CS Paper Radar

Hierarchical Graph Neural Network for Probabilistic Power Flow with Grid Topology Contingencies

Jinbao Wang, Jun Liu, Shiliang Zhang, Xuehui Ma, Lin Yan, Haolin Liu, Sabita Maharjan

eess.SY cs.GR ·submitted 2026-10-09 12:27 UTC · v1
published

Abstract

Data-driven surrogates reduce the nonlinear solves required for probabilistic power flow (PPF), but models tied to a fixed bus--branch graph often generalize poorly when outages change electrical coupling. This paper proposes a topology-decomposition-driven hierarchical bidirectional graph neural network (TDD--HBGNN) for PPF under unseen topologies. For each realized topology, the network is decomposed into fundamental topological units (FTUs), dynamically homogeneous voltage clusters (DHVCs), and a core backbone sub-grid (CBSG), with equivalent-admittance representations preserving electrical ports between units. A sensitivity-based linear prior captures the first-order voltage-magnitude and phase-angle response, while the HBGNN learns topology-dependent nonlinear residuals. Impedance- and uncertainty-aware bottom-up aggregation condenses local perturbations, while mode-modulated top-down broadcasting restores system context at buses. We evaluate our approach on the IEEE 118-bus and Polish 2746-bus systems under unseen N--1 and N--2 contingencies against six baseline methods. Compared with these methods, TDD--HBGNN achieves 2.47--4.20-fold lower all-bus phase-angle errors and lower phase-angle errors in every held-out event. Its voltage-magnitude advantage is concentrated near the outaged branches, where paired error ratios reach 1.75--2.58 on the IEEE system and 1.87--1.97 in Polish N--2 events. All system--contingency--baseline comparisons favor TDD--HBGNN in joint voltage--angle error. Moreover, shared hierarchical operators keep the model size at 0.658 million parameters across both grids and yield 0.161--1.793~ms forward latency per probabilistic case. These results demonstrate system-wide angular accuracy, outage-local voltage accuracy, and parameter-efficient scaling across unseen topologies.

Journal ref
IEEE Transactions on Industrial Informatics, 2026
DOI
10.1109/TII.2026.3734758

Closest papers

Nearest neighbours by meaning across the whole index.

Distribution Grid Reconfiguration and Restoration via Linearizable Multi-phase Power Flow Modeling

eess.SY ·2026-10-26 ·Young-ho Cho, Hao Zhu
similarity 0.66
Abstract

Accurate and tractable power-flow (PF) modeling is essential for distribution grid topology optimization, where the presence of discrete branch-status decisions therein significantly increase the computational complexity. To tackle this challenge, we develop a topology-adaptive, low-complexity neural piecewise-linear (N-PWL) PF model. We propose a sequential layer design that can directly incorporate branch status variables into the PF mapping from branch flows to nodal injections. As a result, our N-PWL model not only preserves the PF branch-node consistency but also facilitates the representation of any unseen topologies without retraining. A low-complexity model design is further pursued to attain a linear NN parameter scaling by using a fixed-size area partition of the feeder. The resulting scalable N-PWL model enables mixed-integer linear programming (MILP) formulations of feeder topology optimization tasks, including distribution network reconfiguration (DNR) and restoration ordering problems (ROP). Numerical studies on the unbalanced, multi-phase IEEE 123-bus feeder demonstrate our N-PWL model outperforms existing end-to-end baselines in PF prediction and, more importantly, can fill the gap by achieving accurate representation of any unseen topologies. For solving DNR/ROP, our model can significantly improve the AC feasibility over linearized PF models, with a notable reduction of computation time compared with AC-PF based nonlinear formulations, particularly under a large number of topology decisions.

0.20

Unified Heterogeneous Graph Neural Network solver for Power Flow, Optimal Power Flow and State Estimation

eess.SY cs.LG ·2026-09-15 ·Ferran Bohigas-Daranas, Hamid Latif-Martínez, Eduardo Prieto-Araujo, Oriol Gomis-Bellmunt, Pere Barlet-Ros
similarity 0.66
Abstract

Power Flow (PF), Optimal Power Flow (OPF), and State Estimation (SE) are fundamental problems in power system analysis, but solving them is computationally expensive. Graph Neural Networks (GNNs) have been proposed as fast surrogates, yet existing solvers are trained for a single problem at a time, producing narrow models that must be rebuilt for each new task. We propose a more general approach: a single Heterogeneous Residual Gated Graph Convolutional Network that solves all three problems with one shared backbone. Rather than learning one mapping, the model learns a reusable representation of how the network behaves, from which PF, OPF, and SE can each be estimated. Trained jointly on the three problems across diverse topologies and loading conditions, and evaluated on the IEEE 14-bus and 118-bus systems, the shared model matches the accuracy of task-specific GNN solvers and stays robust on unseen loading levels and topologies. These results show that a single model can capture the basic operation of a power network and serve several analysis tasks at once, a first step toward a foundation model for power systems.

