CS Paper Radar

Secure Aggregate Encryption with Identity-Based Authentication for Multi-Vendor FPGA Cloud Deployment

Mukta Debnath, Krishnendu Guha, Debasri Saha, Amlan Chakrabarti, Susmita Sur-Kolay

cs.CR ·submitted 2026-10-08 12:46 UTC · v1

Abstract

Secure deployment of FPGA bitstreams in heterogeneous multi-vendor cloud infrastructures requires scalable authorization, authenticated device access, and bitstream protection throughout the deployment lifecycle. Existing approaches typically address these functions through separate mechanisms, increasing coordination and key management requirements. This paper presents SAEID, a secure FPGA deployment framework that integrates aggregate authorization, certificate-free identity-based device authentication, and identity bound bitstream verification within a pairing based cryptographic framework, with symmetric cryptography used for session binding and AES 256 GCM based bitstream protection. Building on AgEID, an aggregate encryption scheme that enables individual decryption for authorized FPGA devices, SAEID extends the underlying framework to heterogeneous multi vendor deployments by supporting multiple FPGA vendors and IP providers, capability-aware authorization, and dynamic device membership. SAEID provides protection against unauthorized access to future deployments after device revocation and to prior deployments by newly enrolled devices, while retaining constant-size aggregate ciphertexts within each vendor domain and individual decryption. Experimental results demonstrate the practical performance of SAEID, with identity-based device authentication completing in approximately 4.35 ms and device membership updates requiring 4.95 to 5.09 micro seconds for device addition. The aggregate-encryption component exhibits scalable behavior with increasing device-set size. The complete SAEID software decryption path was also validated on a physical ZC702 Cortex A9 platform, requiring 191.126 ms. These results demonstrate scalable aggregate authorization with bounded authentication and dynamic-membership overhead for secure multi-vendor FPGA deployment.

Closest papers

Nearest neighbours by meaning across the whole index.

Vaulted Passkeys: A Device-Bound Proposal for Authenticated Credential Export and Import

cs.CR ·2026-08-13 ·Pol Henarejos
similarity 0.65
Abstract

Hardware authenticators deliberately resist private-key extraction, yet replacement, disaster recovery, and controlled migration create a legitimate need for portability. Existing guidance for device-bound credentials commonly reduces recovery risk by registering an additional authenticator before failure. That creates an independent credential registration and requires replacement hardware to exist in advance; it is redundancy, not a backup of the original credential. This paper addresses the resulting recovery gap by exporting protected credential state while the source is available and restoring it to hardware acquired later, without cloning a complete authenticator or exposing plaintext private keys to routine desktop software. We propose Vaulted Passkeys, a device-bound architecture in which a random 256-bit Kvault protects authenticated PKV1 credential envelopes through HKDF-separated keys and four explicit AEAD profiles. The design separates enrollment from export/import and the required vault from optional identity. We contribute a role-separated system model, wire format, threat analysis, implementation mapping, and falsifiable evaluation plan. The prototype demonstrates feasibility but is neither a formal security proof nor a proposed final standard.

0.04

SecDT: A Profile-Based Security Layer for TRDP Communications

cs.CR cs.NI ·2026-09-02 ·Erlantz Alonso, Igor Lopez, Jasone Astorga
published similarity 0.63
Abstract · In proceedings of IEEE Future Networks World Forum 2026

The Train Real-time Data Protocol (TRDP) is widely used on rolling stock but it provides limited native support for cryptographic protection. Furthermore, the multicast traffic profile used in TRDP Process Data to exchange critical information between onboard subsystems makes the introduction of cryptographic protection a challenge. This paper presents a lightweight security layer for secure TRDP communication that implements a number of security profiles built around modern cryptographic algorithms. This additional layer relies on an On-board Key Management System (OKMS) for both security profile negotiation, dynamic key distribution and key lifecycle management. The security profiles allow for cryptographic agility and flexibility, ranging from simple authentication to Authenticated Encryption with Associated Data (AEAD) algorithms. The security profile negotiation procedure guarantees all TRDP End Devices (ED) on a common Communication ID (ComID) share the same security profile and can therefore process each other's messages. A prototype implementation based on mbedTLS and Arm Platform Security Architecture (PSA) was developed and evaluated. Experimental results demonstrate manageable overhead, suitable for the real-time and time-sensitive communication found on rolling stock.

