CS Paper Radar

C2Flight: A Closed-Loop Co-Simulation Framework for Early-Stage Evaluation of Heterogeneous UAV Computing Systems

Xizhu Chen, Shuyuan Zhang, Yixuan Li, Huazhong Yang, Yu Wang, Jincheng Yu, Hongyang Jia

cs.RO ·submitted 2026-10-10 08:31 UTC · v1

Abstract

Early-stage design of heterogeneous UAV computing systems requires evaluating how algorithm, hardware, communication, and system topology affect closed-loop flight before the complete system is available. However, design choices interact through the robotic feedback loop, making task performance difficult to predict from isolated component metrics, while existing execution-driven approaches postpone system-level design feedback until the computing system is integrated. This work presents C2Flight, a closed-loop co-simulation framework that represents target systems as parameterized dataflow graphs and integrates models of hardware under design with independently accessible physical hardware through a unified node interface. Its graph runtime captures the combined effects of buffering, activation, resource sharing, communication, and local timing on closed-loop flight behavior. Validation against onboard and wireless offboard physical computing pipelines confirms its timing fidelity and closed-loop prediction accuracy. Two case studies demonstrate early-stage exploration of deployment and accelerator bit-width choices. These results show that C2Flight exposes system-level design trade-offs before full-system integration, enabling rapid early-stage design refinement.

Closest papers

Nearest neighbours by meaning across the whole index.

APEX-RBD: Mixed-Precision Exploration Framework for Hardware-Efficient Robot Dynamics Accelerator Design

cs.AR cs.RO ·2026-09-04 ·Xingyu Liu, Hanwei Fan, Chaofang Ma, Jiawei Liang, Guangyu Hu +2 more
similarity 0.64
Abstract

Rigid Body Dynamics (RBD) forms the computational core of real-time robotic control, but its immense computational complexity creates a performance bottleneck that necessitates dedicated hardware accelerators. However, the substantial hardware resource and power costs of these accelerators make their deployment on resource-constrained edge platforms highly challenging. While quantization offers a promising path to optimize RBD hardware for edge computing, existing uniform-precision approaches remain inefficient by ignoring the diverse quantization sensitivities of different variables. Although mixed-precision offers a superior alternative, its exploration is intractable due to a vast search space and the prohibitive cost of closed-loop simulation for motion accuracy evaluation. To address these challenges, we introduce APEX-RBD, an automated framework that makes mixed-precision exploration computationally tractable while effectively identifying hardware-efficient configurations. Specifically, it performs physics-driven search space pruning via variable grouping and sensitivity analysis, and employs a data-efficient, prior-informed surrogate model to enable rapid trajectory error prediction. This formulation guides a hybrid optimizer to identify area- and power-efficient designs under user-defined accuracy and performance constraints. Experimental results demonstrate that APEX-RBD discovers designs achieving up to 1.9$\times$ area reduction and 1.8$\times$ power savings compared to uniform-precision baselines across diverse robotic platforms.

0.09

Designing, Deployment and Field Testing of C2Stack for Networked Intelligent Software-Defined UAVs

eess.SY ·2026-08-28 ·Maxwell McManus, Zhaoxi Zhang, Sidharth Santhi Nivas, Yuqing Cui, Prem Sagar Pattanshetty Vasanth Kumar +6 more
top venue similarity 0.62
Abstract

Unmanned Aerial Vehicles (UAVs) are emerging as critical enablers of next-generation wireless networking and autonomous systems. Despite their potential, deploying and testing networked UAV systems in real-world environments remains challenging, largely due to the absence of well-developed, end-to-end, ready-to-use protocol stacks. To fill this gap, we present C2Stack, a configurable protocol stack and experimental framework designed for real-time control, evaluation, and optimization of UAV networks. C2Stack incorporates a modular control plane, referred to as the~C2Stack Network Operating System (CNOS), alongside a programmable data plane that exposes APIs for cross-layer algorithm development, digital twin integration, and autonomous swarm control. In this article, we share our experience with the deployment and testing of C2Stack. We implemented C2Stack on a custom UAV swarm platform that integrates multiprocessor system-on-chip (MPSoC) radios with Intel NUC computing modules, enabling interoperability with various RF front ends. Field trials were conducted in both netted environments and large-scale outdoor test ranges, focusing on two representative use cases: (i) network utility maximization through online reinforcement learning, and (ii) collaborative interference source localization. The experiments demonstrate the feasibility of real-time, data-driven optimization in dynamic aerial environments, while also revealing practical challenges in field deployments of networked UAV systems, including power constraints, sensing limitations, and deployment logistics. We have made C2Stack source code available to the community under the MIT License, with the goal of establishing it as a foundational framework for experimental research on intelligent networked aerial systems.

