CS Paper Radar

Stream-Based Active Learning with Cooperative Neural Networks for Data-Efficient Partial Inverse Design: An Automotive Glass Run Channel Case Study

Agung Nugraha, Hyerin Kwon, Heungjun Im, Gian Antariksa, Jihwan Lee

cs.LG cs.AI ·submitted 2026-10-07 11:07 UTC · v1

Abstract

Inverse design in engineering often runs into a simple problem. Each labeled training sample must be produced through expensive simulation, so building a large dataset is slow and costly. This study addresses that problem for partial inverse design, where only some design variables are specified and the rest must be inferred to reach a target performance value. We propose CoNN-AL, a framework for data-efficient partial inverse design that adds stream-based active learning to the Cooperative Neural Network with Denoising Autoencoder (CoNN-DAE). The model estimates predictive uncertainty through Monte Carlo dropout and uses it to decide, in real time, which incoming candidate samples are worth labeling, so the limited labeling budget is spent on the most informative designs. We validate the framework on a real-world automotive glass run channel dataset of more than 900,000 unique simulated designs. With only 20,000 actively selected labels, about 2.3% of the training pool, CoNN-AL reaches R-squared values of 0.967 to 0.982 across all missing-variable levels, approaching the upper-bound models trained on far more data. It reaches R-squared of at least 0.95 with 30 to 40% fewer labels than random sampling at the more difficult missing-variable levels and, at the most challenging level, is the only strategy in this study to reach R-squared of 0.98. Together with this work, we publicly release the dataset to support future research on data-driven design.

Comment
21 pages, 12 figures, 3 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Robust Active Learning for More Efficient and Reliable Paths to Optimal Design

cs.CE cs.LG ·2026-10-28 ·Hayriye Pehlivan Solak, Francesco Di Fiore, Jeroen Wackers, Riccardo Pellegrini, Andrea Serani +2 more
similarity 0.61
Abstract · Global Conference on Naval Architecture and Ocean Engineering (G-NAOE) 2026

Simulation-driven design optimization requires active learning strategies that efficiently combine models with different computational costs and levels of fidelity. We introduce Multifidelity Cost-Aware Screening (MF-CAS), which enables the joint selection of sampling location and fidelity using a surrogate that provides decomposed uncertainty intervals rather than a complete predictive probability distribution. MF-CAS exploits the contribution of each fidelity to the high-fidelity uncertainty together with its computational cost to determine whether a candidate should first be evaluated at low fidelity or directly progressed towards high fidelity. The method is assessed on the constrained 14-dimensional hydrodynamic optimization of the DTMB 5415 hull under a deliberately limited computational budget. MF-CAS achieves an approximately 9.0% resistance reduction, compared with 6.7% for the best baseline optimisation method, demonstrating that incorporating fidelity-resolved uncertainty directly into the joint location-fidelity decision can substantially improve multifidelity active learning efficiency.

0.23

Generative Design with Real-time Physics Explainability: Towards Product Definition in the Age of AI

cs.LG physics.comp-ph ·2026-11-12 ·M. de Campos, C. Drygala, E. Ross, A. Bruce, M. Bohon +1 more
similarity 0.59
Abstract

In this article, we explore opportunities from using generative AI in mechanical engineering. On the one hand, generative methods based on invertible neural networks have been recently proposed for the solution of inverse design problems, allowing to infer design parameters from performance labels. On the other hand, generative AI models have shown that they can act as real time capable surrogates for physics based simulations. Here we suggest that these two streams should be combined in a unified framework, where INN are used to control the design process from the customer requirements perspective and the generative simulation of the systems physics adds a layer of explainability, why the proposed design fulfils the requirements. As generative design is prone to hallucinations, we propose uncertainty quantification to fend off physically infeasible requests. Finally, validation with classical tools is a requirement for generative design process. To demonstrate the capabilities of our novel generative design paradigm, we develop two interactive environments, one for airfoil design based on simulator data and one for the combustor design space exploration based on measured data.

