CS Paper Radar

Deploying RDMA for Distributed Inference and Training At Scale

Yibo Huang, Yi Cui, Yukai Huang, Huaping Zhou, Jiancong Tong, Zhaoyu Wu, Gen Miao, Haoran Wei, Boyan Ding, Zhuo Jiang, Jianxi Ye, Yibo Zhu, Chuanxiong Guo, Yang Xu, Jie Wu

cs.LG cs.DCcs.NIeess.SY ·submitted 2026-10-08 23:57 UTC · v2

Abstract

RDMA can reduce communication overhead in distributed machine learning systems, but realizing these benefits in production requires more than replacing TCP. Variable-size messages, concurrent connections, bursty incasts, and service failures introduce challenges that hardware offload alone cannot address. This paper reports our experience deploying ByteExpress, a software communication layer over hardware RDMA, in ByteDance's parameter-server-based inference and training systems. We present three lessons from the deployment: efficient RDMA requires buffer management across application and transport layers; scalable communication requires coordinated management of connections, receive capacity, and outstanding data; and service availability requires recovery above the transport layer. ByteExpress combines an RDMA-aware allocator, zero-copy transfers, QP multiplexing, receive-credit flow control, a software send window, and RPC-assisted recovery. In production inference, ByteExpress reduces mean and P99 model parameter fetch latency by 35.7% and 43.7%, respectively, and total CPU usage by 10.69% compared with kernel TCP. In training, ByteExpress reduces P99 model parameter push latency by up to 74.0% compared with TCP, with no PFC pauses observed at runtime.

Comment
14 pages, 16 figures

Closest papers

Nearest neighbours by meaning across the whole index.

PCM: Programmable Congestion Management for Terabit RDMA NICs

cs.NI ·2026-10-09 ·Mikhail Khalilov, Timo Schneider, Tommaso Bonato, Siyuan Shen, Marcin Chrapek +8 more
similarity 0.66
Abstract

Datacenter congestion control (CC) and load balancing (LB) evolve rapidly as workload demands change, but deployment depends on RDMA hardware and transport interfaces. Emerging programmable RDMA engines tie policy code to vendor APIs. Operators must therefore port each policy for every platform they deploy. We address this with PCM, a programming model that separates portable congestion management from platform integration on datacenter NICs. Developers write event-driven handlers that they can debug in simulation and reuse on real hardware. PCM exposes flow telemetry as signals and uses triggers to support per-event reactions and coarser responses to accumulated feedback. Vendors provide optimized backends that map signals and output controls to native NIC mechanisms with defined feedback and control semantics. We demonstrate PCM's expressivity by implementing eleven well-known datacenter CC and LB algorithms. We deploy PCM across four distinct datapaths: an Ultra Ethernet simulator, CPU-based UCCL, and on-NIC offloads on NVIDIA ConnectX-8 and Microsoft 1P. On CX-8, PCM-Swift achieves processing capacity equivalent to one reaction per three 4 KiB packets at 800 Gbit/s, using one-fifth of the NIC's hardware threads. In UCCL, it matches native Swift's 1.56 Tbit/s goodput with 64 KiB chunk-level control. PCM's design informed ongoing Ultra Ethernet work toward a portable congestion management interface.

0.30

SURMA: Efficient Fine-Grained Communication Offload for SuperPOD

cs.AR ·2026-11-16 ·Haoran Shang, Weifeng Zhang, Mengzhu Li, Huizheng Wang, Sihan Guan +12 more
similarity 0.64
Abstract

GPU SuperPODs underpin large language model (LLM) serving, but growing bandwidth and round-trip times make inter-GPU communication consume increasing compute resources. SM-driven remote memory access occupies shared memory or registers for in-flight data and competes for SM-to-NoC bandwidth. Dedicated engines can free these resources, but must handle fine-grained transfers, down to a 576\,B KV-cache entry. NVIDIA's CopyEngine uses less than 1\% of NVLink bandwidth at 7\,KB granularity. We present SURMA, an on-die Scale-Up Remote Memory Access engine. Adapting RDMA requires overcoming slow doorbell submission, excessive per-application connection state, head-of-line blocking of completion notifications on shared connections, and costly ordering for multipath transfers. SURMA uses a credit-based shared send queue to reduce submission latency from 1.2\,$μ$s to 400\,ns; fused write-with-atomic semantics to share connections while independently notifying each transaction; and Network Per Path Ordering to ensure data arrives before the completion flag without Sender or Receiver Ordering. We implement SURMA in RTL on a two-FPGA prototype and evaluate it with two 8-GPU NVLink servers. At 512\,B granularity, SURMA saturates attainable bandwidth with a single SM, whereas NVLink needs over 14\% of the SMs. SURMA occupies under 0.5\% of GPU area and accelerates inference on four models by 1.05--1.26$\times$ over NVLink.