0.11

Benchmarking Graph Neural Networks for AC Power Flow: The Role of Inductive Biases and Physical Constraints

cs.LG cs.AI ·2026-10-28 ·Federico Clerici, Ferran Bohigas-Daranas, Hamid Latif-Martínez, Eduardo Prieto-Araujo, Oriol Gomis-Bellmunt +1 more
benchmark similarity 0.65
Abstract

Fast and accurate models for AC power flow (ACPF) are increasingly important as modern electrical grids require more frequent system analyses. Graph neural networks (GNNs) naturally exploit electrical grid topology, yet the effects of architectural design choices on predictive performance remain poorly understood given differences in graph representations and evaluation settings across studies. We present a unified benchmark of representative GNN architectures for ACPF prediction under a common experimental framework. All models use identical preprocessing and training procedures and comparable parameter budgets, isolating the impact of message-passing mechanisms and inductive biases. We also analyze errors by distance from the slack bus and systematically ablate key design components. We evaluate predictive accuracy and physical consistency on the IEEE 14-bus and IEEE 118-bus systems. Results indicate that anisotropic message-passing architectures offer the most favorable trade-off between predictive accuracy and physical consistency under the studied parameter and topology constraints. Explicit edge features encoding line impedances and global context aggregation are particularly important for representing electrical interactions and system-wide dependencies, especially for voltage-angle predictions on the topologically bottlenecked IEEE-118 grid. Under a budget with approximately fixed parameters, two or three message-passing layers generally provide the best balance between depth and representation width, while additional depth offers no consistent improvement. Ablations also show that standard residual and root connections are not necessarily beneficial in shallow models, and that aggregation operators involve trade-offs between statistical accuracy and physical consistency. These results provide practical guidelines for designing graph-based power system models.

0.17

Graph Machine Learning: An Opportunity for Power Systems

cs.LG cs.AIcs.CEeess.SY ·2026-08-17 ·Martin Sadric, Sebastian Pütz, Christian Nauck, Veit Hagenmeyer, Frank Hellmann +2 more
surveybenchmark similarity 0.63
Abstract

Modern power systems face growing operational complexity driven by the integration of renewable energy sources, decentralization, and the need for real-time decision-making across a wide range of timescales. Addressing these challenges traditionally relies on model-based methods that, while accurate, can be too slow for operational demands. Machine learning (ML) has therefore emerged as a faster, data-driven alternative. As grid topology plays a central role in power system operation, graph machine learning (GML) methods offer a natural framework for incorporating topological dependencies as an inductive bias. We survey nearly 800 papers at the intersection of GML and power systems, covering forecasting, state estimation, optimization, control, fault diagnosis, and cybersecurity. Power systems constitute an unusually rich benchmark setting for GML, as they combine hard physical constraints, multi-scale dynamics, safety-critical requirements, and scarce labeled data within a single, well-defined domain. Conversely, power systems can benefit from utilizing GML to complement classical solvers, as GML provide scalable, topology-aware approximations with promising generalization and computational efficiency. We identify open challenges, including limited real-world deployment and the need for interpretable models in safety-critical settings. Despite the rapidly growing number of publications, standardized benchmarks and open datasets remain scarce, leaving many results difficult to reproduce and undermining the long-term scientific credibility of the field. We further derive a structured requirements catalog for ML-ready power grid benchmarks, intended to guide future dataset development and improve reproducibility across studies. We call on the community to prioritize dedicated benchmark studies and the release of open datasets and models.

0.23

Adaptive State Estimation Under Topological Uncertainty in Unobservable Primary Distribution Systems Using Strategically Placed Sensors

eess.SY ·2026-09-23 ·Farah Elsherif, Behrouz Azimian, Anamitra Pal
published similarity 0.63
Abstract · 6 pages, 6 figures, 4 tables. Accepted for presentation at the 2026 North American Power Symposium (NAPS)

The rapid integration of distributed energy resources is fundamentally altering power flow patterns in primary distribution networks and intensifying operational uncertainty. These problems are further compounded by lack of real-time situational awareness and frequent topology changes. To address these problems, this paper proposes an integrated deep learning framework for simultaneous topology identification (TI) and distribution system state estimation (DSSE) in real-time unobservable primary distribution networks instrumented by a minimal set of synchronized measurement devices (SMDs). A correlation-driven SMD placement algorithm is introduced first that jointly satisfies TI accuracy and DSSE performance requirements by exploiting temporal and spatial correlations in nodal voltage measurements. A dual deep neural network (DNN)-based DSSE model is developed next to estimate three-phase voltage magnitudes and angles across diverse operating conditions. To extend the framework beyond the base topology, fine-tuning-based transfer learning is employed to adapt the DSSE model to reconfigured topologies using limited retraining data. The framework is validated under both Gaussian and non-Gaussian measurement noise and benchmarked against a conventional estimation approach and a single DNN model.

