CS Paper Radar

DSM-Free UAV Visual Localization via Latent-Depth Variable Projection and Structure-Adaptive Coupling

Yibin Ye, Xichao Teng, Shuo Chen, Xiaokai Song, Yuli Sun, Qifeng Yu, Zhang Li

cs.CV ·submitted 2026-10-10 14:20 UTC · v1
code/data

Abstract

Visual localization enables unmanned aerial vehicles (UAVs) to maintain absolute positioning in GNSS-denied environments. A common approach matches UAV images with geo-tagged orthographic maps and estimates camera pose using Perspective-n-Point (PnP) with elevations from Digital Surface Models (DSMs). However, accurate and up-to-date DSMs are often unavailable in practice. Orthographic-perspective geometry (OPG) enables DSM-free localization in scenes with varying elevations, yet existing methods typically estimate pose indirectly through intermediate matrix estimation and decomposition. To address this limitation, we propose Latent-Depth Variable Projection (LDVP), which treats the unknown scales along perspective viewing rays as latent depths. By analytically eliminating these depths and solving for the horizontal camera center in closed form given the rotation, LDVP reduces nonlinear estimation to a rotation-only problem, enabling direct recovery of metric horizontal position without assuming a planar scene. To improve localization robustness across different scene structures, we further introduce Structure-Adaptive Coupling (SAC), which uses relative scene structure inferred from monocular depth estimation to select LDVP when the matched points are not dominated by a single plane, and Planar-PnP otherwise. Our local observability analysis reveals how scene elevation variation affects the geometric constraints of OPG, providing a basis for this adaptive strategy. Extensive experiments show that LDVP consistently outperforms existing OPG-based DSM-free methods, while SAC further improves robustness across diverse scenes and substantially narrows the gap to DSM-based localization. Code will be released at https://github.com/UAV-AVL/LDVP-SAC.

Comment
15 pages, 8 figures

Closest papers

Nearest neighbours by meaning across the whole index.

DECO: Depth-Guided Co-Visibility Reasoning for Low-Altitude UAV Visual Localization

cs.CV ·2026-08-23 ·Yibin Ye, Xichao Teng, Shuo Chen, Xiaokai Song, Dongdong Guan +2 more
code/data similarity 0.74
Abstract

Unmanned aerial vehicles (UAVs) increasingly require robust visual localization in GNSS-denied environments. A common solution estimates UAV poses by matching keypoints between UAV images and geo-tagged orthographic reference maps derived from satellite or aerial imagery, followed by Perspective-\(n\)-Point (PnP) pose solving. However, such reference maps mainly record top-down surfaces such as roofs and ground planes, while vertical structures such as facades and walls are often compressed or missing. Consequently, many visually distinctive keypoints in low-altitude UAV images have no valid counterparts in the reference map, leading to redundant matches and inaccurate pose estimation. To address this issue, we propose DECO, a DEpth-guided CO-visibility reasoning framework for low-altitude UAV visual localization. DECO uses monocular depth priors to infer local surface geometry and estimate co-visible regions between UAV images and the reference map. Based on this prior, a Geometry-Saliency Coupled Co-visibility Score is introduced to jointly consider geometric co-visibility and detector saliency for keypoint ranking. In this way, DECO retains keypoints that are both visually distinctive and geometrically co-visible, improving feature matching and PnP-based pose estimation. Extensive experiments demonstrate that DECO achieves superior localization performance and can be integrated with different depth models, feature detectors, and matchers. The source code will be available at https://github.com/UAV-AVL/DECO.

0.38

Efficient and Robust Camera-independent Multiview 3D Geometric Reconstruction from Noisy Monocular Depth Estimation and Multiple Point Matching

cs.CV ·2026-09-05 ·Marius Leordeanu
similarity 0.68
Abstract · 12 pages

We present an efficient and robust method for 3D geometric reconstruction that is based solely on the camera-independent linear relationships among a given set of points, which are stable over time and robustly estimated using multiple point matches. We essentially learn, from correspondences between points across several frames, a linear geometric auto-regression matrix $\mathbf{W}$, which establishes how a point in 3D can be expressed as a linear combination of all the others. This matrix is constant and does not depend on the world coordinate system or the camera pose---it is an intrinsic property of the point set. We also show that the principal eigenvectors of $\mathbf{W}$, which all have eigenvalue $1$, provide a homogeneous representation of the 3D point configuration. The first version of our method takes advantage of noisy monocular depth maps in order to obtain, from multiple frames, a robust geometric auto-regression matrix $\mathbf{W}$ of linear relationships between the 3D points. Thus, we build on recent advances in deep learning, which now provide monocular depth estimation models that are fast but very often noisy. Our approach handles noise through robust linear estimation over several frames. The second version of our method does not need monocular depth estimation maps. It applies in cases of weak-perspective projection, when the linear combinations between the 3D points can be robustly estimated from their 2D projections in the image. Note that the camera projection matrix is never used in our derivations. Consequently, our method does not recover camera pose, but only 3D structure. This is a key difference between our method and the related literature on 3D geometric reconstruction.