0.08

mKernel: Fast Multi-GPU, Multi-Node Fused Kernels

cs.DC cs.AIcs.LGcs.NI ·2026-09-11 ·Ziming Mao, Yihan Zhang, Shawn Wei Chew, Shuang Ma, Costin Raiciu +3 more
highly cited similarity 0.63
Abstract

Communication has become a bottleneck in distributed training and inference of large models. Overlapping communication with computation at the granularity of kernels, on separate streams, reduces only part of this communication cost. Fused kernels often have better performance by transmitting each output tile as soon as it is produced, but existing fused kernels are largely confined to a single NVLink domain. We present mKernel, a library of multi-GPU, multi-node fused kernels that overlap computation, intra-node NVLink communication, and inter-node RDMA at tile granularity. mKernel partitions the streaming multiprocessors (SMs) of a persistent kernel into compute and communication roles, and an on-GPU controller tunes the SM partition adaptively at run time, since the best SM partition varies with the kernel and the input shape. It structures data movement hierarchically so that data traversing the inter-node network is minimized. Finally, it drives the network from the GPU through a lightweight command queue and host proxy implemented directly on RDMA verbs, which allows the same kernels to run on any network backend (e.g. InfiniBand and on AWS EFA); we observe, surprisingly, that GPUDirect Async (IBGDA) yields little additional benefit over host-assisted GPU-initiated communication. We implement five kernels spanning tensor, sequence, and expert parallelism. On two 16-GPU H200 clusters, mKernel achieves speedups of up to 1.72x on GEMM+AllReduce and $1.88\times$ on Ring Attention.

0.48

Towards Training Private LLMs: Exploring Fine-Tuning Language Models on Apple Silicon with RDMA over Thunderbolt

cs.DC ·2026-09-16 ·En-Ming Huang, Yao-Ting Hsieh, Hsiang-Yu Tsou, Mu-Chi Chen, Shih-Hao Hung +1 more
published similarity 0.63
Abstract · 8 pages, 13 figures, accepted by ACM RACS'26

Private large language model (LLM) fine-tuning is increasingly important for organizations that need to adapt models using sensitive data, but it often exceeds the memory capacity of commodity datacenter accelerators. Apple Silicon offers a different design point through large unified memory and lower complete-system cost, while recent Apple software support enables distributed execution over RDMA-over-Thunderbolt (TB). This paper studies whether Apple Silicon can serve as a practical platform for private LLM fine-tuning. We characterize RDMA-over-TB communication on Mac Studio nodes, showing that the measured bandwidth is far below nominal TB specifications. Next, we extend Apple's implementation with multi-trunk communication, persistent worker threads, and CPU-side gradient overlap to better exploit multiple direct TB links for LLM fine-tuning workloads. Finally, on a four-node Mac Studio cluster that fine-tunes a Qwen3-9B, our optimizations improve weak-scaling throughput by up to 1.6X over the single-trunk, non-overlapped baseline and reach 936 tokens/s for sequence length 17408. We further compare Apple Silicon with an NVIDIA H100 platform to quantify the trade-off between memory capacity, throughput, and acquisition cost, showing that Apple Silicon can provide a cost-effective solution for private LLM fine-tuning.

0.32

Completion-Path Credits: Multi-Resource Control for Scale-Up Fabrics

cs.NI ·2026-08-18 ·Fan Yang, Jiaqi Liu, Tao Jiang, Zhan Wang
similarity 0.63
Abstract · 10 pages, 5 figures

Scale-up fabrics connecting GPUs and AI accelerators carry tensor transfers together with remote reads, writes, atomics, and notifications over shared target-side receiver resources. Byte-denominated credits protect link buffers and streaming HBM traffic, but poorly represent small operations dominated by Atomic execution or response injection. This paper presents SemaCredit, a receiver controller that admits each remote-memory operation against a vector of target-resource demands and returns each component when its corresponding HBM, Atomic, or response stage completes. In a deterministic event simulator with multipath queues, eight HBM partitions, a serialized Atomic engine, and a response engine, SemaCredit matches a strong per-resource byte baseline on HBM-hotspot traffic while reducing small-operation P99 latency by 52.4% under Atomic contention and 10.2% under response incast. Application-shaped mixes show 57.7% and 14.5% P99 latency improvements for AllReduce-shaped and remote-read-shaped traffic while matching byte credits on HBM-dominated MoE traffic.

