CS Paper Radar

Blind and Asynchronous Initial Beam Acquisition and Clock-Assisted Re-Acquisition in Standalone Mobile MIMO-OFDM Systems

Ali Abdi, Firooz B. Saghezchi, Haris Gacanin

eess.SP ·submitted 2026-10-09 11:35 UTC · v1

Abstract

Building upon our preliminary study, this paper proposes a standalone beam-management framework for mobile MIMO-OFDM systems that integrates Blind Initial Beam Acquisition (BIBA) with Clock-Assisted Re-Acquisition (CARA). BIBA is a blind and asynchronous protocol that requires neither prior synchronization nor an out-of-band feedback channel, so the Base Station (BS) and User Equipment (UE) can independently identify the beam pair maximizing received signal strength. To handle subsequent link drops, the newly introduced CARA protocol exploits the clock synchronization established after BIBA to reduce the re-acquisition time by approximately 55% compared with BIBA. The operational reliability of both protocols is bounded by a probabilistic feasibility analysis under random UE mobility trajectories. Protocols are validated on a 28 GHz mmWave testbed under practical hardware constraints, including beam-switching and Time Division Duplex (TDD) latencies, and measured Software-Defined Radio (SDR) software processing delays. Finally, we formulate a unified Finite State Machine (FSM) model for both BIBA and CARA to ensure robust integration into practical wireless systems

Closest papers

Nearest neighbours by meaning across the whole index.

UE-Side Location Privacy for 5G NR Uplink Positioning: Mechanisms and Trade-offs

eess.SP ·2026-09-22 ·Giulia Focarelli, Alireza Pourafzal, Henk Wymeersch, Stefania Bartoletti
published similarity 0.55
Abstract · 6 pages, 4 figures, 1 table. Accepted for publication at the 2026 IEEE 1st Annual Integrated Sensing and Communication Conference (ISAC)

Future 5G-Advanced and 6G networks increasingly reuse uplink communication waveforms for positioning and sensing. This raises privacy concerns, as user equipments (UEs) may unintentionally reveal precise timing information even when positioning services are not explicitly requested. While prior works show generic orthogonal frequency division multiplexing (OFDM) pilots can be manipulated to degrade time-of-arrival (ToA) estimation without compromising data links, this paper extends these concepts to a realistic 5G new radio (NR) up-link framework including Sounding Reference Signal (SRS), Demodulation Reference Signal (DMRS), Physical Uplink Shared Channel (PUSCH), and standardized 3GPP channel models. We investigate several UE-side privacy mechanisms: optimized pilot distortion, artificial noise, artificial multipath, and delay spoofing. Through 3GPP-compliant sample-level simulations, we assess their impact via localization, communication, and consistency-based detection metrics. The resulting analysis highlights the trade-offs among privacy, communication reliability, and detectability, providing key insights into waveform-level obfuscation for future integrated sensing and communication (ISAC) systems.

0.26

An FPGA-in-the-Loop Testbed for MU-MIMO OFDM Beamforming over Ray-Traced Wireless Channels

cs.NI ·2026-09-06 ·Drew Schlesener, Tolunay Seyfi, Fatemeh Afghah
similarity 0.55
Abstract

Wireless networks face ever expanding throughput demands from heterogeneous, high-density user populations, requiring beamforming algorithms that adapt to channel conditions with low latency. Validating such algorithms requires either costly over-the-air testbeds or simulation environments that lack the timing and resource constraints of real hardware, leaving a gap between algorithm design and hardware-realizable deployment. This work presents a frame-based hardware-in-the-loop (HIL) testbed that closes that gap by coupling an FPGA-based implementation of OFDM Waveforms with MU-MIMO beamforming to NVIDIA Sionna's ray-tracing channel simulator, enabling a physical base-station architecture to transmit and receive against a Sionna-rendered digital-twin propagation environment. Unlike prior work that validates beamforming algorithms either purely in simulation or on full RF testbeds, this architecture allows beamforming logic running on actual FPGA fabric to be evaluated under realistic, controllable, and repeatable channel conditions, including UE mobility and site-specific multi-path, without requiring an anechoic chamber or live RF front end. We detail the FPGA OFDM transmit/receive pipeline, the synchronization and data interface between the FPGA and the Sionna environment, and validation of signal quality under AWGN and ray-traced channel conditions, establishing this testbed as a platform for hardware-validated beamforming research.

