CS Paper Radar

AngularWM: Wireless World Modeling for AoA Prediction from Multi-Antenna I/Q

Omar Mashaal, Hatem Abou-Zeid

eess.SP ·submitted 2026-10-04 21:13 UTC · v2

Abstract

Tracking angle-of-arrival (AoA) under mobility enables proactive beam alignment in multi-antenna wireless systems. However, learning this evolution directly from raw I/Q data is challenging because multipath, channel-gain variations, hardware impairments, and noise mix with angular information. This paper proposes \emph{AngularWM}, a self-supervised wireless world-modeling approach that learns a predictive latent angular state from ordered multi-antenna I/Q observations. A joint-embedding predictive architecture is combined with a label-free trajectory-level geometric regularizer that encourages an approximately affine, non-collapsed latent evolution motivated by the antenna-array response. No AoA, motion, or displacement labels are used during pretraining. The resulting structured world state supports direct multi-step encoder-space extrapolation and generalizes to angular step sizes not seen during training. On large-scale over-the-air measurements, AngularWM reduces the mean predictor-free AoA error over eight steps from $29.97^\circ$ to $0.49^\circ$. After pretraining, only three or four labeled reference angles are required to calibrate the complete 225-point AoA grid, achieving $0.48^\circ$ and $0.43^\circ$ MAE, respectively. AngularWM also maintains robust beam alignment and spectral efficiency under increasing angular displacement, while reducing the deployed model size from 1.42M to 0.30M parameters and forecast latency.

Closest papers

Nearest neighbours by meaning across the whole index.

Masked Latent Prediction of CSI for Indoor Localization in Integrated Sensing and Communication Systems

eess.SP ·2026-09-08 ·Ibtissam Labriji, Mahdi Maleki, Pavan Koteshwar Srinath
similarity 0.64
Abstract · Submitted to IEEE ISAC 2026. 4 figures

Channel State Information (CSI)-based fingerprinting can enable accurate indoor localization but suffers from domain shift, limited labeled data, and degraded performance in multipath-rich environments. To address these challenges, we propose a self-supervised localization framework built on a Joint Embedding Predictive Architecture (JEPA). Each CSI time snapshot is treated as a token, and the encoder is pre-trained by predicting the latent embeddings of masked snapshots from the visible ones, learning robust channel representations without any labels. The encoder is then frozen, and only a lightweight regression head is trained on a small set of labeled positions to estimate the user location. We evaluate the framework on the measured DICHASUS-005x dataset, a single-antenna transmitter received by a 32-antenna array in a multipath-rich indoor environment. With a 50% masking ratio, the proposed method reduces the mean localization error from 0.90 m to 0.42 m (a 53% reduction, or 0.48 m) relative to a supervised Convolutional Neural Network (CNN) baseline trained on raw CSI. Owing to its label-efficient, frozen-encoder design, the framework aligns with integrated sensing and communication (ISAC) objectives, enabling reliable sensing with minimal labeling and compute overhead.

0.13

A JEPA-Based Field-Layer World Model for Bridging Channel Prediction and Estimation

eess.SP ·2026-08-10 ·Yuzhi Yang, Brahim Mefgouda, Hang Zou, Lina Bariah, Anis Bara +3 more
similarity 0.64
Abstract · submitted to IEEE trans

Channel state information (CSI) acquisition, reconstruction, and prediction are fundamental yet costly tasks in modern MIMO-OFDM wireless systems. Direct coefficient-level prediction of raw CSI is fragile in realistic propagation environments, since small spatial perturbations, local scattering changes, and phase variations can cause large errors in the complex channel domain. However, the underlying wireless propagation field still contains stable and predictable structures that can be exploited across time, frequency, antenna, and carrier dimensions. Motivated by this observation, we propose a JEPA-based field-layer world model (FWM) that learns a shared latent propagation state from multi-resolution CSI observations across the considered carrier bands and predicts its task-relevant evolution in the latent domain. The proposed FWM maps multiple CSI observation resolutions to a shared latent propagation-field space through scale-specific tokenizer heads. A latent prediction backbone is then trained to infer masked or future field states, while an incremental multi-scale alignment strategy allows new observation scales to be incorporated without retraining the entire model from scratch. For downstream reconstruction, the predicted latent field is used as a structured prior and combined with sparse current pilots. Experiments on single-band and cross-band reconstruction demonstrate improved symbol detection and, more notably, substantial beamforming gains despite modest NMSE improvements, indicating that FWM captures task-relevant spatial propagation structure beyond coefficient-wise CSI fitting.

