CS Paper Radar

Label-free physics-informed strength reduction and a neural operator for the reliability of spatially variable slopes

Apisit Robjanghvad, Sompote Youwai

cs.CE ·submitted 2026-10-04 00:20 UTC · v1

Abstract

This paper proposes a label-free physics-informed neural network (PINN) for non-associated Mohr-Coulomb plasticity with incremental strength reduction for the reliability of spatially variable $c$-$φ$ slopes. The PINN is trained with a virtual-work loss on the finite-element mesh and solves many random fields at once on a graphics processing unit. With a solver budget fixed on the homogeneous slopes, it reproduces the Abaqus factor of safety within 2 to 3% root-mean-square on 52 random fields and locates the failure mechanism in the same weak zones, with the plastic strain in the band under-resolved. A neural operator trained only on the PINN solutions predicts the factor of safety, displacement path and failure mode of a million fields in seconds. No finite-element solution enters the pipeline: Monte Carlo fields, importance samples and operator training data come from the PINN, and Abaqus serves only to verify the result. Monte Carlo simulation, the first-order reliability method, importance sampling and the operator give consistent failure probabilities down to $10^{-3}$ for the slope studied, but a 3% scatter in the factor of safety inflates a probability of $10^{-3}$ by up to a factor of two, and the absolute values refer to one mesh. A heterogeneous Bishop analysis gives failure probabilities 2.6 and 8.3 times lower although its critical circles follow the PINN mechanism, because a small difference in the factor of safety is amplified in the tail. The operator also yields the failure mechanism and displacement response conditional on failure.

Closest papers

Nearest neighbours by meaning across the whole index.

Physics-Informed Error Field Learning: A Post-Training Optimization Framework for Physics-Informed Neural Networks

cs.LG ·2026-08-25 ·Jiuyun Sun, Yong Zhang
similarity 0.55
Abstract

Physics-Informed Neural Networks (PINNs) have emerged as an important class of numerical methods for solving partial differential equations (PDEs). However, during the late-stage optimization process, further parameter updates often yield diminishing accuracy improvements while increasing computational costs. To address this issue, this paper proposes a Physics-Informed Error Field Learning (PIEFL) framework for PINNs. Unlike conventional approaches that continuously approximate the solution field using a single network, PIEFL introduces an auxiliary error network after the primary network achieves satisfactory accuracy and shifts the learning objective from the solution field to the error field. By deriving error control equations under physical constraints, the error network learns the discrepancy between the current approximation and the exact solution, and the learned error correction is combined with the primary prediction to improve solution accuracy. The proposed framework avoids continuous optimization of the entire solution space and focuses computational resources on correcting existing prediction errors. Moreover, PIEFL requires no modification to the primary network architecture, making it compatible with existing PINN models and applicable as a general post-training optimization strategy. Numerical experiments on representative PDEs demonstrate that PIEFL achieves higher solution accuracy under the same computational budget, validating its effectiveness in improving the performance of PINNs.

0.19

A Physics-informed Neural Network Approach for Robust Buckling Load Prediction and Reliability-Based Design of Thin Truncated Conical Shells

cs.LG ·2026-08-22 ·Devasmit Dutta, Budhaditya De, Rohan Majumder, Sudip Kumar Mishra
similarity 0.55
Abstract

Thin-walled truncated conical shells are widely used in aerospace, marine, offshore, and lightweight infrastructure systems due to their high strength-to-weight ratio and geometric efficiency. Their buckling resistance under axial compression, however, is highly sensitive to geometric imperfections, manufacturing tolerances, material variability, and nonlinear instability effects. Conventional design procedures rely on conservative knockdown factors (KDFs), such as those recommended in NASA SP-8019, which do not explicitly account for shell geometry, fabrication quality, data uncertainty, or target reliability. This study develops a physics-informed neural network (PiNN) framework for predicting critical buckling loads of thin truncated conical shells and integrates the trained surrogate within a reliability-based design (RBD) formulation. The model combines geometric and material descriptors with mechanics-informed features derived from shell stability theory and the localized reduced stiffness method (LRSM). A physics-informed loss function penalizes mechanically inadmissible predictions exceeding the theoretical elastic buckling load. The framework is trained and evaluated using 133 experimental Mylar conical shell tests under axial compression. Compared with a conventional deep neural network (DNN), the PiNN improves predictive accuracy, reduces mean absolute error, and enhances physical consistency. The trained PiNN is then used to evaluate reliability indices and calibrate safety-consistent KDFs for prescribed target reliability levels. Results demonstrate that the PiNN-RBD framework provides an efficient approach for uncertainty-aware design of imperfection-sensitive shell structures.

