CS Paper Radar

GPU-accelerated wind farm layout search with a distilled endogenous wake model (EndoWake)

Martina Fischetti, Matteo Fischetti

cs.CE math.OC ·submitted 2026-10-06 06:46 UTC · v3

Abstract

We build on EndoWake, an endogenous wake model that links the wind speed at every grid cell to its upwind neighbors by linear constraints, so that wake field, siting decisions and project constraints share one mixed-integer model. Its four parameters are calibrated once on the single wake of a Reynolds-averaged Navier-Stokes (RANS) simulation, and a graphics processing unit (GPU) scores over a million layouts per second per wind direction. At Lillgrund, we compare searches guided by EndoWake and by PyWake under a RANS judge that no search calls: the fidelity of a wake model is not the quality of the layouts optimized under it. Two diagnostics separate a directional quadrature error between the sampled wind directions from a spatially localized surrogate bias off each wake edge, not reported before to our knowledge; at random directions, five paired starts detect no difference between the pipelines. The main result puts the speed to use: EndoWake ranks the moves of a local search on the GPU, and PyWake confirms every accepted move. On twenty unseen starts, with one GPU and thirty CPU processes, screen-and-confirm reaches similar mean gains to a search on PyWake alone, 7.9 times faster at one wind speed and 14.9 times faster on the annual energy (3.0 and 4.7 with a proof of local optimality charged to the timed search); on a second site it keeps its speed, and its local optima fall slightly short of those of PyWake alone. Code and data are deposited on Zenodo.

Comment
v3 (November 2026): states the fixed wake expansion rate of Section 7 and its effect; the inflow along an empty domain; formal terms in the abstract; minor corrections. v2 (October 2026): formal terms replace the metaphors of v1; new comparisons with TOPFARM and on a second site (Horns Rev 1). The replication package (doi:10.5281/zenodo.22017446) includes all the code. 40 pages, 5 figures

Closest papers

Nearest neighbours by meaning across the whole index.

EndoWake: Modeling Wind by Linear Programming for Wind Farm Layout Optimization

cs.CE math.OC ·2026-09-30 ·Martina Fischetti, Matteo Fischetti
similarity 0.65
Abstract · 30 pages + 12 pages of supplementary material (appended after the references). Replication package: https://doi.org/10.5281/zenodo.22017424

The Wind Farm Layout Optimization problem consists of placing a given number of turbines within a given area so as to maximize energy production. One of its main challenges is the wake effect between turbines, which can strongly affect production and is a cumbersome function to evaluate and to embed in an optimization framework. In this paper we introduce a new endogenous wake model (EndoWake), based on the idea of treating the wind speed at every grid point as a decision variable, linked to its upwind neighbors through linear propagation constraints. This makes it possible to incorporate the wake equations directly into a Mixed-Integer Linear Programming (MILP) model. We then develop such a MILP model and, in particular, introduce a new class of valid "band" inequalities, showing that they substantially strengthen the root bound. Building on this, we design a branch-and-check scheme: the master problem retains only the site variables together with one hypograph variable per cell and scenario, integer solutions are evaluated by an exact linear-time oracle, and the optimality cuts are problem-specific "upwind cuts". Computational results are reported on a ladder of square grids under a four-sector axial wind rose, demonstrating the effectiveness of the proposed improvements.

0.58

A Dantzig-Wolfe reformulation of the EndoWake model for optimal wind farm layouts

cs.CE math.OC ·2026-10-29 ·Martina Fischetti, Matteo Fischetti
similarity 0.59
Abstract · 25 pages, 1 figure, 8 tables. Submitted to international journal. Replication package: https://doi.org/10.5281/zenodo.23636074

Wind Farm Layout Optimization places turbines to maximize the expected energy under a wind rose, each turbine lowering the wind downwind. In the EndoWake model the wind field is a variable, propagated by linear inequalities, and layouts are certified by branch-and-check. On a ladder of grids it certifies the $10\times10$ grid and leaves the larger grids open after one hour. We tighten the relaxation by a convexification computed rather than derived: every pattern of turbines inside a small tile of the grid is enumerated once with its power and enters the master as a column. The device is valid because the wind field is antitone, and exact, for the cubic power curve, with a Benders cut at integer layouts. Reduced-cost fixing and propagation between overlapping tiles shrink the master before the tree search, and the tree repeats the fixing at every improving incumbent. The incumbent comes from a tile heuristic or an LP dive. On the same computer as the branch-and-check, the $12\times12$ and $14\times14$ grids close in 48 and 395 seconds. The $16\times16$ grid is certified on five seeds from random starts, one job per seed, the heuristic on a GPU, in 1413 seconds under the uniform rose and 6484 seconds under a non-uniform one. Times are medians. A pre-specified test set of 36 unseen instances with forbidden cells confirms the advantage in the axial setting. Certified means closed at the solver's gap of $10^{-4}$: the optimum lies within it plus a residual of at most 0.00042%.

