CS Paper Radar

Continuous Wideband Multicarrier Rydberg Atomic Quantum Receiver

Qihao Peng, Qu Luo, Maged Elkashlan, Cunhua Pan, Pei Xiao, George K. Karagiannidis, Trung Q. Duong, Jiangzhou Wang

eess.SP ·submitted 2026-11-04 08:59 UTC · v1
theory

Abstract

This paper investigates continuous wideband orthogonal frequency-division multiplexing (OFDM) reception using an auxiliary (AUX)-assisted five-level Rydberg atomic quantum receiver (RAQR) with a single microwave local oscillator (LO), without requiring additional atomic reception transitions or LO frequency combs. By exploiting Floquet theory, the proposed framework characterizes the dynamic atomic response at finite signal-LO detunings without relying on a quasi-static Taylor expansion around the LO operating point. Specifically, closed-form radio-frequency (RF)-to-electrical conversion expressions are derived from the Lindblad master equation under weak-probe and weak-signal approximations. Building on these expressions, an equivalent multicarrier communication model is established, revealing the inherent frequency selectivity of the atomic response and the resulting subcarrier-dependent amplitude and phase distortions. RAQR-aware zero-forcing (ZF) equalization is developed to enable reliable OFDM reception. Furthermore, analytical results reveal how LO and AUX driving influence the atomic response through dressed-state splitting and energy-level shifts. An upper bound on the LO-referenced half-power span is derived, and an approximately $18$-dB reduction in center-response power per bandwidth doubling is established in the AUX-free strong-LO regime. Simulation results validate the analytical response model and reveal pronounced subcarrier-dependent amplitude and phase variations across over $10$~MHz, highlighting the potential of RAQRs as wideband receiving front ends for future wireless communications.

Closest papers

Nearest neighbours by meaning across the whole index.

Rydberg Atomic Quantum Receivers for OFDM Systems: An Atomic-Comb Design

cs.IT physics.atom-phquant-ph ·2026-10-11 ·Yuanbin Chen, Chong Meng Samson See, Chau Yuen
similarity 0.76
Abstract · This manuscript has been submitted to IEEE journal

Rydberg atomic quantum receivers (RAQR) exhibit exceptional sensitivity to radio-frequency (RF) signals, positioning them as promising candidates for next-generation wireless systems. Extending their capabilities to orthogonal frequency-division multiplexing (OFDM), however, requires atomic responses that go beyond broadband reception and are tailored to the structured interference of multicarrier signals. To bridge this gap, we develop an atomic-comb Rydberg receiver based on six-wave mixing (SWM) transduction. In particular, injecting a multi-tone local oscillator (LO) into the RAQR generates frequency-shifted replicas of the intrinsic SWM response. By subtly tuning the amplitude and phase of each LO tone, constructive and destructive interference can be selectively induced to preserve desired response components while attenuating harmful frequency offsets. Furthermore, we harness the response-reshaping capability of the proposed atomic comb to proactively mitigate OFDM interference. More explicitly, by exploiting the discrete difference-frequency structure of both carrier-frequency-offset (CFO)-induced and phase-noise (PN)-induced inter-carrier interference (ICI), we optimize the atomic-comb response to suppress dominant ICI components directly. We further reveal an intrinsic coupling between spectral shaping and the time-domain effective channel memory, motivating a joint optimization of both ICI and inter-symbol interference (ISI), which simultaneously suppresses inter-carrier leakage and post-cyclic-prefix (CP) tail energy. Extensive simulation results validate our atomic-comb design, unveiling that the proposed atomic comb can effectively reshape the receiver response over the OFDM, while mitigating ICI, shortening the effective channel memory, and substantially lowering CP overhead.

0.29

Fundamental CRB-Rate Tradeoff of Rydberg Atomic Receivers for Integrated Sensing and Communication

eess.SP ·2026-10-06 ·Yin Zhang, Jiayi Zhang, Bokai Xu, Jieao Zhu, Bo Ai
similarity 0.70
Abstract

