CS Paper Radar

Toward Partitioned Reference Readout for Four-Level IGZO Memory: Device Statistics, Confusion Matrices, and INT4 Error Propagation

Huiyun Li

cs.ET ·submitted 2026-10-12 06:28 UTC · v1

Abstract

Four-level indium-gallium-zinc oxide (IGZO) 2T0C memory needs reliable state formation, sensing references, and a path from cell errors to digital weights. We analyze 107 measured DC transfer curves from 37 isolated IGZO transistors (W/L = 3/0.5 micrometers). Four gate-bias operating points inferred from the first sweep are evaluated on later sweeps of 35 devices. Device-resolved operating points reduce second-sweep across-device current standard deviation by 49.4-52.4%, yet retaining initial thresholds increases misclassified points from 37/140 to 55/140. Leave-one-device-out reference estimation gives 0/140 on the second sweep; freezing second-sweep thresholds yields 6/140 on the third. Sampling eight reference transistors on the third sweep gives a mean held-out error fraction of 0.15% over 2,000 selections, versus 4.33% with frozen thresholds on matched held-out devices. We present conditional confusion matrices, a counterfactual common-gain sensitivity, and an INT4 error-propagation proxy. A simultaneous four-state bank with eight reference cells per state requires at least 32 physical reference cells, 12.5% of a proposed 256-cell data bank before peripheral overhead. A charge-conservation model and a partitioned hierarchical error model specify the pulse, retention, and array measurements needed to test transfer from DC device statistics to pulsed 2T0C operation.

Comment
10 pages, 6 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Agentic TCAD Calibration Workflow for Oxide Semiconductor Transistors

cs.AI physics.ins-detcs.LGphysics.app-ph ·2026-09-10 ·Gyujun Jeong, Junmo Lee, Sungwon Cho, Woohyun Hwang, Kwangyou Seo +9 more
similarity 0.57
Abstract · Preprint. Submitted to an IEEE journal for review

Experimental TCAD calibration is essential for predictive technology modeling of emerging oxide semiconductor transistors. However, it remains time-consuming and expert dependent because of model ambiguity. Multiple physical models and parameter sets can reproduce the same measured transfer characteristics, while local fitting alone cannot uniquely identify the underlying device physics. We present the first demonstration of an agentic TCAD calibration workflow for a fabricated bottom-gate In--W--O (BG-IWO) transistor. Starting from the measured transfer curve and device information, the workflow uses measurement--TCAD residuals and local sensitivity tests to select bounded parameter corrections or evaluate additional physical models, and accept only updates that improve device metrics. The LLM agent orchestrates the workflow, while Sentaurus governs the device physics. For the 2\%-W reference device, five agent-suggested updates yield a fixed calibrated model, reducing the multi-metric device objective $J$ by 14.3$\times$. Maximum $V_{\mathrm{th}}$/$I_{\mathrm{on}}$ errors are 36.1~mV/0.022 decade for varying-drain-bias tests and 46.2~mV/0.062 decade for varying-channel-length tests, demonstrating model transferability across bias and geometry rather than a local parameter fit. W-composition tests provide process-sensitive insight. This agentic workflow provides a faster route to model development for emerging device technologies.

0.30

A Unified Device-Level Physical Framework for DRAM Read Disturbance

cs.AR cond-mat.mes-hallphysics.app-ph ·2026-11-13 ·Zhaoqiang Bai, Haocong Luo, Xinhe Wang, Xujing Li, Yuelin Jiang +8 more
similarity 0.55
Abstract

Read disturbance in dynamic random-access memory (DRAM) depends on both local device interactions and the electrical conditions imposed by shared array circuitry. Here, we combine DIMM-level characterization results, device measurements, and TCAD simulations to interpret RowHammer, RowPress, and ColumnDisturb within a unified device-level physical framework. We relate charge evolution at the floating storage node to three key mechanisms: trap-assisted electron migration (EM), capacitive coupling (CC), and sense-amplifier-mediated disturb (SAMD). EM is local and trap-sensitive, while CC weakens with wordline separation. SAMD extends disturbance through shared column circuitry by modifying unselected-cell leakage under rail-level bitline biases, a contribution supported by the approximately ninefold higher OFF-state leakage measured relative to retention-like conditions for a high-voltage storage state. These distinct spatial ranges account for localized RowHammer and RowPress failures and remote ColumnDisturb populations with abrupt changes at subarray boundaries. We further interpret prolonged RowPress activation as a transition from an initial RowHammer-like transient to sustained leakage driven mainly by SAMD under held wordline and bitline biases. Within this device-level framework, trap effectiveness and storage-state-dependent leakage provide an interpretation of previously puzzling failure signatures, including the earlier onset of 0-to-1 RowHammer failures despite the predominance of 1-to-0 failures at high hammer counts. The same framework explains the observed RowPress and ColumnDisturb polarities and the duration-dependent reversal of neighboring- and passing-wordline effectiveness. These results provide a physical basis for developing compact DRAM reliability models across access patterns and array configurations.

