CS Paper Radar

Cold-Atom Rydberg Array with Spatiotemporal Multiplexing for High-Sensitivity Wireless Communications

Jian Xiao, Tierui Gong, Chau Yuen

cs.IT ·submitted 2026-10-06 02:36 UTC · v2

Abstract

An effective Cold-Atom Rydberg Array (CoRA) architecture is investigated, which addresses the fundamental thermal noise limit in classical electromagnetics and intrinsic Doppler broadening as well as photon shot noise in conventional hot-vapor cell-based atomic receivers. However, translating the CoRA-based quantum electrometers into practical wireless communication receivers is bottlenecked by both the macroscopic readout dead-times and nonlinear binomial population counts rather than the additive-Gaussian baseband samples in conventional receivers. To address these critical challenges and facilitate the practicality of the CoRA, in this paper, a subarray scheduling-based spatiotemporal multiplexing (STM) framework is first proposed for gap-free symbol interrogation within an admitted packet. Additionally, a signal detection scheme based on a joint binomial particle smoother (JBPS) is proposed for burst-wise state and data inference. Furthermore, the weak-signal quantum-projection-noise (QPN) limit and the state-averaged finite-alphabet rate are derived for CoRA-assisted wireless communications. Numerical results demonstrate that: 1) The proposed STM-based CoRA scheme resolves the macroscopic temporal bottleneck for continuous signal sampling; 2) The proposed JBPS approach effectively mitigates the nonlinear noise amplification to achieve a lower bit error rate; and 3) Performance analysis reveals a fundamental sensitivity-sustainability tradeoff that increasing the number of atoms effectively suppresses the QPN, but simultaneously reduces the sustainable packet repetition rate.

Closest papers

Nearest neighbours by meaning across the whole index.

BER-Aware Joint Parameter Optimization of Rydberg Atomic Quantum Receivers

eess.SP ·2026-09-03 ·Akash Kumar Mandal, Ming Shen
similarity 0.69
Abstract

Rydberg-atom quantum receivers (RAQRs) offer highly sensitive RF reception, but their communication performance depends jointly on atomic response, optical transduction, receiver noise, bandwidth, and wireless-channel conditions. This paper develops a BER-aware communication-theoretic framework for superheterodyne RAQR-assisted wireless communication, linking four-level Rydberg-atom dynamics and coherent optical detection to multipath propagation and digital communication performance. Closed-form instantaneous and average SNR and BER expressions are derived for square Gray-coded $M$-QAM over correlated Rayleigh fading. The RAQR operating point is then jointly optimized over atomic, optical, RF, and geometric parameters using analytical block-wise updates within a fixed-point procedure subject to physical and bandwidth constraints. Numerical results demonstrate substantial gains in low-power reception, bandwidth utilization, robustness to detuning, fading and delay spread, outage, and communication coverage compared with conventional, advanced, and fixed-point RAQR receivers. The results demonstrate that BER-aware joint optimization translates the intrinsic sensitivity of Rydberg-atom sensing into tangible communication-level gains.

0.46

A Phase-Balanced Differential Rydberg-Atom Quantum Receiver for Weak GNSS Signal Detection

eess.SP quant-ph ·2026-11-06 ·A. K. Mandal, F. Zhang, J. H. Mikkelsen, M. Shen
similarity 0.65
Abstract · 6 pages, 10 figures, submitted to IEEE ICC 2027 (in review)

This paper proposes a phase-balanced differential Rydberg atomic quantum receiver (DRAQR) for weak-signal recovery, using local-oscillator phase control to reinforce differential signal responses and a shared squeezed-reservoir model to correlate inter-cell quantum projection noise (QPN) and photon shot noise (PSN). An analytical model incorporating QPN, PSN, intrinsic thermal noise (ITN), and inter-cell correlations quantifies signal-to-noise ratio (SNR) gain, outage-constrained minimum detectable power, and bit-error rate (BER) for square $M$-QAM. For the evaluated settings, SNR gain reaches approximately $10$~dB as PSN correlation approaches unity, with BER decreasing as correlation increases. Under Rician fading, at a $0$-dB threshold SNR and maximum outage probability of $0.1$, the minimum detectable power decreases from $-146.95$~dBm at $K=1.155$ to $-159.98$~dBm at $K=2.4$. Analytical results are validated against Monte-Carlo simulations over $150{,}000$ data runs per point for receiver-performance plots.

