CS Paper Radar

Improving Energy Efficiency of Uplink RSMA via Rydberg Atomic Quantum Receiver

Xinya Shen, Zheng Chu, David Chieng, Chiew Foong Kwong, Qihao Peng, Zhengyu Zhu, Pei Xiao, Jianyue Zhu

cs.IT cs.NI ·submitted 2026-10-29 08:47 UTC · v1

Abstract

This paper investigates an uplink rate-splitting multiple access (RSMA) network empowered by a Rydberg atomic quantum receiver (RAQR) to maximize energy efficiency (EE). To overcome the amplitude-only measurement limitation of the considered direct readout RAQR, we devise a phase alignment mechanism that linearizes the received signal while retaining full channel energy, thereby enabling tractable optimization. The resulting non-convex fractional EE problem is transformed via Dinkelbach's method. For IoT scenarios with symmetric rate requirements, we derive exact closed-form power allocation from the Karush-Kuhn-Tucker (KKT) conditions, which yields a globally optimal bisection search with negligible computational latency. For asymmetric rate requirements, we develop a generalized block coordinate descent-based power allocation (BCD-PA) framework that eliminates reliance on expensive interior-point solvers. We further propose a low-complexity paired allocation (LC-Paired) that exploits user pairing and closed-form bandwidth solutions via the Lambert-W function. Simulation results confirm that the KKT-based scheme attains the highest EE, while the BCD-PA offers a flexible complexity-performance trade-off. The LC-Paired scheme drastically reduces computational cost with only moderate EE degradation.

Comment
13 pages, 7 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Rydberg Atomic Quantum Receiver Empowered Hybrid Non-orthogonal Multiple Access

cs.IT cs.NI ·2026-10-28 ·Xinya Shen, Zheng Chu, David Chieng, Chiew Foong Kwong, Qihao Peng +3 more
similarity 0.78
Abstract · 13 pages, 13 figures

In this paper, we propose a novel uplink Hybrid Non-Orthogonal Multiple Access (NOMA) architecture assisted by Rydberg Atomic Quantum Receivers (RAQRs) to improve energy efficiency by addressing the physical constraints of atomic sensing. We formulate a joint optimization problem encompassing phase measurements and multi-user power allocation to minimize the total transmit power. This problem is particularly challenging due to the non-linear amplitude-only observations of atomic vapor cells. To decomposes the resulting non-convexity, we develop a hierarchical three-layer decomposition optimization framework that systematically decouples the global problem. The inner layer employs a customized Expectation Maximization-Gerchberg-Saxton (EM-GS) algorithm to resolve phase ambiguity and estimate equivalent channel gains. The middle layer derives closed-form optimal power allocation solutions via Karush-Kuhn-Tucker (KKT) conditions. The outer layer utilizes linear Minimum Mean Square Error (MMSE) detection for high-reliability signal recovery. Simulation results demonstrate the superiority of the proposed framework over conventional RF-based Hybrid NOMA. Notably, the atomic architecture achieves approximately a 93% reduction in total power consumption compared to Orthogonal Multiple Access (OMA) baselines while maintaining strict backward compatibility, thereby laying a solid foundation for practical deployment in next-generation green communication networks.

0.25

Neutral-Atom-based Quantum Optimization for Resource Allocation in NOMA Networks

cs.AI cs.IT ·2026-09-22 ·Patatchona Keyela, Remon Polus, Soumaya Cherkaoui, Ola Ahmad
similarity 0.70
Abstract

In wireless communication networks, many resource optimization problems are nondeterministic polynomial-time hard (NP-hard) due to their combinatorial nature and high computational complexity. Recently, neutral-atom-based quantum computing has emerged as a promising platform for efficiently solving such problems by leveraging quantum superposition and entanglement. However, its application to wireless communication optimization problems remains largely unexplored. In this paper, we investigate the use of neutral-atom quantum platforms to solve the maximum access problem (MAP), formulated as a mixed-integer programming task that jointly considers admission control, user clustering, channel assignment, and power allocation in a non-orthogonal multiple access (NOMA)-enabled uplink network. To reduce the computational burden, the MAP is equivalently reformulated as a maximum independent set (MIS) problem in graph theory. This reformulation enables the use of the neutral atom platform based on Rydberg atom arrays, where the MIS problem is naturally encoded into the physical geometry and blockade constraints of the quantum system. Numerical results demonstrate the feasibility and potential of this approach for addressing large-scale wireless resource optimization problems.

