CS Paper Radar

YOCO: You Only Calibrate Once! Fast Mocap Calibration for Dexterous Teleoperation

Yu Zhang, Yunqi Li, Yushi Du, Yi Ma, Yanchao Yang

cs.RO ·submitted 2026-10-08 10:34 UTC · v1

Abstract

Dexterous teleoperation requires reliable human-hand state estimations. However, common low-cost motion-capture gloves and markerless trackers often exhibit biases that vary across users, glove fit, and recording sessions, degrading retargeting and demonstration quality. We present YOCO, a fast few-shot, fine-tuning-free calibration framework that corrects biased hand-pose streams from a small set of paired raw and target poses. Instead of optimizing a separate model for every operator or session, YOCO conditions a calibration HyperNet on the paired examples and predicts LoRA-style updates for a frozen MANO hand-estimation module, turning per-user calibration into a lightweight feed-forward adaptation step while preserving the geometric prior of MANO and the efficiency of a compact estimator. We train YOCO with synthetic drift augmentations on InterHand2.6M and evaluate on augmented InterHand sequences, offline real glove data, and dexterous teleoperation tasks. Across these settings, YOCO improves calibration efficiency, hand-state estimation quality and teleoperation performance compared with uncalibrated input and standard calibration baselines.

Comment
CoRL 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Gated Residual Body-Hand Coordination for Whole-Body Humanoid Teleoperation

cs.RO ·2026-09-16 ·Ruiming Wu, Shuang Li, Liding Zhang, Alois Knoll, Zhaopeng Chen
similarity 0.77
Abstract

Whole-body humanoid teleoperation commonly combines a motion-tracking policy with a separate dexterous-hand retargeter. However, independently generated commands do not explicitly preserve body-hand geometric relations, leading to mismatches in relative wrist poses and fingertip positions during bimanual interaction. We present a gated residual coordination framework that keeps both modules frozen and applies bounded corrections to their outputs. A motion-conditioned action gate allocates correction authority across joint groups, while reference-geometry-dependent reward gates emphasize relevant interaction objectives during training. To establish the nominal body controller on Agile One, we introduce multi-pose morphology calibration that jointly estimates triaxial scales and effector-local offsets, together with staged motion dataset curation for training a SONIC-based tracker. The residual policy uses human motion references, initial commands, and robot proprioception without explicit object or contact observations. In simulation, it reduces wrist and fingertip geometry errors by 39.2-56.3% over direct composition on held-out GRAB motions, while preserving whole-body tracking on AMASS, with success rates of 89.03% without residual coordination and 89.29% with it. Ablations characterize the contributions of reward gating, adaptive correction authority, and separate body and hand correction heads.

0.44

WinDEX: Metric 3D Hand Motion Reconstruction in the Wild for Dexterous Teleoperation and Policy Learning

cs.RO ·2026-11-16 ·Hongyu Ma, Hairong Qu, Shiqi Zhao, Yongsong Yang, Kai Shi +3 more
similarity 0.76
Abstract

Human manipulation data are widely used to train robots for human-like dexterity. However, low-cost, large-scale collection in the wild remains challenging. Existing methods remain limited in geometrically grounded metric-scale reconstruction, real-world generalization and inference speed. We present WinDEX, integrating (1) geometric-temporal optimization for metric 3D hand annotation from in-the-wild egocentric stereo videos, combined with visual-inertial SLAM for world-frame reconstruction; (2) WinDEX-Net, an end-to-end, fisheye-native network combining calibrated stereo, local detail and temporal context, with a data-model flywheel of model-assisted annotation and retraining; (3) distilled models for offline reconstruction and causal streaming, supporting reinforcement learning and teleoperation; and (4) low-cost CyberCap stereo-inertial capture, forming the WinDEX-Hand dataset with 1,000 hours of training annotations and held-out human-annotated in-the-wild 2D and independent optical motion-capture evaluation sets. Offline reconstruction runs at 43.61 FPS and causal streaming at 171 FPS. On held-out data, offline reconstruction achieves state-of-the-art accuracy: 14.5 pixels in-the-wild reprojection error and, with visual-inertial odometry, 37.29 mm world-frame joint error. We achieve 7.6 and 3.6 times the task success rates of reinforcement learning policies trained with WiLoR and HaWoR motion references, respectively, and demonstrate real-time arm-hand teleoperation. Project website: https://fruitrabbit.github.io/WinDEX/.