0.35

Channel2World: A Wireless Foundation Model for RF Environment Representation

eess.SP ·2026-08-18 ·Hyung-Joo Moon, Joonkyu Jang, Kwang Soon Kim, Seong-Lyun Kim, Robert W. Heath +1 more
similarity 0.64
Abstract · 13 pages, 10 figures

Wireless channels are commonly treated as link-specific observations, although their multipath structure is governed by the surrounding radio-frequency (RF) environment. In this paper, we propose Channel2World, a wireless foundation model that learns a reusable environment-level representation from multiple-input multiple-output (MIMO) channel-position observations. The model aggregates channels collected within the same base-station-centered environment into a wireless world embedding using a Transformer-based encoder. The encoder is pretrained through context-query prediction, where context channels condition user equipment (UE) position and relative path-gain prediction for disjoint query channels. After pretraining, the encoder is frozen and used as a task-agnostic environment-conditioning module for downstream wireless models, enabling adaptation to unseen environments without site-specific fine-tuning. To learn an environment-level latent space that generalizes across deployments, we pretrain Channel2World using ray-tracing data from 26,000 environments, with approximately 5,000 channel measurements per environment. Evaluations on UE localization, beam-domain channel state information (CSI) reconstruction, and RF-observable geometry reconstruction show that the learned embeddings provide effective conditioning in unseen environments. For localization and CSI reconstruction tasks, embedding-based conditioning outperforms or remains competitive with site-specific fine-tuning, although fine-tuning requires task-specific labeled data and additional gradient-based adaptation. The embeddings also support the reconstruction of dominant reflector structures, indicating their utility as reusable environmental priors across tasks.

0.43

RFWeave: Learning Wireless Propagation Across Scenes and Transceiver Configurations

eess.SP cs.LG ·2026-10-12 ·Shurui Xu, Xiao Ye, Yijie Bian, Junjie Ai, Yuxuan Chen +3 more
similarity 0.62
Abstract · 20 pages, 12 figures, 12 tables, including appendices

Wireless propagation modeling is foundational to the evaluation and design of modern communication systems. To achieve accurate wireless propagation prediction, recent learning-based approaches leverage scene geometry and materials, demonstrating promising generalization across transceiver locations and unseen scenes. However, these approaches remain largely confined to a fixed configuration of array size, receiver orientation, and transmit beam. In this work, we introduce RFWeave, a learned wireless propagation model designed to generalize across scenes, transceiver locations, and transceiver configurations. To accommodate varying array structures, RFWeave incorporates variable-length transceiver tokens that represent antenna elements individually. Furthermore, to capture the geometry between transmit and receive antenna elements, RFWeave aggregates their pairwise spatial relations into propagation tokens. A configuration-conditioned decoder predicts the spatial spectrum and received power. RFWeave is trained on a large-scale simulated dataset spanning 10,000 indoor scenes and more than 5 million channel records under diverse transceiver configurations. Extensive evaluations show that RFWeave achieves state-of-the-art performance across all evaluated generalization settings, improving spatial spectrum structural similarity (SSIM) by up to 15.7% and reducing received power mean absolute error (MAE) by up to 35.4% over the strongest baselines on unseen scenes. Additional experiments on measured DICHASUS data and in beam management further demonstrate RFWeave's broader applicability to real-world channels and downstream wireless tasks.

0.24

Enabling Versatile Human Sensing through Wi-Fi Beamforming Feedback

eess.SP ·2026-11-12 ·Jingzhe Zhang, Peiliang Wang, Yitong Shen, Ning Wang, Mingzhe Chen +1 more
similarity 0.62
Abstract

Wi-Fi sensing enables contactless human sensing, while most existing systems rely on Channel State Information, which is accessible only on a limited range of Wi-Fi chipsets. In contrast, Beamforming Feedback Information (BFI) is standardized in modern Wi-Fi and readily accessible on a wide range of commodity devices, offering new opportunities for human sensing. In this paper, we present BeamLens, a Wi-Fi sensing system that extracts fine-grained spatial information from BFI to enable versatile human sensing. Specifically, we jointly estimate the angle of departure and relative time of flight from BFI to extract fine-grained spatial information and leverage two AP-STA links to capture complementary azimuth and elevation views. We further design a sparse physical antenna array and construct a uniform virtual antenna array to enhance spatial resolution. Moreover, we fuse complementary views through self-supervised learning, combining temporally aware cross-view contrastive learning and temporal masked reconstruction to learn a versatile backbone for diverse human sensing tasks. Extensive evaluations demonstrate that BeamLens achieves 90.16\% accuracy in human activity recognition, a mean per-joint position error of 8.64\,cm in 3D human pose estimation, and 70.64\% intersection over union in human silhouette estimation, while exhibiting strong generalization to unseen environments and subjects.

