CS Paper Radar

"Is Low Power Enough?" Rethinking Energy Efficiency in High-Fidelity Sensing

Chae Young Lee, Lan Mei, Jesse Fonseca, Zerina Kapetanovic

cs.AR ·submitted 2026-10-10 08:30 UTC · v1
position

Abstract

For two decades, long-lived sensor nodes have been built from the lowest-power parts, because their scalar readings take only milliseconds to acquire and send. Scientists now want higher fidelity data from the field, such as images and audio, and these observations break that rule: a low-power microcontroller stays awake for seconds to read, store, and transmit each one, so low power is no longer low energy. We argue that long-lived, high-fidelity nodes should instead be built around a more capable microcontroller, provided the whole board sleeps deeply. We revisit two principles from early sensor networks, "race to sleep" and "talk less", for high-fidelity data and on-device AI, and test them by comparing the STM32N6, which pairs a fast core with a neural accelerator, against the low-power Apollo4 Plus. Although the STM32N6 draws 1.9x more power, it completes an observation (capture, storage, on-board detection, and a LoRa transmission) 9.9x faster and so uses 5.2x less energy. On the same model, it runs inference with 3.2-11.4x less energy, and it fits models over 23 points more accurate. A high-fidelity node lives longest when it finishes quickly, sleeps deeply, and sends only what matters.

Closest papers

Nearest neighbours by meaning across the whole index.

Memento: Communicating Sensor Observations Through Shared Memory

cs.NI ·2026-10-13 ·Chae Young Lee, Lan Mei, Yifan Yang, Sara Achour, Zerina Kapetanovic
similarity 0.64
Abstract

Wireless sensing systems often transmit highly redundant observations, making communication a bottleneck for low-power devices. We present Memento, a communication system that exploits recurring content by transmitting observations by reference. The sender embeds each observation and searches a shared vector table stored in persistent memory. When it finds a sufficiently similar prior observation, it sends a compact reference; otherwise, it sends the observation itself and adds it to the table. This design shifts work from wireless communication to local computation and storage, without requiring a fixed task-specific model. We implement Memento on a microcontroller with an SD card and evaluate it on three image datasets and one radar dataset. Memento provides favorable accuracy-communication and accuracy-energy tradeoffs against compression-based and task-oriented baselines. At high-accuracy operating points, it matches cloud classification accuracy on three workloads while using 5.5 to 27.1 times less energy, and comes within 0.14 percentage points on a fourth while using 14.7 times less energy. These results show that retrieval over persistent local memory can reduce communication costs in recurrent sensing workloads.

0.18

TinyML Hits the Memory Wall: A Benchmark of Ten Sub-Watt Edge Devices

cs.AR ·2026-11-02 ·Pietro Bonazzi, Luigi Capogrosso, Ahmet Celik, Rosanna Manzo, Marco Giordano +3 more
benchmark similarity 0.60
Abstract

Neural network inference at the edge must fit tight energy budgets. Existing benchmarks compare few devices, do not report energy on a common basis, and omit the newest microcontrollers with an NPU or the 1 GHz Cortex-M85. Hardware-aware design also ranks networks by MAC count, yet no study has tested whether this proxy holds across accelerators. We benchmark sub-watt edge AI hardware by evaluating four CNNs (MobileNetV3, MCUNetV1, EfficientNet, SqueezeNet) and two tiny transformers (MobileViT-XXS, DeiT-tiny) on ten commercial devices: an in-sensor DSP (Sony IMX500), four MCUs with an NPU (STM32N6, Alif Ensemble E7/E8, GreenWaves GAP9), and five MCUs without an NPU (STM32U5, Apollo510B, ESP32-S3 Xtensa LX7, RA8M2, STM32V8). Four devices are novel (Alif E8, Apollo510B, RA8M2, STM32V8). Measured as energy above idle, the IMX500 (0.13-0.35 mJ) uses 1.3-3x less energy than the STM32N6 (0.31-1.05 mJ) on every model; the GAP9 uses the least on MobileNetV3 and the Alif E7 the least on MCUNetV1 and SqueezeNet. All four use 6-34x less energy than the STM32V8 (1.85-3.98 mJ), and the Alif E7 and IMX500 form the power-performance Pareto front. Latency on all four accelerators scales with memory traffic (bytes of weights and activations, r >= 0.98) and not with MACs, so they are memory-bound, while no MCU without an NPU is. The NPU advantage grows with intensity from 1.4x over a 1 GHz Cortex-M85 on MCUNetV1 to 8.2x on SqueezeNet. MAC count is therefore a misleading cost proxy for sub-watt accelerators.

