572.8 m over a non-line-of-sight (NLOS) channel. TiamiTwin incorporates three parallel channel representations evaluated on a 240-subcarrier grid: the 3GPP TR 38.901 (Release 19) bistatic ISAC model, a ray-traced site model, and the captured field measurements. Empirical results demonstrate that both statistical and ray-tracing models under-predict the measured root-mean-square (RMS) delay spread by approximately a factor of three. Furthermore, target reflections sit 68 dB below static clutter in power, making target detection entirely dependent on Doppler separation to isolate the drone from zero-Doppler background returns. Despite this severe clutter environment, the target remains separable along 88% of the flight path in the delay, Doppler, or joint delay-Doppler domains.

0.19