CS Paper Radar

Statistical Analysis of 3D Ambiguity Functions for Random MIMO-OFDM Signals

Pinjun Zeng, Yuyang Lu, Jialan Tang, Xiaoyang Chen, Yifeng Xiong, Fan Liu, Shi Jin

eess.SP ·submitted 2026-10-08 15:39 UTC · v1

Abstract

Random communication symbols allow integrated sensing and communications (ISAC) systems to exploit payload signals for sensing, but the resulting matched-filter response varies with the transmitted data. Existing statistical analyses of sensing with random orthogonal frequency division multiplexing (OFDM) waveforms have largely focused on delay and Doppler, while the spatial dimension introduced by multi-input multi-output (MIMO) arrays and precoding has received much less attention. This paper develops a three-dimensional ambiguity function (3D-AF) for random MIMO-OFDM waveforms over delay, Doppler, and angle domains. For point-target sensing, we express the 3D-AF as a quadratic form of the random communication symbols, with a deterministic matrix that captures the delay and Doppler shifts, the transmit and receive array responses, and the precoders on different subcarriers. Based on this representation, we derive a closed-form expression for the expected squared 3D-AF and show explicitly how the constellation fourth-order moment (or kurtosis) affects the ambiguity sidelobes. The same characterization yields expected integrated sidelobe level (EISL) and expected sidelobe level (ESL) metrics over mixed delay-Doppler-angle search domains. The framework is further extended to coherent multi-symbol processing with slow-time Doppler, leading to the corresponding fast-slow time (FST) approximation. These results provide a statistical characterization of the sensing ambiguity induced by random MIMO-OFDM communication signals in delay, Doppler, and angle.

Comment
15 pages, 6 figures, 1 table

Closest papers

Nearest neighbours by meaning across the whole index.

Statistical Ambiguity-Function-Aware Joint Beamforming and Subcarrier Allocation for MIMO-OFDM ISAC under Random Symbols

eess.SP ·2026-10-15 ·Wonill Kim, Yumin Kim, Hyeonsu Lyu, Hyun Jong Yang
theory similarity 0.76
Abstract · 13 pages, 9 figures. Submitted to IEEE Transactions on Wireless Communications

Ambiguity function (AF) characterizes the delay--Doppler sidelobe structure that governs target resolution and masking in radar sensing. In ISAC, however, random communication symbols make the AF data-dependent, complicating its characterization and incorporation into transmit design. This raises a fundamental question: which AF characteristic can be effectively controlled through beamforming in a practical multiuser multitarget (MUMT) MIMO--OFDM system? To answer this, we statistically characterize the discrete-periodic AF (DP-AF) and derive an exact closed-form expected sidelobe level (ESL). We observe that nonzero-Doppler ESL cuts are delay-flat and the full two-dimensional integrated sidelobe level ratio (ISLR) is invariant to beamforming, whereas the zero-Doppler peak-to-sidelobe ratio (PSLR) remains controllable. We accordingly formulate an AF-aware joint beamforming and subcarrier-allocation problem with target-wise PSLR and illumination constraints. Since the direct PSLR constraint is intractable, we characterize its global optimum and prove that, for symbol kurtosis greater than one, the PSLR is maximized if and only if each target-wise directional-power profile is flat across subcarriers. We then introduce the coefficient of variation (CV) to measure deviation from this flatness and derive tight CV-dependent PSLR bounds. The lower bound yields a convex sufficient constraint for a desired PSLR, enabling an efficient reformulation. Simulations show $9.4$--$11.0$ dB worst-case PSLR gains over communication-only beamforming at the flat-spectrum point with a $2.4$--$5.9\%$ sum-rate loss. The CV-relaxed formulation achieves $99.7\%$ of the average sum-rate of the original PSLR-constrained problem, while reducing runtime by factors of $10.35$--$12.15$ under the considered scenarios.