0.30

ARC-Loc: Leveraging Azimuthal Ray Convergence as a Geometric Cue for Direct Cross-View Localization

cs.CV ·2026-09-04 ·Hyeongsik Kim, Mincheol Kim, Heejoon Moon, Je Hyeong Hong
top venue similarity 0.66
Abstract · Accepted to ECCV2026

Cross-view localization (CVL) estimates the pose of a ground image by matching it to a geo-referenced satellite image. To bridge the extreme viewpoint gap, mainstream pipelines rely on Bird's-Eye-View (BEV) transformations or 2D-to-3D lifting. However, deriving 3D structures from a single ground image is fundamentally ill-posed, causing these methods to endure geometric distortions and computational costs during 3D lifting or BEV projection. Furthermore, relying on external depth foundation models to resolve this introduces latency and remains susceptible to noisy predictions. In this work, we present a different approach inspired by a human navigation technique called resection, that can perform direct ground to satellite image matching and localization without relying on external depth foundation models. The key insights of our method are that (i) ground keypoints can be translated into azimuthal rays on the satellite map, and (ii) these rays ideally converge at the user location. Exploiting this geometric constraint through direct line-to-point correspondences, we introduce a minimal Azimuthal Ray Convergence (ARC) solver to identify the intersection, alongside an ARC loss to optimize the matching network. By eliminating dependencies on computationally heavy BEV transformations and external depth foundation models, our approach achieves faster, memory-efficient inference, while its explicit feature matching ensures straightforward compatibility with existing frameworks. Experiments on VIGOR and KITTI demonstrate that ARC-Loc maintains competitive localization accuracy compared to recent approaches, highlighting its practicality.

0.44

EpiTransfer: Sparse, Training-Free Long-Range Depth Estimation from Temporal Monocular Aerial Frames

cs.RO cs.CV ·2026-09-27 ·Diksha Aggarwal, Rutvik Dagadkhair, Sanjana Srivastava, Bradley Denby, Kevin Kochersberger
similarity 0.65
Abstract

Reliable 3D spatial understanding is essential for autonomous navigation, obstacle avoidance, and scene reconstruction. While state-of-the-art learned depth estimation techniques achieve high accuracy in-distribution, they often generalize poorly to novel viewpoints and altitudes. This paper presents a geometrically derived, training-free depth estimation method using epipolar transfer with only two monocular images and camera pose estimates. By leveraging camera motion to synthesize a virtual stereo pair with a freely chosen baseline, our approach transforms temporal correspondence into a stereo triangulation task while mitigating geometric degeneracies inherent to direct two-view triangulation. Validated across outdoor drone flights (to a maximum range of approximately 90\,m) and indoor OptiTrack environments against LiDAR ground truth, the method achieves an indoor AbsRel of 0.092 and $δ< 1.25$ of 0.940, comparable to direct triangulation (AbsRel 0.073) while retaining valid depth over a larger fraction of challenging scenes, and substantially outperforms off-the-shelf learning-based baselines such as ZoeDepth (AbsRel 0.225) and Depth Anything V2 (AbsRel 0.570), which are not trained or fine-tuned for this domain, with no training data required.

0.16

Learning Geometry-Aware Planning Representations for Monocular Flight with Cross-Modal Supervision

cs.RO ·2026-10-19 ·Wencan Feng, Bailing Tian, Yulin Hui, Zhiyu Li, Junjie Lu
similarity 0.65
Abstract

Existing high-speed navigation systems for micro aerial vehicles (MAVs) commonly rely on depth cameras, stereo vision, or LiDAR to obtain explicit geometric information, while monocular cameras offer a lighter and lower-cost alternative. However, monocular flight remains challenging because RGB images offer no direct metric cues and visual appearance varies considerably across environments. We propose a geometry-aware monocular visual planning framework that predicts trajectories from two image frames, their relative pose, and the MAV state. Without explicitly reconstructing depth, the proposed method complements the downstream planning objective with feature-level geometric supervision by transferring the planning-relevant representation learned by a privileged depth expert to the RGB planner through cross-modal distillation. The framework first trains a depth-based geometric expert, then distills its planning features into a monocular branch using paired RGB-D observations, and finally adapts the planner to the downstream trajectory planning objective. This design encourages the policy to learn planning-relevant geometric features, enabling collision avoidance. We further use a 3D Gaussian Splatting (3DGS) simulator to render visual observations for data collection, paired RGB-D supervision, and simulation evaluation. The planner trained in simulation is then deployed in real-world environments without real-world fine-tuning, achieving obstacle avoidance at speeds of up to 6.5 m/s.

