CS Paper Radar

Interpretable machine learning diagnosis of degradation mechanisms in lead-free $RbSn_{0.5}Ge_{0.5}I_{3}$ solar cells from temperature- and illumination-dependent electrical measurements

Nabanita Sarker, Hafiz Imtiaz

cs.LG math-ph ·submitted 2026-11-12 13:03 UTC · v1

Abstract

Machine learning coupled with device simulation is widely used to optimize thin-film solar cells, but almost exclusively in the forward direction, from device parameters to predicted performance. The inverse problem encountered after fabrication, namely identifying the mechanism that limits a given device, is still addressed by manual inspection of characterization data. In this work, both directions are examined for lead-free $RbSn_{0.5}Ge_{0.5}I_{3}$ solar cells using approximately 42,000 SCAPS-1D simulations. Replacing the Spiro-OMeTAD hole transport layer with CuI increases the simulated power conversion efficiency from 19.6\% to 21.6\%, almost entirely through the fill factor. Surrogate models trained and tested on a factorial parameter grid substantially overstate their predictive accuracy. An XGBoost regressor attains $R^2 = 0.9997$ on held-out grid points but only 0.58 on independently sampled devices, whereas training on a Latin hypercube design of comparable size restores $R^2 = 0.995$. For the inverse problem, a multi-label classifier identifies which of six degradation mechanisms are present from simulated temperature- and illumination-dependent open-circuit-voltage measurements. It achieves a macro $F_1$ score of 0.938, compared to 0.687 for a calibrated physics-rule baseline. The classifier does not, however, generalize to combinations of mechanisms absent from the training set.

Comment
Under review in RSC Advances

Closest papers

Nearest neighbours by meaning across the whole index.

Enrichment-Oriented Virtual Screening of Perovskite Solar Cells through Reinforcement Learning

cs.LG ·2026-11-13 ·Yezeyuan Zheng, Ziyang Hu, Maojun Sun. Ruijian Han, Jian Huang, Guanhua Chen +1 more
similarity 0.60
Abstract · 55 pages, 9 figures

Experimental optimization of perovskite solar cells is constrained by combinatorial diversity in absorber compositions, device layers, and processing, which makes virtual screening attractive for prioritizing recipes before fabrication. We develop a surrogate-guided reinforcement-learning framework that casts recipe generation as virtual screening, enriching candidate shortlists near high-performing experimental neighbors. A frozen Tabular Prior-data Fitted Network (TabPFN) guides recipe generation, while a reference pool of 890 measured devices enables neighborhood-based assessment. Five-fold evaluation on 1,846 devices shows top-ten selection raises mean power conversion efficiency (PCE) from 19.68\% to 23.74\%. Three learned policies are compared with six baselines under 3,000 surrogate evaluations per run. In top-100 shortlists, Proximal policy optimization (PPO) and recurrent PPO (RPPO) achieve neighborhood-supported hit rates of 23\% and 24\% (7.9- and 8.3-fold Pure Random's 2.9\%), versus 10\% (3.4-fold) for the baselines with the highest supported hit rate (L-SHADE and Ax BO, tied) at $K = 100$. Gains coexist with weak-support fractions. Of 9,000 recipes, 65.4\% match a composition family at similarity 0.80, falling to 11.7\% at 0.90. Results support enrichment-oriented prioritization but not experimental performance, seed robustness, or matched-budget advantage.

0.20

Provenance-grouped protocol for evaluating machine learning in perovskite photovoltaics

cs.LG ·2026-10-08 ·Qiwei Han, Chi Zhou
similarity 0.55
Abstract · perovskite solar cells, provenance-grouped protocol, state of art, benchmark

Machine-learning models for perovskite solar cells are typically evaluated using random data splits, which we show systematically leak information through massive internal duplication. Because nearly two-thirds of curated devices share their exact recipe with another, random splits primarily reward the mere recall of historical data rather than testing true physical generalisation. To solve this, we mapped the institutional provenance of the Perovskite Database and established a rigorous hierarchy of grouped splits that progressively isolate duplicate devices, publications, and institutions. Benchmarking thirteen models establishes new state-of-the-art performance across all splits and reveals a critical regime shift: while tree ensembles dominate random splits by recognising familiar recipes, their ranking collapses on genuinely unseen institutions and future discoveries, where composition-aware neural architectures excel. Furthermore, feature importance demonstrates that the device architecture and fabrication methodology dictate final efficiency just as strongly as the absorber chemistry. This standardised protocol empowers the community to separate memorisation from true physical discovery.

