CS Paper Radar

TacHair: Tactile Contact-Distribution Guided Online Correction for Robotic Hair Stroking and Perception

Ruiyi Hu, Yongqiang Zhao, Daniel Bak, Yupeng Wang, Xuyang Zhang, Shan Luo

cs.RO ·submitted 2026-10-07 14:20 UTC · v1
code/data

Abstract

Hair stroking is common in daily grooming and personal care, and is also widely used in hair-product evaluation, motivating robots with similar physical interaction capabilities. Existing robotic hair-care and surface-following methods mainly rely on trajectory planning, compliance, force regulation, or tactile-conditioned policies, but deformable hair can remain in contact while gradually drifting across the end-effector, making local interaction difficult to regulate. We propose TacHair, a tactile contact-distribution guided online correction framework that represents high-resolution tactile observations as a spatial hair-contact distribution. A visuotactile imitation policy generates the nominal stroking motion, while a separately trained residual module corrects local contact deviations, separating task progression from contact recovery. We evaluate TacHair in 525 real-robot trials across five head geometries and three hair conditions. A successful stroke requires both sufficient task progression and contact maintenance; our method improves success from 42.9% to 62.3% and contact maintenance from 59.4% to 88.0% over the same visuotactile policy without correction. These results demonstrate spatial tactile contact distributions as an effective feedback representation for contact-preserving interaction with deformable and visually occluded surfaces. Demos, code, and datasets are available at https://tachair.github.io.

Closest papers

Nearest neighbours by meaning across the whole index.

PredTac: Learning Contact-Rich Manipulation with Predicted Touch

cs.RO ·2026-09-14 ·Weijia Fan, Daqiang Guo
similarity 0.71
Abstract · 8 pages, 4 figures

Contact-rich manipulation benefits from tactile feedback, yet physical tactile sensors introduce hardware, calibration, synchronization, and maintenance costs that complicate policy learning and deployment. We formulate predicted touch as an alternative to measured tactile input and present PredTac, a framework that learns to infer tactile states from causal visual observations and robot states and uses the predicted touch as an explicit interface for policy learning and execution. A tactile predictor is first trained with tactile supervision and then used to provide contact information without requiring measured tactile input during downstream policy training or execution. We evaluate PredTac across three contact-rich manipulation tasks in simulation and on a real robot, and further examine how policy performance depends on the predicted contact content. In simulation goal-offset evaluations, predicted-touch policies achieve 27.0%, 52.0%, and 44.7% success on USB, Barbed-spike, and Valve, respectively, improving over the visual baseline by 8.0-13.7 percentage points. On the real robot, predicted-touch ACT achieves 70.0%, 50.0%, and 90.0% success on USB insertion, Barbed extraction, and Valve rotation, respectively, with a three-task mean of 70.0%, approaching measured-touch ACT at 72.2% and substantially outperforming visual ACT at 21.1%. Fixed-policy interventions further show that performance is sensitive to the spatial structure of predicted contact, with spatial rearrangement at fixed value distributions reducing Valve success by 10.7 percentage points. These results demonstrate that predicted touch can provide useful contact information for contact-rich manipulation without requiring tactile sensing as a policy input.

0.25

PanoTac: A Dense Three-Axis Tactile Sensor for Robust Touch-Centric Manipulation

cs.RO cs.AIcs.LG ·2026-11-02 ·Binglin, Wang, Xiaole, Jiang, Zicheng Teng +5 more
code/data similarity 0.70
Abstract · Project page: https://panotac.github.io

Contact-rich manipulation benefits from tactile feedback that captures both detailed contact geometry and interaction forces. When scooping grains, contact patterns help infer spoon orientation, while resistance transmitted through the grasp guides motion. To provide these complementary sensing capabilities, we present PanoTac, a low-cost, compliant tactile fingertip designed for dense three-axis tactile sensing. Each fingertip provides a $12 \times 32 \times 3$ tactile representation, with one normal ($z$) and two shear ($x$, $y$) response components at each taxel. The sensor operates at 60 Hz and costs less than $50 per fingertip. Sensor characterization quantifies response repeatability and consistency across sensor instances and contact locations. We integrate PanoTac into a robotic system with a visuo-tactile pipeline. Across test-tube preparation, grain scooping, and salt pouring, the resulting policies outperform vision-only baselines by an average of 46.7 percentage points. Ablations show that removing either spatial contact information or shear feedback reduces overall performance across the task suite. Our project page is available at https://panotac.github.io.