0.37

Redwood: A Frontier AI Accelerator Designed, Verified, and Deployed from Scratch in 2 Weeks by AI

cs.AR cs.AI ·2026-08-26 ·Architect Labs
similarity 0.62
Abstract · 7 Pages, and 15 figures

Modern AI workloads and the hardware that runs them evolve on different timescales: architectural definition precedes volume silicon by years, while target workloads shift in months. Design decisions are therefore committed under deep uncertainty and paid for twice, once in the generality added as a hedge, and again when new workloads map poorly onto frozen silicon. As Moore's Law stagnates, specialization is the main remaining source of performance-per-watt and demands a design cycle that runs at the cadence of the workloads. We present an end-to-end AI system that collapses the software-to-silicon stack into a single optimization loop, where hardware and software are co-designed and verified under one objective. Its first demonstration is Redwood, a frontier AI accelerator built for single-batch, low-power, ultra-low-latency inference for physical AI. From a high-level specification by two human architects, the system autonomously generated the performance model, RTL design, UVM environments, formal proofs, firmware, and kernels in under two weeks with no human intervention below the specification. Every block reached 95% coverage via commercial EDA tools, our proprietary formal engine, and hardware-in-the-loop validation. Specification changes were reverified and redeployed to hardware in under 48 hours. Redwood Nano, its ultra-low-power FPGA variant, runs multi-billion-parameter models like Llama and Qwen. Projected onto Samsung 8 nm, the Jetson Orin Nano's process class, Redwood delivers 1.75x the throughput at 1.9x lower power, a 3.4x performance-per-watt gain against a measured Jetson baseline on the same models. Qwen running on Redwood also helped design next-generation Redwood, an early step toward recursive self-improvement. To our knowledge, this is the first production-worthy AI accelerator designed end-to-end by an AI system and running a modern AI model.

0.40

VIPER: Architecture-Aware Performance Modeling for Processing-in-Memory Design-Space Exploration

cs.AR ·2026-08-24 ·Haoran Geng, Tomas Sousa Pereira, Xiaoyang Lu, Xian-He Sun, Michael Niemier +1 more
code/data similarity 0.60
Abstract · 14 pages, 12 figures. Source code available at https://github.com/Notre-Dame-HW-SW-Codesign-Lab/VIPER

Processing-in-Memory (PIM) promises to reduce data movement overhead by executing computation in or near memory, but its realized application speedup remains highly design-dependent. Non-offloadable host execution, host-PIM transfers, limited PIM capacity, and device programming latency can limit end-to-end speedup, making fast early-stage design-space exploration (DSE) essential. However, existing PIM evaluation methods remain limited: circuit- and device-level tools cannot capture these end-to-end PIM performance factors, while cycle-accurate simulation is too slow for iterative DSE. To address this gap, we present VIPER, a unified, lightweight, and architecture-aware performance evaluation framework for PIM DSE. VIPER profiles host execution once and combines the measured host behavior with a PIM-aware analytical engine that sweeps PIM-side parameters across candidate designs. It supports both Processing Near Memory (PNM) and Processing Using Memory (PUM) under task-offloading and data-triggered execution by capturing host-PIM transfer, array access, in-memory computation, device programming latency, and capacity-induced partitioning, providing rapid architecture-aware performance estimates for iterative DSE without repeated cycle-accurate simulation. We validate VIPER against a commercial UPMEM system and more than 400 cycle-accurate gem5 configurations. VIPER predicts the UPMEM offloading decision and break-even region a priori, and, with a refined transfer model, captures the measured peak-and-rolloff behavior with 12\% mean speedup error across the DPU sweep (6\% up to the 256-DPU peak). Against gem5, VIPER achieves less than 10\% error while reducing evaluation time from hours to under one minute. Case studies of UPMEM, ReRAM/FeFET crossbars, and IMCRYPTO show that architecture-aware DSE reveals key performance trade-offs that device-level evaluation misses.

0.24

AccelMPC: High-Rate, Low-Power FPGA-Accelerated Model Predictive Control for Tiny Drones

cs.RO eess.SY ·2026-09-08 ·Andrea Grillo, Brian Plancher
code/data similarity 0.60
Abstract · 8 pages, 8 figures, 2 tables

Unlocking the potential of tiny aerial robots requires order of magnitude improvements in the performance of embedded edge control. In particular, although recent cached model predictive control (MPC) solvers can handle the fast system dynamics and complex constraints required for agile drone flight, their computational demands remain prohibitive for resource-constrained robots, forcing prior implementations to operate at reduced control rates. AccelMPC overcomes this challenge through an end-to-end co-design approach that jointly optimizes the solver algorithm, numerical representation, hardware mapping, and physical integration. AccelMPC pairs a co-designed FPGA-accelerated alternating direction method of multipliers (ADMM)-based MPC solver with a custom 6g PCB, providing high-bandwidth communication for deployment on a 35g Crazyflie. Hardware experiments demonstrate 1 kHz onboard constrained MPC with dynamic obstacles, up to 15.6x faster solve times and 195.4x improvement in energy-delay product over state-of-the-art embedded microcontroller-based solvers, all while scaling to optimization problems with over 20,000 optimization variables and a comparable number of constraints. We release our PCB design files, firmware, and FPGA solver code open source.