0.31

A Novel Space-Time Coding Architecture for Rydberg Atomic Quantum Receiver-Based Systems

cs.ET ·2026-09-01 ·Asifa Zannat, Milad Abolpour, Dani Korpi, Mikko A. Uusitalo, Mikko Valkama +1 more
similarity 0.65
Abstract · 5 pages, 3 figures, under review at IEEE

Rydberg atomic quantum receivers (RAQRs) offer high sensitivity and wide tunability, but their magnitude-based readout yields a nonlinear model incompatible with conventional complex-valued multi-input multi-output (MIMO) processing. We propose a low-complexity space-time coding framework for point-to-point RAQR-assisted MIMO links. Data symbols are encoded using real orthogonal designs, while strong-reference heterodyne reception yields an equivalent real-valued linear model. The preserved orthogonality enables matched filter symbol-wise detection without matrix inversion or vector search. An analytical bit error probability expression is derived, proving the proposed scheme achieves the full transmit-receive diversity. Simulations validate the analysis and demonstrate improved performance over spatial multiplexing benchmarks.

0.36

Fundamental CRB-Rate Tradeoff of Rydberg Atomic Receivers for Integrated Sensing and Communication

eess.SP ·2026-10-06 ·Yin Zhang, Jiayi Zhang, Bokai Xu, Jieao Zhu, Bo Ai
similarity 0.61
Abstract

Integrated sensing and communication (ISAC) is a key technology for next generation wireless networks, requiring highly sensitive, compact receiver front ends with multiband coverage. Rydberg atomic receivers (RARs) provide a promising architecture that satisfies these requirements owing to their high sensitivity and continuous frequency tuning capability. Unlike in classical ISAC systems utilizing orthogonal resource allocation, executing concurrent multi band tasks within a single atomic ensemble relies on shared energy state transitions. Owing to this shared structure, the communication and sensing tradeoff in RAR-based ISAC introduces an atomic-response tradeoff beyond the classical subspace and deterministic-random tradeoffs. This paper studies a multi-branch RAR (MB-RAR) architecture for joint communication and radar sensing. By solving the five level Lindblad master equation at the local oscillator (LO) biased operating point and linearizing the communication and sensing radio frequency (RF) signals as small perturbations, we obtain the double-sideband dynamic signal response of the MB-RAR. The model reveals two intrinsic constraints. First, increasing the coupling laser strength broadens the response bandwidth but can weaken the atomic response. Second, strengthening one branch's LO can suppress the other branch's conversion gain through the shared Rydberg state, even when the latter's LO bias remains fixed, which is termed the inter band gain inhibition (IBGI). Based on these mechanisms, we formulate the achievable Cramér--Rao bound (CRB)-rate region and develop a rate-constrained joint search over coupling strength and LO power allocation. Numerical results validate the proposed response model and show that joint optimization provides a more complete characterization of the achievable CRB-rate region.

0.32

An Optical Pathway to Movable Rydberg Atomic Quantum Receivers

eess.AS ·2026-08-31 ·Qihao Peng, Qu Luo, Lixia Xiao, De Mi, Neng Ye +4 more
unusual similarity 0.59
Abstract

This paper develops an optically movable Rydberg atomic quantum receiver (RAQR), in which the probe and coupling beams are steered within each vapor cell to dynamically reconfigure the effective radio-frequency (RF) sensing position without mechanical actuation. A closed-form equivalent baseband model is derived by separating the atomic transduction coefficient, optical steering phase, and cell-center array response into distinct factors and the accuracy of the resulting model is validated against numerical solutions of the Lindblad master equation. Based on the derived model, we reveal two complementary channel-shaping mechanisms, including intrinsic beam-pattern shaping through RF-to-optical transduction and per-cell phase control enabled by optical displacement. To further exploit these capabilities, a non-convex sum-rate maximization problem is formulated over the optical positions and local oscillator design and solved via an alternating optimization framework with analytical gradients. Simulation results validate the derived model and demonstrate substantial performance gains enabled by optical movability, highlighting its potential as a programmable receiver architecture for future wireless networks.

