CS Paper Radar

Separating learning from search and feedback in budgeted inverse design of periodic unit cells

Shaoliang Yang, Jun Wang

cs.CE cs.LG ·submitted 2026-11-16 03:47 UTC · v1

Abstract

To design a periodic material, engineers choose the shape and dimensions of a repeating cell to meet target properties. With few simulations, the benefit of a learned predictor can be hard to separate from the effect of which designs the search tries and how it uses simulator feedback. We compare two ways to predict properties in a library of 80 cell architectures, with up to 30 simulator calls per target. For each architecture, both searches use a table of predicted properties at different dimensions. One fills the table with predictions from neural networks. The other fits a simple model to the existing simulations for that architecture. Both searches use the difference between the predicted and simulated properties to adjust the next design. We generated 200 targets from simulated designs after fixing the analysis plan. The two searches showed no detectable difference in how often they matched all three properties within 2% or in the mean error of their returned designs. The upper limit of the 95% confidence interval for the gain in overall success rate was 4.5 percentage points. Follow-up controls on these targets changed success from 83.5% to 36.0% with a degraded table and 96.5% with an oracle table. In separate tests, using the simulation result to adjust the next design increased success for both types of table. Results cover one library and a coarse 32^3 voxel simulator. Designers can use this comparison to judge what a learned predictor adds when the search, feedback and budget are the same.

Comment
49 pages, 11 figures, including Supplementary Information

Closest papers

Nearest neighbours by meaning across the whole index.

Stream-Based Active Learning with Cooperative Neural Networks for Data-Efficient Partial Inverse Design: An Automotive Glass Run Channel Case Study

cs.LG cs.AI ·2026-10-07 ·Agung Nugraha, Hyerin Kwon, Heungjun Im, Gian Antariksa, Jihwan Lee
similarity 0.58
Abstract · 21 pages, 12 figures, 3 tables

Inverse design in engineering often runs into a simple problem. Each labeled training sample must be produced through expensive simulation, so building a large dataset is slow and costly. This study addresses that problem for partial inverse design, where only some design variables are specified and the rest must be inferred to reach a target performance value. We propose CoNN-AL, a framework for data-efficient partial inverse design that adds stream-based active learning to the Cooperative Neural Network with Denoising Autoencoder (CoNN-DAE). The model estimates predictive uncertainty through Monte Carlo dropout and uses it to decide, in real time, which incoming candidate samples are worth labeling, so the limited labeling budget is spent on the most informative designs. We validate the framework on a real-world automotive glass run channel dataset of more than 900,000 unique simulated designs. With only 20,000 actively selected labels, about 2.3% of the training pool, CoNN-AL reaches R-squared values of 0.967 to 0.982 across all missing-variable levels, approaching the upper-bound models trained on far more data. It reaches R-squared of at least 0.95 with 30 to 40% fewer labels than random sampling at the more difficult missing-variable levels and, at the most challenging level, is the only strategy in this study to reach R-squared of 0.98. Together with this work, we publicly release the dataset to support future research on data-driven design.

0.29

Autonomous Science Bench: Evaluating AI Agents for Autonomous Scientific Discovery

cs.AI ·2026-10-13 ·Yibo Wen, Han Liu
benchmark similarity 0.58
Abstract

AI agents for autonomous scientific discovery must decide which experiments to run under a limited budget. Most benchmarks for science agents provide fixed datasets, while others that support active experimentation largely rely on simulation. We introduce Autonomous Science Bench, an initial release comprising six budgeted design-build-test-learn campaigns grounded in published experiments across biology, chemistry, and materials science. Agents select batches of designs, receive measurements from a lab service, and use the results to guide subsequent experiments before delivering a predictive model. Success requires passing two calibrated gates: a discovery gate, which evaluates the designs the agent measured, and a learning gate, which evaluates its model's ranking of held-out designs. In a pilot evaluation of eight agent-model configurations and 144 trials, the best configuration succeeds in 67% of trials, while the hardest campaign is solved in only three of 24 attempts. The two gates reveal different weaknesses: some agents build accurate rankings but find too few promising designs, while others find promising designs but fail to predict which unseen designs will perform well. These differences are obscured by overall success rates alone. We release version 0.1 of the campaigns, lab runtime, and public leaderboard at https://yibow.me/autonomous-science-bench.