0.17

Adapting Monocular Depth Estimation in Novel Scenes through Disparity Refinement and Robot Ego-Motion

cs.RO cs.CV ·2026-11-11 ·Dimitrios Chatziparaschis, Georgios Georgakis, Adnan I. Ansar, Shehryar Khattak, Konstantinos Karydis
similarity 0.65
Abstract · 17 pages, 12 figures, journal

The geometric understanding of a scene is a crucial component for safe and efficient robotic operations in novel and unstructured environments. The recent emergence of foundation models for Monocular Depth Estimation (MDE) has provided an opportunity to enrich robotic perception capabilities with dense long-range depth predictions, replacing expensive onboard hardware (e.g., LiDARs and stereo cameras). However, these offline models are primarily trained on affine-invariant depth representations, and their generalization to novel scenes remains unclear. In this work we present EM-ViT, a monocular depth estimation model that learns to adapt online relative depth inputs from a foundation model prior to the metric scale with observations collected during robotic operations. Motivated by the stereo camera parameterization, our method decomposes depth prediction via dense disparity refinement to recover the scene's relative structure and an effective baseline scalar prediction to determine the missing metric scale. The learning process leverages sparse LiDAR points and, optionally, the robot's Ego-Motion (EM) to rapidly train a lightweight Vision Transformer (ViT), while an internal gradient matching loss preserves the fine-grained semantic structure of the input disparity in real-time. We demonstrate the efficacy of our method on publicly available sequences, such as KITTI, and show that our online learning pipeline can adapt to novel scenes faster and with higher accuracy than existing MDE foundation models. The code and supplementary materials will be publicly available at https://emvit-mde.github.io.

0.29

SiZeUp: Fast 3D Proxy from Aerial Images via Depth Ordinal Loss

cs.CV ·2026-08-24 ·Wenjun Zhou, Yunshan Li, Qiaoyu Zhu, Weidan Xiong, Hao Zhang +2 more
top venue similarity 0.65
Abstract · SiZeUp (SZU) accepted to SIGGRAPH Asia 2026

We present SiZeUp, a fast and scalable approach for constructing large-scale 3D urban proxy models directly from calibrated oblique aerial imagery. Our method adopts a height-from-footprint representation, reducing 3D building abstraction to a low-dimensional optimization problem in which building footprints are extruded by a single height parameter. To enable efficient and robust height estimation, we introduce an ordinal depth consistency loss that enforces agreement between the relative depth ordering of rendered proxies and depth priors predicted by a monocular depth model. This is realized through a differentiable renderer that maps parametric building proxies into multi-view depth images, allowing gradients to be propagated from depth supervision to building heights. Our ordinal formulation produces stable optimization in practice and avoids explicit feature matching or dense point cloud reconstruction. Rather than relying on metric depth, which can be unreliable under monocular scale ambiguity, our ordinal depth consistency loss operates on relative depths, providing a more reliable signal across views. Combined with an efficient dynamic view selection, our approach achieves a 23-52$\times$ speedup over state-of-the-art proxy reconstruction pipelines while maintaining comparable proxy-level coverage and volume consistency, making it well suited for large-scale urban modeling tasks.

0.33

OmniVLoc: Topo-metric Visual Localization for Omnidirectional Cameras

cs.CV cs.RO ·2026-10-20 ·Zhuo Yu, Shuyang Zhang, Huihua Zhu, Wenjia Ouyang, Zuo Zuo +4 more
code/data similarity 0.64
Abstract · 8 pages, 7 figures

Omnidirectional cameras provide surround-view information, significantly overcoming the field-of-view constraints for traditional visual localization systems. However, existing localization systems fail to fully exploit the characteristics of omnidirectional cameras, struggling to deliver accurate and robust localization performance amidst scene content variations and illumination-induced appearance changes. In this work, we propose OmniVLoc, a surround-view localization system based on a topo-metric framework. By integrating state-of-the-art global place recognition and monocular depth estimation methods, we introduce a multi-constrained visual localization paradigm. By solving a scale-aware pose graph and performing precise spherical bundle adjustment, we accurately recover the metric-level pose for each query frame.Furthermore, a hierarchical verification mechanism is designed to filter out erroneous outputs across different stages, effectively bolstering the overall system robustness. Extensive experiments on both public and our custom datasets validate the superior accuracy and reliability of OmniVLoc. To benefit the community, our source code and dataset will be made publicly available upon publication.

0.38