0.26

Timing Misalignment and Its Impact on OTFS and Other Delay-Based Waveforms

eess.SP ·2026-10-13 ·Badr Eddine Ouakouak, Salah Eddine Zegrar, Hüseyin Arslan
top venuebenchmarkhot direction similarity 0.54
Abstract · Published in: IEEE Transactions on Communications. Date of Publication: 01 September 2026. Volume: 74. Page(s): 13657 - 13671. no ISSUE numb…

The shift towards 6G wireless networks calls for advanced waveforms to support emerging applications such as ultra-reliable and massive machine-type communications. Among the proposed candidates, OTFS, ODDM, OTSM, and OCDM share the common feature of exploiting the delay domain for data transmission. While these waveforms offer significant advantages in high-mobility and sensing scenarios, their integration into multi-user uplink systems reveals a critical challenge: timing misalignment (TM). Unlike OFDM, where residual timing offsets translate into phase rotations, delay-based waveforms experience actual shifts of resources, whose impact we investigate in this work. We show that the aforementioned waveforms can be unified under a time-invariant setup through a common input--output relation, which enables a unified analysis of TM in uplink resource allocation. The results reveal a fundamental trade-off between interference mitigation and guard overhead in the presence of TM. We further benchmark the observed behavior against OFDM under Doppler spread as a reference impairment and highlight the analogy between TM in delay-based allocation and Doppler spread in frequency-based allocation. The results show that delay-based waveforms can maintain a net performance advantage over OFDM in the considered setup. Beyond this unified Doppler-free analysis, we evaluate the joint impact of Doppler spread and TM on each waveform individually. We also investigate BER performance and show how coding can mitigate the resulting interference. This study therefore establishes a problem framework that motivates the development of future compensation and scheduling strategies for practical multi-user operation of delay-based waveforms.

0.44

Toward Reliable and Accurate Predictive ISAC in Mobile mmWave Networks

eess.SP ·2026-09-24 ·Atefeh Rezaei, Vahid Jamali, Falko Dressler
similarity 0.53
Abstract

Integrated sensing and communications (ISAC) systems offer a promising framework for beam tracking, which enhances channel awareness and improves communication reliability in mobile millimeter wave (mmWave) networks. Motivated by this, we propose a low-complexity, model-driven channel state information (CSI) framework with integrated channel prediction capability in ISAC-enabled systems. To reduce the overhead of CSI acquisition and uplink feedback, the proposed framework leverages predicted target sensing parameters to construct partial CSI from both line-of-sight (LoS) and detected non-line-of-sight (NLoS) components. Exploiting this partial CSI, we formulate a beamforming optimization problem that minimizes the worst targets' Cramér-Rao bound (CRB) under per-user communication constraints. This problem is non-convex and highly non-linear; therefore, we develop an efficient suboptimal solution using successive convex approximation (SCA) and Schur-complement-based decomposition techniques, and we evaluate its complexity in comparison with other approaches. Moreover, since obtaining the absolute phase of the channel paths may require additional pilot resources, we formulate a robust beamforming design that does not assume this knowledge, and propose a solution based on sample averaging. Numerical results demonstrate that the ISAC-based robust channel prediction and localization framework significantly improves prediction accuracy and link reliability compared with conventional schemes, such as communication-based localization and tracking and separated sensing and communication. These results highlight the potential of ISAC for reliable, adaptive, and high-frequency, blockage-prone wireless networks. Furthermore, the performance of the proposed framework is evaluated under severe blockage scenarios, which further demonstrates enhanced network reliability.

0.16

Decomposing URLLC Deadline Failures in Beam-Managed 6G Networks: Implications for Mission-Critical Wireless Systems

cs.IT ·2026-10-14 ·Webert Montlouis, Sneihil Gopal
similarity 0.53
Abstract

Mission-critical wireless systems require ultra-reliable low-latency communications (URLLC), which sixth-generation (6G) millimeter-wave (mmWave) beam-managed networks are designed to provide. However, the reported URLLC deadline miss rate often masks the specific causes of packet failures. This paper introduces a framework that categorizes missed URLLC packets into three causes: queueing-limited (Q), transmission-limited (T), and beam-tracking-limited (B). Our analysis across ten scenarios with antenna counts from $\mathbf{64}$ to $\mathbf{4096}$ reveals three key findings. First, the dominant cause of missed packets shifts from Q to B when the antenna count exceeds roughly $\mathbf{1825}$. Therefore, operators of hyper-massive arrays should focus on improving beam-tracking accuracy to reduce the miss rate. Second, the beam-sweep period ($T_{\mathrm{sw}}$) significantly affects B-misses, while Q and T remain relatively unchanged. Reducing $T_{\mathrm{sw}}$ from $\mathbf{20}$ms to $\mathbf{10}$ms can cut the B-misses by more than half, without requiring a redesign of the scheduler. Third, Q-misses reach a cumulative distribution function (CDF) of approximately $\mathbf{0.98}$ by $\mathbf{0.8}\,$ms, so modest latency-budget relaxation can accommodate most overruns. In contrast, B-misses remain unsaturated at $\mathbf{12}\,$ms, making them difficult to accommodate within practical application-layer latency limits. Overall, this framework transforms an ambiguous aggregate miss-rate metric into a clear three-way diagnostic tool that directly informs remedial actions for network operators.

