CS Paper Radar

On-Demand Robotic Assembly via Differentiable Geometric Part Repair

Millicent Schlafly, Fabio Schaub, Diogo Costa Pais, Luca Lelli, Janne Dvorak, Claire Colmont, Sven Marti, Mark D. Fuge

cs.RO ·submitted 2026-10-07 09:57 UTC · v1

Abstract

Transitioning from a digital design to a robotic assembly process currently requires months of expert manual tuning to reconcile part geometries with robotic constraints. This paper presents an end-to-end, autonomous pipeline for the design and physical construction of bespoke wooden assemblies. A generative AI agent translates user prompts into initial 3D geometries, balancing the visual fidelity of the design with select physical constraints. The assemblability of the design is further improved by a gradient-based repair stage that backpropagates through a graph attention network surrogate to adjust component geometries. In addition to correcting for disjointed and overlapping components, we demonstrate hardware-specific corrections, differentiably optimizing the geometry of components to enable robot screwdriving for 86.7% of 60 novel natural language inputs, significantly outperforming prior work by a factor of ten. For ten of the structures, we physically demonstrate assemblability with two UR5e robots. This work marks a meaningful step toward on-demand robotic manufacturing, enabling the rapid production of customized, low-volume goods.

Comment
8 pages, 4 figures, and 2 tables

Closest papers

Nearest neighbours by meaning across the whole index.

AssemblyWorld: Rethinking 3D Assembly with General-Purpose Agents

cs.CV cs.RO ·2026-09-30 ·Jiahao Zhang, Yeying Fan, Moitreya Chatterjee, Suhas Lohit, Bernhard Egger +3 more
code/data similarity 0.69
Abstract · 24 pages, 11 figures. Project page: https://assemblyworld.github.io

The task of 3D assembly requires translating an understanding of parts and their relationships into precise spatial arrangements. Can pretrained general-purpose agents assemble objects through visual interaction without additional assembly-specific fine-tuning? To investigate this question, we introduce AssemblyWorld, an interactive 3D environment in which agents inspect rendered views and manipulate supplied rigid parts, guided by images or assembly manuals when available. Agents perceive part geometry through 2D views rather than direct access to mesh vertices or faces, while their resulting assemblies are evaluated geometrically. Building on this environment, we construct AssemblyWorldBench, comprising 100 assembly tasks across 80 objects spanning furniture, industrial assembly, and fracture reassembly. Evaluating eight agent systems reveals substantial differences in their capabilities. The strongest system achieves 80.9% part accuracy but 59.4% complete-assembly success. The evaluated open-source systems lag substantially behind their stronger closed-source peers in both execution reliability and assembly accuracy. Analyses of visual references, interaction trajectories, and failures show how agents revise assemblies while leaving residual positioning errors. AssemblyWorld provides a common setting for both assessing the capabilities of interactive assembly agents and characterizing the gap between approximate structure recovery and precise reconstruction.

0.28

OmniCAD: A Large-Scale Benchmark for 3D Spatial Reasoning in Robotics Assemblies

cs.CV ·2026-08-23 ·Mingjia Wang, Taiting Lu, Ziwei Dong, Sisong Bei, Jingying Zeng +23 more
benchmarkcode/data similarity 0.69
Abstract

Recent vision-language models (VLMs) show strong capabilities in robotic perception and spatial reasoning, yet their ability to reason about complex mechanical assemblies remains underexplored. We introduce OmniCAD, a large-scale benchmark for assembly-aware 3D spatial reasoning across diverse industrial systems, including robotic mechanisms, automotive components, aerospace structures, and agricultural machinery. OmniCAD contains 25k mechanical assemblies, with an average of 12 parts per assembly and 21 types of mate relationships. Each assembly includes a human-verified ground-truth 3D model and renderings from 20 viewpoints. The benchmark evaluates three capabilities: (1) component-level 3D spatial reasoning, requiring prediction of part positions and orientations; (2) part-to-part relational reasoning, requiring identification of mating relationships and assembly constraints; and (3) tool-augmented agentic reasoning, where models iteratively select viewpoints, inspect visual evidence, and refine predictions. Experiments show that current VLMs struggle with industrial assembly reasoning, often producing inaccurate poses, invalid mating relationships, part interpenetration, and degraded performance as assembly complexity increases. We will open-source the benchmark, evaluation code, and tool interfaces to support research on accurate, physically valid, and scalable 3D assembly reasoning.

