CS Paper Radar

Decision-Gated Surrogate-Assisted Stochastic Optimization with Independent High-Fidelity Certification for Photovoltaic Hosting-Capacity Planning

Ali Abubakar, Samuel Essamuah Assabil, Akhtar Hussain, Van-Hai Bui

eess.SY ·submitted 2026-09-25 05:51 UTC · v1

Abstract

High photovoltaic (PV) penetration planning requires repeated nonlinear PV and power-flow evaluations under uncertain irradiance and demand, particularly when two competing objectives, penetration and total electrical loss, are optimized simultaneously subject to reliability constraints. This paper develops a decision-focused, surrogate-assisted stochastic multiobjective framework in which a calibrated PV model coupled with a distribution-network simulator provides the high-fidelity reference, while matched data-only and physics-informed surrogates accelerate optimization and are evaluated empirically for decision reliability across the loss-penetration tradeoff. Although the two surrogates exhibit nearly identical held-out errors, optimizer-realistic screening yields markedly different operational validity rates of 44.4% and 93.4%, respectively, motivating selection of the physics-informed model on decision performance rather than test accuracy. Surrogate inference cuts the cost of a 60-scenario design evaluation from 286.0 to 0.46 ms, an approximately 620 time speedup. A decision-gated enrichment strategy further targets Pareto-critical, constraint boundary, and surrogate-disagreement regions, reducing prediction error by 39.1%. Independent 500 scenario certification verifies all 80 screened candidates and identifies 46 non-dominated designs; the selected compromise attains 70.74% expected penetration with 297.9 kW expected total electrical loss. Cross-feeder transfer eliminates baseline voltage violations on the 85- and 69-bus systems, but produces overvoltage and a 62.7% increase in feeder-network loss on the 33-bus system, demonstrating that certified penetration is topology-specific and demands decision-level auditing, independent certification, and feeder-specific validation.

Comment
17 pages

Closest papers

Nearest neighbours by meaning across the whole index.

Learning to Solve Two-Stage Stochastic Unit Commitment Problems with Quality Guarantees

eess.SY math.OC ·2026-09-16 ·Andrea Fusco, Andrea Lodi, Lavanya Marla
benchmark similarity 0.61
Abstract · 11 pages, 2 figures, 3 tables, 1 algorithm. Submitted to IEEE Transactions on Power Systems

Two-stage stochastic Mixed-Integer Linear Programs are a canonical modeling tool to optimize power system operations under uncertainty, yet their extensive-form counterparts scale linearly with the number of scenarios and quickly become computationally prohibitive under day-ahead time constraints. We propose an Input Convex Neural Network architecture to learn a convex surrogate of the second-stage value function, enabling fast first-stage optimization while preserving convexity by construction. We couple the surrogate with a Neural-Benders correction loop that refines the first-stage solution a posteriori, recovering the exact optimum whether the network overestimates or underestimates the recourse cost, and certifying solution quality independently of surrogate accuracy. We evaluate the method on IEEE Stochastic Unit Commitment benchmarks (case9-case118) under both continuous and integer recourse. The proposed approach achieves solutions with zero optimality gap on the $K$-scenario instance across all test cases and scenario dimensions $K \in \{10, 50, 100\}$, with speedups up to $214\times$ over the Extensive Form in the integer setting. Solve times are stable across scenario realizations and compatible with day-ahead time windows on the tested benchmark instances.

0.21

Enrichment-Oriented Virtual Screening of Perovskite Solar Cells through Reinforcement Learning

cs.LG ·2026-11-13 ·Yezeyuan Zheng, Ziyang Hu, Maojun Sun. Ruijian Han, Jian Huang, Guanhua Chen +1 more
similarity 0.59
Abstract · 55 pages, 9 figures

Experimental optimization of perovskite solar cells is constrained by combinatorial diversity in absorber compositions, device layers, and processing, which makes virtual screening attractive for prioritizing recipes before fabrication. We develop a surrogate-guided reinforcement-learning framework that casts recipe generation as virtual screening, enriching candidate shortlists near high-performing experimental neighbors. A frozen Tabular Prior-data Fitted Network (TabPFN) guides recipe generation, while a reference pool of 890 measured devices enables neighborhood-based assessment. Five-fold evaluation on 1,846 devices shows top-ten selection raises mean power conversion efficiency (PCE) from 19.68\% to 23.74\%. Three learned policies are compared with six baselines under 3,000 surrogate evaluations per run. In top-100 shortlists, Proximal policy optimization (PPO) and recurrent PPO (RPPO) achieve neighborhood-supported hit rates of 23\% and 24\% (7.9- and 8.3-fold Pure Random's 2.9\%), versus 10\% (3.4-fold) for the baselines with the highest supported hit rate (L-SHADE and Ax BO, tied) at $K = 100$. Gains coexist with weak-support fractions. Of 9,000 recipes, 65.4\% match a composition family at similarity 0.80, falling to 11.7\% at 0.90. Results support enrichment-oriented prioritization but not experimental performance, seed robustness, or matched-budget advantage.

