CS Paper Radar

Movable-Antenna-Empowered ISAC: 3D Ambiguity Function Analysis, Waveform Design and Antenna Position Optimization

Tianqi Mao, Yuanshuo Gang, Guangyao Liu, Shiqi Cui, Ying Sun, Yifeng Xiong, Christos Masouros, Ana García Armada

eess.SP ·submitted 2026-09-28 09:33 UTC · v2

Abstract

Multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) provides abundant spatial and time-frequency degrees of freedom for integrated sensing and communication (ISAC), while movable-antennas (MAs) further introduce reconfigurable spatial freedom through array geometry adjustment. However, how the array geometry and the MIMO-OFDM waveform design jointly influence the sensing performance, i.e., the three dimensional (3D) ambiguity function property, remains insufficiently understood. Against this background, we investigate MA-empowered ISAC design under the MIMO-OFDM architecture, where the radio-frequency (RF) antenna positions and the baseband waveform are co-designed with symbol-level precoding (SLP) philosophy. The discrete periodic angle-range-Doppler ambiguity function is firstly derived for the MA-enabled ISAC framework, revealing its interesting features with respect to the waveform matrix rank. Specifically, it is proved that a rank-one waveform yields a 3D ambiguity function that is separable into angular and range-Doppler components. On the other hand, a higher-rank waveform combines multiple spatial components with angle-dependent weights, allowing the range-Doppler ambiguity function to vary across candidate angles and enabling the MA positions to further shape the 3D ambiguity function. Based on the aforementioned analysis, a 3D integrated sidelobe level ratio (ISLR) is defined, a joint optimization problem of the MA positions and the SLP waveform matrix is formulated, and a penalty dual decomposition based alternating optimization algorithm is developed. For the radar-only case, the existence of a rank-one globally optimal waveform is established, which reduces the original high-dimensional waveform optimization to a low-dimensional joint design of the spatial beam and MA positions.

Comment
13 pages, 9 figures, submitted to IEEE for possible publication

Closest papers

Nearest neighbours by meaning across the whole index.

Statistical Analysis of 3D Ambiguity Functions for Random MIMO-OFDM Signals

eess.SP ·2026-10-08 ·Pinjun Zeng, Yuyang Lu, Jialan Tang, Xiaoyang Chen, Yifeng Xiong +2 more
similarity 0.72
Abstract · 15 pages, 6 figures, 1 table

Random communication symbols allow integrated sensing and communications (ISAC) systems to exploit payload signals for sensing, but the resulting matched-filter response varies with the transmitted data. Existing statistical analyses of sensing with random orthogonal frequency division multiplexing (OFDM) waveforms have largely focused on delay and Doppler, while the spatial dimension introduced by multi-input multi-output (MIMO) arrays and precoding has received much less attention. This paper develops a three-dimensional ambiguity function (3D-AF) for random MIMO-OFDM waveforms over delay, Doppler, and angle domains. For point-target sensing, we express the 3D-AF as a quadratic form of the random communication symbols, with a deterministic matrix that captures the delay and Doppler shifts, the transmit and receive array responses, and the precoders on different subcarriers. Based on this representation, we derive a closed-form expression for the expected squared 3D-AF and show explicitly how the constellation fourth-order moment (or kurtosis) affects the ambiguity sidelobes. The same characterization yields expected integrated sidelobe level (EISL) and expected sidelobe level (ESL) metrics over mixed delay-Doppler-angle search domains. The framework is further extended to coherent multi-symbol processing with slow-time Doppler, leading to the corresponding fast-slow time (FST) approximation. These results provide a statistical characterization of the sensing ambiguity induced by random MIMO-OFDM communication signals in delay, Doppler, and angle.