0.42

ServeTwin: A Benchmark-Validated Simulator for Distributed LLM Architecture Exploration

cs.PF cs.DC ·2026-10-02 ·Sungjoon Park, Changue Jung, Kyungno Joo, Mincheol Kang, Jaehyung Ahn +2 more
benchmark similarity 0.60
Abstract

Evaluating distributed LLM serving designs on physical clusters is costly. Yet existing simulators provide only subsets of the capabilities needed for realistic design exploration: stateful closed-loop execution, timing prediction without profiling target hardware, and direct execution of unmodified serving benchmarks. We present ServeTwin, a closed-loop simulator that couples specification-driven analytical timing with a stateful serving loop. This coupling captures feedback among request completion, scheduling, queue state, and KV-cache evolution, including prefill-decode disaggregation and multi-turn agent workloads. ServeTwin avoids target-hardware operator profiling through iSTAGE, an analytical trace generator that derives per-iteration traces from model and engine specifications while representing ragged batches and discrete engine mechanisms such as CUDA-graph batch padding. It further decomposes execution time into component-owned throughput, scheduler, and runtime costs. This ownership lets unaffected parameters transfer across platforms and confines recalibration to changed hardware or software components. ServeTwin implements a vLLM-compatible interface and runs unmodified serving benchmarks. Against real deployments, it reproduces InferenceX's steady-state throughput-interactivity frontier with a 3.6% mean error and predicts LMBenchmark's multi-turn performance with a 9.9% error while tracking KV-cache evolution. Pre-silicon sweeps reveal that the preferred HBM bandwidth-capacity tradeoff reverses across workload states and that increasing concurrency shifts the bottleneck from memory bandwidth to scheduler and runtime overheads. Together, these capabilities enable practical exploration of distributed LLM serving systems before target hardware is available.

0.19

Model-Based Retargeting to Many-Core CPS: Simulink-to-OpenCL Workflow

cs.SE ·2026-09-24 ·Ryuga Chiba, Hiroshi Fujimoto, Takuya Azumi
published similarity 0.59
Abstract · 16 pages, 7 figures, and 3 tables. This is the preprint submitted to SEAA 2026. A revised short-paper version was published in LNCS 16863

This paper addresses the software portability gap between Model-Based Development (MBD) and advanced many-core execution for Cyber-Physical Systems (CPS). We present a workflow-preserving retargeting approach for Simulink-based CPS applications with candidate-wise data parallelism to OpenCL-based many-core processors. Rather than manually rewriting models for new platforms, our toolchain uses MathWorks GPU Coder to extract data-parallel CUDA code, which is then translated into OpenCL host and device code via a custom framework. The conversion handles syntax rewriting, API emulation, and platform-specific argument packing. We deployed this workflow for a computationally intensive Frenet-frame trajectory planner on the Kalray MPPA Coolidge2. The results demonstrate the feasibility of a workflow-preserving retargeting pipeline for the evaluated CPS workload and platform.

0.43

AERIAL: Mission-Aware LLM Selection for Language-Driven UAV Control in Flying Networks

cs.NI ·2026-10-22 ·Diana Nunes, Ricardo Amorim, Pedro Ribeiro, André Coelho, Rui Campos
benchmark similarity 0.59
Abstract · 13 pages, 3 figures

Unmanned Aerial Vehicles (UAVs) in Flying Networks (FNs) increasingly require mechanisms to translate high-level natural language objectives into executable missions. Although Large Language Models (LLMs) have demonstrated the feasibility of language-driven UAV control, existing approaches typically rely on static model configurations and overlook mission-aware performance variability. This paper presents AERIAL, a benchmark-driven framework for adaptive LLM selection in hybrid edge-cloud UAV control. AERIAL separates systematic model benchmarking from mission execution, deriving empirical scenario-model mappings and applying them at runtime for mission-aware selection. Evaluation across 720 automated simulation runs spanning navigation, spatial reasoning, and algorithm invocation revealed significant performance variability depending on scenario-model pairing. A case study integrating AERIAL with a FNs placement algorithm further validated the framework's ability to interface with domain-specific optimization modules through natural language. These results validate the effectiveness of AERIAL's adaptive model selection in improving reliability and operational robustness for autonomous UAV control in FNs.

0.25