0.19

Touch Where It Matters: Learning Local Tactile Policies for Fine-Grained Gripper Control

cs.RO ·2026-10-17 ·Mingyuan Ba, Yanan Zhou, James Zhao, Weiming Zhi
similarity 0.70
Abstract · 9 pages, 11 figures, 3 tables

Visual imitation policies can organise task motion, yet contact-rich object use demands gripper adjustments beyond coarse opening and closing. We study fine-grained gripper control as a local feedback problem within ongoing task execution. Our approach assigns tactile feedback a dedicated control role during contact-rich task stages. We introduce ContactPolicy, a learned local controller that takes over the gripper while a visual base policy continues to control the arm. ContactPolicy combines tactile and force histories with current robot state to jointly predict gripper increments and their modulation, updating the gripper target from each new observation. An Intent policy manages control handover between the visual base policy and ContactPolicy. Real-world experiments on container opening, object handling, and tool operation show improved task success over both the Visuomotor Policy and Tactile-Force Policy baselines. Execution analysis illustrates how the gripper adjusts contact within an ongoing task, including periods of target retention and fine-grained changes as interaction conditions evolve. Arm-state ablations and failure analysis further examine how execution context supports local regulation. These results support task-local tactile policies for fine-grained gripper control within visual manipulation.

0.16

The Missing Touch: Spatially Distributed Tactile Feedback Brings Teleoperation Closer to Human Dexterity

cs.RO ·2026-08-19 ·Rohan Kota, Gregory Reardon, J. Edward Colgate
similarity 0.70
Abstract

A fundamental challenge in robotic teleoperation is enabling an operator to control a remote robot as effortlessly and intuitively as their own hands. Despite the growing use of teleoperation to collect demonstration data for training autonomous robot policies, teleoperated robot performance still falls significantly short of human dexterity, even for basic tasks. Here, we present evidence that a key factor contributing to this performance gap is the absence of spatially distributed tactile feedback. Using a two-degree-of-freedom (DoF) bilateral force-feedback telemanipulator paired with a 32-DoF tactile fingertip display, we show that operator performance improves significantly when localized deformations on the remote manipulator are faithfully reproduced on the operator's fingertip. In a series of teleoperation tasks, reproducing distributed contact information not only accelerated task performance but also brought teleoperated movements closer to natural human behavior by minimizing corrective actions and task completion steps, thereby reducing the deviation between teleoperated and natural trajectories by 29$\unicode{x2013}$79%. Furthermore, we found that increasing the resolution of the tactile feedback$\unicode{x2014}$by refining how finely the measured displacements were quantized for reproduction$\unicode{x2014}$compressed the state-space distribution of teleoperated motions, which has been associated with improved training outcomes for autonomous robot policies. Together, these results suggest that spatially distributed tactile feedback is essential for closing the gap between human and teleoperated dexterity and training the next generation of autonomous robots.

0.30

Bench2Dex: Benchmarking Visuo-Tactile Bimanual Dexterous Manipulation Across Dexterous Hands

cs.RO cs.AIcs.CV ·2026-09-14 ·Zhenjie Yang, Yideng Zhang, Dongjie Zhang, Chenyu Jiang, Xianshuai Liu +19 more
benchmarkcode/datahighly cited similarity 0.70
Abstract · Technical Report. Project Page: https://bench2dex.github.io/

Tactile sensing provides contact information that can be difficult to infer from vision alone, but tactile hardware for dexterous hands has not converged to a common design. Dexterous hands differ in finger structure, contact surfaces, and sensor layouts, while simulated tactile signals still differ from measurements produced by physical sensors. These factors make it difficult to study visuo-tactile manipulation across diverse dexterous hands within a consistent experimental setting. We present Bench2Dex, a simulation benchmark for visuo-tactile bimanual manipulation across 12 dexterous hands. We adapt existing robot models with a shared simulated tactile interface that converts local contact geometry into image-like tactile observations. The interface provides a consistent observation format across different hand morphologies without attempting to reproduce the output of a specific physical tactile sensor. Bench2Dex includes 26 bimanual manipulation tasks that involve tool use, articulated-object interaction, and multi-stage manipulation, together with about 1.3K human-teleoperated demonstrations. The benchmark provides synchronized visual, tactile, proprioceptive, action, and object-state observations, together with executable task metrics. For robustness, we group seven perturbation types into invariance axis, where the correct action does not change, and equivariance axis, where the correct action changes together with the perturbation. We evaluate ACT, Diffusion Policy, pi0.5, and GR00T N1.5 on Bench2Dex and report their performance and failure modes. Bench2Dex is meant as a platform for studying visuo-tactile learning across dexterous hands. It does not assume that simulated tactile observations can replace real tactile sensing; it offers a shared setting for algorithm development while tactile hardware and simulation models are still evolving.