0.23

Offline Reinforcement Learning for Wind Farm Control: A Wind Tunnel Study under Dynamic Wind Directions

cs.LG ·2026-09-11 ·Yuhan Su, Hongyang Dong, Simone Tamaro, Filippo Campagnolo, Carlo L. Bottasso +1 more
benchmark similarity 0.58
Abstract

This paper addresses the wind farm power maximization problem in the presence of wind direction changes. Specifically, a model-free Modified Twin Delayed Deep Deterministic Policy Gradient with Behavior Cloning (MTD3-BC) algorithm is proposed to tackle this task through yaw control under varying wind direction conditions. MTD3-BC is an offline reinforcement learning (RL) algorithm that aims to infer good behavior from only a precollected offline dataset. Additionally, to ensure smooth and moderate yaw adjustments, a new action consistency term is introduced into the policy optimization objective. Unlike online RL methods, MTD3-BC does not require extensive interactions with a wind farm simulator during training, significantly reducing computational costs and training time. A wind tunnel experiment is conducted to validate the effectiveness of the algorithm under varying wind directions. The results demonstrate that MTD3-BC successfully mitigates wake effects, delivering farm-level power gains of approximately 10\% over the baseline greedy strategy and performance on par with a data-calibrated model-based wake-steering benchmark, while requiring no wake model and only a small fraction of the training cost of online RL. To our knowledge, this is the first time an offline RL wind farm control policy has been validated and demonstrated experimentally.

0.30

Distributed Model-Free Turbine Repositioning for Wake Overlap Minimization in Floating Offshore Wind Farms

eess.SY math.DS ·2026-10-06 ·Zekai Chen, Ryozo Nagamune
similarity 0.58
Abstract · This paper has been submitted to the American Control Conference (ACC) 2027

This paper presents a model-free method for turbine repositioning control in floating offshore wind farms. The method uses a distributed online optimization framework to mitigate the wake effect. Conventional approaches rely on centralized, model-based control architectures, which suffer from poor practical feasibility. To overcome this limitation and address nonconvexity and inaccessible gradient information, we incorporate physics-informed knowledge of wake dynamics into the control system design. We demonstrate the effectiveness of the proposed method by comparing it with a centralized, model-based baseline in mid-fidelity simulations. Results indicate that the proposed method achieves slightly better performance while significantly reducing computational cost.

0.23

Benchmarking CPU, GPU, and ML Power-Flow Solvers from 14 to 70,000 Buses

cs.DC cs.SE ·2026-10-20 ·Benjamin Donnot, Sami Tazi, Eva Boguslawski, Nourredine Henka
benchmarkcode/data similarity 0.56
Abstract

Learned surrogates for power-flow (PF) computation are usually motivated by speed, compared against a single CPU-based baseline. We show this comparison is fragile: across 7 open-source CPU-based solvers evaluated on identical inputs, throughput varies by roughly 2.5-3 orders of magnitude, so the choice of baseline alone can flip the conclusion. We build a benchmark spanning 9 physics-based solvers: 7 CPU-based and 2 GPU-based, including a new batched GPU solver, gumsim2grid - and 3 published ML surrogates, evaluated under a shared, independently implemented KCL-mismatch check across 15 grids from 14 to 70,000 buses. On the PF task itself, a sufficiently parallelized CPU solver or gpusim2grid matches or exceeds the throughput of the ML surrogates we test while remaining orders of magnitude more accurate; we find no evidence that these GNN-style surrogates are yet competitive for PF specifically, though prior work reports genuine gains on related but more combinatorial tasks such as optimal power flow or power grid control. Beyond this finding, we hope the benchmark suite, code and reference evaluator released at https://github.com/Grid2op/gpusim2grid helps close a broader reproducibility gap in this space, where batched GPU-based PF solvers are rarely open-sourced or evaluated against a common set of baselines.