0.35

BioBind: Binding Biometric Deduplication to Zero-Knowledge Authentication

cs.CR ·2026-11-09 ·Taotao Wang, Xiaoxiao Wu, Shengli Zhang
code/data similarity 0.60
Abstract · 29 pages, 7 figures, 19 tables. Supplementary material included as Appendices A-H. Code and artifact: https://github.com/plan-lab-szu/biobin…

Biometric identity systems for decentralized applications need credentials that resist repeated enrollment and support private, publicly verifiable authentication. Capture and large-scale private deduplication run off chain while smart contracts authorize issuance and use; these stages span distinct trust domains, and a correct verdict covers only the checked inputs and gallery snapshot. Without binding and state checks, concurrent enrollments can issue duplicate credentials from correct verdicts, while substituted inputs can authorize unrelated credentials. We present BioBind, a protocol whose four backend interface conditions bind the deduplication query, gallery insertion and issued commitment to one captured vector, authenticate gallery transitions, and require a sound uniqueness verdict valid at finalization. Its encrypted instance uses bound requests, stale-session rejection and committee-confirmed migration. Capture-bound zero-knowledge authentication links credential use to the enrolled template and a fresh device-originated probe bound to the challenge. We give a conditional multi-session composition argument under explicit capture, backend and cryptographic assumptions. A prototype using LFW face features rejects the tested composition attacks; its unlinkable authentication circuit uses 31,445 constraints and about 305,000 gas. An equal-public-field baseline quantifies the cost of verifiable matching: witness-plus-proving medians are 1.989 s versus 1.119 s with device-trusted matching. Separate tests of encrypted enrollment complete three histories of 16,384 registrations without decoding errors at the tested checkpoints. Biometric accuracy bounds person-level uniqueness: on the Bosphorus database, cooperative subjects who change appearance evade deduplication in 1.8% of re-enrollment attempts at the operating threshold. Full backend integration remains open.

0.55

FPGA Acceleration of Fully Homomorphic Encryption with Adaptive Key Switching

cs.CR cs.AR ·2026-09-08 ·Zhihan Xu, Jayashree Adivarahan, Rajgopal Kannan, Viktor K. Prasanna
published similarity 0.59
Abstract

Fully Homomorphic Encryption (FHE) enables privacy-preserving cloud services but incurs substantial computation overhead, making hardware acceleration essential. Among FHE operations, key-switching is a major performance bottleneck. Recent cryptographic advances introduce a novel key-switching method (i.e., KLSS) that reduces certain operational complexity but demands higher computational precision than the traditional Hybrid Key Switching (HKS) method. This trade-off leads to distinct computation and memory requirements, making the relative latency of KLSS and HKS highly dependent on hardware parallelism, FHE security parameters, and available on-chip memory capacity, particularly on FPGA platforms, where memory resources and parallelism must be carefully balanced. In this work, we first propose a memory-efficient KLSS datapath that eliminates off-chip ciphertext transfers. We then develop a performance model to analyze and compare the overheads of both KLSS and HKS. Our analysis reveals that an adaptive solution supporting both methods can achieve lower overall latency than a static method during FHE computation. Guided by the performance model, we design an adaptive FPGA-based FHE accelerator that dynamically selects between HKS and KLSS during computation. We implement the accelerator on an Alveo U280 and evaluate it across multiple FHE benchmarks. Experimental results demonstrate that our adaptive solution achieves a 1.84-3.31$\times$ speedup in bootstrapping latency and a 1.66-2.52$\times$ speedup in secure image classification compared to state-of-the-art FPGA accelerators.

0.35

Transparent Identity Verification Approach Using MPC and Efficient Credential Status Handling

cs.CR cs.ET ·2026-09-12 ·Istiaque Ahmed, Shoji Kasahara, Kentaroh Toyoda, Tadashi Nakano, Thi Hong Tran
similarity 0.59
Abstract · We will run more experiment and validate more to produce quality research work

A secure and privacy-preserving identity verification process is essential for digital ecosys- tems. Current eKYC frameworks that rely on Zero-Knowledge Proofs (ZKPs) face high computational cost, rigid circuit design, complex integration, and expensive on-chain verification. The W3C 2021 BitString- based credential status mechanism also suffers from inefficient updates and poor scalability in large- scale deployments. We propose a transparent and cost-effective identity verification framework based on Multi-Party Computation (MPC). It enables private off-chain code execution and produces runtime proofs anchored to a blockchain. The framework introduces a multidimensional bit-matrix model with efficient compression. Using ZSTD, the credential data is reduced to 76 bytes compared to 140 bytes with GZIP, cutting storage and bandwidth costs. The system also supports fine-grained status updates and Layer-2 blockchain anchoring for tamper-evident, low-cost verification. The system employs reusable verifiable presentations (VPs) with unique access tokens, enabling cost-free verification and stronger access control. Selective disclosure preserves user control and strengthens privacy. Finally, the system integrates SHA3 hashing and Falcon post-quantum signatures. This guarantees robustness against quantum attacks, transparency, and scalability. It is a future-proof solution for national-scale identity verification, as demonstrated by experimental findings and security studies that validate its robustness and applicability.

