CS Paper Radar

Enrichment-Oriented Virtual Screening of Perovskite Solar Cells through Reinforcement Learning

Yezeyuan Zheng, Ziyang Hu, Maojun Sun. Ruijian Han, Jian Huang, Guanhua Chen, Jie Liu

cs.LG ·submitted 2026-11-13 11:13 UTC · v1

Abstract

Experimental optimization of perovskite solar cells is constrained by combinatorial diversity in absorber compositions, device layers, and processing, which makes virtual screening attractive for prioritizing recipes before fabrication. We develop a surrogate-guided reinforcement-learning framework that casts recipe generation as virtual screening, enriching candidate shortlists near high-performing experimental neighbors. A frozen Tabular Prior-data Fitted Network (TabPFN) guides recipe generation, while a reference pool of 890 measured devices enables neighborhood-based assessment. Five-fold evaluation on 1,846 devices shows top-ten selection raises mean power conversion efficiency (PCE) from 19.68\% to 23.74\%. Three learned policies are compared with six baselines under 3,000 surrogate evaluations per run. In top-100 shortlists, Proximal policy optimization (PPO) and recurrent PPO (RPPO) achieve neighborhood-supported hit rates of 23\% and 24\% (7.9- and 8.3-fold Pure Random's 2.9\%), versus 10\% (3.4-fold) for the baselines with the highest supported hit rate (L-SHADE and Ax BO, tied) at $K = 100$. Gains coexist with weak-support fractions. Of 9,000 recipes, 65.4\% match a composition family at similarity 0.80, falling to 11.7\% at 0.90. Results support enrichment-oriented prioritization but not experimental performance, seed robustness, or matched-budget advantage.

Comment
55 pages, 9 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Provenance-grouped protocol for evaluating machine learning in perovskite photovoltaics

cs.LG ·2026-10-08 ·Qiwei Han, Chi Zhou
similarity 0.66
Abstract · perovskite solar cells, provenance-grouped protocol, state of art, benchmark

Machine-learning models for perovskite solar cells are typically evaluated using random data splits, which we show systematically leak information through massive internal duplication. Because nearly two-thirds of curated devices share their exact recipe with another, random splits primarily reward the mere recall of historical data rather than testing true physical generalisation. To solve this, we mapped the institutional provenance of the Perovskite Database and established a rigorous hierarchy of grouped splits that progressively isolate duplicate devices, publications, and institutions. Benchmarking thirteen models establishes new state-of-the-art performance across all splits and reveals a critical regime shift: while tree ensembles dominate random splits by recognising familiar recipes, their ranking collapses on genuinely unseen institutions and future discoveries, where composition-aware neural architectures excel. Furthermore, feature importance demonstrates that the device architecture and fabrication methodology dictate final efficiency just as strongly as the absorber chemistry. This standardised protocol empowers the community to separate memorisation from true physical discovery.

0.54

Evidence-grounded large language models guide perovskite solar cell design and optimization

cs.AI ·2026-10-31 ·YanKai Chen, Zhi Wan, ZiHao Li, Tao Jing
benchmark similarity 0.66
Abstract · 67 pages: 18-page main manuscript with 4 figures, plus 49-page Supplementary Information with 24 figures and 3 tables

Using large language models to interpret experimental evidence, design discriminating experiments and formulate well-supported mechanistic explanations remains a central challenge in materials research. Here we establish PSM-Bench, an 800-question benchmark developed by perovskite researchers to evaluate scientific reasoning in perovskite photovoltaics. We also introduce OpenPerov, an expert-informed language-model framework that learns from expert-calibrated evidence records reconstructed from 4,035 training articles; these records link experimental strategies, controls and observations to mechanistic interpretations. Structured-evidence adaptation outperformed conventional question-answer training, and OpenPerov Flash ranked first among 13 closed-book systems. OpenPerov Pro raised Scientific Mastery further, from 87.6 to 89.1, by revising selected passages with retrieved evidence. On questions derived from subsequent studies, both models also outscored expert-authored answers. In an experimental test of self-assembled monolayer design, OpenPerov selected a K analogue that outperformed the Na analogue preferred by experts. Devices incorporating the selected contact reached a power conversion efficiency of 27.05% and retained 96.74% of their initial efficiency after 1,000 h of dark thermal ageing at 85 $^\circ$C. These results show that reconstructed scientific reasoning provides an effective basis for building domain models that interpret experiments and inform materials design.