0.27

Does a completed simulation run mean a usable urban wind result for AI agents?

cs.AI ·2026-11-14 ·Zhongke Qu, Yunwei Zhang, Junwei Su, Yabin Zhang, Chengwei Li +3 more
similarity 0.54
Abstract

AI agents based on large language models (LLMs) can now configure and run computational fluid dynamics (CFD) solvers, but a completed run does not ensure that delivered metrics can be recomputed from raw outputs. This gap was examined for urban wind simulation, where multi-case comparisons must hold non-target conditions fixed and reported values must be traceable to raw samples. UrbanWind-AgentBench, comprising 200 tasks and 367 cases in 10 engineering task families, was constructed. Public task contracts specify variable factors, fixed conditions, numerical thresholds and deliverable requirements, and two-layer scoring separates a structural score for deliverables, run provenance and raw evidence from a numerical score obtained by independent recomputation against references. WindPilot was then proposed as an execution framework that incorporates contract parsing, execution provenance, deterministic verification and bounded acceptance review into the LLM execution loop. On 30 OpenFOAM tasks with independent references, at least the structural maximum of 60 points was reached by a base agent on 28 tasks, but numerical credit was obtained on only 6. With the same model name and budget, WindPilot increased the number of tasks with numerical credit to 17, full-score tasks from 0 to 3 and the mean task score from 62.5 to 72.5. Mean action steps fell from 130.4 to 104.9, and mean token consumption decreased by 12.9%. The mean gain for atmospheric boundary layer (ABL) tasks was 18.5 points. A completed simulation run is therefore not sufficient for a usable urban wind result; usability depends on checks that tie reported metrics to raw evidence during execution.

0.33

Validation-Centric AI-Assisted GPU Porting of a 250,000+ Line Legacy Weather Simulation Code

cs.DC ·2026-08-13 ·Tetsuya Hoshino, Masaya Kato, Kazuhisa Tsuboki, Daichi Mukunoki, Takahiro Katagiri +1 more
similarity 0.53
Abstract · 11 pages, 1 figure, 3 tables. Submitted to AgenticAI4HPC 2026

Recent advances in large language models have made CLI-based AI agents a practical tool for accelerating GPU porting of large legacy scientific applications. Such applications, however, are not merely old code bases; they are scientific assets whose credibility has been accumulated through long-term development, comparison with observations, and use in domain studies. GPU porting must therefore preserve this scientific validity while adapting the implementation to GPU-centric HPC systems. This paper presents a validation-centric AI-assisted GPU porting workflow through a case study of CReSS, a legacy Fortran weather simulation code with more than 250,000 lines. The workflow uses an AI agent to extract OpenMP regions, generate dump-based kernel benchmarks from physically meaningful simulation states, apply OpenACC transformations, and validate results through element-wise comparison with dumped reference data and application-level validation. Using a real typhoon simulation, the workflow produced numerically validated GPU implementations for 162 target kernels and achieved a 5.1x application-level speedup within practical wall-clock development cost. In particular, it detected numerical discrepancies in five kernels caused by floating-point and intrinsic-function differences, including threshold-sensitive branch divergence and cancellation effects, enabling feedback to the application developers. The case study suggests that, for large legacy scientific applications requiring dump-based validation, practical AI-assisted GPU porting must manage session-spanning context, runtime-state reconstruction, and costly recovery from small static-analysis omissions. These findings demonstrate that AI-assisted GPU porting requires not only code generation, but validation-centric workflow design.

0.12

Exploiting What NVIDIA Profilers Hide: Fast and Accurate Analytical GPU Performance Modeling

cs.AR cs.PF ·2026-11-10 ·Ziwen Wang, Qi Luo, Kunlin Li, Changxi Liu, Dongsheng Wang +1 more
similarity 0.52
Abstract · 13 pages, 7 figures, 2 tables

GPUs have become essential to many fields, including AI and scientific computing. As GPUs grow more complex, the design space of their hardware configurations becomes increasingly large, yet cycle-level simulators remain too slow to explore it. Analytical models make this exploration much faster. However, existing GPU analytical models fall short of accurately predicting performance across hardware configurations, because they re-estimate or scale every stall of a warp on the target configuration. We observe that fixed-latency stalls stay the same across configurations, whereas queueing stalls vary with the pressure on each hardware unit. Based on this observation, we propose ForeSight, a queueing analytical model that reuses the fixed-latency stalls measured on GPU hardware and recomputes the queueing stalls of each hardware unit from its pressure. To provide ForeSight with the counter values of each hardware unit, we build UnitSight, a profiler that recovers these values, which NVIDIA's official profilers hide by aggregating across units. Our evaluation on hardware configurations of nine NVIDIA GPUs shows that ForeSight predicts kernel execution time with a mean absolute percentage error (MAPE) of 8.3%, compared with 14.1% for the best baseline. ForeSight also predicts the end-to-end execution time of LLM inference on vLLM with a MAPE of 2.0%. It runs 49x faster than the cycle-level simulator Accel-Sim and faster than interval-based models such as GCoM. With the aid of ForeSight, we explore configurations derived from the H20 GPU for LLM inference and find one with 1.78x its performance/cost.

0.27