CS Paper Radar

MultiFly: A Real-World Multimodal Aerial Dataset with Annotation-Efficient Label Transfer and Cross-Modal Semantic Consistency

Markus Gross, Andreas Greiner, Taehyoung Kim, Sivasubiramaniam Subbiah, Tomaž Cotič, Conrad Christoph, Oussema Dhaouadi, Simon Zieher, Surya Vijaya Kumar, Gordon Elger, Henri Meeß, Olaf Wysocki, Paul Spannaus, Daniel Cremers

cs.RO cs.CV ·submitted 2026-10-07 16:31 UTC · v2
benchmarkcode/data

Abstract

We introduce MultiFly, a real-world, low-altitude UAV dataset for semantic perception across RGB, thermal, LiDAR, and radar modalities. MultiFly provides 17,272 synchronized samples from four suburban scenes with frame-wise annotations for 15 semantic classes, together with calibration and GNSS-RTK/IMU measurements. To avoid costly and inconsistent modality-specific annotation, we propagate labels from only 115 manually annotated RGB images through shared geometric representations to all four modalities. This approach generates semantic labels for 17,157 additional RGB images, 17,272 thermal images, 840M LiDAR points, and 3.4M radar points. Transferred annotations achieve 89.93% average agreement with held-out manual annotations, and 90.94% average semantic consistency across all six modality pairs. We further establish semantic segmentation benchmarks for all four modalities, revealing distinct architectural behavior for dense LiDAR and sparse radar data. Taken together, MultiFly provides a scalable foundation for multimodal aerial perception and, to the best of our knowledge, the first public real-world low-altitude aerial benchmark that combines consistent frame-wise semantic annotations for RGB, thermal, LiDAR, and radar. Data at https://github.com/markus-42/multifly.

Closest papers

Nearest neighbours by meaning across the whole index.

PALIN: Pixel-Aligned LiDAR-NIR Multimodal 3D Object Detection with Benchmark

cs.CV ·2026-11-14 ·Yanan Zhang, Amit Vishnia, Chengbo Ai, Eleni Christofa, Runan Cheng +4 more
benchmark similarity 0.70
Abstract · 17 pages, including references and appendices

3D object detection is critical for intelligent transportation systems. LiDAR has been widely adopted for accurate geometric measurements; however, purely geometric representations remain ambiguous under sparse observations and occlusions, while cross-sensor multimodal fusion suffers from calibration and synchronization errors. To overcome these challenges, we leverage an Ouster LiDAR to construct PALIN (Pixel-Aligned LiDAR-NIR), a large-scale intrinsically pixel-aligned multimodal dataset jointly capturing geometry and NIR intensity, comprising approximately 8,000 annotated frames from static urban intersections and diverse mobile suburban scenes. Building upon this dataset, we propose CMambaFusion, a novel fusion framework consisting of a four-directional Cross-Mamba module for bidirectional cross-modal interaction and a Gated Concat-Mamba module for joint feature refinement. Extensive experiments demonstrate that PALIN enables effective multimodal learning, and CMambaFusion achieves superior accuracy-efficiency trade-offs over both LiDAR-only and representative fusion baselines.

0.18

OpenEarth-OVS44: A Multimodal Remote Sensing Dataset for Open-Vocabulary Segmentation

cs.CV ·2026-10-21 ·Yimin Wei, Hongruixuan Chen, Hao Zheng, Hao Liu, Jian Song +3 more
benchmark similarity 0.69
Abstract

In remote sensing, open-vocabulary segmentation is particularly important for flexible and scalable land-cover understanding across diverse regions, as it improves generalization to novel categories without requiring exhaustive pixel-level annotations. Despite its great promise, progress in this area remains largely constrained by existing datasets with limited category coverage and overly coarse taxonomies, and therefore struggles to support fine-grained semantic understanding required in real-world applications such as urban functional zoning, carbon accounting, and post-disaster assessment. To address these challenges, we present OpenEarth-OVS44, a multimodal benchmark with 290,587 expert-verified segments from 2,832 RGB images and 1,341 strictly registered RGB-SAR pairs at sub-meter spatial resolution, covering 40 cities across France, Japan, and the United States under a unified 44-class taxonomy organized into 9 base categories. Three evaluation tracks are provided: an RGB-only fine-grained benchmark, a multimodal track with diverse synthetic cloudy conditions for weather-robust evaluation, and a held-out cross-region track. Extensive experiments on representative open-vocabulary segmentation models demonstrate that training on OpenEarth-OVS44 substantially improves fine-grained segmentation performance over the strongest training-free baseline, with improvements of up to 7.1 mIoU points on unseen categories and 27.6 mIoU points on seen categories. The dataset and code will be released.

