CS Paper Radar

Simplified Swarm Optimization for Surrogate-Assisted Reliability Design of Insulated-Gate Bipolar Transistor Power Modules Using an Open-Source Process Finite-Element Model

Wei-Chang Yeh

cs.NE cs.CEmath.OC ·submitted 2026-10-05 21:20 UTC · v1
code/dataunusual

Abstract

Process-induced warpage, ceramic stress and solder strain limit the reliability of insulated-gate bipolar transistor (IGBT) modules on direct-bonded copper (DBC) substrates. Surrogate-assisted design studies train regression models on finite-element analysis (FEA) databases, but rarely check the optimized designs against new FEA or report how surrogate error interacts with the optimizer. This paper builds and evaluates an open pipeline: an open-source process finite-element model, surrogates tuned by Simplified Swarm Optimization (SSO), multi-objective design search, FEA confirmation of selected designs and confirmation-driven infill. The model starts at the second reflow and reproduces measured warpage within 18.2%, 33.6% and 15.3% at the reflow, housing and molding stages without fitted parameters. On a balanced 60-design database, all stochastic tuners reach the same test accuracy, outperform the published grid on cross-validated performance for every output but generalize better only for warpage; the cross-validated ranking of tuners does not transfer to the test set. With equal result reporting, multi-objective SSO and the non-dominated sorting genetic algorithm II give comparable Pareto fronts; a corrected multi-objective particle swarm optimizer trails both. FEA confirmation shows that warpage predictions hold (mean absolute error 0.5%), whereas at the design-space bounds reached by the optimizers the ceramic-stress surrogate is optimistic by up to 26%. Two confirmation-driven infill rounds reduce this error to 1-10% and halve the out-of-sample error; no confirmed design improves on the database in ceramic stress. Ceramic-stress results are indicative, as the metric is mesh-sensitive at production resolution. The model, database, scripts and pre-registered and post-registration results are released.

Comment
Submitted to Engineering Applications of Artificial Intelligence. 41 pages, 8 figures, 14 tables (5 supplementary)

Closest papers

Nearest neighbours by meaning across the whole index.

Generative AI-Driven Parametric Design Optimization Framework for Vehicle Closure Systems

cs.LG ·2026-11-16 ·Dongeon Lee, Yurim Lee, Jiyong Kim, Sanghyeon Kim, Sanghyun Lee +3 more
similarity 0.56
Abstract · 26 pages, 15 figures

This study presents a generative AI-driven parametric design optimization framework integrating performance-oriented generation with editable computer-aided design (CAD) and downstream computer-aided engineering (CAE) analysis for industrial vehicle closure systems. The framework is demonstrated on an automotive tailgate assembly with complex geometry, coupled components, and competing performance and feasibility requirements. A production-oriented CATIA model is restructured into a reference-based parametric template with a 13-dimensional design representation. An automated CAD/CAE workflow generates parametric models, performs structural analysis, and constructs a database of mass, maximum displacement, and maximum von Mises stress. Gaussian process regression surrogates predict performance, while diffusion and flow matching models generate design candidates. The design problem minimizes mass and maximum displacement, with stress assessed as an engineering feasibility constraint. Performance-guided generation using surrogate guidance and performance-aware training using a performance-aware loss incorporate engineering objectives, with sensitivity to guidance scale and loss weight evaluated. Generative search is compared with NSGA-II under matched evaluation budgets using a common surrogate model. Selected Pareto-region candidates are reconstructed in CATIA and re-evaluated through native CAE; all verified candidates are successfully regenerated and analyzed. Relative to the baseline, the knee-point design reduces mass by 7.1% and maximum displacement by 29.4%, while extreme verified solutions achieve maximum reductions of 10.3% and 37.3%, respectively. The results demonstrate performance-oriented multi-objective design exploration compatible with editable industrial CAD and native engineering verification.

0.32

Decision-Gated Surrogate-Assisted Stochastic Optimization with Independent High-Fidelity Certification for Photovoltaic Hosting-Capacity Planning

eess.SY ·2026-09-25 ·Ali Abubakar, Samuel Essamuah Assabil, Akhtar Hussain, Van-Hai Bui
similarity 0.55
Abstract · 17 pages

High photovoltaic (PV) penetration planning requires repeated nonlinear PV and power-flow evaluations under uncertain irradiance and demand, particularly when two competing objectives, penetration and total electrical loss, are optimized simultaneously subject to reliability constraints. This paper develops a decision-focused, surrogate-assisted stochastic multiobjective framework in which a calibrated PV model coupled with a distribution-network simulator provides the high-fidelity reference, while matched data-only and physics-informed surrogates accelerate optimization and are evaluated empirically for decision reliability across the loss-penetration tradeoff. Although the two surrogates exhibit nearly identical held-out errors, optimizer-realistic screening yields markedly different operational validity rates of 44.4% and 93.4%, respectively, motivating selection of the physics-informed model on decision performance rather than test accuracy. Surrogate inference cuts the cost of a 60-scenario design evaluation from 286.0 to 0.46 ms, an approximately 620 time speedup. A decision-gated enrichment strategy further targets Pareto-critical, constraint boundary, and surrogate-disagreement regions, reducing prediction error by 39.1%. Independent 500 scenario certification verifies all 80 screened candidates and identifies 46 non-dominated designs; the selected compromise attains 70.74% expected penetration with 297.9 kW expected total electrical loss. Cross-feeder transfer eliminates baseline voltage violations on the 85- and 69-bus systems, but produces overvoltage and a 62.7% increase in feeder-network loss on the 33-bus system, demonstrating that certified penetration is topology-specific and demands decision-level auditing, independent certification, and feeder-specific validation.