0.35

Reachability-Based Formal Verification of Graph Neural Networks with Node and Edge Features

cs.LG cs.AI ·2026-09-24 ·Anne M. Tumlin, Ben Wooding, Zhenxuan Shao, Diego Manzanas Lopez, Tyler Derr +1 more
published similarity 0.62
Abstract

Graph neural networks (GNNs) have become a prominent approach for developing fast, topology-aware surrogates in electric power systems, supporting tasks such as power flow (PF) analysis, optimal power flow (OPF) estimation, and cascading failure analysis (CFA). Despite this growing use, formally verifying GNN-based models remains challenging, with existing methods limited in scope. We extend the neural network verification (NNV) framework to graph-structured inputs through GraphStar sets, a generalization of Star sets that captures uncertainty over both node and edge features. This extension enables the propagation of linear message-passing operations and the sound approximation of ReLU nonlinearities for GNN architectures, including graph convolutional network (GCN) and graph isomorphism network with edge features (GINE) layers. We evaluate GNNV across three power system tasks, PF, OPF, and CFA, on the IEEE-24, IEEE-39, and IEEE-118 test cases, as well as two standard graph classification benchmarks, ENZYMES and PROTEINS. Our results show that GNNV provides tighter robustness guarantees than CORA on graph classification models with ReLU-based activations and, for the first time, delivers edge-aware robustness guarantees for GINE-based PF and OPF models under joint node and edge perturbations.

0.59

Droop-Aware Foundation Model Power Flow

cs.ET ·2026-09-20 ·Khezr Sanjani, Peng Zhang
similarity 0.61
Abstract

This paper develops a droop-aware extension of the GridFM power systems foundation model, embedding droop gains and frequency/voltage deadband parameters as per-bus node features to enable control-aware AC power-flow analysis. Existing power-flow datasets encode only static electrical features, conflating operating points from qualitatively different control regimes; this work resolves that gap by exposing droop and deadband parameters as structured node features, with deadband discontinuities handled through a smooth tanh approximation that preserves solver differentiability. A transformer-based graph neural network is pre-trained on masked reconstruction and fine-tuned on the resulting control-aware datasets. The framework is validated against PSCAD electromagnetic-transient simulations on a two-bus system (0.11% maximum steady-state error) and cross-validated against an independent PyPower droop solver on the IEEE 24-bus RTS. On the 24-bus system the surrogate attains R2 = 0.9996 for active generation and 0.0015 p.u. voltage-magnitude RMSE; scalability is confirmed on the IEEE 300-bus system (0.0036 p.u. RMSE, R2 = 0.9841 for voltage magnitude across 299,700 predictions). A three-mode control study further shows that the deadband widens the control-error distribution while leaving total droop compensation unchanged, establishing deadband width as an actionable node-level design feature.

0.29

Beyond Accuracy: Physics-Informed Evaluation of ANN-based Power Flow Solvers under System Shift

eess.SY ·2026-11-10 ·Dong Liu, Jochen Stiasny, Jochen Cremer, Pedro P. Vergara
similarity 0.61
Abstract

Recent advances in artificial deep learning-based power flow (PF) solvers have primarily focused on improving estimation accuracy, while their physical feasibility and operational reliability under realistic system variations remain insufficiently evaluated. This paper proposes a physics-informed evaluation framework for deep learning-based PF solvers under topology and load distribution shifts. Beyond conventional voltage-domain errors, the framework incorporates KCL gaps, branch-flow gaps, KVL residuals, continuous feasibility scores, and strict, practical, and relaxed PF feasibility rates. Four case studies are designed to investigate topology shifts, mixed topology training, load distribution shifts, and combined topology distribution shifts. Eight ANN architectures, including graph input models, load-only baselines, and physics-informed neural networks, are evaluated under consistent settings. The results demonstrate that low estimation errors do not necessarily correspond to physically feasible or operationally reliable PF solutions, particularly under combined system shifts. The proposed framework establishes an initial foundation and analysis for the development and verification of trustworthy deep learning-based PF solvers, providing support for their reliable deployment in future AI-enabled power system analysis.

0.13