CS Paper Radar

An Experimental Evaluation of Scheduled Transmission and Hardware Timestamping on the Intel E830 NIC

Takahiro Hirofuchi

cs.NI ·submitted 2026-10-08 09:39 UTC · v1

Abstract

High-precision packet transmission is increasingly important in deterministic networking applications, including 5G fronthaul and Time-Sensitive Networking (TSN). Some recent high-speed network interface cards (NICs), including the Intel E830 and NVIDIA ConnectX series, support hardware-assisted transmission at specified times and hardware timestamping of received and transmitted frames. Despite the relevance of these capabilities to the stringent timing requirements of 5G fronthaul, little public information is available on their timing accuracy and performance characteristics. As a companion to our previous study of scheduled transmission on the NVIDIA ConnectX series, this paper experimentally characterizes the scheduled transmission and hardware timestamping capabilities of the Intel E830 NIC. Using an FPGA-based measurement platform with deterministic frame generation and nanosecond-resolution timestamping, we evaluate receive and transmit hardware timestamping and scheduled-transmission accuracy. The results show only several-nanosecond timing variation in hardware timestamping. Receive timestamp-derived frame intervals showed a peak-to-peak variation of up to 6 ns, while the transmit timestamp comparison showed a residual range of 4.6 ns after clock-drift compensation. Approximately 99% of the observed frame intervals were within $\pm$300 ns of the target interval, with occasional outliers of up to approximately 2 us. These results indicate that scheduled transmission can support applications with timing requirements on the order of several tens of microseconds, such as 5G fronthaul, but may be insufficient for TSN applications requiring transmission timing accuracy on the order of a few to a few tens of nanoseconds.

Closest papers

Nearest neighbours by meaning across the whole index.

Making Time-Sensitive Networking Deployable: A Comprehensive Lifecycle Architecture

cs.NI ·2026-08-20 ·Rubi Debnath, Paul Pop, Silviu S. Craciunas, Marc Boyer, Sebastian Steinhorst
publishedsurvey similarity 0.55
Abstract · Accepted for publication in the proceedings of the 2026 IEEE/ACM International Conference on Embedded Software (EMSOFT), October 2026

Time-Sensitive Networking (TSN) provides deterministic guarantees and bounded latency for safety-critical applications across different domains. While the IEEE 802.1 TSN standards provide a comprehensive set of mechanisms for time synchronization, shaping, scheduling, resource reservation, and reliability, deploying TSN in real-world applications remains a complex, multi-step engineering task. Existing research primarily focuses on optimizing individual objectives, such as increasing schedulability, reducing latency, accelerating solution generation, or improving performance analysis. However, whether these extensively researched solutions can be deployed in real-world systems remains unanswered, as the assumptions made in these methodologies often differ from practical hardware constraints. Therefore, a broader, holistic view of end-to-end TSN deployment and management remains an open research question. Currently, there is a lack of a unified perspective, consensus, and coordinated research efforts focusing on a comprehensive end-to-end TSN deployment workflow. We present a comprehensive overview of the TSN deployment lifecycle, current challenges, limitations of existing tools, and future research directions for TSN deployment and management. Lastly, we identify key research gaps from a deployment perspective and provide guidance for the development of next-generation deployable TSN networks.

0.25

LatencyLab: A DPDK-Based P4 Pipeline Latency Measurement Framework for FPGA SmartNICs

cs.DC ·2026-09-30 ·Pavani Kuppili, Zhaoyang Han, Yicheng Qian, Suranga Handagala, Michael Zink +2 more
published similarity 0.55
Abstract · This paper appeared in the 30th Annual IEEE High Performance Extreme Computing (HPEC) https://ieee-hpec.org/ where it won an outstanding pap…

P4-programmable FPGA SmartNICs place packet processing directly on the wire, but open FPGA P4 toolflows do not expose timestamping at the pipeline boundary, so the latency a P4 program adds on the target FPGA is rarely measured. This paper presents LatencyLab, a DPDK-based measurement framework for FPGA P4 pipeline latency that needs neither PHC/PTP support on the datapath nor clock synchronization. The FPGA's two ports share a network segment, so the switch multicasts a copy of each probe packet to both: one copy passes through the VitisNetP4 pipeline, the other through a matched bypass path. A kernel-bypass DPDK receiver busy-polls both ports and timestamps every packet with the CPU timestamp counter (TSC) as it is retrieved from the NIC's receive circular buffer. The arrival-time difference of the two copies isolates the pipeline latency after calibration against a null bitstream carrying the same traffic; transmit time cancel in the subtraction. We evaluate four VitisNetP4 programs on an AMD Alveo U280, probing each with a 20,000-packet trace measured ten times per session over five independent sessions, all TSC-timestamped and reflected for hardware timestamping. The measured latency distributions are tight and reproducible: 99% of packets fall within 20 ns of the median, session medians repeating within 1 to 2 ns (FiveTuple 107/137 ns, Forward 149 ns, RemoveHeader 177 ns, Checksum 364 ns at 250 MHz). Two independent checks agree with the framework: a kernel-free reflector returns every probe pair to a ConnectX-5 NIC whose adapter clock reproduces the measured distributions within a few nanoseconds, quantile by quantile, and every measured packet falls 18 to 22 clock cycles below the vendor's worst-case latency bound.