0.50

Meta-learning accelerates detector design optimization

cs.LG physics.ins-det ·2026-09-22 ·Maxim Borisyak, Nikita Gladin, Andrey Ustyuzhanin
similarity 0.57
Abstract

The quality of a detector design is ultimately determined by the quality of the inference it enables, that is, by the accuracy with which the quantities of interest are reconstructed from the raw detector response. For complex detectors, the inference is performed by machine learning models, and the relation between the design and the attainable inference performance is, in general, non-trivial. In this work, we consider the optimization of the inference performance with respect to the detector design. The conventional approach prescribes retraining the inference model at every candidate design, thus, treating the evaluations as independent tasks and discarding the shared structure of the optimal inference algorithms at different designs. We propose the meta-learned objective estimate (MLOE): instead of solving the inference problem anew at every candidate design, a single meta-inference model, conditioned on the design and trained continually along the optimization path, is shared across all of them. We test MLOE on three families of optimization problems, the last of which comprises two design spaces of the Spectrometer Straw Tracker of the Search for Hidden Particles (SHiP) experiment; under matched budgets of simulation calls, the meta-inference model evaluates a candidate design using fewer simulation calls than the baseline strategies and holds the better rank over the convergence curve in all examined cases.

0.34

SLIM: Learning an Operator for Material-Efficient 3D Lattice Refinement

cs.GR ·2026-10-17 ·Yueze Zhu, Yu Xing, Tianyang Xue, Peng-Shuai Wang, Jikai Liu +2 more
similarity 0.56
Abstract

Lattice inverse-design methods can generate cells that match prescribed effective properties, but property feasibility does not imply material efficiency. Removing redundant material from an existing lattice while preserving its homogenized elasticity ordinarily requires solving a separate constrained topology optimization problem for each cell, making large-scale refinement computationally expensive. We introduce SLIM (Structural Lightweighting via Implicit Mapping), a neural lattice-refinement model that replaces this per-instance iterative optimization with a single forward prediction. SLIM uses a dual-octree implicit network to predict the signed-distance field of a lightweight lattice and is trained on input--output pairs generated by property-constrained topology optimization. To improve stiffness preservation, we use homogenization sensitivities computed on the optimized target to estimate how residual voxel errors in a prediction affect its homogenized stiffness, and penalize this estimated change during training. Once trained, SLIM requires no topology optimization, homogenization analysis, or sensitivity evaluation during prediction. On the held-out test set of 906 lattices, SLIM achieves a mean relative volume-fraction reduction of 15.90%, a lightweighting success rate of 90.51%, and a mean normalized aggregate TO-target error of 0.636%, while reducing the average per-lattice generation time from 2516.0 s with direct TO to approximately 0.5 s. These results show that SLIM provides a fast neural surrogate for repeated topology-optimization-based refinement of 3D lattices.

0.08

AbsorbEvo: An Agentic Framework for Autonomous Inverse Design of Microwave Absorbers

cs.AI ·2026-10-01 ·Zhicheng Feng, Yubo Zhao, Xuefeng Yao
similarity 0.56
Abstract

Designing high-performance microwave absorbers requires specialized expertise in electromagnetic theory, materials science and simulation programming, and entails time-consuming optimization. Here, we present AbsorbEvo, an agentic framework for autonomous inverse design that translates natural-language performance objectives into designs verified by full-wave simulations. Its candidate evolution strategy integrates language reasoning, physics-based prediction and historical feedback. A large language model proposes the directions and magnitudes of parameter adjustments based on task objectives and computational history. The system combines directed increments with global sampling to generate candidates and uses a low-cost predictive model as a physics prior to rank them. Only high-ranking designs undergo full-wave simulation. Results passing physical validity checks are used to evaluate performance and guide subsequent search. Experience from training tasks is further distilled into textual skills, which are independently validated before use in new tasks. Under identical proposal budgets on held-out AbsorbBench-36 tasks, AbsorbEvo achieved a task success rate of 79.17%, versus 25.00% for a generic agent and 12.50% for random search. Its mean best coverage was 0.7816, compared with 0.6434 and 0.6448, respectively. By integrating language reasoning and physics-based feedback into design decisions, AbsorbEvo provides a methodological foundation for natural-language-driven autonomous inverse design of microwave absorbers.