0.55

High Fidelity Capture, Reconstruction, and Transfer of Human Demonstrations for Robot-Assisted Bathing

cs.RO cs.GR ·2026-08-10 ·Arjun S. Lakshmipathy, Jonathan P. King, Ethan Zuo, Rohit Satishkumar, Hongyi Chen +4 more
published similarity 0.70
Abstract · Accepted to Robotics: Science and Systems (RSS) 2026. Official conference page: https://www.roboticsproceedings.org/rss22/p094.pdf

Despite the demand for robots in high-value clinical tasks like bathing, contemporary systems still lack the safety and reliability required for complex, sustained physical interaction with humans. A key challenge hindering the development of such systems is that collecting, understanding, and effectively transferring highly dynamic, contact-rich human bathing demonstrations is difficult, even with modern motion and tactile sensing equipment. We present a straightforward, but effective framework for doing so with high fidelity by utilizing contact regions as a key processing primitive. We use our framework to build a dataset of bathing demonstrations performed by trained clinicians on human subjects. We then use this dataset to design and control an arm-mounted dexterous soft hand to perform bathing tasks on a mannequin using open- and closed-loop strategies. Our dataset is the first to provide high quality synchronized motion, shape, contact, and force during sustained, contact-rich human-human interaction, and our transfer strategies demonstrate effective use of these data across multiple levels of the robotics stack. All relevant materials will be publicly released to enable further advancements in physical human-robot interaction (pHRI) research.

0.38

Contact Trajectory Prompting: In-Context Transfer of Contact-Rich Behaviors from a Single Demonstration

cs.RO ·2026-10-13 ·Xian Nie, Yujie Zang, Yuhang Zheng, Yupeng Zheng, Songen Gu +6 more
similarity 0.69
Abstract

In-context robot learning enables robots to acquire new behaviors from demonstrations without test-time parameter updates. However, visual and kinematic specifications alone may not distinguish contact-rich behaviors that share similar motions but require different interaction intensities or patterns. We propose Contact Trajectory Prompting (CTP), a framework for one-shot transfer of contact-rich manipulation behaviors. CTP encodes motion and contact information from a single demonstration into an ordered contact trajectory prompt that captures their temporal evolution and specifies the desired physical interaction behavior. During execution, the policy uses online sensory feedback to retrieve interaction-relevant information from the prompt, conditioning closed-loop action generation on the demonstrated contact behavior. Across real-world wiping, rotation, and insertion tasks on objects excluded from training, CTP achieves 78.7% overall success, outperforming the strongest evaluated baseline by 13.0 percentage points. Changing only the reference demonstration enables CTP to follow contact specifications for both intensity and direction, including an intermediate wiping force level and clockwise or counterclockwise cap rotation. These results demonstrate that contact trajectories serve as effective behavioral specifications, extending in-context robot learning beyond motion imitation to physical interaction transfer. Project website: https://ctp-robotics.github.io/project_page.

0.20

Which Physical Tactile Cues Matter for Contact-Rich Imitation Learning? A Controlled Real-Robot Study

cs.RO ·2026-11-04 ·Xuhao Qin, Xiyan Huang, Haoyu Dong, Xi Zhang, Chenxi Xiao
published similarity 0.69
Abstract · 6 pages, 5 figures, 2 tables. Accepted to IEEE ROBIO 2026

Vision-based tactile sensors capture multiple aspects of physical interaction within a single image stream, including contact appearance, geometry, indentation depth, and tangential deformation. However, existing visuo-tactile policies often directly process tactile observations as images, making it difficult to determine which physical cues contribute to policy learning. This paper presents a controlled real-robot study that compares physically interpretable tactile signals using the LeRobot platform, enhanced with our visuo-tactile perception system. From the same tactile stream, we derive tactile RGB images, normal/depth maps, and marker-flow fields, representing contact appearance, geometry, and tangential deformation, respectively. Using identical task demonstrations and the same policy backbone, we evaluate the individual and combined contributions of these tactile cues. We further compare tactile encoders and visuo-tactile fusion strategies. Evaluation across 720 real-robot trials yields four key findings: (1) tactile perception substantially improves the overall success rate from 57.8% to 78.9%, although its contribution varies across task stages; (2) marker flow is the most effective individual cue, achieving a success rate of 74.4% and playing a particularly important role in regulating established contact; (3) cue-factorized encoding consistently improves performance, highlighting that different physical cues require tailored processing techniques; and (4) although the effectiveness of tactile fusion is task-dependent, cross-attention offers a lightweight solution with performance comparable to that of pretrained tactile encoders.

0.31