0.42

Scaling 5G-TSN Bridges: Operating Regimes, Scheduling, and Time Synchronisation Under Heterogeneous Industrial Traffic

cs.NI ·2026-08-14 ·Mohamed Seliem, Utz Roedig, Cormac Sreenan, Dirk Pesch
published similarity 0.54
Abstract · This version is the preperint of an accepted paper at MSWiM'26, the final version will appear in the conference proceedings

3GPP Release 16 enables a 5G system to operate as a transparent IEEE 802.1 TSN bridge, but its scalability under heterogeneous industrial workloads remains insufficiently characterised. This paper uses the nascTime framework on OMNeT++/Simu5G to evaluate how many TSN endpoints a single 5G NR cell can bridge before per-flow QoS degrades. We model closed-loop control, machine vision, bulk telemetry, and IEEE 802.1AS traffic over a four-bearer SDAP architec- ture, varying the number of endpoints from 1 to 40, MAC scheduler, radio bandwidth (10 MHz and 20 MHz), and channel model. Results show three operating regimes. Below saturation, non-DRR schedulers perform similarly; near saturation, QoS- aware PF reduces critical-flow P99 latency by up to two or- ders of magnitude relative to channel-aware and fairness-based schedulers; and under overload, only QoS-PF maintains near- complete delivery for the highest-priority traffic. Across the two evaluated bandwidths, the saturation threshold approximately doubles when bandwidth doubles. We also show that isolating IEEE 802.1AS/gPTP traffic on a dedicated high-priority radio bearer reduces clock-servo instability, although endpoints carry- ing lower-priority data still experience elevated synchronisation delay under saturation because of reduced MAC scheduling frequency. Finally, the evaluated sub-6 GHz, 30 kHz-SCS con- figuration exhibits an effective latency floor of approximately 2.25 ms, indicating that sub-3 ms TSN deadlines may require radio-configuration changes such as configured grants or higher numerology

0.27

Eunoia: Toward Application-Transparent, Scalable GPU Sharing in AI-RAN

eess.SP ·2026-10-11 ·Zongshen Wu, Marko Milenković, Jiarong Xing, Rahman Doost-Mohammady
similarity 0.53
Abstract

The AI-RAN paradigm makes the next-generation cellular network more versatile by co-locating AI and RAN workloads on the same commodity hardware. While the GPU is a promising platform for AI-RAN realization, a generic concurrent AI application interferes with the latency-sensitive RAN on GPU compute resources. In this paper, we propose Eunoia, a dynamic real-time AI-RAN GPU scheduler that is transparent to both AI applications and the RAN workload and operates at the granularity level of the RAN slot. We deploy Eunoia onto NVIDIA Aerial AI-RAN and evaluate Eunoia on both an over-the-air 5G private network and an emulated multi-cell network. We demonstrate that in a 27-cell AI-RAN, Eunoia keeps the RAN uplink P99 latency under 3 ms while delivering higher AI performance than other RAN-safe static partitioning methods.

0.38

Predictable Modelling and Analysis of Software-defined Vehicle Implementations

cs.LO ·2026-09-15 ·Pavlo Tokariev, Yosri Ayari, Julien Deantoni
published similarity 0.52
Abstract

Software-Defined Vehicles (SDVs) rely on middleware-based communication and hardware abstraction mechanisms that introduce temporal uncertainty affecting end-to-end timing guarantees. Previous work proposed probabilistic architectural models for early timing analysis, but the representativeness of these abstractions with respect to SDV implementations remained unclear. This paper presents an experimental framework combining probabilistic design-time timing analysis with a monitored Kuksa-based implementation. The same reaction-time analysis is applied both to simulation and implementation traces, enabling direct comparison between predicted and observed timing behaviour. We additionally introduce a comparison methodology separating conservative coverage from predictive fidelity of timing distributions. The results show that the proposed abstractions remain representative under different middleware load conditions while preserving conservative timing guarantees, supporting incremental timing verification approaches for SDV platforms.

