CS Paper Radar

A Physics-Informed Hybrid Forward-Inverse Machine Learning Framework for High-Dimensional Sparse Recipe Reconstruction

Md. Muqtadir Fuad, Md. Istiak Adnan, Ridwan Al Aziz

cs.LG ·submitted 2026-10-08 19:25 UTC · v1
unusual

Abstract

High-dimensional sparse recipe formulation in process industries involves nonlinear association of various covariates, bounded by sparsity constraints and multi-criteria tolerances. Traditional physics-based classical methods (such as Kubelka-Munk) fail to generate sparse candidate recipes properly due to their simplified assumptions and industrial process variations. This study proposes a hybrid physics-informed uncertainty-aware framework that is structured into three modules: (a) Module A, a multi-target forward quality model; (b) Module B, a sparse inverse reconstructor; and (c) Module C, a feasibility-constrained ranking layer. Then it has been validated in an industrial textile dyeing context with recipe-grouped cross-validation under multi-illuminant quality assessment comprising process and production information, target reflectance, K/S values, and spectral descriptors. Histogram Gradient Boosting (HGB) with spectral-only features ($R_λ$, K/S) and Gradient Boosting Regressor (GBDT) with recipe-process features outperforms other configurations with out-of-Fold MAE of 0.1655 and 0.1523 in the forward quality model. For inverse reconstruction, a component-wise median blend achieved a recipe-vector MAE of 0.0295. Exploratory conditional treatment effect (CATE) suggests an observational association that alkali adjustment reduces error for red and pale shades (CATE = -0.196). This framework provides a human-in-the-loop decision-support tool that minimizes costly laboratory trials across industrial formulation domains.

Closest papers

Nearest neighbours by meaning across the whole index.

Forward and Inverse Virtual Metrology for Phototransistor Gain: A Hierarchical, Uncertainty-Aware Approach for Small Production Datasets

cs.LG cs.CEeess.SY ·2026-08-12 ·Mahshid Amirabgir, Lorenza Ferrario, Paolo Conci, Mahdieh Amirabgir, Giancarlo Orengo
code/data similarity 0.54
Abstract · 43 pages, 15 figures

The customization, optimization and stabilization of the process flow of a silicon bipolar phototransistor commits months of cleanroom time before a finished device can be measured, so a model that predicts device gain from process parameters before a run has value out of proportion to its accuracy. We study this problem on a real fabrication history, thirteen to fourteen process runs of a single device: a small-sample, hierarchically structured setting unlike the large-corpus regime of conventional virtual metrology. Decomposing the variance of device gain, we find that roughly half of it lies between process runs rather than within them, so recipe-only prediction is bounded by construction. Building on these findings we provide a forward gain predictor with a relative, uncertainty-aware signal, an inverse search that returns recipes for a target gain, and, as the foundation for all of it, a multi-level data-quality assessment tailored to the nested physical entities of fabrication (batch, wafer, die) with an explicit cross-level linkage score. The normalized dataset and analysis code are released for full reproducibility.

0.26

KolTa: A Physics-Informed Active Learning Framework for Formulation Discovery with Limited Data

cs.LG ·2026-11-04 ·Boyong Tang, Lei Yang, Tao Wang
similarity 0.53
Abstract · 21 pages, including 11 pages of supplementary material, with 4 figures. In v2, we updated the author order, revised one affiliation address,…

Finding high-performing formulations is difficult when few have been measured and experimental budgets are limited. We propose KolTa, an active learning framework that selects batches to discover the top 5% of formulations at a target temperature under a fixed query budget. KolTa combines a three-stage predictor of component contributions, role-conditioned interactions, and anchored temperature response with task-specific soft physics constraints. Its Physics-Residual-Calibrated Upper Confidence Bound (PRC-UCB) acquisition rule combines predicted utility, ensemble disagreement, and a target-temperature physics residual, with nonnegative exploration weights fitted to out-of-fold signed errors. We evaluate the framework on three measured tasks and one simulated task covering binary-mixture viscosity, drug solubility, ionic-liquid viscosity, and electrolyte conductivity. KolTa ranks first or second in mean area under the learning curve (AULC) on every task and outperforms seven of the eight comparator strategies in paired tests, winning 75 of 78 paired comparisons across tasks and seeds against those seven strategies. Across the three measured tasks, its largest gap to the best mean AULC is 0.032, compared with at least 0.056 for every comparator. On Drug, reaching 80% average recovery of the remaining targets across drugs requires an estimated median of 348 additional formulation queries, about 18% fewer than the fastest comparator. Researchers can adapt the framework to diverse formulation problems through component roles and physical constraints.