0.48

Representation-Guided Generation and Integration of Executable Programs for Robot Manipulation

cs.RO ·2026-09-25 ·Ruixiao Yang, Mingxin Yu, Chuchu Fan
similarity 0.67
Abstract

Building a robotic manipulation system requires connecting perception, planning, and control through carefully designed representations and interfaces. VLM code generation offers a way to automate this construction, but independently generated components may operate on incompatible geometric and task-level information. We present Representation-guided Integration of VLM-generated Executable Task programs (RIVET), a framework for generating complete manipulation systems around a shared object-centric representation. The representation combines per-object 6D poses, which preserve the metric information required for action grounding, with a relation graph that exposes the task-level structure required for planning. Guided by this representation, a VLM generates cooperating perception, rendering, relation-inference, and planning programs, each combining task-specific computation with available packages where useful. The resulting programs are authored once for a manipulation domain and reused on unseen start and goal configurations without code regeneration. We evaluate RIVET on cube stacking, tangram rearrangement, and three-dimensional assembly in simulation and on a physical robot, where we achieve 83% overall success rate in the real world by reusing offline-generated systems. Our results demonstrate that representation-guided program generation can adapt a common manipulation framework to tasks with different geometric, relational, and sequential requirements.

0.17

InstructMesh: Selective Refinement of Generative 3D Models for Fabrication

cs.AI ·2026-08-28 ·Faraz Faruqi, Ahmed Katary, Demircan Tas, Theresa Hradilak, Ning Zhang +8 more
top venue similarity 0.66
Abstract

Recent advances in generative AI allow users to create 3D models from text or images. However, these models prioritize visual plausibility over geometric accuracy, often generating results with flaws that compromise their intended use post-fabrication. We present InstructMesh, an interactive post-generation refinement tool that enables selective repair of generative 3D models through region selection and targeted operations, such as opening or sealing voids, or adjusting local thickness. Users can invoke edit operations via natural language prompts or slider controls. By operating directly on the intermediate latent representation, InstructMesh allows users to apply robust geometric corrections without requiring expert modeling skills. To inform our design, we first analyze common fabrication-related failure modes in outputs from state-of-the-art generative tools. We then conduct two user studies, demonstrating that novices can identify and perform fabrication-relevant repairs on generative outputs using InstructMesh, and revealing user preference for hybrid interfaces that combine slider controls with natural language input.

0.37

End-to-End Autonomous Generation of Human Assembly Plans

cs.RO cs.GR ·2026-10-07 ·Faustin Arion von Arx, Millicent Schlafly, Mark D. Fuge
code/data similarity 0.66
Abstract · 22 pages, 10 figures

Turning a CAD design into an assembly plan is still largely done by hand, requiring engineers to reason about geometric feasibility, tool access, stability, and the ergonomics of human assembly. In this work, we encode long-established design for assembly (DfA) principles into a contained, end-to-end approach for generating assembly plans. Our approach takes only a mesh assembly and produces either a step-by-step assembly manual or a structured failure report, requiring no joint metadata, fastener annotations, or additional information. Four major components of a manufacturing plan are addressed autonomously: an assembly tool list, the assembly sequence and subassemblies, an assembly manual, and design feedback for improving assemblability. For determining the sequence plan, we systematically disassemble the object in a physics simulator and apply a cost function that encodes DfA principles. Manual generation, tool labelling, and assembly feedback rely primarily on multimodal large language models. Compared with a baseline that always removes the outermost part first from Tian et al., DfA-aware sequence planning reduces simulated assembly time, measured with a robot-arm assembly-time proxy, by 35% on 136 assemblies of 5 to 30 parts. The correct tool is selected for 88.6% of assembly steps. A vision-language model judge compares the generated manuals against ablated variants, identifying which page elements carry the information a reader needs. The presented approach and open-source code are available for use by engineers or AI agents looking to rapidly accelerate the creation of manufacturing plans for a given product design.