0.53

Energy Yield and Lifetime Climate Classification via Machine Learning for Optimizing Photovoltaic Module Design and Materials

cs.LG physics.comp-ph ·2026-08-26 ·Youri Blom, Sofia Dutto, Alexandru Costache, Rowan Richie, Ruben Pelsser +5 more
similarity 0.54
Abstract · 16 pages, 8 figures. Manuscript is submitted to Progress in Photovoltaics

To resiliently and sustainably meet our future energy demand, photovoltaic (PV) modules must be deployed across a broad and diverse range of geographical regions with varying operating conditions. As these conditions strongly affect both performance and optimal system design, a dedicated PV-specific climate classification can be of great use. In this work, we develop a climate classification framework tailored to PV applications using a variety of machine learning (ML) techniques. Building on previous studies, our approach incorporates both energy yield, and for the first time, also the module lifetime with climate dependent degradation. We generate an interpolated dataset containing twelve input features and two target variables (i.e. energy yield and module lifetime). Feature importance analysis shows that annual global horizontal irradiation and ambient temperature are the most influential predictors. The most accurate regression model achieves root mean square errors (RMSE) of 0.007 MWh for energy yield and 1.5 years for lifetime prediction. The calculated feature importance scores are then integrated into a hierarchical clustering framework, resulting in 6 primary climate clusters (Tropical, Desert, Continental, Temperate, Boreal, and Polar) and 15 corresponding subclusters. Our analysis shows that the low temperature continental climate offers the highest discounted lifetime energy yield. These results can support a wide range of applications, including PV module optimization, system siting decisions, and comparative performance studies.

0.23

Benchmarking Classical Machine Learning Models for Shading-Fault Detection in Rooftop Photovoltaic Systems Using Real Sensor Data

cs.LG eess.SY ·2026-10-31 ·Zablon Ombiro, Bernard Shibwabo
similarity 0.54
Abstract · 17 pages, 4 figures

Most published comparisons of machine-learning classifiers for photovoltaic (PV) fault detection are validated on simulated faults. We compare seven classical and ensemble-tree classifiers on the Réunion dataset, a 4 kW domestic rooftop plant on which shading faults were physically staged and logged. Readings within a staged episode are near-duplicates, so every train/test split is grouped by episode. A 20,800-row subsample that retains all 17 fault episodes was evaluated with three repeats of five-fold group-aware nested cross-validation, with synthetic minority oversampling (SMOTE) applied inside the training folds. Random Forest and XGBoost gave the highest mean accuracy (0.838 and 0.831) and Matthews correlation coefficient (MCC; 0.526 and 0.522). After Holm correction across the 21 pairwise Wilcoxon tests, only Random Forest's accuracy advantage over k-nearest neighbours and the multi-layer perceptron remained significant. Logistic Regression and the Decision Tree (accuracy 0.820) could be separated neither from the ensembles nor from the weakest models. SMOTE lowered binary MCC for six of the seven classifiers. Errors were concentrated in whole episodes: the Random Forest almost entirely missed four of the 17 fault episodes, including one of two uniform-shading and two of five intermittent-shading episodes. A post-hoc diagnostic shows that the no-fault rows were sampled over a wider range of times of day and output levels than the fault rows. Clock time alone reaches an MCC of 0.44, and PV-side voltage alone 0.72. The reported scores therefore reflect operating-condition differences as well as shading signatures. We release the pipeline and the diagnostics, and identify matched no-fault sampling as the step needed before the classifier ranking can be generalised.

0.27

Explainable AI for Solar PV Power Forecasting: From Model Selection to Trustworthy, Reproducible Deployment

cs.AI ·2026-11-19 ·Nuzhat Khan, Muhammad Paend Bakht, Ab Al-Hadi Ab Rahman, Fabiano Pallonetto, Amy Fahy +5 more
similarity 0.54
Abstract · 24 pages, 8 figures, 6 tables. Code and results available from the corresponding author on request

Machine learning (ML) is now a standard tool for forecasting the output of solar photovoltaic (PV) plants, yet published accuracy figures are often hard to compare and harder to trust. Many studies validate with random splits, report no reference forecast, and present feature attributions without saying what they can and cannot show. This paper reviews the main families of ML methods for PV power forecasting and resource assessment, from tree ensembles to deep and foundation models, and sets out a reproducible workflow that combines automated model search with explainable AI. The workflow is then tested on an openly available dataset: a 16.32 kWp plant in Porto, Portugal, forecast one day ahead from a 4 km numerical weather prediction grid. Over a full test year, the best models reach a normalised root mean square error (nRMSE) of 11.6% of installed capacity, about half the error of smart persistence. The choice of input features changed accuracy far more than the choice among strong algorithms, and shuffled cross-validation was mildly optimistic. After conformal calibration, the nominal 80% prediction intervals covered 81.7% of observations, against 64.5% before. SHAP rankings stayed stable when the model was retrained on different periods but shifted when correlated inputs were removed, so attributions should be read as properties of a model rather than of the plant. The paper closes with practical lessons and open problems, including deployment on edge hardware and the effect of a changing climate.

