CS Paper Radar

DexOAK: Object-Aware Kinematic Retargeting

Federica Spinola, Robert Katzschmann, Cordelia Schmid

cs.RO ·submitted 2026-10-19 17:20 UTC · v1
code/data

Abstract

We introduce DexOAK, a learning-based object-aware kinematic retargeting framework for generating contact-consistent robot hand references from human motion-capture data. DexOAK first minimizes an interaction-graph Laplacian objective over a joint hand-object graph, so the robot reproduces the demonstrated object-relative interaction geometry rather than the human hand pose alone. These per-frame solutions form seed retargeted references, from which a feed-forward network conditioned on human keypoints and object point clouds learns the retargeting function. Object-aware finetuning then refines the network under contact, non-penetration, and self-collision losses that position the fingers on the demonstrated contacts and reduce artifacts destabilizing physics-based refinement. Once trained, the network transfers to unseen data by inference alone, without per-frame optimization. DexOAK references improve dynamic retargeting over the state-of-the-art across bimanual tasks with rigid and articulated objects. On the Inspire hand, success rises from 39.5% to 48.4% on OakInk-v2, and ADD-AUC rises from 62.7% to 77.9% on ARCTIC. Ablations trace the gains to object-aware kinematic retargeting and the amortized network refined with contact losses. Trained on OakInk-v2, it transfers to ARCTIC zero-shot and nears in-domain performance after fine-tuning. On hardware, 46/56 open-loop replays succeed across five tasks, enabling dexterous robot data generation from human data. Visualizations and interactive results are at: https://fspinola.github.io/dexoak/.

Comment
11 pages, 4 figures, 11 tables. Project page: https://fspinola.github.io/dexoak/

Closest papers

Nearest neighbours by meaning across the whole index.

OATH: Object-Agnostic Tracking for Dexterous Hands, Enabling Rapid Physics-based Retargeting

cs.RO ·2026-10-09 ·Solvin Sigurdson, Prasanna Sriganesh, Juan Borbon, Joel Burdick, Dingqi Zhang +1 more
code/data similarity 0.79
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://multiplylabs.github.io/oath/

Retargeting human demonstrations into dynamically feasible dexterous hand trajectories requires resolving complex contact physics, yet current methods either omit physical constraints or rely on computationally expensive sampling-based optimization in simulation. Reinforcement learning has previously been used to achieve planning and control through contact dynamics; however, standard policies require object-specific training and fail to generalize across arbitrary geometries. This work reframes physics-based retargeting as a residual learning problem, where we demonstrate that zero-shot generalization across objects relies on structured state representations. Specifically, formulating the observation space to include a localized contact-error signal guiding each robot link to its target coordinate on the object surface enables a single, unified residual policy to successfully grasp novel, unseen object geometries. Rolling out this policy in simulation on a kinematic reference trajectory yields a physics-based retargeter, OATH. Operating at 0.4 seconds of compute per second of reference, OATH achieves 2.4x faster-than-real-time performance and a 60-350x reduction in computational cost compared to sampling-based methods. The system recovers 58% of held-out and 54% of unseen-object DexYCB trajectories while maintaining a sub-2 cm tracking error.

0.29

DexHOT: Learning Hand-Object Configuration Transfer for Dexterous Manipulation

cs.RO ·2026-11-03 ·Zhewei Gui, Anthony Bolton, Jiyao Zhang, Zeyuan Chen, Qiyang Yan +2 more
similarity 0.78
Abstract · 9 pages, 4 figures

Dexterous manipulation involves not only moving objects, but also arranging the hand around them to maintain useful contacts and enable subsequent actions. Yet many learning-based systems specify goals primarily through object poses or trajectories, leaving hand-object configurations to emerge implicitly. We introduce DexHOT, which formulates dexterous manipulation as hand-object configuration transfer: moving between feasible configurations that jointly specify hand articulation and object pose relative to the wrist. DexHOT learns a reusable relation-conditioned transfer primitive from synthetic feasible configuration pairs, without human reference motions, and composes long-horizon behaviors through closed-loop tracking of configuration subgoals. On DexHOTBench with 120 objects, a single policy achieves 80.5% transfer success on seen objects and 69.4% on unseen objects; on a real dexterous hand, it achieves 61.5% success over 200 real-robot transfers and 90% task success across six demonstration-guided tasks. These results show that explicit hand-object goals provide an expressive and composable interface for dexterous manipulation. More details and videos are available at https://dex-hot.github.io/.