0.39

JARVIS: From Visual Manuals to Autonomous Robotic Assembly

cs.RO ·2026-10-20 ·Fan Ding, Fucai Ke, Kevin Yuchen Ma, Xuewen Luo, Wenyu Liang +3 more
benchmark similarity 0.66
Abstract

Visual manuals communicate procedural knowledge through stepwise diagrams, but translating these instructions into reliable long-horizon robotic execution remains challenging. We introduce JARVIS, a method-agnostic benchmark for autonomous visual-manual-guided execution without additional language instructions. JARVIS comprises 236,679 LEGO assembly tasks across 8,987 scenes, with a carefully curated JARVIS-v1 suite of 50 tasks for interactive robotic evaluation. Tasks span varying initial structural complexities and assembly horizons, requiring agents to interpret manuals, ground actions in an evolving workspace, and execute the intended procedure. A structure-aware evaluation protocol captures geometric accuracy, structural relations, construction order, partial progress, and completion. We further introduce JARVIS-agentic, a tool-grounded embodied agent that composes robot primitives into executable programs and uses execution feedback for verification and recovery, without task-specific action trajectories or model parameter updates. Across nine multimodal and reasoning models, task-oriented primitives increase the average assembly score. Performance nevertheless declines sharply with assembly horizon, and execution errors remain difficult to correct. Prior-task experience improves initial performance, while repeated reflection provides inconsistent benefits, highlighting persistent limitations in connecting visual procedural reasoning with reliable physical execution.

0.19

LABIT: Long-Horizon Robotic Assembly Benchmark for Industrial Tasks

cs.RO ·2026-10-12 ·Constantin Schempp, Christian Friedrich, Luca Kofler, Laura Suhm
benchmarkcode/data similarity 0.66
Abstract · This work has been submitted to an Elsevier journal for possible publication. Copyright may be transferred without notice, after which this …

Robot learning has undergone significant advancements in the domain of compliant control and robotic assembly. The development of novel methodologies has transcended the capacity to address discrete tasks, such as grasping or inserting, and has evolved to encompass the comprehensive construction of entire assemblies. Conventional benchmarks, which are predominantly focused on single tasks, are no longer adequate to address the complexity and interconnected nature of modern manufacturing processes. Consequently, the necessity for benchmarks to encompass a broader spectrum of assembly and subassembly steps is becoming apparent. In light of these developments, we propose LABIT, an industrial robotic assembly benchmark for long-horizon manipulation. This benchmark encompasses DIN-norm assembly tasks, including screwing, placing, inserting, and snapping, under both high and low tolerance conditions. The successive nature of these assembly steps implies that prior errors can influence subsequent manipulation. Consequently, this benchmark is particularly relevant for assessing the robustness of intelligent robotic systems. The proposed benchmarking protocols and novel performance metric, based on a taxonomy of assembly complexity in conjunction with the comprehensive list of parts and their corresponding CAD models, serve as essential tools for research and development in the field. To provide a baseline, we evaluate the benchmark using traditional force-position control and report reliability and score metrics per primitive, subtask, assembly category, and subassembly. Accompanying data is available at https://irp-hka.github.io/robotic-assembly-benchmark/.

0.48

Robot Tool Design from Scratch via Behavior-Aware Hierarchical Optimization

cs.RO ·2026-09-28 ·Yinghan Chen, Xiyao Tian, Yizan Dai, Yuyang Li, Yixin Zhu
similarity 0.66
Abstract

The ability to design a tool for a task marks a level of intelligence beyond merely understanding, selecting, or using one. Existing methods for robotic tool design typically optimize a tool's continuous shape and action within a structure that is prescribed or generated beforehand, so the structure itself stays outside the physical optimization loop. We study task-driven tool design from scratch, where tool structure, shape, and action are all derived from the desired physical outcome. Here we show that the three elements can be designed jointly by HOT, a hierarchical optimization whose upper level searches over discrete tool structures with BASS, while lower-level physical optimization evaluates their task behavior and returns milestone progress as behavioral evidence for the search, ultimately providing jointly optimized shape and action. On four tool-use tasks with distinct physical functions, HOT discovers functional structures after evaluating only a small fraction of search spaces containing up to 56 million structures, and the subsequent refinement of their geometry lowers the task loss on all tasks while preserving success, through deformations that are functionally interpretable. Once 3D printed, the tools accomplish all tasks on a real robot with the actions found in simulation. Designing tools from required physical effects, rather than a catalog of known tools, is a step toward the open-ended tool making seen in humans and animals.

0.23