0.20

A Novel Multi-fidelity Surrogate for Efficient Turbine Design Optimization

cs.CE physics.flu-dyn ·2026-09-10 ·Qineng Wang, Liming Song, Zhendong Guo, Jun Li, Zhenping Feng
publishedhighly cited similarity 0.57
Abstract · Journal author manuscript; 12 pages, 13 figures. Related conference article: DOI 10.1115/GT2023-104237

To solve the turbine design optimization problems efficiently, surrogate-based optimization (SBO) algorithms are frequently used. To further reduce the cost of turbine design, the multi-fidelity surrogate (MFS) based optimization is proposed by the researchers, who resort to augmenting the small number of expensive high-fidelity (HF) samples by a large portion of low-fidelity (LF) but cheap samples in surrogate modeling and optimization process. Nonetheless, according to our observations, the MFS based optimization sometimes can only have better convergence rate at the early stage of optimization process, but yielding worse final solution than the single-fidelity surrogate (SFS) based optimization that uses high-fidelity samples alone. The reason behind can be explained as follows. With the increase of HF samples in the optimization process, the LF samples can cause negative effect and therefore misleading the optimization search. To address the above issue, an ensemble weighted multi-fidelity surrogate (EMFS) is proposed. Specifically, the density-based spatial clustering of applications with noise (DBSCAN) is used to detect the region where the MFS cannot build a more accurate surrogate, and a local SFS is built there. Then, an EMFS is built by combining the MFS and SFS with adaptive weights, which is used to guide the optimization process. The related algorithm is named as multi- and single-fidelity surrogate fused optimization, i.e., MSFO. Through tests on GE-E3 blade optimization and the film cooling layout design of a turbine endwall, the effectiveness of proposed MSFO is well demonstrated.

0.75

Comparative Evaluation of MILP, MPC, and Reinforcement Learning for Commercial Battery Dispatch Under Time-of-Use Tariffs

eess.SY ·2026-09-13 ·Hafiz Majid Hussain, Wajiha Samar, Lurian Klein, Pedro Nardelli
benchmark similarity 0.57
Abstract

Battery energy storage systems (BESS) paired with rooftop photovoltaics (PVs) can deliver measurable cost savings under time-of-use (TOU) electricity tariffs; however, the relative performance of model-based and model-free dispatch strategies remains insufficiently benchmarked on full-year, real-world commercial datasets. This paper presents a full-year (2023) comparative evaluation of three BESS dispatch approaches using data from a commercial PV installation operating under a TOU tariff. The examined strategies include: (i) a mixed-integer linear programming (MILP) formulation with perfect foresight, providing an oracle performance benchmark under the assumed model; (ii) a model predictive control (MPC) scheme based on a day-ahead persistence forecast, representing a low-complexity deployable approach; and (iii) a soft actor-critic (SAC) deep reinforcement learning agent trained under causal information constraints. The MILP benchmark achieves an annual cost reduction of 24.6\% relative to a no-storage baseline. The persistence-based MPC approach recovers 99.2\% of this benchmark using only prior-day data. In contrast, the evaluated SAC agent yields an annual cost higher than the no-storage baseline. This outcome is analyzed in the context of known challenges in reinforcement learning for energy systems, including limited observability and reward design. Overall, the results indicate that, for the studied dataset and tariff structure, persistence-based MPC captures nearly all achievable economic benefits under practical deployment constraints, whereas the considered RL configuration does not yield competitive performance under the same information limitations.

0.21

Timescale-aware surrogate-assisted multi-objective optimization of battery cell design for energy density, fast charging, and degradation

eess.SY ·2026-09-07 ·Qingbo Zhu, Changfu Zou, Yicun Huang, Chunqiu Xia, Torsten Wik
similarity 0.56
Abstract

Battery cell design must balance energy density, fast charging, and degradation, yet these metrics evolve over different time scales and are costly to optimize jointly. We develop a timescale-aware surrogate-assisted framework that evaluates beginning-of-life volumetric energy density and 10--80% charging time together with state-of-health (SOH) loss over 200 cycles. Physics-based simulations of 1501 cell designs generate 1427 quality-controlled samples across 12 manufacturing-relevant parameters. Objective-specific surrogates support total-order Sobol analysis, which reveals distinct parameter rankings across the three metrics. A cross-objective rank-union strategy then retains variables influential to at least one objective before evolutionary Pareto optimization. Re-evaluation of the optimized candidates using the original physics-based models confirms designs that outperform the reference cell in all three metrics. Among these jointly improving candidates, the objective-wise best solutions, attained by different designs, can reduce SOH loss by 99.31%, increase volumetric energy density by 12.49%, and shorten charging time by 28.73%. The framework makes Pareto exploration across disparate electrochemical timescales computationally tractable, thereby enabling systematic multi-objective optimization of battery cell design.