0.14

WiNeRF: Measurement Constrained Radiance Fields for Actionable Wireless Channel Modeling

cs.NI cs.LG ·2026-08-24 ·Saif Ur Rahman, Rafid Umayer Murshed, Anton Dmitriev, Cagri Tanriover, Rahul C. Shah +1 more
published similarity 0.60
Abstract · Accepted to EWSN 2026

Wireless embedded systems increasingly rely on wireless channel information for decision making, yet practical platforms operate under severe constraints, including few antennas, narrow bandwidth, and sparse, noisy measurements. While neural field based approaches inspired by Neural Radiance Fields (NeRFs) have recently been explored for continuous wireless channel modeling, existing approaches depend on dense measurements or external priors such as known geometry, visual context, or angle-of-arrival (AoA) information, limiting their practicality in real-world deployments. We present WiNeRF, a neural field framework that learns a spatially continuous, complex-valued wireless channel representation directly from sparse channel state information (CSI) collected by commodity WiFi devices. WiNeRF embeds intrinsic system constraints, such as antenna geometry, limited spatial resolution, and phase uncertainty, as inductive biases through a 3D conical wave sampling model, a multi-resolution implicit scene representation, and a differentiable optimization framework for complex-valued channel learning. Across diverse indoor environments with non-line-of-sight (NLoS) regions, WiNeRF achieves a median prediction SNR of 5.3 dB, outperforming prior neural baselines by 4.9 dB on average (approximately 3x higher prediction SNR), and produces a task-agnostic channel representation that can be directly reused in standard signal-processing pipelines, including beamforming, AoA estimation, and RSSI coverage mapping, without modifying existing hardware or wireless protocols.

0.37

Orthogonal JEPA: Factorized Predictive States for Latent World Models

cs.LG ·2026-08-20 ·Taoyong Cui, Pheng Ann Heng, Wanli Ouyang
similarity 0.59
Abstract · This manuscript has been superseded by a substantially revised version, arXiv:2609.20800. The simultaneous existence of both records has cau…

World models construct latent states that support prediction, planning, and reasoning about an underlying system. Joint-embedding predictive architectures (JEPAs) offer a direct way to learn such states by predicting targets in representation space instead of reconstructing every detail of the observation. Standard JEPAs, however, organize all predictable content through one target embedding and one prediction pathway. In complex systems, this monolithic state can allocate redundant capacity to dominant signals while providing weak or conflicting gradients to less dominant predictive structure. We introduce \method, a latent world-modeling framework based on orthogonal predictive factorization. Learned basis matrices analyze each target state into multiple components, and a dedicated prediction branch estimates each component from a shared context representation. Predictive regression preserves the factor magnitudes required for state synthesis, an orthogonality objective discourages repeated directions, factor-activity regularization maintains variation in projected targets, and online variance regularization discourages coordinate-wise encoder collapse. Predicted components are synthesized into a complete latent state that can be used by a readout, decoder, planner, or autoregressive rollout. The same predictive-state mechanism applies when the target is temporally future, spatially hidden, or another partial observation of the same system. Experiments on controlled vision, single-cell transcriptomics, longitudinal health records, continuous control, and molecular dynamics evaluate representation quality, forecasting, planning, and long-horizon stability.

0.15

MambaLoc: Lightweight Indoor Localization Using Cross-Modal Knowledge Distillation

cs.AI cs.NI ·2026-11-07 ·Mohab Bahnassy, Omar Saqr, Hamada Rizk, Moustafa Youssef
published similarity 0.59
Abstract

Accurate indoor localization on resource-constrained edge devices remains challenging due to the tension between modeling fidelity and computational efficiency. Wi-Fi Channel State Information (CSI) enables low-cost deployment using existing Wi-Fi infrastructure but is heavily distorted by multipath propagation. Transformer-based solutions mitigate these effects but their quadratic complexity limits real-time edge deployment. Ultra-Wideband (UWB) provides geometrically precise ranging yet requires dedicated infrastructure. We present MambaLoc, a cross-modal distillation framework that improves the accuracy-efficiency balance in CSI-based localization. MambaLoc uses a linear-time Selective State Space Model (Mamba) as a lightweight CSI student, guided during training by a UWB-Transformer teacher. A Feature Alignment Module bridges the representational gap between heterogeneous RF modalities, allowing the CSI model to inherit UWB-derived geometric structure without UWB hardware at inference. A probabilistic Gaussian Mixture regression head models multi-modal spatial ambiguity from multipath effects, avoiding the physically implausible averaging of deterministic regression. Evaluations on a real-world dataset show MambaLoc achieves a median localization error of 0.230 m, reducing error by 22.2% over a standalone Mamba baseline, while requiring 65.1% fewer FLOPs and 58% lower inference latency than Transformer-based approaches.

0.39