0.05

Towards an Expressivity-Normalized Energy-Demand Comparison of ANNs and SNNs

cs.LG ·2026-08-30 ·Miriam Kranzlmüller, Pascal Esser, Gitta Kutyniok
similarity 0.57
Abstract

Spiking neural networks (SNNs) are often regarded as energy-efficient alternatives to artificial neural networks (ANNs), yet their advantage depends critically on both network architecture and data properties. We develop an analytical framework to compare fully-connected ReLU ANNs and integrate-and-fire SNNs for time-series data with respect to their theoretical energy efficiency at matched expressive capacity. By relating an inference-energy model to theoretical bounds on representational expressivity, we derive an expressivity-normalized efficiency ratio and explicit thresholds in network width, spike sparsity, and ANN depth scaling. Our analysis characterizes the regimes in which event-driven computation offsets the temporal overhead of SNNs, providing capacity-aware principles for designing energy-efficient temporal networks. It shows that ANNs exceed SNNs in expressivity-normalized efficiency only in specific regimes.

0.07

EEG2MCU: Sensing-to-Execution Co-Design for Wearable EEG Inference

cs.LG cs.ARcs.HCeess.SP ·2026-11-17 ·Shoma Yukawa, Meghna Roychowdhury, Arnab Sanyal, Chengwei Zhou, Shreyas Sen +1 more
published similarity 0.57
Abstract · 7 pages, 9 figures, 3 tables. Accepted at DATE 2027

Wearable EEG inference is constrained not only by model size, but also by the channel-dependent sensing front end that must process high-dimensional inputs before compact downstream computation. We present EEG2MCU, a sensing-to-execution co-design framework that treats electrode count as a hardware design variable through task-aware montage selection. EEG2MCU retains a compact time-frequency representation and generates only the INT8 regions required by each first-layer tile, avoiding full input materialization. Halo reuse and access-aware placement across Flash, SRAM, and tightly coupled memory further reduce redundant generation and data movement. On a Cortex-M7 MCU, EEG2MCU reduces peak SRAM by 11.38x relative to the baseline, including a 1.71x reduction from the 62-to-19 electrode montage, while reducing latency by 2.57x and energy by 2.48x. It retains 94-96% of full-montage accuracy, demonstrating practical high-dimensional EEG inference under tight embedded-resource constraints.

0.48

An Energy-Proportional Multimodal and Context-Aware Vision IoT Node

eess.IV ·2026-08-24 ·Julian Moosmann, Philipp Mayer, Luca Benini, Michele Magno
published similarity 0.56
Abstract

While recent advancements in TinyML have significantly reduced the computational complexity of on-device vision pipelines, image acquisition remains a dominant contributor to system-level energy consumption and memory footprint. In vision-enabled IoT platforms, the image sensor consumes energy comparable to the inference engine, thereby offsetting algorithmic efficiency gains. Consequently, current designs face a fundamental trade-off: continuous and always-on sensing incurs prohibitive energy consumption, whereas aggressive duty cycling increases latency and risks missing transient events. This work presents an energy-proportional, context-aware vision IoT node that addresses this challenge through a heterogeneous multimodal dual-camera architecture. Detection and recognition are decoupled by combining an event-based imager operating asynchronously in an energy-efficient always-on wake-on-motion mode together with an RGB imager. Deployed on a low-power microcontroller, a novel TinyissimoYOLOv12 is introduced for efficient and accurate object detection. By activating the high-power image acquisition and processing stages only upon sparse visual triggers, the proposed architecture improves efficiency and latency, eliminating redundant sensing while maintaining continuous monitoring coverage. Experimental results demonstrate an energy consumption of only 222$μ$Wh. Upon a motion trigger, the system completes a full sense-to-report cycle-RGB acquisition, object detection across 80 classes, and LoRa telemetry-with a total energy consumption of 28.7mJ. The network achieves up to 32.3% mAP with a model size of 1 million parameters. At a 1% daily activity ratio, the platform achieves a three-month operational lifetime with a 1.85Wh battery, enabling always-on visual monitoring in a place-and-forget scenario through autonomous edge intelligence.