0.25

AevaScenes: An FMCW LiDAR Dataset and Benchmark for Long-Range Perception

cs.CV cs.RO ·2026-09-27 ·Gautham Narayan Narasimhan, Heethesh Vhavle, Kumar Bhargav Viswanatha, James Reuther, Deva Ramanan
benchmarkdatasetcode/data similarity 0.69
Abstract · Project page: https://scenes.aeva.com

FMCW LiDAR measures per-point radial Doppler velocity alongside range, providing a motion cue unavailable in conventional time-of-flight sensors. Exploiting this signal at long range remains understudied. We present an FMCW LiDAR dataset of 575 sequences (57.5K frames) with over 8 million annotated 3D boxes across 16 detection classes and per-point labels across 24 semantic classes, captured by six commercial FMCW LiDAR sensors and six paired 4K cameras across eight Bay Area cities, including 237 nighttime sequences, with annotations extending to 400m. We define a benchmark with three tasks: 3D object detection, scene flow estimation, and semantic segmentation. Detection and scene flow are evaluated across three range bins to 400m, with a public evaluation server. We explore the impact of Doppler measurements on flagship recognition tasks, and find significant improvements up to 2X in detection AP of far-away vehicles and pedestrians, particularly in low-latency single-frame settings. We similarly find scene flow accuracy is significantly improved with Doppler measurements across all ranges. Our dataset and benchmark have been publicly released at https://scenes.aeva.com.

0.47

M3GA-Wild: A Large-Scale Dataset and Benchmark for Multi-Modal Multi-session Ground-to-Aerial Place Recognition in Forests

cs.CV cs.RO ·2026-09-19 ·Ethan Griffiths, Maryam Haghighat, Simon Denman, Clinton Fookes, Milad Ramezani
publishedbenchmark similarity 0.69
Abstract · Accepted for publication in WACV 2027

We present M3GA-Wild, the first benchmark for multi-modal, multi-session ground-to-aerial place recognition in forests. M3GA-Wild unifies and extends existing forest localisation datasets, providing a holistic benchmark with synchronised RGB imagery and LiDAR from ground traversals spanning 36 km, aligned high-resolution aerial imagery and multi-altitude LiDAR covering 370 hectares, and accurate geo-referenced 6-DoF poses for precise evaluation. M3GA-Wild captures diverse forest scenes with varying viewpoints, occlusion, and environmental conditions, enabling systematic evaluation of visual, LiDAR, cross-modal, and multi-modal methods. Baseline experiments show that LiDAR-based approaches significantly outperform vision-only methods under severe viewpoint differences, while current multi-modal fusion strategies yield limited gains due to poor cross-modal alignment. By pairing aerial RGB imagery with geo-referenced aerial LiDAR, M3GA-Wild also enables evaluation of foundation models for monocular depth estimation as a cheap source of 3D geometry from forest imagery, with initial experiments revealing shortfalls of current methods. These results highlight key challenges in cross-platform localisation, including modality misalignment and severe domain gaps. M3GA-Wild establishes a new benchmark to support research in robust multi-modal localisation and long-term autonomy in unstructured natural environments. The dataset and code will be available upon acceptance.

0.41

Toward Robust LiDAR Semantic Segmentation for Real-World Deployment: Evaluation under Coarse Labels, Adverse Conditions, and Domain Shifts

cs.RO ·2026-09-02 ·Samir Abou Haidar, Alexandre Chariot, Mehdi Darouich, Cyril Joly, Jean-Emmanuel Deschaud
benchmark similarity 0.68
Abstract

LiDAR-based semantic segmentation is a core perception module for autonomous vehicles and mobile robots. Despite the strong performance of recent state-of-the-art methods on standard benchmarks, existing evaluation protocols remain focused on clean, single-domain settings and fine-grained label taxonomies, leaving deployment readiness largely unassessed. Real-world systems must handle safety-critical label semantics, degraded sensing conditions, and cross-domain variability, yet no unified protocol currently addresses all three aspects together. In this paper, we propose a structured evaluation protocol that assesses the deployment readiness of LiDAR semantic segmentation models along three complementary dimensions: (i) coarse-label evaluation aligned with autonomous driving safety priorities, revealing how label granularity affects different methods; (ii) robustness under eight types of LiDAR corruptions designed to emulate real-world atmospheric, geometric, and sensor degradations; and (iii) domain generalization across datasets without adaptation. The evaluation includes inference speed measured on an embedded Jetson AGX Orin platform, directly reflecting deployment constraints. Our results show that fine-grained benchmark rankings do not always reflect safety-relevant performance, that all methods experience substantial degradation under corruptions with architecture-dependent robustness characteristics, and that current domain generalization remains insufficient for reliable deployment. These findings expose concrete gaps between benchmark performance and deployment readiness, and provide a reference protocol for more practically grounded evaluation of LiDAR semantic segmentation.