0.18

Separating learning from search and feedback in budgeted inverse design of periodic unit cells

cs.CE cs.LG ·2026-11-16 ·Shaoliang Yang, Jun Wang
similarity 0.58
Abstract · 49 pages, 11 figures, including Supplementary Information

To design a periodic material, engineers choose the shape and dimensions of a repeating cell to meet target properties. With few simulations, the benefit of a learned predictor can be hard to separate from the effect of which designs the search tries and how it uses simulator feedback. We compare two ways to predict properties in a library of 80 cell architectures, with up to 30 simulator calls per target. For each architecture, both searches use a table of predicted properties at different dimensions. One fills the table with predictions from neural networks. The other fits a simple model to the existing simulations for that architecture. Both searches use the difference between the predicted and simulated properties to adjust the next design. We generated 200 targets from simulated designs after fixing the analysis plan. The two searches showed no detectable difference in how often they matched all three properties within 2% or in the mean error of their returned designs. The upper limit of the 95% confidence interval for the gain in overall success rate was 4.5 percentage points. Follow-up controls on these targets changed success from 83.5% to 36.0% with a degraded table and 96.5% with an oracle table. In separate tests, using the simulation result to adjust the next design increased success for both types of table. Results cover one library and a coarse 32^3 voxel simulator. Designers can use this comparison to judge what a learned predictor adds when the search, feedback and budget are the same.

0.51

Conditional Flow Matching for ML-Based Inverse Design Problems

cs.LG ·2026-09-01 ·Juliana Felder, Milad Habibi, Soheyl Massoudi, Mark Fuge
published similarity 0.57
Abstract · 13 pages, 2 figures, 6 tables. Accepted for presentation at EngOpt 2026

Engineering inverse design is often limited by the high computational cost of iterative solvers for optimization problems constrained by partial differential equations (PDEs) and by their sensitivity to initialization. Deep generative models can produce candidate designs without rerunning the simulator at inference time. Generative adversarial networks (GANs) sample in one forward pass, whereas diffusion models require iterative reverse-time integration. In this work, we add conditional flow matching (CFM) to EngiOpt and compare it with a conditional diffusion model and a conditional generative adversarial network (cGAN) on structural (beams2d) and thermal (heatconduction2d) benchmarks from EngiBench using the same downstream optimization protocol. We use cumulative optimality gap (COG) and final optimality gap (FOG) as the primary metrics for evaluating the generated designs as warm starts for gradient-based refinement. On the evaluated EngiOpt implementations and two EngiBench tasks, CFM achieves the lowest measured COG, FOG, maximum mean discrepancy (MMD), and volume-fraction deviation on both tasks. CFM has mean volume-fraction deviations of 0.4% and 1.0% on beams2d and heatconduction2d, respectively, compared with 3.8% and 11.2% for diffusion. At Euler s = 16, CFM achieves 53.2 samples/s on beams2d, about 66 times the measured throughput of the evaluated diffusion baseline using 1000 network evaluations under the same timing protocol, with COG 1.182 +/- 3.126, compared with 1.173 +/- 3.100 for Euler s = 32. Across the two tasks, CFM produces warm starts with lower measured COG than both baselines and uses fewer network evaluations than diffusion.

0.33

One Loop, Two Gains: Can Active Learning win the Lottery for Free?

cs.LG cs.AIcs.CV ·2026-09-09 ·Benedikt Tscheschner, Eduardo Veas, Marc Masana
similarity 0.57
Abstract

The lottery ticket hypothesis posits the existence of winning tickets: sparse subnetworks that, when trained in isolation from their original initialization, match the accuracy of the full dense network. The predominant method for discovering such tickets, iterative magnitude pruning, alternates pruning with full retraining from scratch until convergence over many cycles. Similarly, deep active learning also retrains a model from scratch after each acquisition round as new labels become available. Despite this shared reliance on iterative retraining with a substantial computational overhead, the two paradigms have been studied separately. We observe that the iterative training loop inherent to pool-based active learning already provides the exact computational structure that iterative magnitude pruning exploits, and propose Improve & Prune (I&P), a method that integrates magnitude pruning into each active learning retraining cycle at practically no additional cost. This raises a key empirical question: can iterative magnitude pruning produce winning tickets under the non-stationary data regime of active learning? We investigate this question across multiple acquisition functions, architecture families, and image classification datasets, including an active fine-tuning scenario. Our results demonstrate that I&P yields sparse, deployable models at each active learning iteration. Those match the accuracy of their dense counterparts at sparsities up to 95%, effectively obtaining winning tickets as a byproduct of the active learning pipeline. These per-iteration sparse models can address two computational bottlenecks - per-round model retraining and acquisition scoring over the unlabeled pool - that currently prevent the practical adoption of DAL on large architectures and large unlabeled pools.