Integrated sensing and communication (ISAC) is a key technology for next generation wireless networks, requiring highly sensitive, compact receiver front ends with multiband coverage. Rydberg atomic receivers (RARs) provide a promising architecture that satisfies these requirements owing to their high sensitivity and continuous frequency tuning capability. Unlike in classical ISAC systems utilizing orthogonal resource allocation, executing concurrent multi band tasks within a single atomic ensemble relies on shared energy state transitions. Owing to this shared structure, the communication and sensing tradeoff in RAR-based ISAC introduces an atomic-response tradeoff beyond the classical subspace and deterministic-random tradeoffs. This paper studies a multi-branch RAR (MB-RAR) architecture for joint communication and radar sensing. By solving the five level Lindblad master equation at the local oscillator (LO) biased operating point and linearizing the communication and sensing radio frequency (RF) signals as small perturbations, we obtain the double-sideband dynamic signal response of the MB-RAR. The model reveals two intrinsic constraints. First, increasing the coupling laser strength broadens the response bandwidth but can weaken the atomic response. Second, strengthening one branch's LO can suppress the other branch's conversion gain through the shared Rydberg state, even when the latter's LO bias remains fixed, which is termed the inter band gain inhibition (IBGI). Based on these mechanisms, we formulate the achievable Cramér--Rao bound (CRB)-rate region and develop a rate-constrained joint search over coupling strength and LO power allocation. Numerical results validate the proposed response model and show that joint optimization provides a more complete characterization of the achievable CRB-rate region.

0.32

BER-Aware Joint Parameter Optimization of Rydberg Atomic Quantum Receivers

eess.SP ·2026-09-03 ·Akash Kumar Mandal, Ming Shen
similarity 0.66
Abstract

Rydberg-atom quantum receivers (RAQRs) offer highly sensitive RF reception, but their communication performance depends jointly on atomic response, optical transduction, receiver noise, bandwidth, and wireless-channel conditions. This paper develops a BER-aware communication-theoretic framework for superheterodyne RAQR-assisted wireless communication, linking four-level Rydberg-atom dynamics and coherent optical detection to multipath propagation and digital communication performance. Closed-form instantaneous and average SNR and BER expressions are derived for square Gray-coded $M$-QAM over correlated Rayleigh fading. The RAQR operating point is then jointly optimized over atomic, optical, RF, and geometric parameters using analytical block-wise updates within a fixed-point procedure subject to physical and bandwidth constraints. Numerical results demonstrate substantial gains in low-power reception, bandwidth utilization, robustness to detuning, fading and delay spread, outage, and communication coverage compared with conventional, advanced, and fixed-point RAQR receivers. The results demonstrate that BER-aware joint optimization translates the intrinsic sensitivity of Rydberg-atom sensing into tangible communication-level gains.

0.46

A Novel Space-Time Coding Architecture for Rydberg Atomic Quantum Receiver-Based Systems

cs.ET ·2026-09-01 ·Asifa Zannat, Milad Abolpour, Dani Korpi, Mikko A. Uusitalo, Mikko Valkama +1 more
similarity 0.65
Abstract · 5 pages, 3 figures, under review at IEEE

Rydberg atomic quantum receivers (RAQRs) offer high sensitivity and wide tunability, but their magnitude-based readout yields a nonlinear model incompatible with conventional complex-valued multi-input multi-output (MIMO) processing. We propose a low-complexity space-time coding framework for point-to-point RAQR-assisted MIMO links. Data symbols are encoded using real orthogonal designs, while strong-reference heterodyne reception yields an equivalent real-valued linear model. The preserved orthogonality enables matched filter symbol-wise detection without matrix inversion or vector search. An analytical bit error probability expression is derived, proving the proposed scheme achieves the full transmit-receive diversity. Simulations validate the analysis and demonstrate improved performance over spatial multiplexing benchmarks.

0.36

Linear Dynamic Range Extension for Rydberg Atomic Receiver via Band-Limited Reconstruction

eess.SP cs.IT ·2026-11-13 ·Meng Fang, Lebin Chen, Jun-Rong Chen, Ming-Min Zhao, Bin-Bin Wei
similarity 0.63
Abstract · 6 pages, 7 figures

Rydberg-atom receiver offers a promising approach to radio-frequency (RF) signal reception in wireless communication and sensing systems, combining high sensitivity with the potential for broad frequency coverage. However, the limited linear dynamic range (LDR) of the atomic system causes nonlinear distortion at high input signal levels, thereby restricting the receiver's effective linear input range. To address this issue, we analyze the mechanisms underlying nonlinear distortion in Rydberg atomic receivers and propose a physics-informed band-limited iterative reconstruction (PI-BLIR) method. Specifically, by exploiting the known nonlinear atomic response and signal bandwidth prior, we formulate a constrained maximum-likelihood problem to reconstruct the distorted complex intermediate-frequency (IF) waveform. With the bandwidth constraint absorbed into the frequency-domain parameterization, the constrained maximum-likelihood problem is transformed into an unconstrained optimization problem, which is solved using gradient descent. The proposed method relies solely on digital post-processing and requires no changes to the local-oscillator (LO) field strength, optical parameters, or atomic operating conditions. Simulation results demonstrate that PI-BLIR extends the receiver's LDR by more than 14 dB and enhances the demodulation performance of the atomic receiver.