0.07

Multimodal Fusion of RGB and Complementary Modalities for Semantic Segmentation

cs.CV ·2026-10-13 ·Hu Cao, Yifeng Cheng, Mu He, Mengyu Li, Yinlong Liu +1 more
similarity 0.68
Abstract · This work is submitted to the IJCV journal

Multi-modal semantic segmentation adds an auxiliary sensing stream to RGB images (RGB-X), such as thermal, LiDAR, depth, event, polarization, or light field. This can improve robustness in poor lighting and under motion blur. But different sensors often produce features that do not match well, and fusion can become unstable. To alleviate these issues, we propose a bidirectional polarity-aware cross-modality fusion (BPCF) module that effectively captures complementary cues while enhancing feature alignment. We evaluate the framework on six modality pairings: RGB-Thermal, RGB-LiDAR, RGB-Depth, RGB-Event, RGB-Polarization, and RGB-Light Field. Our model achieve state-of-the-art (SOTA) results on eight public datasets, including MFNet, KITTI-360, DELIVER, DDD17, DSEC, MCubeS, ZJU, and UrbanLF. The codes and trained models will be released upon acceptance.

0.28

Semantic-ITC: A Frame-wise Indoor Mobile Laser Scanning Dataset and Benchmark for Semantic Segmentation

cs.CV ·2026-09-16 ·Haiyang Wu, Muhammad Affan, George Vosselman, Ville Lehtola
benchmarkhot direction similarity 0.67
Abstract

Semantic labels for indoor mobile laser scanning (MLS) frames remain largely absent from current point cloud semantic segmentation benchmarks, which mainly focus on reconstructed indoor scenes or outdoor LiDAR perception. This paper introduces Semantic-ITC, to the best of our knowledge the first public dataset and benchmark for frame-wise indoor MLS semantic segmentation. The dataset contains 52 indoor sequences, 79,108 MLS frames, and 1.23 billion labeled points collected in classrooms, corridors, meeting rooms, offices, and study areas. Labels are attached directly to measured LiDAR points in each frame using 16 semantic classes covering structural elements, furniture, room equipment, vegetation, and other indoor objects. Semantic-ITC preserves the sparse, non-uniform, and frame-wise sampling pattern of indoor MLS, making it distinct from scene-level reconstructed point clouds and mesh-based indoor datasets. The annotations are produced by a hybrid workflow that combines predictions from a visual foundation model applied to synchronized RGB images, structural information from BIM, and manual refinement, with the final labels assigned to the original LiDAR frames. A single-frame benchmark is provided, and the best baseline reaches 79.27\% mIoU. Remaining errors are concentrated around object boundaries and ambiguous indoor classes, indicating the challenges of indoor MLS segmentation under sparse frame geometry and long-tailed class distributions. The dataset provides a public benchmark for evaluating semantic segmentation directly on measured indoor MLS frames and supports future studies on frame-wise indoor MLS semantic segmentation.

0.31

WorkIng: A Real-World and Synthetic Highway Work-Zone Benchmark Dataset for Autonomous Navigation

cs.CV ·2026-10-30 ·Xujun Xie, Dominik Rößle, Adithya Mohan, Daniel Cremers, Torsten Schön
publishedbenchmarkcode/data similarity 0.67
Abstract · Accepted to WACV 2027. 19 pages including supplementary material. (c) 2027 IEEE. Personal use of this material is permitted

Highway work zones are critical edge cases for autonomous vehicles (AVs), combining atypical geometries and jurisdiction-specific regulations that existing benchmarks fail to capture: real-world datasets lack 360° multi-modal, full-scene 3D work zone annotation, and no single recorded site can span the layouts and regulatory variants needed for generalizable models. We present WorkIng, a dual-domain benchmark and training resource. WorkIng-Highway provides a 360° multi-modal work zone benchmark with synchronized 128-channel LiDAR, six RGB cameras, and RTK-GPS across 32 km, yielding 12,000+ annotated frames and 227,399 tracked 3D bounding boxes. WorkIng-CARLA complements this with procedural simulation spanning 24 regulation-aware scenarios across six canonical topologies and six international traffic standards, populated by 100+ custom 3D assets. Benchmarking representative 3D detection and end-to-end planning architectures shows that real-world data remains the primary performance driver, and that scenario-stratified synthetic augmentation improves architectures across 2D recognition, 3D detection, and trajectory planning. Resources: https://github.com/cvims/WorkIng

0.42