0.25

Virtual-Alloy Physics-Aware Semantic System for extrapolative prediction of perovskite solar cells

cs.LG cond-mat.mtrl-sci ·2026-10-13 ·Qiwei Han, Chi Zhou
benchmark similarity 0.62
Abstract · 22 pages, 4 figures, 16 tables; Supporting Information included

Existing machine-learning models for perovskite solar cells struggle to predict devices made from new materials. Most treat device layers as arbitrary categorical labels and represent perovskite absorbers either through featureless composition vectors or through rigid crystal graphs that require a pre-solved unit cell. As a result, they cannot generalize to unrecorded alloys or unfamiliar cell architectures. We present the Virtual-Alloy Physics-Aware Semantic System (V-PaSS), an architecture built around the physical continuity of perovskite solid solutions. V-PaSS represents arbitrary mixed-cation, mixed-halide absorbers by interpolating relaxed crystal graphs of 23 pure $ABX_3$ endpoint compounds via Vegard's law with learned bandgap bowing. For the device stack, it couples layer sequence and cell polarity (n-i-p or p-i-n) with interfacial band offsets and encodes chemical descriptions with a scientific language model. Evaluated under an institution-grouped protocol where test devices come exclusively from unseen laboratories, an untuned default configuration of V-PaSS achieves the lowest error among fourteen tested models (2.861% MAE, a 5.2% relative reduction over a gradient-boosted baseline at 3.017%, and outperforming the best tuned benchmark at 2.912%). V-PaSS pulls furthest ahead where test devices differ most from training: reducing error by 15.7-19.0% on unseen absorber alloys, by 16.1% on mixed absorbers from new laboratories, and widening its lead over the baseline by 3.6$\times$ on devices with unobserved transport layers. Combined with tree ensembles, V-PaSS sets a new state of the art across all five benchmark splits.

0.22

Interpretable machine learning diagnosis of degradation mechanisms in lead-free $RbSn_{0.5}Ge_{0.5}I_{3}$ solar cells from temperature- and illumination-dependent electrical measurements

cs.LG math-ph ·2026-11-12 ·Nabanita Sarker, Hafiz Imtiaz
similarity 0.60
Abstract · Under review in RSC Advances

Machine learning coupled with device simulation is widely used to optimize thin-film solar cells, but almost exclusively in the forward direction, from device parameters to predicted performance. The inverse problem encountered after fabrication, namely identifying the mechanism that limits a given device, is still addressed by manual inspection of characterization data. In this work, both directions are examined for lead-free $RbSn_{0.5}Ge_{0.5}I_{3}$ solar cells using approximately 42,000 SCAPS-1D simulations. Replacing the Spiro-OMeTAD hole transport layer with CuI increases the simulated power conversion efficiency from 19.6\% to 21.6\%, almost entirely through the fill factor. Surrogate models trained and tested on a factorial parameter grid substantially overstate their predictive accuracy. An XGBoost regressor attains $R^2 = 0.9997$ on held-out grid points but only 0.58 on independently sampled devices, whereas training on a Latin hypercube design of comparable size restores $R^2 = 0.995$. For the inverse problem, a multi-label classifier identifies which of six degradation mechanisms are present from simulated temperature- and illumination-dependent open-circuit-voltage measurements. It achieves a macro $F_1$ score of 0.938, compared to 0.687 for a calibrated physics-rule baseline. The classifier does not, however, generalize to combinations of mechanisms absent from the training set.

0.37

Parameter Exploration for RLVR via Variational Learning

cs.LG cs.AIcs.CL ·2026-08-10 ·Vatsal Venkatkrishna, Nico Carlsen Daheim, Iryna Gurevych
top venue similarity 0.60
Abstract · Accepted at the NeurIPS 2026

Exploration has been a focus of reinforcement learning research for a long time. Recently, there has been growing evidence that it is also an important ingredient in LLM reinforcement learning recipes that can significantly impact downstream performance. Many existing methods control exploration in the action-space, for example, using temperature scaling. However, these methods cannot reorder tokens but only influence the variance in the output distribution. This limits exploration and can lead to divergence or stalled training. Here, we investigate parameter-space exploration, where rollouts are generated by sampling different policies from a posterior that may each explore different rollouts. Sampling less or more diverse policies is then a complementary control lever over exploration. We introduce a family of methods called Perturbed Parameter Policy Optimization (3PO) which use different sampling strategies and different rollout grouping for reward estimation. Experiments on Olmo-3-1025-7B and Qwen2.5-Math-7B across mathematical reasoning and code generation tasks show that these approaches can improve the average downstream performance over standard GRPO at a near-identical FLOPs cost. Moreover, using multiple parameter samples generally produces fewer zero-advantage groups and malformed or incorrect rollouts during training than GRPO and action-space baselines. Overall, our work presents evidence that parameter-space exploration can improve reinforcement learning for LLMs.