0.39

Rydberg Atomic Quantum Receivers for OFDM Systems: An Atomic-Comb Design

cs.IT physics.atom-phquant-ph ·2026-10-11 ·Yuanbin Chen, Chong Meng Samson See, Chau Yuen
similarity 0.59
Abstract · This manuscript has been submitted to IEEE journal

Rydberg atomic quantum receivers (RAQR) exhibit exceptional sensitivity to radio-frequency (RF) signals, positioning them as promising candidates for next-generation wireless systems. Extending their capabilities to orthogonal frequency-division multiplexing (OFDM), however, requires atomic responses that go beyond broadband reception and are tailored to the structured interference of multicarrier signals. To bridge this gap, we develop an atomic-comb Rydberg receiver based on six-wave mixing (SWM) transduction. In particular, injecting a multi-tone local oscillator (LO) into the RAQR generates frequency-shifted replicas of the intrinsic SWM response. By subtly tuning the amplitude and phase of each LO tone, constructive and destructive interference can be selectively induced to preserve desired response components while attenuating harmful frequency offsets. Furthermore, we harness the response-reshaping capability of the proposed atomic comb to proactively mitigate OFDM interference. More explicitly, by exploiting the discrete difference-frequency structure of both carrier-frequency-offset (CFO)-induced and phase-noise (PN)-induced inter-carrier interference (ICI), we optimize the atomic-comb response to suppress dominant ICI components directly. We further reveal an intrinsic coupling between spectral shaping and the time-domain effective channel memory, motivating a joint optimization of both ICI and inter-symbol interference (ISI), which simultaneously suppresses inter-carrier leakage and post-cyclic-prefix (CP) tail energy. Extensive simulation results validate our atomic-comb design, unveiling that the proposed atomic comb can effectively reshape the receiver response over the OFDM, while mitigating ICI, shortening the effective channel memory, and substantially lowering CP overhead.

0.29

Physics-Aware Power Optimization for Rydberg Quantum Arrays via Barankin Bound Minimization

cs.IT ·2026-10-07 ·Yixiao Li, Jiayi Zhang, Bokai Xu, Yin Zhang
similarity 0.59
Abstract · 7 pages, 5 figures, IEEE GlobeCom 2026

Rydberg-atom quantum uniform linear arrays (RAQ-ULAs) offer a promising sensing architecture for direction-of-arrival (DOA) estimation in terahertz (THz) beam alignment. Existing studies often model the quantum receiver as a macroscopic linear block and rely on the Cramer-Rao bound (CRB) for array evaluation or power allocation. However, as a local variance bound, the CRB cannot capture threshold breakdown caused by spatial ambiguities in low-signal-to-noise-ratio (SNR) regimes. This paper proposes a physics-aware power optimization framework for RAQ-ULAs based on stochastic Barankin bound minimization. We derive a closed-form stochastic multipoint Barankin bound (BRB) matrix under a low-SNR integrability condition and introduce an arcsine-prior calibration to characterize bounded-domain error saturation. By incorporating a Lindblad-guided electromagnetically induced transparency (EIT) readout model, we couple the ambiguity-sensitive BRB with photon shot noise, power broadening, and laser Rabi frequencies. A CRB-optimized analytical baseline is further derived to expose the limitation of local-SNR-based allocation. To solve the resulting nonconvex problem, we develop a backtracking majorization-minimization (MM) algorithm with a Lipschitz-based quadratic surrogate. The algorithm ensures monotonic decrease and converges to a feasible stationary point. Simulations show that the proposed framework predicts threshold breakdown more accurately than the CRB and enlarges the reliable operating region under severe THz attenuation.

0.33

Improving Energy Efficiency of Uplink RSMA via Rydberg Atomic Quantum Receiver

cs.IT cs.NI ·2026-10-29 ·Xinya Shen, Zheng Chu, David Chieng, Chiew Foong Kwong, Qihao Peng +3 more
similarity 0.58
Abstract · 13 pages, 7 figures

This paper investigates an uplink rate-splitting multiple access (RSMA) network empowered by a Rydberg atomic quantum receiver (RAQR) to maximize energy efficiency (EE). To overcome the amplitude-only measurement limitation of the considered direct readout RAQR, we devise a phase alignment mechanism that linearizes the received signal while retaining full channel energy, thereby enabling tractable optimization. The resulting non-convex fractional EE problem is transformed via Dinkelbach's method. For IoT scenarios with symmetric rate requirements, we derive exact closed-form power allocation from the Karush-Kuhn-Tucker (KKT) conditions, which yields a globally optimal bisection search with negligible computational latency. For asymmetric rate requirements, we develop a generalized block coordinate descent-based power allocation (BCD-PA) framework that eliminates reliance on expensive interior-point solvers. We further propose a low-complexity paired allocation (LC-Paired) that exploits user pairing and closed-form bandwidth solutions via the Lambert-W function. Simulation results confirm that the KKT-based scheme attains the highest EE, while the BCD-PA offers a flexible complexity-performance trade-off. The LC-Paired scheme drastically reduces computational cost with only moderate EE degradation.

0.09