0.25

Physics-Aware Power Optimization for Rydberg Quantum Arrays via Barankin Bound Minimization

cs.IT ·2026-10-07 ·Yixiao Li, Jiayi Zhang, Bokai Xu, Yin Zhang
similarity 0.67
Abstract · 7 pages, 5 figures, IEEE GlobeCom 2026

Rydberg-atom quantum uniform linear arrays (RAQ-ULAs) offer a promising sensing architecture for direction-of-arrival (DOA) estimation in terahertz (THz) beam alignment. Existing studies often model the quantum receiver as a macroscopic linear block and rely on the Cramer-Rao bound (CRB) for array evaluation or power allocation. However, as a local variance bound, the CRB cannot capture threshold breakdown caused by spatial ambiguities in low-signal-to-noise-ratio (SNR) regimes. This paper proposes a physics-aware power optimization framework for RAQ-ULAs based on stochastic Barankin bound minimization. We derive a closed-form stochastic multipoint Barankin bound (BRB) matrix under a low-SNR integrability condition and introduce an arcsine-prior calibration to characterize bounded-domain error saturation. By incorporating a Lindblad-guided electromagnetically induced transparency (EIT) readout model, we couple the ambiguity-sensitive BRB with photon shot noise, power broadening, and laser Rabi frequencies. A CRB-optimized analytical baseline is further derived to expose the limitation of local-SNR-based allocation. To solve the resulting nonconvex problem, we develop a backtracking majorization-minimization (MM) algorithm with a Lipschitz-based quadratic surrogate. The algorithm ensures monotonic decrease and converges to a feasible stationary point. Simulations show that the proposed framework predicts threshold breakdown more accurately than the CRB and enlarges the reliable operating region under severe THz attenuation.

0.33

BER-Aware Joint Parameter Optimization of Rydberg Atomic Quantum Receivers

eess.SP ·2026-09-03 ·Akash Kumar Mandal, Ming Shen
similarity 0.67
Abstract

Rydberg-atom quantum receivers (RAQRs) offer highly sensitive RF reception, but their communication performance depends jointly on atomic response, optical transduction, receiver noise, bandwidth, and wireless-channel conditions. This paper develops a BER-aware communication-theoretic framework for superheterodyne RAQR-assisted wireless communication, linking four-level Rydberg-atom dynamics and coherent optical detection to multipath propagation and digital communication performance. Closed-form instantaneous and average SNR and BER expressions are derived for square Gray-coded $M$-QAM over correlated Rayleigh fading. The RAQR operating point is then jointly optimized over atomic, optical, RF, and geometric parameters using analytical block-wise updates within a fixed-point procedure subject to physical and bandwidth constraints. Numerical results demonstrate substantial gains in low-power reception, bandwidth utilization, robustness to detuning, fading and delay spread, outage, and communication coverage compared with conventional, advanced, and fixed-point RAQR receivers. The results demonstrate that BER-aware joint optimization translates the intrinsic sensitivity of Rydberg-atom sensing into tangible communication-level gains.

0.46

Fundamental CRB-Rate Tradeoff of Rydberg Atomic Receivers for Integrated Sensing and Communication

eess.SP ·2026-10-06 ·Yin Zhang, Jiayi Zhang, Bokai Xu, Jieao Zhu, Bo Ai
similarity 0.64
Abstract

Integrated sensing and communication (ISAC) is a key technology for next generation wireless networks, requiring highly sensitive, compact receiver front ends with multiband coverage. Rydberg atomic receivers (RARs) provide a promising architecture that satisfies these requirements owing to their high sensitivity and continuous frequency tuning capability. Unlike in classical ISAC systems utilizing orthogonal resource allocation, executing concurrent multi band tasks within a single atomic ensemble relies on shared energy state transitions. Owing to this shared structure, the communication and sensing tradeoff in RAR-based ISAC introduces an atomic-response tradeoff beyond the classical subspace and deterministic-random tradeoffs. This paper studies a multi-branch RAR (MB-RAR) architecture for joint communication and radar sensing. By solving the five level Lindblad master equation at the local oscillator (LO) biased operating point and linearizing the communication and sensing radio frequency (RF) signals as small perturbations, we obtain the double-sideband dynamic signal response of the MB-RAR. The model reveals two intrinsic constraints. First, increasing the coupling laser strength broadens the response bandwidth but can weaken the atomic response. Second, strengthening one branch's LO can suppress the other branch's conversion gain through the shared Rydberg state, even when the latter's LO bias remains fixed, which is termed the inter band gain inhibition (IBGI). Based on these mechanisms, we formulate the achievable Cramér--Rao bound (CRB)-rate region and develop a rate-constrained joint search over coupling strength and LO power allocation. Numerical results validate the proposed response model and show that joint optimization provides a more complete characterization of the achievable CRB-rate region.