0.25

JFS-CryoMem: A Cryogenic Memory with Voltage-Controlled Superconducting Devices and Femtojoule-Scale Write/Read Energies

cs.ET cond-mat.supr-con ·2026-09-27 ·Md Rahatul Islam Udoy, Md Mazharul Islam, Juan P. Mendez, Denis Mamaluy, Aaron J. Muhowski +5 more
similarity 0.51
Abstract

Scalable cryogenic systems require memory that combines nonvolatile storage, selective access, low thermal disturbance, and compatibility with superconducting electronics. We present a cryogenic memory architecture that integrates a voltage-controlled Josephson junction field-effect transistor (JJFET) selector with a ferroelectric superconducting quantum interference device (FeSQUID) storage element, hereafter termed JFS-CryoMem. The JJFET provides gate-controlled cell selection, whereas the FeSQUID stores information in stable remanent-polarization states. JFS-CryoMem features separate read and write path mechanisms that support nondestructive readout and independent optimization of programming and sensing conditions. The architecture is evaluated using experimentally calibrated compact models that reproduce the measured electrical characteristics of both constituent devices. We demonstrate selective programming using a half-bias scheme, nonvolatile state retention, and distinguishable readout in a $4 \times 4$ array while accounting for the selected cell and all unselected parallel branches. We then extend the analysis to arrays up to $16 \times 16$ and examine how array scaling alters current distribution, column-equivalent resistance, readout separation, required bitline current, and read energy. The results reveal the principal sensing and energy tradeoffs associated with larger arrays and identify the operating conditions required to preserve read distinguishability as the array grows. JFS-CryoMem provides a device-to-array framework for cryogenic memory in quantum, high-performance, and space-oriented computing systems.

0.16

NOVA-CIM: Noise- and Correlation-Tolerant Stochastic Interfaces for Analog Compute-in-Memory

cs.AR ·2026-09-07 ·Jiachen Ren, Wenshuai Yao, Haobo Liu, Xincheng Feng, Chenxi Hu +4 more
similarity 0.51
Abstract

Analog compute-in-memory (CIM) enables energy-efficient model acceleration, but its reliance on ADC-based readout, which directly quantizes noisy column currents, makes inference accuracy highly sensitive to analog read noise, active-row scaling, and ADC precision. In this paper, we present NOVA-CIM, a noise- and correlation-tolerant stochastic interface for analog CIM by replacing multi-bit ADC readout with random-reference 1-bit sensing and reconstructing results through lightweight counting. By converting column currents into comparison probabilities, this probability-domain readout averages zero-mean dynamic read noise over stochastic samples while reducing dependence on high-resolution ADCs. We provide a unified robustness analysis showing that dynamic read noise is suppressed through temporal averaging and that spatial input-bitstream correlation increases instantaneous current variance rather than introducing first-order MAC bias. MAC-level experiments and end-to-end evaluation on ViT-Base validate the analysis: under read noise, Top-1 accuracy remains 84.48% near the 84.51% bfloat16 (BF16) baseline; under stochastic number generator (SNG) reuse, MAC bias stays near zero while root-mean-square error (RMSE) and stochastic cross-correlation (SCC) grow as predicted.

0.17

SLICE-CiM: Selective Layer-wise Inference Control Engine with Confidence-Based Early Exit for SRAM based Digital Compute-in-Memory

cs.AR cs.NE ·2026-10-27 ·Pratham Sharma, Mohd Faisal Khan, Santosh Kumar Vishvakarma
similarity 0.51
Abstract

Digital SRAM compute-in-memory (CIM) macros enable energy-efficient CNN inference by eliminating off-chip weight transfers; however, peripheral control logic introduces three inefficiencies: bit- slice over-activation at reduced precision (L1), unnecessary accumula- tion depth (L2), and idle precision-transition stalls (L3). To address these, we present four synthesizable peripheral blocks: a Flush-Merge Enable (FME) controller, a Confidence-Based Early-Exit (EE) module, a Precision Register with Decoder (PR/PD), and a Bit-Serial Cycle Controller (CC), co-designed to minimize switching activity, wordline overhead, and leakage. Implemented in TSMC 65-nm CMOS at 335 MHz, the peripheral framework occupies 1769.760 μm2 post-synthesis and 1982.131 μm2 post-PnR. Gate-level VCD analysis reports 6.0706 μW leakage and 288.2902 μW (post-synthesis) / 322.8850 μW (post-PnR) dynamic power, totaling 328.9556 μW (0.2402% of system power). The EE module dominates dynamic power (58.2%), while WLG dominates area (58.1%). System evaluation on MobileNetV2 (CIFAR-100) shows efficiency scaling from 31.35 TOPS/W (8b/8b, 1.2 V) to 454.91 TOPS/W (2b/8b, 0.8 V), achieving 13.33x improvement without bitcell modification or retraining. The framework targets CNN workloads exploiting sparsity, with Transformer extension as future work.