0.25

S2HAND: Accuracy-Preservation Trade-Offs for Hand Specialization in Whole-Body Pose Models

cs.CV ·2026-11-07 ·Singyu Muk, Xuanren Song, Kalin Stefanov
code/data similarity 0.74
Abstract · 39 pages, including appendices. Code and models: https://github.com/ronggong000/S2HAND

Unified whole-body pose estimators jointly predict body, face, and hand landmarks, but often degrade on small, blurred, or occluded hands. Attaching a standalone hand specialist introduces extra detection overhead, coordinate alignment, and wrist-stitching artifacts. We introduce S2HAND, a hand-specialized Sapiens2-5B framework that preserves the native 308-keypoint output interface. Specifically, S2HAND-MT adapts a lightweight 0.87M-parameter pose branch to route 40 finger heatmaps while strictly preserving the shared Transformer, auxiliary task heads, and the other 268 body, foot, and face heatmaps. S2HAND-Pose further fine-tunes three Fisher-selected Transformer blocks (267.13M parameters), trading exact preservation for stronger hand recovery: it lifts macro AUC from 57.83% to 65.73% across HInt TEST, COCO WholeBody VAL, and FreiHAND EVAL, and surpasses HInt-adapted Hand5/HRNet and stitched Hand5 systems on all five Native Pipeline benchmarks. On COCO, S2HAND-Pose improves hand AP by 12.89 points and body-plus-foot AP by 0.19 points. Across a 512-image multi-task audit, it maintains 99.60% foreground segmentation agreement with the public checkpoint, with quantified normal and pointmap drift. Its 2D coordinates also lower 3D mesh error in frozen Pose2Mesh transfer, while our optional TailGuard re-cropping module cuts S2HAND-MT's severe failure rate on NewDays from 13.45% to 10.43%. S2HAND thus resolves the whole-body hand bottleneck with either exact non-hand preservation (MT) or empirically audited trade-offs (Pose).

0.33

HandRSI: Recursive Self-Improvement for Hand Pose Estimation

cs.CV ·2026-11-17 ·Zhekai Wang, Luqing Luo, Wenhao Yao, Junjie Lu, Huanan Zhu +2 more
benchmarkcode/data similarity 0.73
Abstract · Technical report. 25 pages, 17 figures, 18 tables. Code: https://github.com/GinKenneth/Hand_RSI

Egocentric 3D hand pose estimators still miss hands at the image border, misplace occluded hands and jitter. Such failures are usually fixed by hand-written inference refinements and by fine-tuning, two interdependent steps that are tuned separately. We present HandRSI, a recursive self-improvement framework for a hand pose system that consists of a video estimator and its executable inference harness. In each round, coding agents refine the harness, and a change is accepted only if it improves a composite of all ten benchmark metrics on held-out data without significantly regressing any of them. The accepted harness then guides the estimator through selective distillation, which supervises hand presence and temporal consistency on frames without ground truth, while ground truth supervises pose. Since the updated estimator may change which refinements remain useful, the harness is re-validated on it. Starting from the released ACE-Ego-Hand model, five rounds reduce MPJPE-p by 35% on HOT3D and 11% on ARCTIC and roughly halve jitter. On HOT3D, HandRSI's MPJPE-p is 16% lower than that of ACE-Ego-Hand fine-tuned on the same ground truth. Under a unified protocol, it outperforms nine re-run published methods on all ten metrics of both benchmarks. Hypervolume selection on the accuracy-speed front yields Lite, Medium and Heavy systems running at 20.7 to 41.1 FPS. This report gives the full method, every stage of every round and the complete protocol. Code, evaluator, harnesses and weights are public.

0.47

DexOAK: Object-Aware Kinematic Retargeting

cs.RO ·2026-10-19 ·Federica Spinola, Robert Katzschmann, Cordelia Schmid
code/data similarity 0.70
Abstract · 11 pages, 4 figures, 11 tables. Project page: https://fspinola.github.io/dexoak/

We introduce DexOAK, a learning-based object-aware kinematic retargeting framework for generating contact-consistent robot hand references from human motion-capture data. DexOAK first minimizes an interaction-graph Laplacian objective over a joint hand-object graph, so the robot reproduces the demonstrated object-relative interaction geometry rather than the human hand pose alone. These per-frame solutions form seed retargeted references, from which a feed-forward network conditioned on human keypoints and object point clouds learns the retargeting function. Object-aware finetuning then refines the network under contact, non-penetration, and self-collision losses that position the fingers on the demonstrated contacts and reduce artifacts destabilizing physics-based refinement. Once trained, the network transfers to unseen data by inference alone, without per-frame optimization. DexOAK references improve dynamic retargeting over the state-of-the-art across bimanual tasks with rigid and articulated objects. On the Inspire hand, success rises from 39.5% to 48.4% on OakInk-v2, and ADD-AUC rises from 62.7% to 77.9% on ARCTIC. Ablations trace the gains to object-aware kinematic retargeting and the amortized network refined with contact losses. Trained on OakInk-v2, it transfers to ARCTIC zero-shot and nears in-domain performance after fine-tuning. On hardware, 46/56 open-loop replays succeed across five tasks, enabling dexterous robot data generation from human data. Visualizations and interactive results are at: https://fspinola.github.io/dexoak/.