0.24

Evidence-grounded large language models guide perovskite solar cell design and optimization

cs.AI ·2026-10-31 ·YanKai Chen, Zhi Wan, ZiHao Li, Tao Jing
benchmark similarity 0.54
Abstract · 67 pages: 18-page main manuscript with 4 figures, plus 49-page Supplementary Information with 24 figures and 3 tables

Using large language models to interpret experimental evidence, design discriminating experiments and formulate well-supported mechanistic explanations remains a central challenge in materials research. Here we establish PSM-Bench, an 800-question benchmark developed by perovskite researchers to evaluate scientific reasoning in perovskite photovoltaics. We also introduce OpenPerov, an expert-informed language-model framework that learns from expert-calibrated evidence records reconstructed from 4,035 training articles; these records link experimental strategies, controls and observations to mechanistic interpretations. Structured-evidence adaptation outperformed conventional question-answer training, and OpenPerov Flash ranked first among 13 closed-book systems. OpenPerov Pro raised Scientific Mastery further, from 87.6 to 89.1, by revising selected passages with retrieved evidence. On questions derived from subsequent studies, both models also outscored expert-authored answers. In an experimental test of self-assembled monolayer design, OpenPerov selected a K analogue that outperformed the Na analogue preferred by experts. Devices incorporating the selected contact reached a power conversion efficiency of 27.05% and retained 96.74% of their initial efficiency after 1,000 h of dark thermal ageing at 85 $^\circ$C. These results show that reconstructed scientific reasoning provides an effective basis for building domain models that interpret experiments and inform materials design.

0.25

Virtual-Alloy Physics-Aware Semantic System for extrapolative prediction of perovskite solar cells

cs.LG cond-mat.mtrl-sci ·2026-10-13 ·Qiwei Han, Chi Zhou
benchmark similarity 0.53
Abstract · 22 pages, 4 figures, 16 tables; Supporting Information included

Existing machine-learning models for perovskite solar cells struggle to predict devices made from new materials. Most treat device layers as arbitrary categorical labels and represent perovskite absorbers either through featureless composition vectors or through rigid crystal graphs that require a pre-solved unit cell. As a result, they cannot generalize to unrecorded alloys or unfamiliar cell architectures. We present the Virtual-Alloy Physics-Aware Semantic System (V-PaSS), an architecture built around the physical continuity of perovskite solid solutions. V-PaSS represents arbitrary mixed-cation, mixed-halide absorbers by interpolating relaxed crystal graphs of 23 pure $ABX_3$ endpoint compounds via Vegard's law with learned bandgap bowing. For the device stack, it couples layer sequence and cell polarity (n-i-p or p-i-n) with interfacial band offsets and encodes chemical descriptions with a scientific language model. Evaluated under an institution-grouped protocol where test devices come exclusively from unseen laboratories, an untuned default configuration of V-PaSS achieves the lowest error among fourteen tested models (2.861% MAE, a 5.2% relative reduction over a gradient-boosted baseline at 3.017%, and outperforming the best tuned benchmark at 2.912%). V-PaSS pulls furthest ahead where test devices differ most from training: reducing error by 15.7-19.0% on unseen absorber alloys, by 16.1% on mixed absorbers from new laboratories, and widening its lead over the baseline by 3.6$\times$ on devices with unobserved transport layers. Combined with tree ensembles, V-PaSS sets a new state of the art across all five benchmark splits.

0.22

Explainable Machine Learning for Multilayer Planar Winding Inductance Estimation

cs.LG ·2026-09-29 ·Spyros Rigas, Theofilos Papadopoulos, Georgios Alexandridis, Antonios Antonopoulos
code/data similarity 0.53
Abstract · 10 pages

Rapid and accurate self-inductance estimation for multilayer rectangle-shaped planar windings is essential for modern high-frequency power converters, yet traditional workflows rely on complex mathematical equations, rigid monomial formulas or unexplainable black-box machine learning (ML) models that degrade severely outside their training domain. This paper introduces an explainable ML framework unifying post-hoc feature attribution (SHAP and permutation importance) with Kolmogorov-Arnold Network-guided symbolic regression via the SR-KAN framework to discover closed-form analytical equations without prior structural assumptions. Evaluated on a new open-source dataset of over 10,000 Finite Element Analysis (FEA) simulations across seven out-of-distribution (OOD) classes, standard tree-based ensembles exhibit severe extrapolation errors (> 36%), whereas the unconstrained SR-KAN expression achieves a robust OOD relative error of 8.22%. Experimental verification across 55 physical printed circuit board prototypes (up to 8 layers, with inductances from 4.11 μH to 559.27 μH) confirms that the KAN-discovered expression translates effectively to real-world hardware, predicting inductance with a mean absolute relative error of 6.26%. To support reproducible research, the complete FEA simulation dataset and prototype measurements are released open-source.

0.37