0.13

InterSAGE: The Secure and Verifiable Interoperability Protocol for An Internet of Agents

cs.CR cs.MAcs.NI ·2026-08-13 ·Zhenhua Zou, Sheng Guo, Qiuyang Zhan, Lepeng Zhao, Shuo Li +1 more
similarity 0.58
Abstract · 35 pages, 4 figures, 7 tables. Positioning paper

The emerging Internet of Agents enables LLM-powered agents to discover peers, invoke tools, and delegate tasks across organizational boundaries. Existing protocols increasingly define how agents exchange messages, but not how an agent proves its identity, authorization, advertised capabilities, or accountability after delegation. We present InterSAGE, a trust-native protocol suite that supplies this missing security substrate alongside, rather than in place of, communication protocols. InterSAGE comprises four layers: Persistent Identity, Discovery, Trust Negotiation, and Accountability. Its four core primitives are: (1) Agent Identity Cards that bind developer, code package, operator, and deployment context; (2) capability-aware discovery using DID-bound Verifiable Credential manifests; (3) trust negotiation combining monotonic capability attenuation with two-tier access control; and (4) kernel-mediated cryptographic audit trails that bind usage, delegation, and execution traces to agent identity without a consensus ledger. InterSAGE is designed to complement MCP, A2A, ANP, and AG-UI, allowing communication protocols to evolve independently while keeping trust semantics explicit, portable, and verifiable. We compare InterSAGE with more than 50 efforts spanning agent protocols, decentralized identity, OAuth/OIDC extensions, zero-trust governance, delegation, and audit architectures. We show that no prior architecture jointly enforces persistent identity, capability-aware discovery, trust negotiation, and accountability as a unified four-layer trust substrate for secure agent interoperability.

0.10

Automotive HSMs - Architectural Challenges and Security Implications

cs.CR cs.ARcs.ET ·2026-08-25 ·Krishna Teja Medam, Austin Bruce
similarity 0.57
Abstract

Automotive electronic control units (ECUs) increasingly depend on hardware-rooted security to protect software integrity, authenticity, and lifecycle management in the presence of remote and physical threats. Hardware Security Modules (HSMs) have become a key building block in automotive system-on-chips (SoCs), providing isolated cryptographic services, secure key storage, and controlled execution under stringent real-time and cost constraints. This paper presents an architectural analysis of automotive HSMs and examines their role in establishing secure boot and hardware roots of trust. We first survey common HSM integration models used in production ECUs and discuss their flexibility and current automotive use cases. We then introduce realistic threat models to motivate hardware-backed security controls and analyze how HSM design choices influence secure boot chains of trust, secure storage, secure execution, and software signing mechanisms. Key tradeoffs between isolation, performance, updateability, and attack surface are discussed, with optional consideration of side-channel implications. The paper concludes by highlighting open challenges and future directions for scalable and resilient automotive hardware security. Finally, we discuss emerging challenges such as cryptographic agility and post-quantum readiness that are likely to shape the next generation of automotive HSM architectures.

0.20

Zeppelin: Client-Side BFV Encryption and Decryption for Helium-Powered Microcontrollers

cs.CR cs.AR ·2026-10-06 ·Muhammad Saif ul Islam, Karar Haider, Manaal Malik, Naveed Anwar Bhatti, Muhammad Ali Siddiqi
similarity 0.57
Abstract

The growth of the Internet of Things (IoT) has raised concerns over the privacy of data collected by resource-constrained sensing devices. Homomorphic encryption (HE) addresses this by letting a device encrypt its data once and an untrusted cloud server compute on the ciphertext without seeing the values. In practice, HE's memory and computational cost have kept it out of reach of microcontroller-class devices. Prior work, SEAL-Embedded, made this feasible using CKKS, but left three gaps: its arithmetic is entirely scalar, even on hardware with a vector instruction set; it never decrypts on the device, so the client cannot consume a result; and it does not explore BFV, whose encoding uses only integer arithmetic and decrypts exactly. We present Zeppelin, the first HE library to use an embedded vector instruction set, the first to support both encryption and decryption on an embedded device, and the first BFV implementation on MCU-class hardware. Zeppelin vectorizes the number-theoretic transform, HE's main bottleneck, for ARM's Helium extension, and includes a decryption procedure that avoids large-integer arithmetic and timing leakage of the secret key. A server-side adapter converts Zeppelin's ciphertexts into a format compatible with Microsoft SEAL, so the device handles encryption and decryption while the server performs all homomorphic computation. On an STM32N6 MCU with an ARM Cortex-M55, Zeppelin encodes and encrypts 4096 packed values in 4.76 ms (seeded symmetric, 128-bit security per the HE standard) and decrypts and decodes the result in 5.38 ms, using under 500 KB of RAM, with the vectorized NTT engine ${\sim}2.7\times$ faster than an equivalent scalar implementation on the same core.

0.32