0.25

KPI-Conditioned Generative Design of Automotive Hood Inner Panels: A Two-Stage Retrieval-Generation Pipeline with Surrogate-Based Performance Estimation

cs.LG ·2026-08-23 ·Sudeep Chavare
similarity 0.56
Abstract · 20 pages, 8 figures, 9 tables

An inner hood panel must meet a deflection target, stay below a stress limit, and hit a mass target. Machine-learned surrogates have made the forward direction, geometry to performance, fast and routine. The inverse direction, producing geometry from a stated requirement, remains largely unaddressed for industrial parts whose design space is organized into discrete topology families rather than a continuous parameterization. This work presents a two-stage pipeline for that inverse problem. A reachability stage determines which topology families can satisfy a given requirement vector. A conditional variational autoencoder then generates point-cloud geometry within a selected family, and a neural-operator surrogate estimates the performance of each candidate. The pipeline is built entirely from public data and freely available compute, and is deployed as an interactive tool. The pipeline works, with qualifications that are reported as primary findings rather than caveats. The surrogate is accurate in aggregate, but its error is comparable to the performance differences it is asked to discriminate, which bounds what can be claimed for any individual generated design. That ratio of surrogate error to within-class signal is argued to be the quantity that determines whether a pipeline of this kind can work at all.

0.40

Simplicity Goes Far: Auditing Prompt Optimizers with Demonstration-Conditioned Prompt Search

cs.AI ·2026-11-17 ·Bohe Chen
code/data similarity 0.56
Abstract · 13 pages, 2 figures, 4 tables

Automatic prompt optimization is growing more elaborate. Recent methods stack policy-gradient updates, trace reflection, and evolutionary search. These methods share a generate-and-select step; without controlling for it, reported gains may conflate the contributions of optimizer mechanisms and larger sampling budgets. We isolate this step as Demonstration-Conditioned Prompt Search (DCPS), repurposing the Automatic Prompt Engineer (APE) recipe as a mechanism-attribution control: it freezes the generator, conditions it on randomly sampled demonstrations, scores candidates on validation data, and keeps the best---no learned update, reflection, or evolution. Across two optimizer families, DCPS replaces Proximal Policy Optimization (PPO) in StablePrompt, matching classification accuracy within 0.5 pp at roughly one-third the measured cost; in DSPy-based compound AI systems, under the reported budgets, it matches GEPA's macro accuracy on GPT-4.1-mini while using 55% fewer rollouts at 32% lower measured API cost on average. The audit reveals a task-dependent pattern: proposal and selection recover much of heavier optimizers' performance on structured and instruction-following tasks, while additional mechanisms retain advantages in some open-ended and reasoning-heavy settings. We recommend benchmarking prompt optimizers against generate-and-select controls and reporting rollout counts, token usage, and dollar costs alongside accuracy. Code and artifacts: https://github.com/bhc6/DCPS.

0.51

DiffGA: Steering Frozen Diffusion Models for Materials Design via Evolutionary Search

cs.LG cond-mat.mtrl-sci ·2026-10-10 ·Shivang Agarwal, Rodrigo Wang, Kevin Ryczko, Aayush R. Singh
similarity 0.55
Abstract

Steering candidate generation toward user-defined objectives is central to inverse materials design, yet remains difficult when objectives are black-box, changing, or non-differentiable, as in many simulation- and experiment-derived properties. Generative models offer a solution but typically require retraining or fine-tuning for each new objective, demanding labeled data and substantial compute, or rely on differentiable guidance that is brittle to gradient noise and undefined for many practical targets. We present DiffGA, a retraining-free framework that injects evolutionary search into the sampling trajectory of a retrained diffusion model, evolving partially denoised states under an arbitrary black-box oracle. Because oracle evaluation often dominates campaign cost, we couple DiffGA with an on-the-fly Bayesian surrogate that reuses representations from state-of-the-art machine-learned force fields (MLFFs). A Gaussian process is fit during the campaign on the force fields's graph embeddings and, once it demonstrably ranks an unseen generation, replaces expensive property evaluations under an uncertainty-aware acquisition rule, reducing oracle cost with negligible loss of accuracy. Across three crystal-design tasks using a frozen MatterGen backbone, DiffGA outperforms diffusion-only, compute-matched, purely evolutionary, and fine-tuned baselines in oracle-assessed rates of stable, unique, and novel hits. Rather than proposing scientific compounds, we use density functional theory to quantify MLFF oracle fidelity, showing that it is a faithful proxy in key regimes but systematically biased in others, delineating when proxy-driven generative discovery can be trusted. On a representative sample, DiffGA's top hits survive first principles re-evaluation as physically realistic hits, while the surrogate-accelerated pipeline preserves this fidelity at a fraction of the cost.

0.26