0.20

Physics-Informed and Hybrid Machine Learning in Additive Manufacturing: Application to Fused Filament Fabrication

cs.LG cs.CEstat.CO ·2026-08-18 ·Berkcan Kapusuzoglu, Sankaran Mahadevan
publishedhighly cited similarity 0.53
Abstract · 11 pages, JOM (Journal of The Minerals, Metals & Materials Society)

This article investigates several physics-informed and hybrid machine learning strategies that incorporate physics knowledge in experimental data-driven deep-learning models for predicting the bond quality and porosity of fused filament fabrication (FFF) parts. Three types of strategies are explored to incorporate physics constraints and multi-physics FFF simulation results into a deep neural network (DNN), thus ensuring consistency with physical laws: (1) incorporate physics constraints within the loss function of the DNN, (2) use physics model outputs as additional inputs to the DNN model, and (3) pre-train a DNN model with physics model input-output and then update it with experimental data. These strategies help to enforce a physically consistent relationship between bond quality and tensile strength, thus making porosity predictions physically meaningful. Eight different combinations of the above strategies are investigated. The results show how the combination of multiple strategies produces accurate machine learning models even with limited experimental data.

0.63

Physics-informed learning for the inverse problem in resonant ultrasound spectroscopy

cs.LG cond-mat.mtrl-sciphysics.app-phphysics.comp-ph ·2026-08-27 ·Alejandro Cubillos Muñoz, Manuela Rivas, Julian Rincon
benchmark similarity 0.52
Abstract · 15 pages, 8 figures, 3 tables

Inferring elastic constants from resonant ultrasound spectra is a nonlinear and typically overdetermined inverse problem based on finite spectral data. We formulate the Rayleigh-Ritz inverse problem as a constrained inverse-isospectral problem on the set of physically admissible elasticity tensors. This induces effective low-dimensional variables for the inverse map on the admissible elasticity manifold: length and elastic scales, aspect-ratio coordinates, scale-free spectral features, and stability-respecting elastic ratios. We use these variables to construct a physics-informed learning pipeline in which a regression model acts only on reduced spectral and geometric features, while scale recovery and final elastic-constant reconstruction are imposed analytically. For the full cubic benchmark, the reconstructed constants have MAE values of $20.37(35.15)$, $24.30(41.33)$, and $2.13(3.66)~\mathrm{GPa}$ for $C_{11}$, $C_{12}$, and $C_{44}$. In the fixed-geometry benchmark, the corresponding cubic MAPE values are $4.14(3.87)\%$, $8.31(8.50)\%$, and $2.44(2.86)\%$, while the isotropic values are $4.0(3.6)\%$ and $0.4(0.3)\%$ for the bulk and shear moduli. The inverse problem then becomes a constrained regression problem in variables adapted to the geometry, scaling, crystal symmetry, and thermodynamic stability of Hookean elasticity.

0.28

Information fusion and machine learning for sensitivity analysis using physics knowledge and experimental data

cs.CE cs.LGstat.MEstat.ML ·2026-08-18 ·Berkcan Kapusuzoglu, Sankaran Mahadevan
publishedcode/datahighly cited similarity 0.52
Abstract · Reliability Engineering & System Safety

When computational models (either physics-based or data-driven) are used for the sensitivity analysis of engineering systems, the sensitivity estimate is affected by the accuracy and uncertainty of the model. This paper considers global sensitivity analysis (GSA) for situations where both a physics-based model and experimental observations are available, and investigates physics-informed machine learning strategies to effectively combine the two sources of information in order to maximize the accuracy of the sensitivity estimate. Two representative machine learning (ML) techniques are considered, namely, deep neural networks (DNN) and Gaussian process (GP) modeling, and two strategies for incorporating physics knowledge within these techniques are investigated, namely: (i) incorporating loss functions in the ML models to enforce physics constraints, and (ii) pre-training and updating the ML model using simulation and experimental data respectively. Four different models are built for each type (DNN and GP), and the uncertainties in these models are included in the Sobol indices computation. The DNN-based models, with many degrees of freedom in terms of model parameters and training options, are found to result in smaller bounds on the sensitivity estimates when compared to the GP-based models. The proposed methods are illustrated for additive manufacturing and lake temperature modeling examples.