0.32

Continuous Wideband Multicarrier Rydberg Atomic Quantum Receiver

eess.SP ·2026-11-04 ·Qihao Peng, Qu Luo, Maged Elkashlan, Cunhua Pan, Pei Xiao +3 more
theory similarity 0.62
Abstract

This paper investigates continuous wideband orthogonal frequency-division multiplexing (OFDM) reception using an auxiliary (AUX)-assisted five-level Rydberg atomic quantum receiver (RAQR) with a single microwave local oscillator (LO), without requiring additional atomic reception transitions or LO frequency combs. By exploiting Floquet theory, the proposed framework characterizes the dynamic atomic response at finite signal-LO detunings without relying on a quasi-static Taylor expansion around the LO operating point. Specifically, closed-form radio-frequency (RF)-to-electrical conversion expressions are derived from the Lindblad master equation under weak-probe and weak-signal approximations. Building on these expressions, an equivalent multicarrier communication model is established, revealing the inherent frequency selectivity of the atomic response and the resulting subcarrier-dependent amplitude and phase distortions. RAQR-aware zero-forcing (ZF) equalization is developed to enable reliable OFDM reception. Furthermore, analytical results reveal how LO and AUX driving influence the atomic response through dressed-state splitting and energy-level shifts. An upper bound on the LO-referenced half-power span is derived, and an approximately $18$-dB reduction in center-response power per bandwidth doubling is established in the AUX-free strong-LO regime. Simulation results validate the analytical response model and reveal pronounced subcarrier-dependent amplitude and phase variations across over $10$~MHz, highlighting the potential of RAQRs as wideband receiving front ends for future wireless communications.

0.16

Quantum Annealing for Resource Allocation in Next-Generation Wireless Communication Networks: A QUBO Modeling Guide

cs.IT ·2026-10-09 ·Nguyen Xuan Tung, Le Tung Giang, Mai Dinh Cong, Pham Dang Anh Duc, Nguyen Hoang Viet +2 more
published similarity 0.62
Abstract · 16 pages, 5 figures, and 7 tables. Accepted by OJ-COMS

Quantum annealing (QA) offers a physics-inspired approach for such subproblems by mapping them onto an Ising Hamiltonian, which is algebraically equivalent to a Quadratic Unconstrained Binary Optimization (QUBO) model executable on quantum annealers or hybrid solvers. However, their practical employment in wireless systems critically depends on the specific problem formulation, on the particular variable encoding, constraint handling, solver selection, hardware embedding, and fair benchmarking. This paper develops wireless-oriented QUBO modeling guidelines for QA-assisted resource allocation. We first present a beginner-friendly toy example in which a terrestrial-aerial resource-allocation problem with a fractional signal-to-interference-plus-noise ratio (SINR) maximization objective is reformulated into a two-bit QUBO via Boolean interpolation, converted into an Ising representation, and decoded back into a wireless scheduling decision. The same scheduling is applicable to UAV, aircraft, satellite, and terrestrial links in SAGIN systems. We then review the QA foundations and solver ecosystems, including binary quadratic, discrete quadratic, constrained quadratic, and hybrid models from the perspective of NG wireless optimization. Furthermore, we discuss both binary and discrete encoding, penalty-based constraint conversion, embedding overhead, solution decoding, and feasibility verification. A QUBO Compatibility Index is introduced as a lightweight diagnostic metric for assessing the associated QUBO formulation readiness, rather than a predictor of runtime or solution quality. Finally, a case study on max-min uplink power control in cell-free massive MIMO illustrates how a fairness-oriented wireless problem can be discretized, constrained, converted into the concept of a QUBO, and evaluated against classical baselines. A host of key challenges and future directions are also discussed.

0.23

Accelerating Distributed Variational Quantum Computing over Wireless Networks with Incentive Mechanism Design

cs.DC ·2026-11-12 ·Shaba Shaon, Dinh C. Nguyen, Octavia Dobre
published similarity 0.61
Abstract · Accepted for publication in IEEE Journal on Selected Areas in Communications (JSAC), 16 pages

Distributed variational quantum computing (DVQC) appears as the emerging paradigm to address the limitations of near-term quantum devices by decomposing large parameterized quantum circuits (PQCs) into smaller subcircuits executed across multiple quantum processors. In this context, how to incentivize quantum processors to participate actively is crucial for accelerating DVQC, yet remains largely unexplored in the literature. To address this significant gap, we propose a novel two-stage incentive framework for wireless DVQC. In the first stage, we minimize processor-side energy cost via a joint optimization of subcircuit parameters, number of noise measurements, and transmit power, efficiently solved using block coordinate descent (BCD) and successive convex approximation (SCA). In the second stage, we maximize aggregator-side system utility by selecting an optimal subset of processors based on their optimized energy costs derived from the first stage, formulating a non-convex combinatorial selection problem addressed using the alternating direction method of multipliers (ADMM). Extensive numerical experiments on the MNIST and CIFAR-10 datasets demonstrate that our DVQC framework achieves training and testing performance comparable to centralized quantum computing in terms of accuracy and loss, with similar convergence behavior on MNIST and slightly slower initial convergence on CIFAR-10. Moreover, our optimization approach consistently outperforms baseline schemes in energy efficiency and system utility, revealing a strong synergy between processor-level energy minimization and incentive-driven processor selection, where reduced energy costs directly enhances a processor's likelihood of selection and contributes to higher overall system utility.

0.25