CS Paper Radar

One Photon, Many Worlds: Posteriors and Predictions with Single-Photon Cameras

Haejoon Lee, Mohit Gupta, Vijayakumar Bhagavatula, Aswin C. Sankaranarayanan

eess.IV cs.CV ·submitted 2026-10-02 01:58 UTC · v1

Abstract

Single-photon avalanche diode (SPAD) cameras operate fundamentally differently from conventional cameras due to their photon-counting nature. Each frame produces a binary image: pixels report zero if no photons arrived during exposure, and one if one or more photons arrived. Reconstructing a scene or inferring its properties from a single binary frame is difficult because many different images could produce the same measurement; thus, the inverse problem is fundamentally one-to-many. As we gather more binary measurements, the inherent uncertainty associated with the inverse problem and any associated inference diminishes. With sufficient photon counts, photon noise becomes negligible relative to the signal mean, enabling near-deterministic scene recovery and inference. This work characterizes the transition from stochastic to near-deterministic scene understanding as photon budget increases, analyzing how the stochasticity in photon arrival affects downstream inference tasks. Technically, we develop a conditional generative framework based on a Hypergeometric frame-thinning process for accumulated binary SPAD measurements. Generative models capture the one-to-many nature of photon-starved inverse problems, enabling empirical characterization of how this ambiguity diminishes with increasing measurements and its impact on downstream tasks like character recognition, QR code decoding, and facial analysis.

Comment
18 pages, 18 figures

Closest papers

Nearest neighbours by meaning across the whole index.

High-Flux Count-Free Single-Photon 3D Cameras

cs.CV ·2026-08-18 ·Kaustubh Sadekar, Vivek K Goyal, David Maier, Atul Ingle
published similarity 0.71
Abstract · Presented at IEEE ICCP 2026 (Best Paper Award Winner). To appear in IEEE Transactions on Pattern Analysis and Machine Intelligence (TPAMI)

Single-photon cameras based on single-photon avalanche diode (SPAD) technology are gaining popularity for 3D sensing, thanks to their extreme sensitivity and time resolution. There are two key challenges with single-photon cameras that limit their widespread use: (i) they suffer from non-linear distortions called ''pile-up'' when operated in high-photon-flux conditions, and (ii) they generate a large volume of raw photon data, creating a severe data bottleneck at each sensor pixel. In this work, we show that while compressive capture techniques successfully mitigate data transfer challenges, they exacerbate the effects of dead-time distortion because they fail to retain sufficient information about the photon detection history to allow post-processing pile-up correction via existing methods. We propose a new computational-imaging method that combines free-running capture with an analysis-by-synthesis software pipeline to mitigate pile-up distortions. Our results with hardware emulations and full-scene and single-pixel simulations show that our method can reliably capture scene distance and reflectance over a wide range of illumination conditions. Our work will enable high-resolution SPAD cameras that are severely bandwidth-constrained to operate in real-world high-flux scenarios.

0.41

UnSPAD: Uncertainty-aware Single Photon Burst Photography

cs.CV ·2026-11-13 ·Sachin Shah, Kalyan Bhetwal, Levi Burner, Christopher A. Metzler
published similarity 0.68
Abstract · Accepted at The Winter Conference on Applications of Computer Vision (WACV) 2027

We introduce UnSPAD, an uncertainty-aware burst photography framework capable of fusing and denoising arbitrarily long sequences of binary single photon avalanche diode (SPAD) measurements. Unlike prior methods that require fixed burst lengths or rely on powerful generative priors, UnSPAD combines learned motion estimation with uncertainty-informed measurement fusion and denoising to produce temporally consistent, hallucination-free reconstructions. UnSPAD first forms an initial scene estimate by averaging flow-aligned binary frames. UnSPAD then uses per-pixel uncertainty maps to perform uncertainty-aware denoising; the denoiser is informed about which regions accumulated the fewest observations (and thus contain the most relative shot noise) due to motion, occlusion, or alignment errors. This two-step reconstruction pipeline helps mitigate hallucinations---outside of the structure implicitly introduced by the flow estimates, the initial scenes estimates are entirely prior-free. Experiments on real and simulated SPAD and quantum image sensor (QIS) benchmarks demonstrate state-of-the-art reconstruction quality, improved temporal consistency, and superior color fidelity relative to the state of the art.