0.18

KPI-Conditioned Generative Design of Automotive Hood Inner Panels: A Two-Stage Retrieval-Generation Pipeline with Surrogate-Based Performance Estimation

cs.LG ·2026-08-23 ·Sudeep Chavare
similarity 0.57
Abstract · 20 pages, 8 figures, 9 tables

An inner hood panel must meet a deflection target, stay below a stress limit, and hit a mass target. Machine-learned surrogates have made the forward direction, geometry to performance, fast and routine. The inverse direction, producing geometry from a stated requirement, remains largely unaddressed for industrial parts whose design space is organized into discrete topology families rather than a continuous parameterization. This work presents a two-stage pipeline for that inverse problem. A reachability stage determines which topology families can satisfy a given requirement vector. A conditional variational autoencoder then generates point-cloud geometry within a selected family, and a neural-operator surrogate estimates the performance of each candidate. The pipeline is built entirely from public data and freely available compute, and is deployed as an interactive tool. The pipeline works, with qualifications that are reported as primary findings rather than caveats. The surrogate is accurate in aggregate, but its error is comparable to the performance differences it is asked to discriminate, which bounds what can be claimed for any individual generated design. That ratio of surrogate error to within-class signal is argued to be the quantity that determines whether a pipeline of this kind can work at all.

0.40

JAX-WAVE: A Differentiable Physics-Supervised Framework for Inverse Wave Design in Heterogeneous Media

cs.LG ·2026-11-10 ·Honghui Du, Binyao Guo, Yushu Pan
benchmark similarity 0.57
Abstract

Designing a prescribed wave field in a heterogeneous medium requires an initial pressure distribution that compensates for the medium's propagation response. Repeated numerical inversion solves this task afresh for each target and environment. We introduce JAX-WAVE for amortized inverse wave design: a shared neural network maps desired terminal fields and known wave-speed maps directly to bounded initial pressures. Training through a differentiable finite-difference time-domain solver uses the physical design objective without requiring optimized control labels. Linear propagation and symmetric pressure bounds imply an exact sign-reversal relation for the regularized optimum. A shared-weight projection enforces this relation, preserves feasibility, and satisfies an exact identity for the paired-sign objective. We characterize the discrete propagator and its weighted adjoint to connect learning, numerical inversion, and optimality assessment. On an independent confirmation set, three trained models achieve unseen-material errors of 25.24% for geometric targets and 4.77% for reachable targets. Matched-capacity comparisons show improved reconstruction with the sign parameterization. Within a 5 ms median online budget, the learned map reduces mean error by 45% relative to accelerated numerical inversion on the heterogeneous benchmark; longer numerical solves recover greater accuracy. The results establish a reusable inverse-design procedure and show how its accuracy and computational value depend on target structure and query workload.

0.31

Livin' on a Prior: Likelihood Score Approximation for Inverse Problems

cs.LG ·2026-09-28 ·Rostislav Makarov, Tal Peer, Danilo de Oliveira, Timo Gerkmann
benchmarkhot direction similarity 0.56
Abstract

Generative models have found great success as data-driven methods of solving inverse problems. Two popular approaches work either by combining a pretrained generative prior with a known degradation model, or by training a conditional generative model directly from paired data. We target a setting that spans both regimes: unknown degradations can be learned from few paired examples, while known degradations can be learned from self-generated samples. We introduce Likelihood Score Approximation (LSA), a generative framework that keeps a pretrained unconditional model fixed and learns an observation-conditioned model that approximates the likelihood score from paired samples. Within a conditional stochastic-interpolant framework, LSA can be trained in either score or velocity coordinates, independently of the unconditional model's native parameterization, and supports both deterministic and stochastic sampling. We further show empirically that the prior model can be swapped post-training while keeping the same LSA model. Across speech and image inverse problems, LSA operates effectively even at roughly 0.01% of the full training dataset. On the ImageNet-256 benchmark it achieves competitive or better restoration quality than strong posterior-sampling baselines while requiring up to several orders of magnitude fewer network evaluations.

0.29