0.62

IPM-FM: A Foundation Model with Consensus Feature Selection for Industrial Process Monitoring

cs.LG cs.AI ·2026-09-08 ·Liang Cao, Weide Liu, Yan Qin, Jun Cheng, Weisi Lin +1 more
similarity 0.52
Abstract

Industrial process monitoring is fundamental to the safety and economic performance of modern process plants. Current practice remains a one-task-one-model paradigm that is label-inefficient and prone to degradation under operating drift. Foundation models have reshaped language, vision, and generic time-series forecasting, but it has not been adapted to industrial process monitoring. This setting poses domain-specific challenges, including safety-critical decisions and asymmetric sampling between process variables and laboratory measurements. We propose the industrial process monitoring foundation model (IPM-FM). It first learns general-purpose representations from unlabeled industrial process data through self-supervised pretraining, then adapts to specific monitoring tasks using a small amount of task-labeled data, and finally produces calibrated predictions through an uncertainty-aware prediction head. IPM-FM integrates a self-supervised Informer backbone with a multi-criteria consensus feature selector, a recursive lag-feature regression head, and a calibrated Monte Carlo dropout uncertainty module. On a seven-year hydrotreater dataset for diesel flash-point soft sensing, IPM-FM attains an RMSE of 2.99, $R^2$ of 0.50, and 97\% coverage of its 95\% predictive interval, outperforming the strongest classical and from-scratch sequence baselines by 8.3\% and 14.6\% in RMSE respectively, supporting the viability of a unified pretraining--adaptation framework for industrial process monitoring.

0.29

Diffusion Based Unpaired Data Learning for Inverse Problems

cs.CV ·2026-09-01 ·Chenglong Bao, Yiming Dang, Chenguang Duan, Yuling Jiao, Defeng Sun
theory similarity 0.52
Abstract · 30 pages, 7 figures

Data is important in many deep learning-based inverse problem solvers. However, obtaining sufficient paired data in many scenarios remains highly challenging, while unpaired data is cheap. To maximize data utilization, this paper proposes LUD-DIF, a diffusion-based approach for solving inverse problems with unpaired data. Starting from the evidence lower bound (ELBO) of the joint distribution, we decouple it into two independent diffusion processes under the weak-coupling assumption. The method provides theoretical support from a variational inference perspective, derives the loss function, quantitatively analyzes the error bound introduced by the assumption, and offers a theorem-motivated heuristic for hyperparameter selection. Experimental results demonstrate that LUD-DIF achieves outstanding performance on multiple image inverse problems, validating its effectiveness and generalization capability in unpaired inverse problem settings.

0.20

ANaLOG: Anisotropic Native-Latent Operator Guidance for Solving Inverse Problems

eess.IV cs.CV ·2026-09-25 ·Darshan Thaker, Lachlan Ewen MacDonald, René Vidal
similarity 0.52
Abstract

Native-latent guidance is a recent paradigm for solving inverse problems with latent diffusion models. It replaces repeated evaluations of the image-space forward model, each requiring a decoder pass, with efficient guidance computed using a learned latent-space surrogate. However, existing methods apply guidance uniformly across latent dimensions, ignoring that measurements are informative only along certain directions and that the reliability of model predictions varies across inputs and timesteps. We propose ANaLOG, a framework for efficient uncertainty-aware guidance with pretrained latent diffusion models. ANaLOG models uncertainty by learning an anisotropic, input- and time-dependent covariance that is integrated into the guidance mechanism to emphasize reliable directions and downweight uncertain ones. We theoretically analyze this framework in a linear model setting and prove that anisotropic, uncertainty-aware weighting is necessary for correct sampling, whereas isotropic guidance induces sampling errors. Experiments across five challenging inverse problems show that ANaLOG improves perceptual reconstruction quality over existing methods while preserving efficiency.

0.23