0.32

Pre-training Visual Dexterity in Simulation

cs.RO cs.AIcs.CV ·2026-08-16 ·Sarthak Kamat, Adam Rashid, Satvik Sharma, Aseem Doriwala, Chelsea Finn +2 more
code/data similarity 0.70
Abstract · Project page: https://spd.bot

Large-scale pre-training has made robot policy fine-tuning increasingly data-efficient, but this progress has largely been driven by datasets and embodiments built around simple parallel-jaw grippers. Dexterous, multi-fingered hands remain comparatively data-starved because real teleoperation is costly to scale, while human hand video is off-embodiment and requires lossy pose estimation and retargeting. We introduce Simulation Pre-training for Dexterity (SPD), a pre-training framework for dexterous manipulation that uses data entirely collected in simulation. In SPD, humans manipulate virtual objects inside a VR headset, enabling on-embodiment trajectories and robot-free collection. With the help of five operators, we collect 75 hours of multi-task dexterous manipulation over one week, and use it to pre-train a causal transformer on a sequence modeling objective. We study the benefits of simulation pre-training on real-world tasks by fine-tuning on 1-2 hours of physical demonstrations on a 56-DoF bimanual dexterous setup. We find that our approach outperforms training behavior cloning policies from scratch, showing that simulation teleoperation is a viable pre-training source for real-world dexterous manipulation. We perform ablation studies, measuring the benefits of history conditioning and short action chunks for reactive control.

0.20

AutodidactWAM: Cross-Modal Self-Distillation from Generated Video to Robot Actions

cs.RO ·2026-10-06 ·Sergei Kurchev, Iaroslav Kolomiets, Miguel Altamirano Cabrera, Artem Lykov, Dzmitry Tsetserukou
published similarity 0.70
Abstract · 8 pages,3 figures, 1 table, ICRA 2027 submitted

World-action models (WAMs) such as Cosmos 3 jointly generate future video and robot actions from an observation and instruction. Adapting one such model with a lightweight LoRA fine-tune to a previously unseen robot, a Unitree G1 humanoid with five-fingered BrainCo hands, exposes a video-action asymmetry: the video renders plausible task executions, while the co-generated action is systematically mis-targeted. We evaluate closed-loop real-robot trials at three cumulative stages: pre-grasp, grasp, and pick-and-place. The native action succeeds only approximately 17%, 10%, and 7% of the time, respectively, and performs worse on held-out objects. We propose AutodidactWAM, a hand-pose estimator trained without teleoperation, followed by inverse kinematics, that runs on the model's generated video to recover action estimates. Paired with the native prediction, these recovered actions provide preferred targets for fine-tuning only the action-related layers, while the generated video is teacher-forced. We compare supervised relabeling with a rectified-flow adaptation of Diffusion-DPO. After one-time embodiment adaptation, self-distillation requires no additional task-specific teleoperation. The recovered-action gate reaches approximately 75%, 47%, and 42% pre-grasp, grasp, and pick-and-place success, compared with 17%, 10%, and 7% for the native action. A hybrid objective combining preference supervision, supervised target fitting, and Cartesian trajectory anchoring (DPO+SFT+DTW) performs best: on Oreo, the training object, it reaches 90% pre-grasp and 20% full-task success; on a held-out object, it reaches 80% and 30%. Plain Flow-DPO reaches 0% success despite 1.000 validation preference accuracy, indicating that the combination of training objectives, rather than the contrastive objective alone, drives the observed gains.

0.31

TransHands: Repurposing Human Pose Encoders as Hand Pose Encoders

cs.CV cs.AI ·2026-08-23 ·Milo Piccioli, Gianluca Amprimo, Claudia Ferraris, Gabriella Olmo
similarity 0.70
Abstract

Lifting 3D hand poses from 2D monocular representations remains challenging due to the limited availability of large-scale, diverse 3D-annotated hand datasets, in contrast to the abundance of human body motion data. We address this limitation by transferring motion representations learned from large body pose corpora to the hand domain. We introduce TransHands, a backbone-agnostic transfer learning framework that enables pre-trained human motion encoders to be effectively adapted for 3D hand pose estimation from 2D pose inputs. Rather than training hand-specific biomechanical models from scratch, TransHands combines a two-stage training and fine-tuning strategy with a lightweight hand-specific input adaptation module that aligns hand kinematics with the representation space learned for full-body motion. We evaluate TransHands across four state-of-the-art motion modeling architectures, including transformer-based, graph-based, and frequency- domain models. Results demonstrate that motion priors learned from body pose data transfer consistently across architectures, yielding consistent accuracy gains, strong cross-domain generalization, particularly in challenging egocentric settings, and applicability for downstream tasks in real-world contexts.

0.14