0.34

Harnessing SPAD Noise: Test-Time Gated Attention for Indoor Depth Estimation

cs.CV cs.LGcs.ROeess.SP ·2026-10-11 ·Yiquan Gao
code/data similarity 0.67
Abstract

Monocular depth estimation (MDE) has emerged as a cost-effective alternative to hardware-dependent 3D sensing modalities, yet predicting precise metric depth remains a persistent challenge due to intrinsic scale ambiguity, edge bleeding, and limited zero-shot generalization in unseen environments. Recent multi-modal approaches incorporate 1D/3D Single-Photon Avalanche Diode (SPAD) data to resolve these ambiguities, but they mainly treat SPAD noise as a harmful artifact required for denoising or leave the noise ignored. In this paper, we present an essentially different insight: native SPAD noise is an informative prior that implicitly encodes deterministic environmental characteristics. Driven by this paradigm shift, we introduce a novel, lightweight Test-Time Gated Attention framework by Harnessing SPAD Noise, therefore dubbed HSN. Tailored for indoor scenarios, HSN leverages the synergistic combination of 1D SPAD histograms and Gate Adapters (GAs). Through three complementary optimization phases, it generates channel-wise gated attention vectors to dynamically adjust encoder feature maps at inference time, effectively resolving ambiguous scale and boundary challenges without the heavy computational overhead or dense 3D modalities that other TTA methods suffer from. Extensive experiments on challenging real-world indoor benchmarks show that HSN achieves state-of-the-art metric depth accuracy in in-domain settings, while exhibiting even greater potential under zero-shot generalization to unfamiliar environments. Furthermore, interpretability analysis reveals that the proposed gated attention mechanism adaptively shifts attention toward deeper semantic layers under intensifying SPAD noise. Code will be made publicly available.

0.25

Spatiotemporal Flux Probing for Single-Photon Videography

cs.CV ·2026-09-18 ·Jerry Yan, Matteo Forlivesi, Bowen Tan, Andrew Xie, Siddharth Somasundaram +1 more
top venuecode/datahot direction similarity 0.67
Abstract · ECCV 2026, Project page: https://jerukan.github.io/spt-flux-probing

We address the problem of recovering high-speed videos from dynamic scenes under extreme photon sparsity. Existing methods rely on aggregating photon detections in local spatiotemporal windows to improve signal-to-noise ratio; however, this local grouping discards global structure and fails in low-light regimes where photon detections are sparse in space and time. In this work, we show that the information needed to recover both motion and illumination is encoded in correlations over the full space-time pattern of photon arrivals. Building on this insight, we develop a spatiotemporal flux probing theory and an algorithm that estimates the Fourier coefficients of the underlying intensity directly from the photon stream. We demonstrate that our approach (1) recovers fast motion and temporal illumination dynamics with substantially fewer photons than prior methods, (2) enables velocity-selective videography that automatically refocuses video onto specific detected motions, and (3) generalizes across sensing modalities including single-photon, event, and spike cameras.

0.62

Frozen CLIP Priors for Robust Self-Supervised Poisson Inverse Problems

eess.IV cs.CV ·2026-08-20 ·Laura C. Diaz-Delgado, Emmanuel Martinez, Henry Arguello
top venue similarity 0.64
Abstract

Self-supervised learning for imaging inverse problems is increasingly important in photon-limited settings, where acquiring clean ground truth is impractical and reconstruction must remain stable under dataset and acquisition shifts. This challenge is amplified under Poisson noise, whose signal-dependent statistics interact with sampling operators (e.g., CFA mosaicing). Meanwhile, foundation vision encoders trained at web scale offer distortion-invariant, content-related representations that generalize well across domains, suggesting a promising route to build priors that transfer beyond the training distribution without expensive fine-tuning. This paper proposes an ADMM-inspired unrolled plug-and-play solver for Poisson inverse problems that decouples a closed-form data-consistency update from a parameter-efficient prior. The prior is implemented as a lightweight decoder operating on frozen CLIP RN50 dense multi-scale features, adapting foundation representations with less trainable parameters. For self-supervision, the method integrates GR2R measurement-domain re-corruption with an Equivariant Imaging regularizer via virtual acquisitions. Experiments on Poisson CFA demosaicing and deblurring show competitive quality, improved robustness under shifts, and self-supervised performance approaching supervised training.

