CS Paper Radar

An FPGA-in-the-Loop Testbed for MU-MIMO OFDM Beamforming over Ray-Traced Wireless Channels

Drew Schlesener, Tolunay Seyfi, Fatemeh Afghah

cs.NI ·submitted 2026-09-06 20:08 UTC · v2

Abstract

Wireless networks face ever expanding throughput demands from heterogeneous, high-density user populations, requiring beamforming algorithms that adapt to channel conditions with low latency. Validating such algorithms requires either costly over-the-air testbeds or simulation environments that lack the timing and resource constraints of real hardware, leaving a gap between algorithm design and hardware-realizable deployment. This work presents a frame-based hardware-in-the-loop (HIL) testbed that closes that gap by coupling an FPGA-based implementation of OFDM Waveforms with MU-MIMO beamforming to NVIDIA Sionna's ray-tracing channel simulator, enabling a physical base-station architecture to transmit and receive against a Sionna-rendered digital-twin propagation environment. Unlike prior work that validates beamforming algorithms either purely in simulation or on full RF testbeds, this architecture allows beamforming logic running on actual FPGA fabric to be evaluated under realistic, controllable, and repeatable channel conditions, including UE mobility and site-specific multi-path, without requiring an anechoic chamber or live RF front end. We detail the FPGA OFDM transmit/receive pipeline, the synchronization and data interface between the FPGA and the Sionna environment, and validation of signal quality under AWGN and ray-traced channel conditions, establishing this testbed as a platform for hardware-validated beamforming research.

Closest papers

Nearest neighbours by meaning across the whole index.

A Ray-Traced Digital Twin for 5G NR Positioning with OpenAirInterface

cs.IT ·2026-10-09 ·Nima Chaharbaghi, Florian Kaltenberger, Bartosz Podrygajlo, Rakesh Mundlamuri, Roberto Verdone
similarity 0.57
Abstract · submitted at 22nd Wireless On-demand Network systems and Services Conference

Evaluating 5G positioning on a physical testbed ties every measurement to one propagation environment and one antenna layout, so any question about an alternative deployment requires a new field campaign. We present a ray-traced digital twin of the GEO-5G testbed at EURECOM that drives an unmodified OpenAirInterface (OAI) 5G stack with per-antenna channels computed by Sionna-RT over a 3D model of the site. The distributed gNB antennas are modelled as independent radio devices rather than as elements of a compact array, which preserves the per-antenna absolute delays on which time-difference-of-arrival (TDoA) positioning depends. With them preserved, the twin drives OAI's SRS-based UL-TDoA pipeline to metre-level accuracy consistent with that reported for the physical deployment. We then use the twin to answer a question the physical testbed cannot. Widening the carrier truncates the tail of the horizontal error distribution without improving a typical position, and leaves the vertical error untouched, because the latter is limited by the array geometry rather than by the measurement. That limit is predictable from the antenna coordinates alone, and a height-diverse layout reduces the RMS height error by a factor of four.

0.20

VR-Net: Subarray-Level Inter-Cell Coordination for Multi-Cell XL-MIMO under Near-Field Spatial Non-Stationarity

cs.IT eess.SPmath.ST ·2026-11-11 ·Muhammad Shoaib Ayub, Rana Muhammad Subhan, Insoo Koo, Felipe Augusto Pereira de Figueiredo
similarity 0.55
Abstract

Spatial non-stationarity in multi-cell extremely large-scale MIMO (XL-MIMO) confines each user to a visibility region (VR) of each array. VR-Net exploits these regions for subarray-level coordinated beamforming. A base-station (BS)-indexed conflict graph identifies overlapping VRs; gain-based association and a masked multi-cell weighted minimum mean square error (WMMSE) iteration restrict beam design and channel state information (CSI) uploads to the relevant subarray blocks. We establish conditions for exact per-cell decoupling, derive the expected CSI loads, bound the loss of designing on the VR-gated channel and the loss of the support constraint, and characterize single-edge visibility contrast through a closed-form Fresnel transition width. Simulations use a 3GPP TR 38.901 Release-19-based near-field UMi channel with modular facade arrays and pre-registered criteria. At a 30 dB threshold, VR-Net retains at least 99.6% of the full-aperture WMMSE sum rate in every tested setting while uploading 10-39% fewer complex CSI entries. It gains up to 3.5 bit/s/Hz over an all-user adaptation of the multi-cell scheme of Pérez-Adán et al. at moderate power and dense load, and inter-cell coordination adds up to 33% over per-cell design.

