CS Paper Radar

Robust Nonprehensile Object Transport with Quadruped Robots

Ainoor Teimoorzadeh, Riccardo Pretto, Mario Selvaggio, Gokhan Alcan, Sami Haddadin

cs.RO ·submitted 2026-10-05 18:46 UTC · v1
hot direction

Abstract

In this paper, we present a robust nonprehensile object transportation framework for quadruped robots. An uncertainty-aware trajectory optimization method generates object motions with minimal closed-loop sensitivity to uncertain parameters. The resulting reference trajectory is tracked using a coupled convex model predictive controller that jointly predicts the CoM dynamics of the quadruped and the payload followed by a whole-body QP that enforces ground reaction constraints. The approach is evaluated through extensive simulations and real-world experiments under variations in the object's inertial parameters. Its performance is compared with fixed-orientation and straight-line trajectories as baseline. The results show that the optimized object motion reduces the sliding by approximately 50% compared with the fixed-orientation baseline and 30% compared with the straight-line baseline, while also achieving lower robot CoM tracking errors.

Comment
9 pages, 8 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Safe Multi-Robot Collaborative Transport Using Density Functions

cs.RO ·2026-10-06 ·Jagannath Prasad Sahoo, Sriram S. K. S. Narayanan, Umesh Vaidya
code/datahot direction similarity 0.65
Abstract

This paper presents a hierarchical density-based model predictive control framework for safe collaborative manipulation by multiple quadrupedal robots. The framework enables a team of robots to push a shared object to a desired pose using only the initial and goal poses, without requiring a precomputed reference trajectory. A centralized box-level MPC optimizes contact forces while enforcing a control-density constraint for goal convergence and obstacle avoidance. Each robot then solves its own distributed robot-level whole-body MPC, under a stated shared-information assumption, to track its moving contact location while accounting for static obstacles and the time-varying positions of neighboring robots. The approach is evaluated in MuJoCo using whole-body contact dynamics for two and three Unitree Go2 quadrupeds collaboratively pushing rigid objects through narrow passages. Comparisons with matched Control Barrier Function and RRT* based tracking baselines demonstrate the effectiveness of the proposed density-based formulation for push-only, force- and torque-coupled manipulation tasks. Implementation videos are available at https://jaggu2606.github.io/go2-density-mpc-pushing/

0.44

SOMA: Stack-of-Objects Manipulation using a Quadruped Robot

cs.RO cs.AI ·2026-10-14 ·Stergios E. Bachoumas, Panagiotis Artemiadis
similarity 0.65
Abstract · 9 pages

Executing heavy-duty physical manipulation in unpredictable environments remains a major challenge for quadrupedal robots lacking dedicated manipulators. This paper presents SOMA, a hierarchical reinforcement learning framework for whole-body non-prehensile manipulation of multi-object stacks using a quadruped robot. Unlike traditional methods restricted to two-dimensional planar pushing, SOMA integrates explicit robot base-height control, unlocking full three-dimensional pushing strategies. This capability enables the quadruped to manipulate complex payload stacks as a unified system while preventing relative sliding or tipping of upper layers. The architecture factorizes control into a high-level manipulation policy using a Simplified Structured State Space Sequence (S5) encoder to reason over long-horizon temporal history and predict bounded target tracking commands via Beta distributions, and a low-level locomotion policy that dynamically adapts leg stance configurations. In extensive simulation benchmarks, SOMA achieves a $90.3\%$ success rate for single-object reposing and up to $90.1\%$ for dynamic two-box stacks under stringent error margins ($0.05\text{ m}$ position error, $1^\circ$ orientation error). Finally, we validate zero-shot sim-to-real transfer on a Unitree Go1 quadruped robot across diverse payload masses and geometries, demonstrating active base-height adjustments to maintain traction and balance during heavy pushing tasks.