0.49

A variational physics-informed graph neural network for heterogeneous solid mechanics

cs.LG math.NA ·2026-09-10 ·Aashay Rajan Yadav, Amiya Prakash Das, Ratna Kumar Annabattula
similarity 0.54
Abstract

Stress localization in heterogeneous solids is governed by the bimaterial interface, where the displacement field remains $C^0$-continuous, while in-plane stresses jump due to the stiffness mismatch. Coordinate-based physics-informed neural networks (PINNs) represent this jump via a prescribed regularization width or a weighted interface penalty, making their accuracy sensitive to how phase-contrast changes are handled. This work presents a variational, label-free physics-informed graph neural network (PI-GNN) in which the heterogeneity is carried by the discretization rather than by the trial field. The solver operates on a conforming adaptive mesh graph, assigns constitutive behavior per element, and minimizes the discrete total potential energy as a single unweighted objective in which only first derivatives appear. The discrete energy on piecewise-linear elements coincides with the finite element (FE) Ritz functional. Dirichlet conditions are enforced by construction, with no penalty term, no interface weight, and no prescribed transition width. Using one fixed architecture, optimizer, and loss across small-strain elasticity and finite-strain Neo-Hookean hyperelasticity in two and three dimensions, the von Mises error remains below $3.58\%$ across a stiffness-contrast sweep spanning $(E_{\mathrm{inc}}/E_{\mathrm{mat}}\in[10^{-2},10^{2}])$, where a strong-form PINN degrades to $5.58\%$, and its displacement error reaches $7.66\%$ against $0.49\%$ for the PI-GNN. A trained network halves the ($σ_{xx}$) error of an energy-based PINN ($5.01\%$ versus $10.94\%$). Training cost exceeds a single FE solve by more than an order of magnitude, so the construction is a variationally consistent, penalty-free interface representation for parametric surrogates and inverse identification rather than a replacement for a one-off FE analysis.

0.28

A mesh-free multiresolution deep energy method with phase-field modeling of brittle fracture

cs.LG math.NA ·2026-08-25 ·Han Zhang, Mehrisadat Makki Alamdari, Babak Shahbodagh, Mohammad Vahab, Cosmin Anitescu +2 more
benchmark similarity 0.54
Abstract

Phase-field modeling of brittle fracture removes the need to track cracks explicitly by recasting their evolution as the minimization of an energy functional. In return it requires a discretization dense enough to resolve a localization band whose width is set by a regularization length and whose path is not known in advance. We propose a mesh-free discretization in which a single neural network represents the displacement and phase fields and is trained by minimizing the incremental energy directly. The coordinates enter the network through a multiresolution feature encoding built from $C^1$ quadratic B-spline grids, so the finest scale the representation can express is set by choice rather than reached through slow training, and the energy is estimated by stratified Monte Carlo integration on points redrawn at every optimizer iteration. This pairing proves critical, since the crack fails to advance both when the integration points are held fixed and when the encoding is too coarse to represent the band, while each ingredient tolerates a wide range of settings once the other is in place. Because the representation is globally $C^1$, the second- and the fourth-order fracture energy densities run on the identical discretization. Across six problems, from single-edge-notched tension and shear to a thick-walled ring on a single spline patch, the computed load-displacement curves follow staggered finite element references at matched regularization length, with peak loads within about 1% on the single-edge-notched tests and within 8% where the crack pattern changes topology. On a public benchmark dataset of random multi-crack configurations the method classifies the active or dormant state of 90% of the seeded cracks in twenty zero-shot runs, where the deep Ritz baseline of the dataset authors fails.

0.51

The importance of tensor handling and implementation of physics-informed DeepONets

cs.LG physics.comp-ph ·2026-10-15 ·Nahum Banks, Gustavo A. M. de Almeida, Sergio Maldonado
similarity 0.53
Abstract

Physics-informed neural networks (PINNs) reduce or eliminate the need for large labelled datasets by enforcing governing equations during training. Physics-informed Deep Operator Networks (PI-DeepONets) extend this approach to learning solution operators, enabling rapid prediction across families of problems. Despite these advantages, we show that their application to higher-dimensional problems remains limited by the computational cost of training. To address this issue, we propose a modified PI-DeepONet architecture that reduces this cost by removing redundancy in how the Branch network processes input functions across collocation points. The proposed formulation is mathematically equivalent to the original architecture but reduces input tensor sizes and the number of Branch network evaluations. We analyse the computational complexity of both architectures and derive theoretical scaling laws for training time with respect to the number of collocation points and input functions. The proposed architecture is evaluated on 1D, 2D, and 3D linear advection problems. In all cases, it achieves comparable predictive accuracy to the original PI-DeepONet while consistently reducing training time. In 2D experiments, a maximum speed-up of $3.75\times$ is observed, with empirical training-time scaling agreeing with the predicted linear dependence on collocation points and input functions. Furthermore, training a 3D model on an NVIDIA A100 GPU is only feasible using the proposed architecture, as the original formulation exceeds memory limits. These results demonstrate that careful consideration of how PI-DeepONets are implemented can yield substantial gains, enhancing the practical performance of PI-DeepONets and enabling their application to otherwise intractable physics-informed learning problems.