0.28

Small-World Communication Fabrics for Neuromorphic Multicore-SoCs

cs.ET ·2026-08-25 ·Sebastian Billaudelle, Christian Metzner, Jimmy Weber, Zhe Su, Chenxi Wen +5 more
hot direction similarity 0.56
Abstract

As neuromorphic systems scale beyond a single core, inter-core event communication can become a dominant contributor to memory footprint, latency, and energy consumption. Biological neural systems address a similar scaling challenge through small-world organization, combining dense local connectivity with sparse long-range projections. In this work, we compare two recent multicore neuromorphic systems implemented in the same 22-nm FDSOI technology and explicitly optimized for such connectivity. The first, NeoCorAl, uses an asynchronous packet-switched tree with hierarchical multicast, whereas the second, MOSAIC, employs an RRAM-based, circuit-switched two-dimensional mesh that performs routing in memory. We examine the resulting trade-offs in routing flexibility, hop count, memory requirements, multicast efficiency, and scalability. We further study how the relative efficiency of tree- and mesh-based routing depends on communication locality in spatially-embedded, random, and layered networks. Finally, we discuss routing-aware training as a means of jointly optimizing neural connectivity, task performance, and hardware mappability.

0.56

Does per-frame early exit pay? A compute-matched study of dynamic depth for on-device speech enhancement

eess.AS cs.LGcs.SD ·2026-09-24 ·Clément Laroche, Riccardo Miccini
similarity 0.55
Abstract

Deep learning-based speech enhancement is increasingly deployed on-device in hearing aids, headsets, and earbuds. Most of these devices, however, can only accelerate static int8 graphs, so a depth-varying network must be implemented as several graphs, orchestrated by a policy. In this paper, we supervise every intermediate depth of one causal model, then we fine-tune its output heads to guarantee that deeper outputs are never worse than shallower ones. Using this training protocol, we can derive a family of static models that are more Pareto-efficient than their equivalently-sized counterparts trained from scratch on the same budget. Specifically, we achieve up to 0.11 higher PESQ for equivalent compute, and match the best PESQ at 30% less compute. We then quantize the models to int8 and measure the latency-quality frontier on an STM32N6 microcontroller. On VoiceBank-DEMAND, the dynamic enhancer lies on the same frontier as the static models, rather than trading quality for dynamic execution. Running the policy on the companion Cortex-M55 takes only 26 $μ$s per frame, while splitting the enhancer into separate NPU graphs adds 2.2% latency overhead. The cost of dynamic execution is therefore small.

0.24

Keeping Inference in the Radio: Design and Measurement of a Spiking Accelerator for mmWave ISAC Activity Recognition

cs.NI cs.ARcs.LG ·2026-10-27 ·Anthony Sánchez, Rafael Ruiz, José A. Belloch, Jesús O. Lacruz, Joerg Widmer
code/data similarity 0.55
Abstract

Integrated sensing and communication allows wireless networks to recognize human activity from the channel estimates that the receiver computes anyway. The inference, however, runs on the general-purpose processors of the base station, access point or handset, which are the first components a device switches off to save energy. Always-on sensing therefore requires a classifier that is small enough to remain powered while the rest of the system sleeps. We investigate whether Spiking Neural Networks (SNNs) can provide such a classifier. To this end, we generate SNN accelerators for micro-Doppler activity recognition on the public DISC dataset (IEEE 802.11ay at 60 GHz) with the open-source Spiker+ framework, and implement them together with a spike encoder on a ZCU208 RFSoC, so that the complete chain from micro-Doppler frame to activity label runs in programmable logic. A fully connected SNN with 132 neurons achieves 94.7 % accuracy (90.7 % macro-F1) on unseen subjects and performs an inference in 206 microseconds. Compared to conventional networks of the same topology on the same device, it requires an eighth of the logic and 3.4X less dynamic energy per decision than a network fed the same binary spikes, at comparable accuracy, and 7.6X less than a network fed the 16-bit spectrogram, at 1.2 points lower accuracy. Quantization-aware training reduces its weights to 3 bits within half a percentage point of the 6-bit network at the same encoder threshold

0.33