0.28

Duty Factor Predicts Robust Constrained Quadrupedal Locomotion Across Gait Types

cs.RO ·2026-09-18 ·James Zhu, David Ologan, George Ortiz, Thomas Chun Fai Lee, Selvin Garcia Gonzalez +3 more
similarity 0.64
Abstract

Quadrupedal robots are increasingly deployed in environments where locomotion must remain robust to disturbances and constrained terrain. Gait type, such as walking or trotting, is commonly used to characterize quadrupedal locomotion. However, gait type does not uniquely define locomotion, as parameters such as duty factor, speed, and stance width can vary within a single gait type. In this work, we investigate the relationship between these gait parameters using three distinct quadrupedal locomotion control approaches. First, using whole body trajectory optimization with LQR feedback, we show that duty factor is a stronger predictor of local error convergence than nominal gait type. Second, we investigate duty factor selection with a learned locomotion controller, suggesting how duty factor may serve as a low-dimensional parameter for adapting locomotion robustness in narrow-terrain environments. Finally, we show that these trends persist under a centroidal model predictive control framework and validate them through narrow-terrain experiments on a physical quadruped. These results show that duty factor provides a simple and effective basis for understanding and selecting robust quadrupedal locomotion across gait types and control architectures.

0.27

Transporting Unsecured Stacked Payloads with a Quadrupedal Robot via Multi-Objective Reinforcement Learning

cs.RO cs.LG ·2026-10-05 ·Nobuo Namura, Masayuki Hiromoto, Kento Uemura, Hironobu Sasaki, Kanata Suzuki
hot direction similarity 0.63
Abstract · 8 pages, 6 figures

Transporting unsecured payloads with legged robots over uneven terrain requires balancing locomotion performance and payload stability, since aggressive motion can destabilize the payload even when the robot remains stable. We study quadrupedal transportation of unsecured stacked boxes on an edgeless torso-mounted board without dedicated payload sensors or active carrier mechanisms. To address this trade-off, we propose Payload-Adaptive Multi-Objective Reinforcement learning for Transportation (PAMORT). PAMORT trains a multi-objective base policy conditioned on a preference vector that weights locomotion and payload-stability reward groups, then trains a weight adjuster on the frozen policy to adapt this preference online from proprioception. In simulation, PAMORT achieves comparable or better overall transportation success than a corresponding single-objective baseline across different payload configurations, including an unseen three-box stack, despite training only with two boxes. Real-world experiments on a Unitree Go2 demonstrate zero-shot transfer to slopes and steps at or beyond the training difficulty, with mean success rates of 0.850 for PAMORT and 0.675 for the baseline across eight tasks. These results demonstrate robust unsecured-payload transportation with online adaptation of the locomotion--payload trade-off from proprioceptive information.

0.26

Adaptive Whole-Body MPC with Optimal Posture Planning for Humanoid Robots under Unknown Payloads

cs.RO ·2026-10-09 ·Manh Cuong Nguyen, Duc Cuong Vu, Viet Anh Vu, Duc Tuan Pham, Toan Nguyen +3 more
publishedhot direction similarity 0.62
Abstract · Accepted for presentation at the 25th IEEE RAS International Conference on Humanoid Robots (Humanoids2026)

Humanoid robots performing lifting and material-handling tasks must maintain balance despite unknown and varying payloads. However, payload uncertainty significantly affects whole-body dynamics and may destabilize conventional controllers. We propose an adaptive whole-body control architecture that integrates three components: (i) a centroidal model predictive controller (MPC) that generates dynamically feasible reference motions, (ii) an adaptive fuzzy balance controller that compensates for payload-induced model mismatch by generating corrective torques distributed across the supporting-leg joints, and (iii) a waypoint-based optimal posture planner built on a triple-integrator model that produces smooth sit-to-stand and stand-to-sit trajectories satisfying center-of-mass (CoM) stability constraints, joint limits, and whole-body feasibility requirements. Together, these components enable stable lowering, grasping, lifting, carrying, and placing behaviors under significant payload uncertainty. Extensive simulation and hardware experiments demonstrate that the proposed framework improves balance robustness and reduces tracking degradation during posture transitions and lifting tasks compared to non-adaptive baselines.