0.61

Decision-Gated Surrogate-Assisted Stochastic Optimization with Independent High-Fidelity Certification for Photovoltaic Hosting-Capacity Planning

eess.SY ·2026-09-25 ·Ali Abubakar, Samuel Essamuah Assabil, Akhtar Hussain, Van-Hai Bui
similarity 0.59
Abstract · 17 pages

High photovoltaic (PV) penetration planning requires repeated nonlinear PV and power-flow evaluations under uncertain irradiance and demand, particularly when two competing objectives, penetration and total electrical loss, are optimized simultaneously subject to reliability constraints. This paper develops a decision-focused, surrogate-assisted stochastic multiobjective framework in which a calibrated PV model coupled with a distribution-network simulator provides the high-fidelity reference, while matched data-only and physics-informed surrogates accelerate optimization and are evaluated empirically for decision reliability across the loss-penetration tradeoff. Although the two surrogates exhibit nearly identical held-out errors, optimizer-realistic screening yields markedly different operational validity rates of 44.4% and 93.4%, respectively, motivating selection of the physics-informed model on decision performance rather than test accuracy. Surrogate inference cuts the cost of a 60-scenario design evaluation from 286.0 to 0.46 ms, an approximately 620 time speedup. A decision-gated enrichment strategy further targets Pareto-critical, constraint boundary, and surrogate-disagreement regions, reducing prediction error by 39.1%. Independent 500 scenario certification verifies all 80 screened candidates and identifies 46 non-dominated designs; the selected compromise attains 70.74% expected penetration with 297.9 kW expected total electrical loss. Cross-feeder transfer eliminates baseline voltage violations on the 85- and 69-bus systems, but produces overvoltage and a 62.7% increase in feeder-network loss on the 33-bus system, demonstrating that certified penetration is topology-specific and demands decision-level auditing, independent certification, and feeder-specific validation.

0.24

Reinforcement Learning for Sequential Solar PV Policy Design under Uncertainty: An Agent-Based Approach

cs.AI ·2026-09-04 ·Iias Faiud, Jonaid Shianifar, Michael Schukat, Karl Mason
published similarity 0.57
Abstract

Designing effective and fiscally sustainable policies for solar photovoltaic (PV) adoption requires balancing adoption gains against public expenditure under uncertainty and heterogeneous decision-making. This study formulates PV policy design as a sequential decision problem and integrates reinforcement learning (RL) with a stochastic agent-based model (ABM) that simulates yearly solar PV adoption under uncertainty. A policymaker agent selects annual incentives, including capital grants, subsidised loan rates, and feed-in tariffs, over a 16-year horizon. Adoption--cost trade-offs are explored by varying policy preferences within a scalarised reward framework. Policies are learned using PPO, SAC, and TD3 and evaluated under stochastic simulation. The results show that this approach produces a clear trade-off structure: the highest-adoption policy (TD3, $w_{\text{cost}}=0.5$) achieves approximately 4,145 adopters at a cost of EUR 41.73 million, while the lowest-cost policy (PPO, $w_{\text{cost}}=2.0$) reduces expenditure to EUR 7.27 million with 2,682 adopters. The balanced policy (PPO, $w_{\text{cost}}=1.6$) achieves 3,495 adopters at a cost of EUR 22.47 million. Across algorithms, consistent trade-off patterns are observed, indicating robustness of the adoption--cost relationship. Compared with static baseline policies, the RL framework explores a broader range of policy configurations. These findings demonstrate the potential of RL as a flexible tool for adaptive policy design under uncertainty.

0.35

CMDO: A Cognitive Memory-Driven Optimization Algorithm for Adaptive Population-Based Search

cs.NE cs.AI ·2026-09-28 ·Mohammed Yusuf Mujawar, Shahram Rahimi, Noorbakhsh Amiri Golilarz
similarity 0.57
Abstract

Population-based optimization methods often use previous search information through successful solutions, parameter adaptation, or operator performance, but they rarely retain the context in which a search behavior succeeded or failed. We introduce Cognitive Memory-Driven Optimization (CMDO), a derivative-free population-based optimizer that represents experience as the relationship between search context, search behavior, and observed outcome. CMDO organizes these experiences across working, episodic, and consolidated memory, retrieves them according to similarity with the current search state, and uses both positive and negative evidence to guide subsequent search. Retrieved experience does not replay previous candidate locations; instead, it selects search recipes that are reconstructed from the current population through exploratory, directed, and local search behaviors with adaptive search geometry. We evaluate CMDO on selected Blackbox Optimization Benchmarking test suite on COCO (BBOB/COCO) and Congress on Evolutionary Computation 2017 (CEC2017) problems against DE, CMA-ES, SHADE, GWO, HHO, and ORCA, and further study its application to seven-parameter photovoltaic model estimation using measured current--voltage data. The results show problem-dependent but competitive optimization performance, including the lowest median error among the compared methods on CEC2017 F10. More importantly, analysis of the search traces shows that context-dependent recall changes the distribution of executed search behaviors, while unsuccessful experiences remain available as negative evidence for later decisions, showing that accumulated experience directly influences subsequent search behavior. These results support the use of explicit context--behavior--outcome memory as an active mechanism for controlling population-based search.

0.22