0.12

CMM-MP: A Novel Memory Pooling Architecture using Purpose-built Memory Device with CXL and Ethernet

cs.AR ·2026-10-15 ·Michael Wasef, Gongjin Sun, Edmund Au, Ranjitha Gopalakrishna, Elham Movahedian +13 more
similarity 0.62
Abstract · 12 pages. Submitted to IEEE Transactions on Computers. CMM-MP is also evaluated in "LLM KV Cache Storage using CXL Memory," IEEE Computer Ar…

CXL Memory Module - Memory Pooling (CMM-MP) introduces a novel memory pooling architecture to meet the unique requirements of emerging memory-intensive workloads. This industry-first, purpose-built memory-pooling device combines the benefits of Compute Express Link (CXL) with the scalability and cost advantages of Ethernet. Multiple CMM-MP devices together provide a flexible, composable, and disaggregated memory expansion solution. The CMM-MP enables 100s of TB capacity for GPU/CPU applications without modifications. The memory pool is exposed as a large-capacity logical aggregate memory, with all pool discovery, composition, and backend network datapath tasks fully offloaded to the device. CMM-MP supports both memory pooling and sharing usage modes. It provides an application latency of 2.7 us and up to 23 GB/s of memory throughput. Our evaluations demonstrate that CMM-MP significantly outperforms RDMA-based solutions in latency and throughput. We also evaluated real-world use cases of Valkey+YCSB and DiskANN using CMM-MP.

0.39

Beyond UDP: RDMA as the Missing Link for Gigasample Software-Defined Radio

eess.SP ·2026-09-04 ·Carsten Andrich, Sebastian Giehl, Michael Schubert
similarity 0.61
Abstract

Software-defined radio (SDR) front ends have gained an order of magnitude in sample rate within a single product generation, while the transport that carries their output has not changed: samples are packed into Ethernet datagrams and reassembled by the host processor. At gigasample rates this fails on two counts at once, exhausting the time the host has per packet and the memory bandwidth it has for copying, and no amount of tuning or kernel bypass recovers both. The burden has instead been passed to the user, who must supply operating system expertise that has nothing to do with radio. We show that remote direct memory access removes the problem rather than relocating it. The SDR places received samples directly into memory the host has registered, and fetches samples for transmission from that memory when its converters require them. The processor leaves the data path in both directions, each sample byte crosses the memory bus once, and the transmit path loses the hard real-time pacing problem that has always accompanied it. What remains for the user application is the signal processing itself, which should be all an SDR requires, even at gigasample rates.

0.23

SigmaTrace: Library-Agnostic Observability for CPU/GPU-Initiated RDMA Communication

cs.DC ·2026-10-16 ·Javid Baydamirli, Didem Unat
publishedcode/data similarity 0.61
Abstract · Accepted at SC26. Author's accepted manuscript. 13 pages, 10 figures, 1 table. Code: https://github.com/ParCoreLab/SigmaTrace

RDMA networking enables low-latency, high-bandwidth communication on large systems. Despite its adoption, however, observability is lacking. Existing tools target specific communication libraries or only report aggregated data, missing per-operation behavior. The gap is widest for GPU-initiated networking, whose in-kernel RDMA operations are invisible to the host. We present SigmaTrace, a library-agnostic RDMA profiling framework providing fine-grained, per-operation visibility for CPU and GPU-initiated networking. It traces operations at the libibverbs/mlx5dv layers, the common denominator beneath communication libraries on InfiniBand and RoCE, and employs a low-overhead memory interposition technique that, to our knowledge, gives the first observability into GPU-initiated RDMA without source patching or binary instrumentation. Host-side tracing adds 1.3% overhead on NCCL AllReduce at 128 GPUs and under 2% on RCCL at 1024 GPUs. On a persistent-kernel BFS and Mixture-of-Experts inference, SigmaTrace exposes an in-kernel barrier spread and 2.13x inter-node traffic skew invisible to existing profilers.

0.52