0.34

A Process-Aware Hybrid Si/IGO Monolithic-3D 6T SRAM with BEOL Pass-Gates for the 2nm Node

cs.AR cs.ET ·2026-08-24 ·Po-Chuan Wang, Dongwon Jang, Eknath Sarkar, Alexei Svizhenko, Md. Nahid Haque Shazon +3 more
similarity 0.50
Abstract

We propose a monolithic-3D (M3D) 6T SRAM at the 2nm node, integrating BEOL IGO pass-gates (PGs) with an all-silicon nanosheet latch, buried power rails (BPRs), and Ru interconnects. TCAD calibrated to a state-of-the-art double-gate IGO transistor with a tri-layer HfO$_2$/ZrO$_2$/HfO$_2$ (HZH) gate stack is combined with virtual fabrication and 3D parasitic extraction to realize the first process-aware layout of this topology. A novel neighbor-cell shared source/drain (S/D) bitline (BL) design enlarges the IGO contact area to mitigate contact resistance and restore PG drive without area penalty. The resulting cell achieves a 25\% footprint reduction vs the high-performance (HP) 122 Si baseline while maintaining robust static noise margin (SNM) over a wide supply voltage range. At the 128$\times$256 subarray-level, it reduces write delay by 42.2\% and EDP by 9.7\% compared to the high-density (HD) 111 Si baseline, owing to reduced cell parasitics and wordline (WL) loading from the smaller footprint.

0.27

CacheFlex: Direct Software-Managed Access to Higher-Level Cache for Scalable Vector Support

cs.AR ·2026-10-09 ·Jingqun Zhang, Maohua Nie, Jiayi Wang, Weihang Li, Rishi Sappidi +2 more
top venue similarity 0.49
Abstract · To appear in MICRO 2026. 15 pages, 9 figures, 4 tables

Wider vector/SIMD lanes multiply compute throughput, but cache improvements remain challenging. We identify L1 data cache capacity as the most impactful parameter for performance and efficiency. L1 capacity is constrained by pipeline coupling and latency requirements; private L2 offers an order of magnitude more capacity but is inaccessible from software. This work proposes CacheFlex, an ISA and microarchitecture co-design that enables software-managed, direct access to private L2 SRAM by allowing runtime conversion of parts of L2 into a scratchpad memory (SPM). Through a lightweight ISA extension, software explicitly controls data placement and lifetime within the L2. CacheFlex integrates into an out-of-order pipeline with cross-domain memory consistency and OS context-switch support, with merely 2.02% area overhead relative to the L2 in a post-layout 12 nm implementation. We prototype CacheFlex based on the Armv8-A SVE ISA, model it in gem5, and evaluate it using optimized general matrix multiplication (GEMM) kernels with diverse model-derived shapes, FlashAttention-based fused attention, and full-layer workloads from LLaMA-3.2-1B and BERT-Base in the prefill phase. As the vector length (VL) scales from VL = 4 (512-bit) to VL = 16 (2048-bit), CacheFlex's kernel-level geometric-mean speedup and memory-subsystem energy reduction grow from 1.12x and 26% to 1.44x and 40%, respectively, bridging the widening gap between per-instruction data demand and memory performance. On full transformer layers combining CacheFlex with FlashAttention, the design delivers up to 1.78x speedup and 45% memory-subsystem energy savings (BERT-Base, sequence length T=4096, VL = 16; LLaMA-3.2-1B: 1.64x and 38%). CacheFlex is complementary to hardware prefetching, and its benefit grows as vector width and peak compute throughput increase for compute-intensive AI kernels.

0.46

CAFE: Conducting-Cell-Aware Adaptive Differential Encoding for Robust DNN Inference in FeFET-Based Compute-in-Memory

cs.AR ·2026-10-14 ·Wenshuai Yao, Wenyong Zhou, Hanyong Shao, Zhiyuan Ning, Ru Huang +1 more
published similarity 0.49
Abstract · Full version of the paper accepted to the 2026 IEEE International Conference on Computer Design (ICCD). 16 figures, 1 table

Ferroelectric field-effect transistor (FeFET)-based compute-in-memory (CIM) promises energy-efficient deep neural network (DNN) inference, but device variation can severely degrade bit-sliced CIM accuracy. Prior works either rely on hardware modifications or treat such variation as generic noise, overlooking a key FeFET asymmetry: negligible off-state leakage makes errors dominated by conducting on-state cells. This asymmetry is amplified by two's-complement sign extension, which maps small negative values to high-significance bit slices and magnifies their errors during shift-and-add reconstruction. In this paper, we propose CAFE, a conducting-cell-aware adaptive differential encoding framework built upon this FeFET-specific asymmetry. CAFE introduces C$^2$AM, a bit-significance-weighted conducting-cell activity metric that predicts output deviation and inference accuracy degradation under FeFET device variation. Guided by C$^2$AM, CAFE applies differential weight and activation encoding to eliminate sign-extension-induced conducting-cell amplification. To balance robustness and cost, CAFE performs type-wise encoding enumeration, layer-wise NSGA-II search, and post-GA pruning to allocate robust encodings where the robustness-cost trade-off is favorable. Across representative vision and language workloads, CAFE reduces C$^2$AM by up to $28.6\times$; in the main deployment study, it improves accuracy over two's-complement CIM by more than 87 percentage points and approaches full-differential robustness at $1.86$-$2.78\times$ normalized cost, compared with $3.06\times$ for uniform full-differential encoding.

0.26