0.31

Blind and Asynchronous Initial Beam Acquisition and Clock-Assisted Re-Acquisition in Standalone Mobile MIMO-OFDM Systems

eess.SP ·2026-10-09 ·Ali Abdi, Firooz B. Saghezchi, Haris Gacanin
similarity 0.55
Abstract

Building upon our preliminary study, this paper proposes a standalone beam-management framework for mobile MIMO-OFDM systems that integrates Blind Initial Beam Acquisition (BIBA) with Clock-Assisted Re-Acquisition (CARA). BIBA is a blind and asynchronous protocol that requires neither prior synchronization nor an out-of-band feedback channel, so the Base Station (BS) and User Equipment (UE) can independently identify the beam pair maximizing received signal strength. To handle subsequent link drops, the newly introduced CARA protocol exploits the clock synchronization established after BIBA to reduce the re-acquisition time by approximately 55% compared with BIBA. The operational reliability of both protocols is bounded by a probabilistic feasibility analysis under random UE mobility trajectories. Protocols are validated on a 28 GHz mmWave testbed under practical hardware constraints, including beam-switching and Time Division Duplex (TDD) latencies, and measured Software-Defined Radio (SDR) software processing delays. Finally, we formulate a unified Finite State Machine (FSM) model for both BIBA and CARA to ensure robust integration into practical wireless systems

0.24

Exploiting Beam Squint for Near-Field Wideband Beamforming in Multi-User OFDMA Systems

eess.SP ·2026-10-17 ·Lanqing Zhi, Peilan Wang, Jun Fang
similarity 0.54
Abstract · 7 pages, 4 figures

The beam squint effect has traditionally been viewed as detrimental to near-field wideband beamforming due to the reduction of beamforming gain towards the desired direction. In this paper, we show that it can instead be harnessed as a benefit in a hardware-constrained orthogonal frequency division multiple access (OFDMA) system, where the system, equipped with a single radio-frequency (RF) chain, aims to serve multiple spatially distributed users by allocating different subcarriers to different users. By exploiting the beam squint effect, flexible frequency-dependent beamfocusing patterns are realized via parallel true-time-delay (TTD) units, enabling nearly full beamforming gain across users. In particular, we formulate a max-min rate optimization problem that jointly designs the time delays, subcarrier-user association, analog beamforming, and power allocation. To tackle the resulting nonconvex mixed-integer problem, a two-stage optimization framework is proposed. In Stage~I, subcarrier-user association and structured analog beamforming are jointly optimized. In Stage~II, power allocation is obtained via bisection search and inverse water-filling. Simulation results demonstrate that the proposed method can achieve a significant improvement by utilizing beam squint to serve multiple spatially distributed users in OFDMA systems.

0.24

An Open-Source Hybrid Ray-Tracing and 3GPP Channel Simulator for Non-Terrestrial Network

eess.SY ·2026-10-27 ·Yu-Chien Lin, Cheng-Yi Chang, Yen-Cheng Lai, Ming-Chun Lee, Ta-Sung Lee
code/data similarity 0.54
Abstract

This paper proposes a hybrid channel simulation framework that combines site-specific ray tracing (RT) with 3GPP-compliant statistical channel simulation for non-terrestrial networks (NTNs). The proposed approach uses RT to generate dominant propagation paths and augments them with statistically generated paths and subpaths to provide richer multipath realizations under practical simulation complexity. To provide a complete simulation framework, we integrate Sionna RT, 3GPP, and hybrid RT-3GPP simulators within a unified workflow. Simulation results based on key channel statistics and power delay profiles show that the proposed method preserves site-specific propagation characteristics while providing sufficiently rich multipath components, thereby addressing the complementary limitations of conventional RT-based and purely statistical NTN channel simulators. The developed simulator is also released as an open-source project to support reproducibility and further NTN research.