0.27

ReForce: Learning Force-aware Retargeting for Dexterous Manipulation

cs.RO ·2026-08-16 ·Yuhang Wu, Lingqi Zeng, Changwei Jing, Jianglong Ye, Xiaolong Wang
similarity 0.77
Abstract

Human demonstrations offer a scalable data source for dexterous manipulation, but transferring them to robot actions remains challenging due to the embodiment gap. Today's retargeting is mostly kinematic, yet manipulation is decided by force, which governs how the hand interacts with the object and how the object moves. In this paper, we present ReForce, a Force-aware Retargeting method that turns human motion and forces into robot actions that reproduce the intended contact. ReForce predicts a residual on the kinematically retargeted action to reach the desired force, using a general force tracker trained on large-scale simulation interactions. It supports both online force-aware teleoperation and offline data translation. In simulation and on real hardware, ReForce achieves lower force-tracking error and stronger multi-finger contact engagement on contact-rich tasks such as paper-cup grasping and tongs manipulation.

0.41

DexTaG: Tactile-as-Guidance in Reinforcement Learning for Dexterous Manipulation

cs.RO ·2026-09-27 ·Han Yang, Yian Wang, Yunlong Song, Zhenjia Xu, Chuang Gan
similarity 0.77
Abstract

Glove-based motion capture is emerging as a scalable approach to collecting dexterous-hand demonstration data. However, due to the kinematic gap between the human and robot hand, the recorded human motions cannot be executed directly on the robot, especially for contact-rich tool-use tasks involving in-hand reorientation. Prior work bridges this gap in simulation through reinforcement learning (RL) or trajectory optimization, but the human contact pattern is hard to preserve under such formulations, often producing unnatural manipulation and unstable functional grasps. These methods also train a separate policy or solve a separate optimization for each reference trajectory, which is inefficient. To solve these problems, we propose DexTaG, a tactile-guided RL framework for dexterous manipulation. During training, tactile signals captured by the glove guide policy search toward the measured human contact pattern, reducing reliance on precise reference geometry for contact supervision. To improve efficiency, we train a single generalizable retargeter jointly on all training trajectories of the same object. The retargeter is further distilled into a tactile-free student controller conditioned on the target object trajectory for real-world deployment. On marker-pen and hammer manipulation tasks, DexTaG learns natural, contact-rich behaviors that baselines with distance-based contact heuristics fail to learn, generalizes to held-out trajectories of the same object and task, and outperforms single-trajectory baselines on OakInk2.

0.19

FlashDexRetarget: Accelerating Dexterous Manipulation Data Generation through Multi-Motion Retargeting

cs.RO ·2026-10-01 ·Kyungmin Lee, Sibeen Kim, Dongyoon Hwang, Yoonsang Oh, Donghu Kim +4 more
benchmark similarity 0.76
Abstract

Human hand-object demonstrations provide a scalable source of data for dexterous robot learning, but transferring them across embodiments requires physically feasible retargeting. Existing physics-based methods typically optimize each demonstration independently, leading to either limited success under finite simulation budgets or training costs that grow with dataset size. We introduce FlashDexRetarget, an RL framework for multi-reference dexterous retargeting. We formulate retargeting as multi-reference tracking, jointly learning a single policy across many demonstrations with off-policy RL and geometric supervision of the demonstrated interactions. This shared training formulation amortizes optimization across references while enabling the policy to track diverse hand-object interactions. On a 50-motion benchmark from TACO, OakInk2, and HOT3D using XHand and Sharpa Wave Hand as target embodiments, FlashDexRetarget retargets 90% of demonstrations using about 30 GPU-hours, compared with about 46% at about 3,000 GPU-hours for CHORD. This corresponds to about 100 times lower training compute and a 44-percentage-point improvement in retargeting success. Ablations examine the key design choices, while experiments with up to 1,000 motions and real-world replay further demonstrate the scalability and practical applicability of our method.