0.25

An Optical Pathway to Movable Rydberg Atomic Quantum Receivers

eess.AS ·2026-08-31 ·Qihao Peng, Qu Luo, Lixia Xiao, De Mi, Neng Ye +4 more
unusual similarity 0.63
Abstract

This paper develops an optically movable Rydberg atomic quantum receiver (RAQR), in which the probe and coupling beams are steered within each vapor cell to dynamically reconfigure the effective radio-frequency (RF) sensing position without mechanical actuation. A closed-form equivalent baseband model is derived by separating the atomic transduction coefficient, optical steering phase, and cell-center array response into distinct factors and the accuracy of the resulting model is validated against numerical solutions of the Lindblad master equation. Based on the derived model, we reveal two complementary channel-shaping mechanisms, including intrinsic beam-pattern shaping through RF-to-optical transduction and per-cell phase control enabled by optical displacement. To further exploit these capabilities, a non-convex sum-rate maximization problem is formulated over the optical positions and local oscillator design and solved via an alternating optimization framework with analytical gradients. Simulation results validate the derived model and demonstrate substantial performance gains enabled by optical movability, highlighting its potential as a programmable receiver architecture for future wireless networks.

0.39

Improving Energy Efficiency of Uplink RSMA via Rydberg Atomic Quantum Receiver

cs.IT cs.NI ·2026-10-29 ·Xinya Shen, Zheng Chu, David Chieng, Chiew Foong Kwong, Qihao Peng +3 more
similarity 0.62
Abstract · 13 pages, 7 figures

This paper investigates an uplink rate-splitting multiple access (RSMA) network empowered by a Rydberg atomic quantum receiver (RAQR) to maximize energy efficiency (EE). To overcome the amplitude-only measurement limitation of the considered direct readout RAQR, we devise a phase alignment mechanism that linearizes the received signal while retaining full channel energy, thereby enabling tractable optimization. The resulting non-convex fractional EE problem is transformed via Dinkelbach's method. For IoT scenarios with symmetric rate requirements, we derive exact closed-form power allocation from the Karush-Kuhn-Tucker (KKT) conditions, which yields a globally optimal bisection search with negligible computational latency. For asymmetric rate requirements, we develop a generalized block coordinate descent-based power allocation (BCD-PA) framework that eliminates reliance on expensive interior-point solvers. We further propose a low-complexity paired allocation (LC-Paired) that exploits user pairing and closed-form bandwidth solutions via the Lambert-W function. Simulation results confirm that the KKT-based scheme attains the highest EE, while the BCD-PA offers a flexible complexity-performance trade-off. The LC-Paired scheme drastically reduces computational cost with only moderate EE degradation.

0.09

A Phase-Balanced Differential Rydberg-Atom Quantum Receiver for Weak GNSS Signal Detection

eess.SP quant-ph ·2026-11-06 ·A. K. Mandal, F. Zhang, J. H. Mikkelsen, M. Shen
similarity 0.61
Abstract · 6 pages, 10 figures, submitted to IEEE ICC 2027 (in review)

This paper proposes a phase-balanced differential Rydberg atomic quantum receiver (DRAQR) for weak-signal recovery, using local-oscillator phase control to reinforce differential signal responses and a shared squeezed-reservoir model to correlate inter-cell quantum projection noise (QPN) and photon shot noise (PSN). An analytical model incorporating QPN, PSN, intrinsic thermal noise (ITN), and inter-cell correlations quantifies signal-to-noise ratio (SNR) gain, outage-constrained minimum detectable power, and bit-error rate (BER) for square $M$-QAM. For the evaluated settings, SNR gain reaches approximately $10$~dB as PSN correlation approaches unity, with BER decreasing as correlation increases. Under Rician fading, at a $0$-dB threshold SNR and maximum outage probability of $0.1$, the minimum detectable power decreases from $-146.95$~dBm at $K=1.155$ to $-159.98$~dBm at $K=2.4$. Analytical results are validated against Monte-Carlo simulations over $150{,}000$ data runs per point for receiver-performance plots.

0.31