0.26

Statistical Ambiguity-Function-Aware Joint Beamforming and Subcarrier Allocation for MIMO-OFDM ISAC under Random Symbols

eess.SP ·2026-10-15 ·Wonill Kim, Yumin Kim, Hyeonsu Lyu, Hyun Jong Yang
theory similarity 0.68
Abstract · 13 pages, 9 figures. Submitted to IEEE Transactions on Wireless Communications

Ambiguity function (AF) characterizes the delay--Doppler sidelobe structure that governs target resolution and masking in radar sensing. In ISAC, however, random communication symbols make the AF data-dependent, complicating its characterization and incorporation into transmit design. This raises a fundamental question: which AF characteristic can be effectively controlled through beamforming in a practical multiuser multitarget (MUMT) MIMO--OFDM system? To answer this, we statistically characterize the discrete-periodic AF (DP-AF) and derive an exact closed-form expected sidelobe level (ESL). We observe that nonzero-Doppler ESL cuts are delay-flat and the full two-dimensional integrated sidelobe level ratio (ISLR) is invariant to beamforming, whereas the zero-Doppler peak-to-sidelobe ratio (PSLR) remains controllable. We accordingly formulate an AF-aware joint beamforming and subcarrier-allocation problem with target-wise PSLR and illumination constraints. Since the direct PSLR constraint is intractable, we characterize its global optimum and prove that, for symbol kurtosis greater than one, the PSLR is maximized if and only if each target-wise directional-power profile is flat across subcarriers. We then introduce the coefficient of variation (CV) to measure deviation from this flatness and derive tight CV-dependent PSLR bounds. The lower bound yields a convex sufficient constraint for a desired PSLR, enabling an efficient reformulation. Simulations show $9.4$--$11.0$ dB worst-case PSLR gains over communication-only beamforming at the flat-spectrum point with a $2.4$--$5.9\%$ sum-rate loss. The CV-relaxed formulation achieves $99.7\%$ of the average sum-rate of the original PSLR-constrained problem, while reducing runtime by factors of $10.35$--$12.15$ under the considered scenarios.

0.10

Tensor Decomposition-Based Wireless Sensing for MIMO-OFDM ISAC via Flexible Spatial-Temporal-Spectral Optimization

eess.SP ·2026-08-16 ·Chengzhi Ye, Ruoyu Zhang, Lei Yao, Xinrong Guan, Yu Zhang +2 more
similarity 0.67
Abstract

Integrated sensing and communication (ISAC) is regarded as a key enabling technique in future 6th-generation (6G) mobile communication systems. However, existing multi-input multi-output (MIMO) orthogonal frequency division multiplexing (OFDM) ISAC designs generally rely on the fixed-position antennas and fixed allocation of time-frequency resources, thereby limiting the degrees of freedom of wireless sensing along the spatial-temporal-spectral dimensions. In this paper, we propose a novel wireless sensing framework for MIMO-OFDM ISAC systems with flexible spatial-temporal-spectral optimization and propose a tensor decomposition-based approach to estimate target parameters, including azimuth/elevation angles, ranges, and velocities. Specifically, we first establish a monostatic wireless sensing model for MIMO-OFDM ISAC systems, where the positions of antenna elements, the allocation of OFDM symbols and subcarriers can be flexibly configured. Then, we formulate the problem of estimating target parameters as a tensor decomposition problem admitting to the canonical polyadic format, which enables the parallel target parameters estimation process from corresponding factor matrices along the spatial, temporal, and spectral dimensions, respectively. Based on the decomposed factor matrices, we derive the Cramer-Rao Bound (CRB) for the unknown target parameters and reveal that the estimation accuracy of azimuth/elevation angles, velocities and ranges is fundamentally determined by the array geometry, the distribution of OFDM symbols and subcarriers. Building on this insight, we obtain an optimized solution for the positions of antenna elements, and optimal solutions for the subcarrier allocation and OFDM symbol allocation to minimize the CRB, as well as the mean square error of target parameters estimation.