0.16

Weave: Learning Whole-Body Dexterous Loco-Manipulation from Human-Object Interactions

cs.RO cs.AIcs.LG ·2026-09-15 ·Liu Cao, Xingze Wu, Jingzhi Cui, Botian Xu, Mingzhi Pei +2 more
similarity 0.76
Abstract · 10 pages, 5 figures. Project website: https://xiaohu-art.github.io/Weave/

Learning humanoid-object interaction requires coordinating whole-body balance, locomotion, and dexterous hand contact to control both robot and object motion. Human demonstrations provide examples of coordinated interaction, but transferring these behaviors to humanoid robots requires learning how to establish and maintain effective contacts under different embodiments and dynamics. We present Weave, a unified framework for learning whole-body dexterous humanoid-object interaction from captured human demonstrations. Weave first converts captured human-object interactions into executable robot-object references through contact-aware retargeting and approach-motion completion. At its core is a contact- and geometry-aware policy that jointly commands 29 body joints and 12 actuated finger joints across multiple objects and interaction sequences. Evaluation across nine objects yields a 92.5% success rate on trained interactions and, without any additional training, 65.0% on sequences never seen during training. We additionally release ~9,000 physically executed rollouts spanning ~23 hours, providing robot-object trajectories with contact annotations for downstream interaction-policy learning and physically consistent HOI motion generation. Project website: https://xiaohu-art.github.io/Weave/

0.57

Touch2Robot: Robot Touch in the Human Demonstration Loop

cs.RO cs.AI ·2026-09-21 ·Shengcheng Luo, Xiaoyang Cheng, Hong Ying, Xiaoying Zhou, Jiaming Jiang +4 more
similarity 0.76
Abstract · 12 pages, 13 figures

Human demonstrations offer a scalable way to collect manipulation data, but their contacts may be unstable or infeasible when transferred to a robot hand. Collecting demonstrations directly on the target robot avoids this mismatch but substantially increases the cost of data collection. To address this trade-off, we present Touch2Robot, a framework that lets humans collect demonstrations while seeing how the target robot hand would contact the object. We capture human hand motion, tactile-glove measurements, and object motion during human manipulation. These recordings guide object-specific RL policies to reproduce the demonstrated object motion while favoring contacts consistent with the recorded human touch. We distill the learned behaviors into a unified real-time retargeter that maps incoming human observations and object geometry to robot hand configurations. During collection, the predicted robot configuration is synchronized with the tracked object pose in simulation to reconstruct robot-object contacts, which are visualized to help the demonstrator adapt subsequent interactions to the target hand. Across four real-world tasks, Touch2Robot improves average real-robot replay completion from 37.9% to 72.1% over visual-only feedback, while reducing the collection time per replay-successful demonstration from 58.6s to 18.2s. Reconstructed target-hand contacts achieve 44.2% F1 against real-robot tactile measurements, and policies trained on Touch2Robot demonstrations improve downstream Diffusion Policy performance by 29.1 percentage points over visual-only feedback. These results show that bringing robot touch into the human demonstration loop improves both the quality and efficiency of scalable dexterous data collection. Project webpage: https://Touch2Robot.github.io/.

0.52

DexForge: High-Fidelity Physics-Informed Dexterous Retargeting

cs.RO ·2026-10-05 ·Meizhong Wang, Kun Cao, Ruiqi Ni, Lihua Xie, Yiguang Hong
code/data similarity 0.75
Abstract

Human demonstrations offer rich examples of precise dexterous manipulation and a promising source of robot training data. However, high-fidelity reproduction of demonstrated motions and hand-object interactions across robot embodiments remains challenging under physical constraints. We present DexForge, a differentiable physics-grounded framework for converting human video demonstrations into high-fidelity robot trajectories. We reconstruct spherical-Gaussian object models and hand-object motion from visual observations, then build a differentiable simulator combining efficient Gaussian collision detection with existing differentiable dynamics. Based on this simulator, DexForge combines contact-aware kinematic retargeting with force-aware dynamics retargeting: robot-adapted stable contacts guide kinematic reference construction and subsequent gradient-based control refinement for precise physical motion reproduction. Experiments on 130 DexYCB and HOT3D demonstrations across seven dexterous hands show success-rate gains of approximately 35-53 percentage points over the baseline, with object position and orientation tracking errors on successful trajectories reduced by approximately 34-67% and 71-78%, respectively. Further experiments demonstrate open-loop transfer to MuJoCo and real-robot execution. Our project page is available at https://wmz1226.github.io/DexForge/

0.24