0.26

Impact of Synchronization Offsets and CSI Feedback Delays on Coherent Joint Transmission in Distributed MIMO-OFDM

eess.SP ·2026-10-23 ·Kumar Sai Bondada, Daniel J. Jakubisin, R. Michael Buehrer
similarity 0.53
Abstract

This paper studies the impact of synchronization offsets and CSI feedback delay on coherent joint transmission (CJT) in distributed MIMO-OFDM systems. Unlike conventional co-located MIMO, distributed CJT is highly sensitive to transmitter-dependent synchronization impairments because coherent combining requires phase, frequency, and timing alignment across geographically separated transmitters. Received signal models are derived for residual timing offsets, carrier frequency offsets (CFOs), sampling clock offsets (SCOs), phase noise, and channel variations accumulated during channel state information (CSI) feedback delay. The corresponding spectral efficiency (SE) expressions quantify the degradation in capacity due to loss in coherent-combining gain caused by residual phase rotations, inter-carrier interference (ICI), and precoder misalignment. The SE expressions are numerically evaluated to determine synchronization requirements for maintaining negligible SE degradation, yielding the following findings: a Gaussian-distributed start-time jitter with a standard deviation below 10\% of the sampling period results in negligible SE degradation, with the SE loss decreasing from 0.68\% at an SNR of 0 dB to 0.17\% at 40 dB. A normalized CFO standard deviation of 0.001 also results in negligible ICI-induced degradation, with the SE loss increasing from 0.05\% at an SNR of 0 dB to 2\% at 40 dB. At an SNR of 26 dB, limiting the SE loss to 5\% yields feasible operating points with clock-error standard deviations up to 50 ppb, Doppler-delay products up to 0.1, and phase-tracking error standard deviations up to $40^{\circ}$ at carrier frequency of 3.5 GHz with 30 kHz sub-carrier spacing with 15.36 MHz sampling rate.

0.23

Controlled Radio Fault Injection and Telemetry Evaluation for Open 5G RANs

cs.NI eess.SY ·2026-10-22 ·Babak Azkaei, Maxim Bîtiu, Georgios Exarchakos, Kishor Chandra Joshi
published similarity 0.53
Abstract

Radio access network (RAN) telemetry reveals radio conditions, protocol behavior, and their consequences for applications. Evaluating its usefulness requires controlled impairments and observations of the same execution. We present C and Python channel brokers and a fault injection workflow for software 5G testbeds connecting an OCUDU base station and a software UE through ZeroMQ. The brokers apply scheduled, directional transformations to I/Q samples and restore the link, while the workflow jointly records applied faults, native and programmable (codelet) telemetry, and application delay. We demonstrate this capability through 45 comparative trials of brief uplink interruptions and stepped additive noise. These use cases distinguish recognizing a radio change from measuring its service consequence: native missing-feedback events retrospectively identify interruptions, whereas noise changes decoding-error measurements without producing those events. Median on-time round-trip times remain near 30 ms, but the prespecified comparisons show mean increases in on-time 95th-percentile delay of 354 and 604 ms for one and five interruptions, and 113 ms for noise. Adding receive-side radio link control (RLC) codelet summaries did not improve interruption classification on held-out trials. The framework provides a reusable way to evaluate measurement choices under known radio faults, before using them in monitoring or learning systems.

0.31

Robust Beamforming and Power Allocation for Coherent Cell-Free Massive MIMO with Residual Calibration Errors

eess.SP ·2026-08-11 ·Mingjun Sun, Xidong Mu, Shaochuan Wu, Chongjun Ouyang, Hyundong Shin
similarity 0.52
Abstract

This paper investigates robust downlink transmission to tolerate calibration aging in time-division duplex cell-free massive multiple-input multiple-output (CF-mMIMO) systems with residual calibration errors (RCEs). Unlike existing studies that typically treat RCEs as static impairments, we develop a time-evolving RCE model that characterizes the joint effects of residual phase mismatches, residual carrier frequency offsets, and oscillator phase noise. Based on this model, two practical processing architectures are considered: instantaneous calibrated-channel-based robust beamforming (BF) and statistical beamformed-channel-based robust power allocation (PA). For both architectures, tractable achievable rate lower bounds are derived, which explicitly reveal the impact of calibration aging on coherent combining, BF-gain uncertainty, and inter-user interference. Using these lower bounds as design metrics, we formulate an effective weighted sum-rate (EWSR) maximization problem over the data transmission interval, so that the resulting BF and PA designs can account for the temporal evolution of RCEs rather than a single calibrated instant. To efficiently solve the resulting problems, a Gauss--Legendre quadrature-based weighted minimum mean square error (WMMSE) optimization framework is developed, where both robust BF and PA are updated in an access point (AP)-block manner with closed-form solutions under per-AP power constraints. Simulation results demonstrate that: i) the proposed algorithms exhibit stable convergence; ii) the proposed robust BF and PA schemes achieve higher EWSR by explicitly accounting for calibration aging than their non-robust counterparts; and iii) robust BF achieves higher spectral efficiency (SE), whereas robust PA provides a more favorable tradeoff between SE and implementation cost in terms of computational complexity and fronthaul overhead.

0.04