0.33

MIRAGE: A GPU-Accelerated IQ-Level Channel Emulator for Real-Time Wireless Digital Twins

cs.NI eess.SP ·2026-10-28 ·Ali Saeizadeh, Angelo Feraudo, Avaneeth Anil, Leonardo Bonati, Pedram Johari +1 more
similarity 0.54
Abstract · 14 pages, 12 figures, 3 tables

Wireless digital twins enable network policies to be evaluated before deployment, but reproducing channel effects within a running protocol stack requires continuous waveform processing under strict timing constraints. We present MIRAGE, a GPU-accelerated channel emulator that applies propagation effects directly to in-phase and quadrature samples exchanged by software 5G New Radio stacks. MIRAGE combines batched multiuser, multiantenna filtering with timestamped shared-memory transport and radio-driver integrations for OpenAirInterface and OCUDU. External propagation models supply channel responses asynchronously, while versioned buffers ensure consistent coefficients within each processing interval. Experiments on one NVIDIA H100 GPU evaluate waveform accuracy, processing time, channel updates, and full-stack traffic delivery. At 61.44 million samples per second, eight single-antenna links, four two-by-two links, and one four-by-four link meet the tested 0.5 ms bidirectional processing criterion. Waveform errors remain within one integer quantization step per component, with no mixed coefficient versions across 16.7 million analyzed slots. Integration with the X5G testbed enables slice resource allocations to be evaluated before deployment. Both evaluated slices ultimately satisfy their throughput caps, requiring one physical reconfiguration under line-of-sight conditions and four under non-line-of-sight conditions. These results demonstrate full-stack policy evaluation and expose prediction errors affecting transfer to a physical network.

0.37

Digital Twin-Aided Prescreening for User Scheduling in MU-MIMO Downlink Systems

eess.SP ·2026-08-11 ·Namhyun Kim, Mahmoud Saad Abouamer, Jeonghun Park, Petar Popovski, Ahmed Alkhateeb
similarity 0.54
Abstract · 13 pages, 8 figures

In dense deployments, massive multi-user multiple-input multiple-output (MU-MIMO) base stations can acquire instantaneous channel state information (CSI) for only a limited subset of users per scheduling interval, restricting multiuser diversity. We therefore propose Digital Twin User pre-Screening (DiTUS), a digital-twin (DT)-aided framework that identifies promising users before instantaneous CSI acquisition. DiTUS forms spatial covariances from DT-inferred departure angles and path powers. Optional Gaussian-process (GP) calibration mitigates path-power bias, while the dominant rank-r eigenspace of the aggregate covariance yields common reference beams. It prescreens the pool using DiTUS-P, a low-complexity projection-energy rule, or DiTUS-L, a greedy log-determinant rule that promotes spatial compatibility. A two-level protocol collects scalar beam reports from shortlisted users and requests r-dimensional effective-channel vectors only from the scheduled set. The framework also supports proportional-fair scheduling. At 15 dB under DT imperfections, simulations with 128 candidates, a 64-user effective-CSI acquisition budget, and a 64-user shortlist show that DiTUS-L achieves 35.06 +/- 0.49 bps/Hz versus 30.28 +/- 0.60 bps/Hz for semi-orthogonal user selection (SUS) with full-dimensional CSI from 64 users, demonstrating that DT-based prescreening preserves substantial multiuser-diversity gains by identifying strong, spatially compatible users before acquiring effective-channel vectors.

0.10

LLM Agent-Based Design of RISC-V CPUs with FPGA-in-the-Loop Evaluation

cs.AR cs.AI ·2026-10-29 ·Leo Itoh, Junichiro Kadomoto
code/data similarity 0.53
Abstract · 5 pages, 6 figures, 2 tables. Submitted to IEEE ISCAS 2027. Code and data: https://github.com/kadomoto-lab/llm-cpu-fpga-loop

Long-run RTL simulation of CPU candidates can take hours, while short diagnostic runs may miss performance degradation that emerges later in execution. This evaluation cost can delay design decisions in LLM-agent-based CPU development. We present a development environment in which LLM agents implement CPU candidates on an FPGA and use on-board performance measurements to guide design decisions. We applied it to the human-supervised development of a single-cycle RV32I core into a three-wide out-of-order RV32IM core. The final design reaches 5.61 CoreMark/MHz at 130 MHz on a Artix-7 FPGA. For the same CPU candidate running 8,000 CoreMark iterations, FPGA evaluation, including implementation, was 9.6x faster than single-threaded RTL simulation. In one case, board measurements revealed long-run performance degradation in a candidate that improved in a short diagnostic run. The result guided candidate selection and led to RTL-based root-cause analysis and a fix.

0.37