0.41

Precision Coexistence: Angular-Spectral Region Constrained Waveform Design for MIMO-ISAC

cs.IT ·2026-10-21 ·Syed Ali Haider Shirazi, Taejoon Kim, David J. Love, Sergiy A. Vorobyov
published similarity 0.67
Abstract · Paper accepted for presentation at IEEE Conference on Integrated Sensing and Communications 2026

In this paper, we develop a dual-function waveform design framework for multiple-input multiple-output integrated sensing and communication (MIMO-ISAC) systems operating in congested electromagnetic environments. In such environments, the dual-function waveform must coexist with legacy systems, such as localized positioning sensors, maritime radar networks, and satellite communication links, that occupy specific frequency bands and angular sectors. To enable precision coexistence, we incorporate localized angular-spectral region constraints that suppress beamformed energy only within the angle-frequency regions occupied by each legacy system, while preserving the spatial degrees of freedom (DoFs) available outside those regions. The resulting waveform design problem is formulated as a nonconvex optimization problem and solved using a low-complexity majorization--minimization alternating direction method of multipliers (MM--ADMM) algorithm. Simulation results demonstrate that the proposed framework provides precise legacy-system protection while maintaining robust radar sensing and multi-user communication performance.

0.16

Delay-Doppler Sensing Performance Analysis for MIMO-OFDM ISAC Systems

eess.SP ·2026-09-01 ·Peishi Li, Rang Liu, Qian Liu, Ming Li
published similarity 0.65
Abstract · Accepted by IEEE Globecom 2026

In communication-centric integrated sensing and communication (ISAC), delay-Doppler sensing reuses data-bearing orthogonal frequency division multiplexing (OFDM) signals rather than dedicated radar probing waveforms. Consequently, the resulting range-Doppler map (RDM) is shaped not only by target parameters, but also by communication-symbol randomness and, in multi-antenna transmissions, by spatial beamforming. While existing analyses have largely focused on single-antenna OFDM-ISAC, the delay-Doppler sensing behavior of multi-antenna OFDM-ISAC remains insufficiently understood. This paper analyzes a multi-input multi-output (MIMO)-OFDM-ISAC system in which multiple data streams jointly illuminate a sensing target. We derive second-order moment expressions for the RDM under matched filtering (MF) and reciprocal filtering (RF), and use them to characterize the dynamic range (DR). The analysis reveals two key multi-stream effects. First, under MF, the random superposition of multiple beamformed streams creates an additional RDM floor beyond the modulation-dependent and receiver-noise terms; therefore, constant-modulus signaling no longer eliminates the data-induced pedestal as in single-antenna OFDM-ISAC. Second, under RF, the matched-angle data-induced floor is removed, but the noise floor is amplified according to the reciprocal-power statistics of the beamformed target illumination. These results show that the user-target angular geometry directly governs the MF/RF tradeoff: MF is more robust under weak illumination, whereas RF can achieve a higher DR when reciprocal-noise amplification is mild. Numerical results validate the analysis and demonstrate the distinct geometry-dependent behaviors of MF and RF.

0.14

Robust Beamforming and Antenna Position Optimization for MA-Assisted ISAC with Imperfectly Positioned MAs

eess.SP ·2026-09-20 ·Zeyuan Zhang, Ning Wei, Ahmad Bazzi, Boyang Jia, Huimin Tang +2 more
similarity 0.65
Abstract

This paper investigates robust beamforming and antenna position design for movable antenna (MA)-enabled integrated sensing and communication (ISAC) systems under antenna position errors. In particular, deviations between the actual and nominal antenna positions in practical MA arrays are inevitable due to limited mechanical accuracy. Therefore, the conventional ISAC design based on nominal positions may suffer from substantial performance degradation. To address this issue, we consider a monostatic downlink MA-ISAC system in which each transmission frame consists of a low-power pilot and an ISAC payload. The target angle, reflection coefficient, and antenna position-error vector are jointly estimated based on these two observations, thereby enabling sensing with imperfectly known antenna positions. We derive the resulting angle Cramer-Rao bound (CRB) and formulate a problem that minimizes its worst-case value subject to each user's signal-to-interference-plus-noise ratio (SINR) requirement under all possible position errors. By exploiting a common phase-response decomposition, we obtain tractable reformulations and develop an alternating optimization (AO) algorithm for the beamforming vectors and nominal antenna positions. Numerical results demonstrate that, compared with conventional nominal-position designs, the proposed robust scheme achieves improved communication reliability while maintaining competitive sensing accuracy under practical antenna position uncertainty.