0.10

Movable-Antenna-Empowered ISAC: 3D Ambiguity Function Analysis, Waveform Design and Antenna Position Optimization

eess.SP ·2026-09-28 ·Tianqi Mao, Yuanshuo Gang, Guangyao Liu, Shiqi Cui, Ying Sun +3 more
similarity 0.72
Abstract · 13 pages, 9 figures, submitted to IEEE for possible publication

Multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) provides abundant spatial and time-frequency degrees of freedom for integrated sensing and communication (ISAC), while movable-antennas (MAs) further introduce reconfigurable spatial freedom through array geometry adjustment. However, how the array geometry and the MIMO-OFDM waveform design jointly influence the sensing performance, i.e., the three dimensional (3D) ambiguity function property, remains insufficiently understood. Against this background, we investigate MA-empowered ISAC design under the MIMO-OFDM architecture, where the radio-frequency (RF) antenna positions and the baseband waveform are co-designed with symbol-level precoding (SLP) philosophy. The discrete periodic angle-range-Doppler ambiguity function is firstly derived for the MA-enabled ISAC framework, revealing its interesting features with respect to the waveform matrix rank. Specifically, it is proved that a rank-one waveform yields a 3D ambiguity function that is separable into angular and range-Doppler components. On the other hand, a higher-rank waveform combines multiple spatial components with angle-dependent weights, allowing the range-Doppler ambiguity function to vary across candidate angles and enabling the MA positions to further shape the 3D ambiguity function. Based on the aforementioned analysis, a 3D integrated sidelobe level ratio (ISLR) is defined, a joint optimization problem of the MA positions and the SLP waveform matrix is formulated, and a penalty dual decomposition based alternating optimization algorithm is developed. For the radar-only case, the existence of a rank-one globally optimal waveform is established, which reduces the original high-dimensional waveform optimization to a low-dimensional joint design of the spatial beam and MA positions.

0.41

Ambiguity Function Analysis of OFDM Signals With Pilots and Data Payloads

eess.SP ·2026-09-15 ·Jialin Wu, Fan Liu, Ying Zhang, Yifeng Xiong, Jie Yang +2 more
theory similarity 0.70
Abstract · 13 pages, 11 figures, submitted to IEEE for possible publication

Practical orthogonal frequency division multiplexing (OFDM) communication frames contain both deterministic pilots and random data payloads, motivating the joint ambiguity function (AF) analysis of the two components when the entire frame is reused for integrated sensing and communication (ISAC). This paper characterizes two discrete AF formulations for different Doppler regimes, namely the discrete periodic AF (DP-AF) and fast-slow-time AF (FST-AF), and derives closed-form expressions for their expected squared values. For the FST-AF, the expected sidelobe level (ESL) is uniform over the delay-Doppler plane and depends only on the pilot count, constellation kurtosis and total number of time-frequency resources, but not on the pilot symbols or pattern. For the DP-AF, we establish attainable lower and upper ESL bounds and show that no pilot design can minimize all sidelobes simultaneously. We further prove that attaining the lower bound at non-zero Doppler requires a periodic pilot pattern, while equally spaced chirp pilots, including Zadoff-Chu (ZC) sequences, maximize the numbers of sidelobes attaining the lower and upper bounds simultaneously. Two representative ZC pilot patterns widely encountered in communication frames are then examined: contiguous placement produces delay-Doppler ridges described by squared Dirichlet kernels, whereas equally spaced placement generates periodic peak-and-notch structures. Both regular patterns exhibit pronounced high sidelobes, suggesting that communication-oriented pilot patterns should be re-designed for delay-Doppler estimation in the context of ISAC. Numerical results validate the analysis and show that irregular pilot placement can suppress high sidelobes and improve target estimation performance.