0.35

Adaptive Sequential Test Planning for Multi-Mechanism Reliability Qualification via Bayesian Monte Carlo Tree Search

cs.AI eess.SY ·2026-08-10 ·Youssef A. Elhagrasy, Ian Hill, André Ivanov
top venue similarity 0.56
Abstract · Accepted to IEEE Transactions on Reliability

Reliability qualification of advanced semiconductor devices requires sequential stress decisions that balance characterization objectives against multiple competing failure mechanisms. Current practice relies on static test plans derived from population-level acceleration models, which cannot adapt to per-unit variability or real-time degradation observations. This paper presents a closed-loop adaptive test planning framework that formulates reliability qualification as a partially observable sequential decision problem and solves it using Monte Carlo tree search for seed-action simulators (MCTS-SA) coupled with extended Kalman filter (EKF) belief-state estimation. The framework models stochastic, per-device variability in bias temperature instability (BTI), electromigration (EM), and time-dependent dielectric breakdown (TDDB), and treats stress selection as a constrained sequential optimization, i.e., to maximize the probability of successful degradation characterization while respecting catastrophic failure constraints. Under the experimental assumptions used here (discrete stress actions, proxy damage observability, and cumulative degradation without recovery), we believe this to be a novel application of tree-search-based adaptive test planning to multi-mechanism reliability qualification. Across 5,000 planning iterations, the characterization yield (CY) improves from 20% in the first 500 iterations to over 54% in the final 500, with 39% cumulative success, while the best successful test sequence terminates with EM and TDDB damage fractions DEM=0.564 and DTDDB=0.537, well within safety margins. These results demonstrate that sequential Bayesian planning can synthesize damage-aware test policies that significantly outperform non-adaptive strategies for reliability qualification under competing failure modes.

0.35

CMDO: A Cognitive Memory-Driven Optimization Algorithm for Adaptive Population-Based Search

cs.NE cs.AI ·2026-09-28 ·Mohammed Yusuf Mujawar, Shahram Rahimi, Noorbakhsh Amiri Golilarz
similarity 0.55
Abstract

Population-based optimization methods often use previous search information through successful solutions, parameter adaptation, or operator performance, but they rarely retain the context in which a search behavior succeeded or failed. We introduce Cognitive Memory-Driven Optimization (CMDO), a derivative-free population-based optimizer that represents experience as the relationship between search context, search behavior, and observed outcome. CMDO organizes these experiences across working, episodic, and consolidated memory, retrieves them according to similarity with the current search state, and uses both positive and negative evidence to guide subsequent search. Retrieved experience does not replay previous candidate locations; instead, it selects search recipes that are reconstructed from the current population through exploratory, directed, and local search behaviors with adaptive search geometry. We evaluate CMDO on selected Blackbox Optimization Benchmarking test suite on COCO (BBOB/COCO) and Congress on Evolutionary Computation 2017 (CEC2017) problems against DE, CMA-ES, SHADE, GWO, HHO, and ORCA, and further study its application to seven-parameter photovoltaic model estimation using measured current--voltage data. The results show problem-dependent but competitive optimization performance, including the lowest median error among the compared methods on CEC2017 F10. More importantly, analysis of the search traces shows that context-dependent recall changes the distribution of executed search behaviors, while unsuccessful experiences remain available as negative evidence for later decisions, showing that accumulated experience directly influences subsequent search behavior. These results support the use of explicit context--behavior--outcome memory as an active mechanism for controlling population-based search.

0.22

PowerModels-ACOPF-AI: On-the-Fly Machine Learning Approach for Solving AC Optimal Power Flow Integrating Renewable Energy Sources

eess.SY ·2026-09-16 ·Bhuban Dhamala, Jose Tabarez, Anup Pandey
benchmark similarity 0.55
Abstract

The increasing complexity of modern power systems, driven by high renewable penetration, load variability, and operational uncertainty, demands fast and reliable solutions to the AC optimal power flow problem (AC-OPF). Traditional optimization methods, though accurate, often struggle with scalability and high computational burdens, making them impractical for real-time use in large networks. This paper introduces PowerModels-ACOPF-AI, a two-stage Bayesian Neural Network (BNN) surrogate designed to predict generator set points, bus voltages, and phase angles with uncertainty. The framework integrates a performance-sensitive on-the-fly learning mechanism that identifies regions of degraded prediction accuracy and dynamically retrains with additional AC-OPF solutions generated by PowerModels.jl. This self-adaptive loop ensures robust performance, enabling the model to maintain accuracy under novel or highly variable operating conditions. Validation on benchmark test systems of different sizes, namely the 30-bus, 200-bus, and 500-bus networks, demonstrates strong generalization capability, efficient handling of stochastic renewable injections, and the ability to provide rapid, uncertainty-aware predictions. Beyond predictive accuracy, the proposed approach offers practical value as both a real-time advisory tool for system operators and a fast initializer for conventional solvers, thus supporting resilient and efficient grid operation in future power systems.

0.16