0.24

A Surrogate-based Approach for Fast Multi-objective Architectural Refactoring Optimization

cs.SE ·2026-09-07 ·J. Andrés Diaz-Pace, Daniele Di Pompeo, Antonela Tommasel
published similarity 0.54
Abstract

Software model optimization is a process that generates architecture alternatives aimed at improving quantifiable non-functional properties of software systems, such as performance and reliability. Multi-objective evolutionary algorithms are commonly used to explore the search space and help designers identify trade-offs among competing non-functional properties (e.g., through a Pareto front). However, such algorithms face efficiency challenges in complex software models and large design spaces, since evaluating the fitness (i.e., the quality) of each architecture requires analysis tools that become computationally expensive when repeatedly invoked during the search process. In this paper, we explore the construction of surrogate models based on regression techniques to approximate the outputs of these analysis tools at significantly lower computational cost, while maintaining reasonable output accuracy. Our experimental results suggest that surrogate models provide savings of up to $30\%$ in computational time and maintain the Pareto front quality provided by evolutionary algorithms. Also, we observed some differences in the architectural models produced by our approach. Overall, surrogate models constitute a promising approach for scaling multi-objective architecture optimization to larger spaces and complex architectural models.

0.43

A Novel Multi-fidelity Surrogate for Efficient Turbine Design Optimization

cs.CE physics.flu-dyn ·2026-09-10 ·Qineng Wang, Liming Song, Zhendong Guo, Jun Li, Zhenping Feng
publishedhighly cited similarity 0.54
Abstract · Journal author manuscript; 12 pages, 13 figures. Related conference article: DOI 10.1115/GT2023-104237

To solve the turbine design optimization problems efficiently, surrogate-based optimization (SBO) algorithms are frequently used. To further reduce the cost of turbine design, the multi-fidelity surrogate (MFS) based optimization is proposed by the researchers, who resort to augmenting the small number of expensive high-fidelity (HF) samples by a large portion of low-fidelity (LF) but cheap samples in surrogate modeling and optimization process. Nonetheless, according to our observations, the MFS based optimization sometimes can only have better convergence rate at the early stage of optimization process, but yielding worse final solution than the single-fidelity surrogate (SFS) based optimization that uses high-fidelity samples alone. The reason behind can be explained as follows. With the increase of HF samples in the optimization process, the LF samples can cause negative effect and therefore misleading the optimization search. To address the above issue, an ensemble weighted multi-fidelity surrogate (EMFS) is proposed. Specifically, the density-based spatial clustering of applications with noise (DBSCAN) is used to detect the region where the MFS cannot build a more accurate surrogate, and a local SFS is built there. Then, an EMFS is built by combining the MFS and SFS with adaptive weights, which is used to guide the optimization process. The related algorithm is named as multi- and single-fidelity surrogate fused optimization, i.e., MSFO. Through tests on GE-E3 blade optimization and the film cooling layout design of a turbine endwall, the effectiveness of proposed MSFO is well demonstrated.

0.75

Benchmarking Tabular Foundation Models as Surrogates in Expensive Evolutionary Optimization

cs.NE cs.LG ·2026-09-16 ·Lu Han, Jin Wang, Yuchen Li, Haoran Gu, Shulei Liu +3 more
similarity 0.54
Abstract

Surrogate-assisted evolutionary algorithms (SAEAs) are effective methods for solving expensive optimization problems (EOPs), where surrogate models replace most expensive evaluations and critically influence the final optimization results. In recent years, tabular foundation models have advanced rapidly, and the Tabular Prior-data Fitted Network (TabPFN) has been adopted as a surrogate model for EOPs due to its strong predictive capability, demonstrating promising performance. Motivated by its potential as a surrogate model in SAEAs, this work conducts a comprehensive study that combines extensive experiments with in-depth theoretical analysis to investigate the effectiveness of TabPFN. Specifically, we perform experiments across both offline and online SAEA settings, covering diverse problem scenarios such as single-objective, multi-objective, constrained, combinatorial, mixed-variable, and engineering optimization problems. In addition, we further analyze the advantages and limitations of TabPFN within SAEAs and provide practical guidelines for its application in different optimization settings. Results show that the effectiveness of TabPFN is highly problem dependent, and it cannot replace conventional surrogates universally. Overall, TabPFN should be adopted selectively according to data availability, landscape complexity, search space characteristics, and its role within the algorithm. Customized model management strategies and role-specific algorithm design are necessary to fully exploit its advantages and avoid its pitfalls.