0.12

Adaptive Physics-Informed Neural Networks for the Blasius Boundary-Layer Problem

cs.LG physics.flu-dyn ·2026-08-28 ·Mehari Fentahun Endalew, Xiaoming John Zhang
benchmark similarity 0.52
Abstract · 25 pages

Physics-informed neural networks (PINNs) provide a mesh-free approach for solving differential equations, but their performance can depend strongly on loss weighting, collocation placement, and optimization strategy. This study develops an adaptive PINN framework for the Blasius boundary-layer equation using gradient-norm-based adaptive loss weighting, nonuniform and residual-based collocation, and sequential Adam--L-BFGS optimization. In the representative run using the architecture $[1,100,100,1]$, the model predicts $f''(0)=0.3320762918$, compared with the high-accuracy benchmark $0.332057336215$, giving an absolute error of $1.896\times10^{-5}$. The final weighted loss is $6.789\times10^{-8}$, and the predicted stream-function, velocity, and shear profiles agree closely with an independent numerical boundary-value solution. A separate full-training architecture study shows that the two-hidden-layer model achieves the smallest wall-shear error among the four tested architectures, $1.629\times10^{-6}$, whereas the deepest network attains the smallest weighted objective but a substantially larger wall-shear error. Compared with the previously reported PINN value $f''(0)=0.33165$, the representative run reduces the wall-shear error by approximately a factor of $21.5$. The results show that the combined adaptive training framework can achieve high accuracy for the Blasius problem and that weighted loss alone is insufficient for identifying the most physically accurate PINN. Because the adaptive components are applied jointly, their individual contributions cannot be isolated from the present results and would require a controlled ablation study for separate assessment.

0.22

PINNeval: A Comprehensive Evaluation Standard for Physics-Informed Neural Networks

cs.LG cs.AI ·2026-11-05 ·Kevin von Bargen, Hamid Ebrahimy, Tim Römer
top venuebenchmarkcode/data similarity 0.51
Abstract · Accepted at the 40th Conference on Neural Information Processing Systems (NeurIPS 2026), Track on Evaluations and Datasets. 54 pages. Code: …

The Physics-Informed Neural Network (PINN) literature has produced a rapidly expanding catalogue of methods. We divide a PINN training pipeline systematically into four components and observe that many existing benchmarks study these components in isolation. These components are domain-importance adaptation, loss balancing, neural network architecture, and optimization scheme. Moreover, the studies set the surrounding and not considered components of the pipeline to a minimal default that is no longer representative of current best practice approaches. Conclusions drawn under such conditions may not transfer to competitive pipelines. In this work, we propose a new evaluation protocol that (1) treats the four components as an integrated system; (2) crucially requires competitive implementations of the components not under investigation; (3) specifies the metrics and reporting format; and (4) is accompanied by structured documentation that ensures the traceability of evaluations across studies. Based on this comprehensive protocol, we release PINNpipe, an innovative JAX package containing 18 different methods from the current literature as well as nine efficiently implemented benchmark problems. Using PINNpipe, we illustrate our evaluation protocol in relation to established benchmark studies and report results that challenge common assumptions.

0.52

Equidistribution of Solution Gradients in Physics-Informed Neural Networks via Coordinate Transformations

cs.AI math.NAcs.LG ·2026-11-06 ·Tianchi Yu, Ivan Oseledets
similarity 0.51
Abstract

Physics-Informed Neural Networks (PINNs) often struggle to approximate solutions with sharp gradients due to optimization difficulties and spectral bias. Motivated by the principle of gradient equidistribution from the stretching approach in grid generation, which redistributes solution gradients to reduce functional complexity, we propose Coordinate Transformation PINNs (CTPINNs), which incorporate learnable coordinate transformations to map the physical domain into a computational domain where the physical solutions become approximately affine, making them easier for neural networks to learn. We propose two constructions of the transformation: an explicit construction based on Majorants and an implicit construction based on invertable neural networks. Experimentally, the explicit construction can improve accuracy for PDEs with available explicit coordinate transformations, and the implicit construction can be combined with other advanced PINN models as an efficient plug-in module to improve performance across a range of challenging PDE benchmarks.

0.21