0.21

Delay-Doppler Sensing Performance Analysis for MIMO-OFDM ISAC Systems

eess.SP ·2026-09-01 ·Peishi Li, Rang Liu, Qian Liu, Ming Li
published similarity 0.68
Abstract · Accepted by IEEE Globecom 2026

In communication-centric integrated sensing and communication (ISAC), delay-Doppler sensing reuses data-bearing orthogonal frequency division multiplexing (OFDM) signals rather than dedicated radar probing waveforms. Consequently, the resulting range-Doppler map (RDM) is shaped not only by target parameters, but also by communication-symbol randomness and, in multi-antenna transmissions, by spatial beamforming. While existing analyses have largely focused on single-antenna OFDM-ISAC, the delay-Doppler sensing behavior of multi-antenna OFDM-ISAC remains insufficiently understood. This paper analyzes a multi-input multi-output (MIMO)-OFDM-ISAC system in which multiple data streams jointly illuminate a sensing target. We derive second-order moment expressions for the RDM under matched filtering (MF) and reciprocal filtering (RF), and use them to characterize the dynamic range (DR). The analysis reveals two key multi-stream effects. First, under MF, the random superposition of multiple beamformed streams creates an additional RDM floor beyond the modulation-dependent and receiver-noise terms; therefore, constant-modulus signaling no longer eliminates the data-induced pedestal as in single-antenna OFDM-ISAC. Second, under RF, the matched-angle data-induced floor is removed, but the noise floor is amplified according to the reciprocal-power statistics of the beamformed target illumination. These results show that the user-target angular geometry directly governs the MF/RF tradeoff: MF is more robust under weak illumination, whereas RF can achieve a higher DR when reciprocal-noise amplification is mild. Numerical results validate the analysis and demonstrate the distinct geometry-dependent behaviors of MF and RF.

0.14

Full-Frame OFDM-ISAC: Joint Constellation, Pilot, and Receive-Filter Design

eess.SP ·2026-09-19 ·Dongil Yang, Kaitao Meng, Fan Liu, Christos Masouros, Kawon Han
similarity 0.66
Abstract · 13 pages, 9 figures

Orthogonal frequency-division multiplexing (OFDM) integrated sensing and communication (ISAC) reuses the entire time-frequency frame, including pilots and data payloads, for radar sensing. The random data payload, however, reduces the sensing dynamic range and degrades the target detection and parameter estimation performance. Existing studies typically optimize the modulation constellation, the pilot pattern, the power allocation, and the receive filter in isolation, overlooking their coupled effects on the sensing ambiguity structure. To address this gap, we propose a joint design of the constellation, the pilot placement and power split, and the mismatched receive filter for full-frame OFDM-ISAC systems, which minimizes the residual interference inside declared regions of interest (ROIs) under a communication rate constraint. For a given transmit signaling scheme, the receive filter admits a closed-form solution. With this filter in place, we derive closed-form expressions for the receiver-specific interference floor and noise enhancement over the 2-D range-Doppler domain, which show that the floor is governed by a single effective statistic of the full-frame signaling. This law reduces the joint design to two steps. A balanced staggered pilot placement removes the deterministic grating lobes of pilot-power boosting, and the shaped constellation and the power split are then selected jointly on the boundary of the rate constraint under the channel estimation error, which attains the joint optimum over the constructed shaping levels to first order in the declared ROI size. Under a quality-of-service (QoS) constraint of $98\%$ of the rate of a conventional 16-QAM frame, the proposed design significantly lowers the interference floor, improves the target detection probability, and achieves better ranging accuracy compared to the conventional receive filter-aware design.

0.17

Pilot-Based Sensing With OFDM and AFDM: A Resource-Matched Performance Comparison

eess.SP ·2026-10-16 ·Siyi Tang, Yin Xu, Aimin Tang, Dazhi He, Wenjun Zhang
similarity 0.65
Abstract