0.55

D2ToF: One-Step Diffusion for Depth Super-Resolution from Lightweight Single-Photon LiDAR Waveforms

eess.IV cs.CV ·2026-11-13 ·Pallabjyoti Deka, Lewis Wilson, Stephen McLaughlin, Jonathan Leach, Abderrahim Halimi
similarity 0.63
Abstract

Single-photon LiDAR (SPL) sensors offer exceptional temporal resolution and single-photon sensitivity for depth imaging. However, cost-effective SPL arrays typically suffer from extremely low spatial resolutions (e.g. $8\times 8$ pixels), limiting their real-world utility. In this paper, we propose a novel, one-step super-resolution framework, D2ToF, Distilled Diffusion for Time-of-Flight, that bridges the gap between high-fidelity generative modeling and real-time execution. Our approach uses an amortized variational distillation strategy that allows for a measurement-based data consistency term to be incorporated directly into the one-step training objective. This encourages that the synthesized high-resolution depth maps are consistent with the captured low-resolution Time-of-Flight (ToF) histograms. To overcome the severe ill-posedness of upsampling extremely degraded inputs, we introduce a multimodal guidance strategy. By leveraging a foundational monocular depth model to extract structural priors from a high-resolution reflectivity image, our network is guided by a rich triad of the ToF histogram, reflectivity map, and relative depth estimate. Experimental results outperform evaluated baselines, achieving $16\times$ spatial super-resolution (from $8\times 8 \times 100$ histograms to $128\times 128$ depth maps) at an accelerated inference speed of approximately $83$ milliseconds.

0.18

Training Calibrated Conditional Generative Models with a Sample-Only Coverage Loss

cs.LG stat.MEstat.ML ·2026-11-11 ·Benjamin Remy, Raphael Rossellini, Chihway Chang, Rebecca Willett
theory similarity 0.62
Abstract · 32 pages, 7 figures

Conditional generative models have become the tool of choice for sampling posteriors in scientific inverse problems, where we seek to sample images or signals conditioned on a set of indirect and noisy measurements. Yet they are often overconfident, which is a critical failure in scientific applications where accurate uncertainty quantification is essential. Existing regularizers fall short in complementary ways: differentiable coverage objectives require the model's density and do not identify the posterior, while strictly proper scoring rules such as the energy score need only samples but do not directly enforce coverage. We close this gap by introducing a differentiable loss function based on the expected coverage probability, estimated from samples alone. It applies to any conditional generative model, with no need for tractable densities or architectural changes. We prove that it is a strict divergence, vanishing if and only if the model equals the true posterior. On simulation-based inference benchmarks, it matches a density-based coverage loss without evaluating the density. On high-dimensional imaging inverse problems, it yields better-calibrated posteriors than scoring-rule regularizers, with little change in the reconstruction quality of point estimates.

0.28

Quanta Perception as Probabilistic Events

cs.CV cs.AI ·2026-08-27 ·Varun Sundar, Pavan Thodima, Sacha Jungerman, Mohit Gupta
similarity 0.62
Abstract · For project webpage, see https://wisionlab.com/project/probabilistic-events/

Autonomous systems rely on extracting information from light, yet remain brittle in extreme environments, from nighttime navigation to high-speed robotics. Conventional sensors aggregate photons over fixed exposures, imposing trade-offs between sensitivity, dynamic range, and temporal resolution that degrade perception when photons are scarce or dynamics are rapid. Quanta sensors detect individual photons, but their streams exceed real-time compute and latency budgets by orders of magnitude. Here we introduce $\textit{probabilistic events}$, a computational primitive for real-time quanta perception from individual photon detections. By computing the posterior over the time since the last intensity change, we represent photon streams as recursive belief states. Rather than fixed-threshold event-camera triggers, this recursive Bayesian formulation yields three low-latency signals: motion-adaptive scene flux, high-fidelity activity maps, and entropy-based perceptual uncertainty. This representation enables perception in extreme conditions, including pose estimation of a running person at $\sim$0.05 lux---without retraining vision models. Our approach processes input streams exceeding 50{,}000 quanta frames per second on commodity GPU hardware---yielding kilohertz-scale outputs up to four orders of magnitude faster than state-of-the-art quanta reconstruction baselines, even for megapixel arrays. By replacing frame reconstruction with direct probabilistic inference over photon streams, this work bridges photon-counting quanta sensing with robotic vision.

0.32