0.25

A FEM-Based Surrogate Modelling and Optimization Framework for Physics-Constrained Electromagnetic Coil Design

cs.LG ·2026-08-19 ·Yucheng Liu
benchmark similarity 0.53
Abstract · 18 pages, 9 figures

This work evaluates surrogate-assisted optimization of a seven-parameter current-excited coil--core benchmark subject to geometric, manufacturing, and separate core and copper mass constraints. A Python--MPh--COMSOL workflow couples a two-dimensional axisymmetric finite-element method (FEM) model to a Matern 5/2 Gaussian-process (GP) probabilistic surrogate. Here, physics-constrained denotes a design problem evaluated by a governing-equation FEM model and restricted by explicit physical, geometric, manufacturing, and material-allocation constraints; it does not denote a physics-informed GP architecture. Sequential Bayesian optimization (BO) ranks candidates using expected improvement (EI), and every reported incumbent is verified by FEM. Five paired runs show that optimizer ranking depends on the available FEM-evaluation budget: EI--BO improves rapidly at small continuation budgets, COBYLA is stronger at the earliest checkpoint, and BOBYQA attains the highest mean terminal response. A retrospective finite-pool study further finds no robust endpoint advantage of EI over posterior-mean ranking on this smooth response surface. The broader result is that early progress, terminal response, information use, and wall-clock cost can favor different methods in simulation-driven design. A selected-design check at a common total current preserves the observed BOBYQA--COBYLA--EI-BO ordering. The conclusions nevertheless remain conditional on this axisymmetric benchmark and do not establish a fixed-current optimum, fixed-power performance, or electrical-efficiency superiority.

0.29

Topology as a Design Variable: Joint Architecture-Sizing Optimization for SRAM

cs.LG ·2026-11-06 ·Can Wang, Junhao Ma, Yikai Wang, Shan Shen, Wei W. Xing
publishedcode/data similarity 0.52
Abstract · Accepted by ASPDAC2027

SRAM's power-performance-area-stability trade-off depends on bitcell topology, a discrete architectural choice that interacts non-separably with continuous transistor sizing. However, no open-source SRAM tool treats topology as an optimizable variable. OpenRAM generates SRAM layouts but performs no optimization, while OpenYield supports high-fidelity evaluation but restricts optimization to scalar sizing of a fixed 6T cell. OpenYieldV2 closes this gap through three integrated contributions. First, a fully parameterized compiler generates complete 6T and 10T SRAM macros with peripheral circuits and replica-bitline self-timing, enabling topology comparison under identical simulation conditions. Second, a few-shot TabPFN surrogate learns topology-dependent PPA responses with limited full-macro SPICE samples. Third, a coarse-to-refined multi-objective optimizer combines global exploration of discrete architectural choices with local refinement of continuous transistor sizes. Experiments across varying design conditions reveal a topology decision boundary that shifts with operating constraints rather than following a fixed design rule. Jointly optimizing across this boundary improves hypervolume by up to 17.3\% over the strongest single-topology baseline. OpenYieldV2 is open-source to support reproducible SRAM design research.

0.39

A Novel Multi-fidelity Surrogate for Turbomachinery Design Optimization

cs.CE physics.flu-dyn ·2026-09-10 ·Qineng Wang, Liming Song, Zhendong Guo, Jun Li, Zhenping Feng
publishedbenchmark similarity 0.51
Abstract · Conference author manuscript; 10 pages, 12 figures. Related journal article: DOI 10.1115/1.4064228

Turbomachinery design optimization involves expensive black-box problems. Sample-efficient multi-fidelity optimization (MFO) offers an efficient solution. By utilizing multi-fidelity surrogates (MFS), the MFO algorithm can use fewer high-fidelity samples aided by low-fidelity samples to establish an accurate surrogate model. However, when MFS is used in sequential sampling optimization, it has been observed that the final optimal solution obtained by single-fidelity optimization (SFO) is better than that of MFO, even though MFO performs better at the early stages. This can be attributed to the assumption of an even and nested distribution of samples, which is incorrect when using a sequential adding strategy. To address these issues, we propose a novel algorithm called multi-single-fidelity optimization (MSFO) to overcome the limitations of the conventional MFO procedures. In the surrogate establishment of MSFO, we use the density-based spatial clustering of applications with noise (DBSCAN) method to detect local areas where low-fidelity samples are no longer effective. A combination of both global MFS and local single-fidelity surrogate model, built using high-fidelity samples alone, is used to establish an ensemble, which improves the anti-interference ability of the algorithm against misleading low-fidelity data. The effectiveness of the MSFO algorithm is verified first on numerical benchmark functions. Then, the algorithm is used to optimize the aerodynamic profile of a turbine and the film cooling layout design of a turbine endwall. Here, high-fidelity sample sources are obtained from fine-mesh CFD simulations, whereas low-fidelity sample sources are obtained from the same simulations run on a coarser mesh. The results demonstrate that our MSFO algorithm performs significantly better than the conventional SFO and MFO processes, with a higher level of robustness.

0.72