As a waveform candidate for next-generation wireless systems, affine frequency division multiplexing (AFDM) has often been compared with orthogonal frequency division multiplexing (OFDM) under different configurations, while a systematic comparison of their pilot-based sensing performance remains lacking. This paper establishes a comparison with the same bandwidth, frame duration, pilot energy, and reserved-resource overhead. OFDM-random, OFDM-fixed-comb, and OFDM-shifted-comb pilots are compared with AFDM pilots surrounded by guard resources using aperiodic ambiguity functions without cyclic prefix/chirp-periodic prefix (CP/CPP) and cyclic ambiguity functions with CP/CPP, followed by target detection experiments. The results show that OFDM-fixed-comb exhibits low range sidelobes but periodic range ambiguity peaks, while AFDM and OFDM-shifted-comb effectively suppress zero-Doppler range ambiguities. Within the common unambiguous region, all pilot configurations for both waveforms exhibit similar detection thresholds in strong-target detection, while structured OFDM and AFDM pilot placements outperform OFDM-random in weak-target detection. At high mobility, the AFDM receiver using the discrete affine Fourier transform (DAFT) can resolve integer Doppler beyond the conventional slow-time maximum unambiguous velocity, outperforming the tested conventional OFDM and AFDM receivers at the increased search complexity. These results separate the effects of waveform, pilot placement, and receiver processing, providing a basis for AFDM and OFDM pilot-based sensing design.

0.20

OFDM-ISAC over Data Payloads: MSE Analysis, Constellation Design, and Experimentation

eess.SP ·2026-08-16 ·Kawon Han, Kaitao Meng, Alexandra Chatzicharistou, Christos Masouros
similarity 0.65
Abstract · 13 pages, 12 figures

Orthogonal frequency division multiplexing (OFDM) is a key waveform for integrated sensing and communication (ISAC) systems due to its high spectral efficiency and inherent compatibility with modern wireless standards. However, its fundamental estimation-theoretic sensing performance under random data modulation remains largely unexplored. This paper presents a unified and explicit performance analysis of OFDM-based ISAC systems for multi-target range estimation, focusing on the distinct impacts of the modulation constellation on the sensing performance. We develop a comprehensive estimation-theoretic framework to characterize the range estimation mean-square error (MSE) for both matched filtering (MF) and reciprocal filtering (RF) sensing receiver architectures. Our theoretical analysis reveals that in multi-target and clutter-rich environments, the sensing performance of the MF receiver is fundamentally limited by the fourth-order moment (kurtosis) of the constellation, which determines the data-dependent sidelobe interference level. In contrast, the RF receiver eliminates such interference at the cost of noise enhancement, with its performance governed by the inverse second-order moment of the constellation. Building on these closed-form MSE derivations, we propose a sensing-receiver specific geometric constellation shaping (GCS) framework. By jointly optimizing the constellation geometry based on the minimum Euclidean distance (MED) and receiver-dependent sensing metrics, we enable a flexible trade-off between communication reliability and sensing precision. Our results demonstrate that the proposed constellation shaping provides significant performance gains and facilitates a tailored sensing and communication trade-off across different receiver architectures in practical over-the-air implementations.

0.46

Localization MSE Analysis for Cooperative OFDM-ISAC

cs.IT eess.SP ·2026-11-02 ·Kaitao Meng, Kawon Han, Christos Masouros
similarity 0.65
Abstract · 6 pages, 3 figures, submit to IEEE for possible publication

This paper develops a receiver-specific mean-squared-error (MSE) framework for cooperative integrated sensing and communication (ISAC) localization using random orthogonal frequency-division multiplexing (OFDM) payloads. It captures local peak perturbations and incorrect ambiguity-peak acquisition for two classical receiver processing schemes: matched filtering (MF) and reciprocal filtering (RF). For scatterers well separated in delay, we quantify how frequency spread and interference induced by symbol-energy fluctuations affect local delay errors under MF. RF removes symbol-dependent weighting but amplifies noise for low-energy symbols. Payload-conditioned joint Gaussian delay profiles yield peak-selection probabilities, which combine with nonlinear multistatic fusion errors to approximate position MSE while accounting for network geometry. Numerical results illustrate receiver-dependent estimation errors and the benefits of frequency-dependent constellation allocation.

0.08