0.34

Latency-Neutral Passive Cyber Monitoring for Grid-Edge Operational Technology Networks

eess.SY cs.CR ·2026-10-20 ·Damian Byrne, Emad Abukhousa, Jason Reed, Saman Zonouz
published similarity 0.52
Abstract · 5 pages, 4 figures, 2 tables. Accepted for presentation at the IEEE PES Grid Edge Technologies Conference and Exposition 2027

Deterministic industrial networks often present an operational trade-off between maintaining microsecond timing of primary control loops and capturing security telemetry. This work investigates the engineering feasibility of the Operational Technology Supervisor (OTSV), a three-tier passive monitoring framework designed to resolve this visibility challenge within timing-sensitive grid-edge infrastructure. By utilizing a Layer-3-unconfigured passive ingestion mode on bare-metal hardware via a physical switched port analyzer (SPAN) loop, the deep packet inspection engine is isolated from the production network, implementing a software-enforced unidirectional export policy. Performance validation conducted over a continuous audit comprising 32,927 active-monitoring round-trip time (RTT) samples yielded stable latency distributions across a laboratory power-monitoring loop running Modbus TCP and IEC 61850 MMS protocols. The measured latency delta between the unmonitored baseline and the active monitoring state was less than 0.12 milliseconds, supporting the feasibility of continuous high-fidelity security observation alongside stringent grid-edge metering timing bounds without measurably degrading the monitored reporting path.

0.31

Decentralized Latency Models and Information Flow for TSN Shapers - A Tutorial

cs.NI ·2026-10-08 ·Alexej Grigorjew, Stefan Geissler, Jürgen Schmitt, Tobias Hossfeld
similarity 0.51
Abstract · This work has been submitted to IEEE COMST for possible publication. Copyright may be transferred without notice, after which this version m…

Recent advancements in the fields of industrial automation and in-vehicle communication have also increased the requirements on their underlying networks. Traditional field bus technologies are being replaced by regular Ethernet devices with features from the IEEE Time-Sensitive Networking working group. Their standards are designed to achieve zero congestion loss and deterministic latency bounds, but the specific guarantees can differ depending on the shapers used and how the bounds are calculated. After several contributions to the standardization efforts, this work presents a number of decentralized latency models that can be applied locally on the switches, without requiring global knowledge from the rest of the network. It includes a formal definition of delay segments that allows to incorporate interoperability between different shapers and latency models in the future. It presents pseudo-code suggestions for the latency bounds computation of Strict Priority, Credit-Based Shaping, Asynchronous Traffic Shaping, and Cyclic Queuing and Forwarding, all of which can be applied locally on the devices. Finally, five models were implemented and evaluated with respect to their efficiency in terms of latency, jitter, and number of accepted streams. The results illustrate how different shapers are suited for different networks and traffic distributions.

0.32

5G CATS: 5G-Based Cryptographic Authorization Against Trafficking of Semiconductor Devices

cs.CR cs.NI ·2026-11-10 ·Sreevikram Rajaraman, Derek Ladd, Nicholas Heinrich-Barna, Srinivas Shakkottai, Jeyavijayan Rajendran
similarity 0.51
Abstract · 10 pages, 5 figures, 4 tables

Enforcing export controls on AI accelerators requires verifying where a chip operates after deployment. Round-trip time measurements can bound a chip's distance from a trusted landmark, but any jitter in honest replies forces the verifier to loosen its timeout, giving an attacker slack to relay traffic over fiber from a restricted region. Prior approaches either cross the untrusted host stack or rely on noisy power-line channels that inflate this slack. We present 5G CATS, a location certification system that pairs a co-packaged 5G radio, cryptographic engine, and hardware interlock on the GPU package with 5G Ultra-Reliable Low-Latency Communication (URLLC) base stations. Terminating the radio link inside the package removes the host software, PCIe fabric, and baseboard management controller from the verification path. We map an authenticated challenge-response protocol onto 5G's slot structure, replace permanent key erasure with short-lived execution leases, and specify a cross-check of the chip's reported serving cell against the carrier's own attachment records. In ns-3 and 5G-LENA simulations of an unloaded cell, our URLLC-based radio profile narrows the 99.9th percentile round-trip spread to 2.60 ms, more than ten times narrower than default 5G. A tracer rejects every round of a fiber relay from 300 km, against 2,000 km for default 5G. Against a 3,000 km attacker, a tracer stays safe at up to 1,410 km from the chip, against at most 619 km for PowerCATS's published model, while default 5G is never safe.

0.50