0.43

Real-Time Control-Constrained DDP for Underactuated Balancing of Legged Robots

cs.RO math.OC ·2026-08-19 ·SeongWon Nam, Hyunyong Lee, Hansol Kang, Jiman Park, Yeongwoo Son +3 more
top venue similarity 0.62
Abstract · This version includes a minor correction to the notation in Eq. (2)

This paper presents a real-time control-constrained Differential Dynamic Programming (DDP) framework for underactuated legged robots. To address the limitation of classical DDP in handling control constraints, we propose an Accelerated Projected Gradient (APG)-based control-constrained DDP (ABC-DDP), which efficiently computes constrained solutions and identifies active sets without repeated Karush-Kuhn-Tucker (KKT) inversions. A virtual constraint is introduced to integrate control constraints within a feasibility-driven multiple-shooting framework, enabling stable optimization even from dynamically infeasible initializations. The proposed method supports real-time model predictive control (MPC) with short horizons under strong underactuation. Simulation results demonstrate static two-leg standing under external disturbances, along with diverse dynamic motions including slow catwalk, upright walking, and high-speed running within a unified MPC framework. To the best of our knowledge, this is the first demonstration of static two-leg standing of a quadruped robot achieved using real-time finite-horizon MPC.

0.43

Continuous-Time Safe Planning and Control for Agile Quadrupeds

cs.RO ·2026-10-26 ·Gage MacLin, Mason Peterson, Camilla Tabasso, Venanzio Cichella, Joshua Migdal +2 more
similarity 0.62
Abstract

Agile quadruped navigation in dynamic environments demands trajectories that are both dynamically feasible and provably collision-free. Most real-time planners achieve tractability through a convex reduction that requires simplified kinematic models, discarding motion that the robot can readily execute, and certify safety only at discretization points, leaving open possible inter-sample collisions with moving obstacles. We present a real-time motion planning framework that retains the fully-actuated $SE(2)$ model of a quadruped, with its anisotropic, heading-coupled velocity bounds, and accepts the resulting nonconvexity. By parameterizing trajectories as composite Bernstein polynomials, we exploit the convex hull property to certify collision avoidance and the input bounds over the entirety of each planning horizon. Solved at online replanning rates, the optimization runs in closed loop, commanding body velocities to the locomotion controller. We validate the approach in simulation against ablations and external baselines, and in hardware experiments on a quadruped navigating among unknown moving obstacles, recovering both lateral and heading-coupled motion that simplified models exclude.

0.25

Load-Aware Quadruped Navigation with Online Contact-based Geometry Estimation

cs.RO ·2026-10-10 ·Qi Yin, XiaoLi Zhang, Yangming Shi
similarity 0.61
Abstract · 19 pages, 12 figures, 5 tables. Project website: https://qiii04.github.io/LOADNav/

Navigating cluttered environments while carrying objects remains a challenging problem for quadruped robots. Compared with works that focused on load-aware locomotion adaptation to maintain gait stability, existing autonomous navigation systems generally ignore the influence of carried objects' geometries and use fixed footprint inflation, leading to overly conservative navigation. To fill this knowledge gap, we propose a two-phase load-aware navigation learning framework. In Phase 1, we train LOADNav, a load-aware navigation policy via reinforcement learning, enabling the robot to adapt its trajectory and clearance behavior according to the geometric size of the carried object. In Phase 2, we train CoGE, an online geometry predictor via imitation learning, which estimates unknown payload geometry from occasional contact events. We evaluate the framework in cluttered environments with loads of varying sizes and shapes. The results show that our navigation policy exhibits clear load-aware behaviors, and the online geometry predictor estimates object geometry from occasional contact events, refining its estimate and adapting the navigation behavior accordingly. Without requiring any prior knowledge of the payload, it narrows the gap to geometry-aware policies.

0.33