0.13

A Tutorial on Movable Antenna-Enabled ISAC Systems: Fundamentals, Parameter Estimation, and Security Issues

eess.SP ·2026-09-22 ·Zhendong Li, Zhou Su, Jianle Ba, Linchu Chen, Yan Yang +12 more
survey similarity 0.63
Abstract

Movable antenna (MA) technology has recently emerged as a promising paradigm for enhancing the flexibility and performance of wireless systems by allowing antennas to dynamically adjust their spatial positions within a confined region. Meanwhile, integrated sensing and communication (ISAC) has attracted significant attention as a key technology for next-generation wireless networks, aiming to integrate communication and sensing within a shared hardware and spectral framework. By leveraging the additional spatial degrees of freedom offered by MA, MA-enabled ISAC systems provide new opportunities to enhance both communication performance and sensing accuracy. However, the integration of MA into ISAC also poses new challenges in parameter estimation and security. In this tutorial, we provide a comprehensive overview of MA-enabled ISAC systems, with a particular focus on their fundamentals, parameter estimation, and security issues. First, we introduce the basic principles of MA and ISAC, and review representative MA-enabled ISAC systems and their potential applications. Then, we establish unified mathematical models for communication and sensing, and systematically review representative channel and sensing parameter estimation methods tailored to MA-enabled ISAC systems. Numerical comparisons are provided to illustrate the characteristics and performance of different estimation methods. Furthermore, we investigate the security issues of MA-enabled ISAC systems, introduce the fundamentals of physical-layer security (PLS), and summarize how the spatial reconfigurability of MAs can be exploited to enhance the security of ISAC systems. Representative case studies are presented to demonstrate the performance gains of MA-enabled secure ISAC systems. Finally, we identify several open issues and future research directions toward practical MA-enabled ISAC systems.

0.21

Full-Frame OFDM-ISAC: Joint Constellation, Pilot, and Receive-Filter Design

eess.SP ·2026-09-19 ·Dongil Yang, Kaitao Meng, Fan Liu, Christos Masouros, Kawon Han
similarity 0.62
Abstract · 13 pages, 9 figures

Orthogonal frequency-division multiplexing (OFDM) integrated sensing and communication (ISAC) reuses the entire time-frequency frame, including pilots and data payloads, for radar sensing. The random data payload, however, reduces the sensing dynamic range and degrades the target detection and parameter estimation performance. Existing studies typically optimize the modulation constellation, the pilot pattern, the power allocation, and the receive filter in isolation, overlooking their coupled effects on the sensing ambiguity structure. To address this gap, we propose a joint design of the constellation, the pilot placement and power split, and the mismatched receive filter for full-frame OFDM-ISAC systems, which minimizes the residual interference inside declared regions of interest (ROIs) under a communication rate constraint. For a given transmit signaling scheme, the receive filter admits a closed-form solution. With this filter in place, we derive closed-form expressions for the receiver-specific interference floor and noise enhancement over the 2-D range-Doppler domain, which show that the floor is governed by a single effective statistic of the full-frame signaling. This law reduces the joint design to two steps. A balanced staggered pilot placement removes the deterministic grating lobes of pilot-power boosting, and the shaped constellation and the power split are then selected jointly on the boundary of the rate constraint under the channel estimation error, which attains the joint optimum over the constructed shaping levels to first order in the declared ROI size. Under a quality-of-service (QoS) constraint of $98\%$ of the rate of a conventional 16-QAM frame, the proposed design significantly lowers the interference floor, improves the target detection probability, and achieves better ranging accuracy compared to the conventional receive filter-aware design.

0.17