CS Paper Radar

A Unified Device-Level Physical Framework for DRAM Read Disturbance

Zhaoqiang Bai, Haocong Luo, Xinhe Wang, Xujing Li, Yuelin Jiang, Xuelu Huang, Guilei Wang, Hao Meng, Ataberk Olgun, Ismail Emir Yuksel, F. Nisa Bostancı, Jikun Wang, Onur Mutlu

cs.AR cond-mat.mes-hallphysics.app-ph ·submitted 2026-11-13 01:08 UTC · v1

Abstract

Read disturbance in dynamic random-access memory (DRAM) depends on both local device interactions and the electrical conditions imposed by shared array circuitry. Here, we combine DIMM-level characterization results, device measurements, and TCAD simulations to interpret RowHammer, RowPress, and ColumnDisturb within a unified device-level physical framework. We relate charge evolution at the floating storage node to three key mechanisms: trap-assisted electron migration (EM), capacitive coupling (CC), and sense-amplifier-mediated disturb (SAMD). EM is local and trap-sensitive, while CC weakens with wordline separation. SAMD extends disturbance through shared column circuitry by modifying unselected-cell leakage under rail-level bitline biases, a contribution supported by the approximately ninefold higher OFF-state leakage measured relative to retention-like conditions for a high-voltage storage state. These distinct spatial ranges account for localized RowHammer and RowPress failures and remote ColumnDisturb populations with abrupt changes at subarray boundaries. We further interpret prolonged RowPress activation as a transition from an initial RowHammer-like transient to sustained leakage driven mainly by SAMD under held wordline and bitline biases. Within this device-level framework, trap effectiveness and storage-state-dependent leakage provide an interpretation of previously puzzling failure signatures, including the earlier onset of 0-to-1 RowHammer failures despite the predominance of 1-to-0 failures at high hammer counts. The same framework explains the observed RowPress and ColumnDisturb polarities and the duration-dependent reversal of neighboring- and passing-wordline effectiveness. These results provide a physical basis for developing compact DRAM reliability models across access patterns and array configurations.

Closest papers

Nearest neighbours by meaning across the whole index.

Study of Resistive Switching Dynamics and Memory States Equilibria in Analog Filamentary Conductive-Metal-Oxide/HfOx ReRAM via Compact Modeling

cs.ET ·2026-08-26 ·Matteo Galetta, Donato Francesco Falcone, Victoria Clerico, Wooseok Choi, Stephan Menzel +5 more
publishedhighly cited similarity 0.59
Abstract

Resistive Random Access Memory (ReRAM) devices offer a promising solution for next-generation non-volatile memory and neuromorphic computing systems. Yet, existing compact models fail to capture analog resistive switching behavior of ReRAM devices. This work presents an advanced physics-based compact model for analog filamentary Conductive-Metal-Oxide (CMO)/HfOx ReRAM, capable of reproducing switching characteristics over a broad range of operating conditions. Compared to the state-of-the-art, the model extends the dynamic interplay between ion migration and electron hopping, while also accounting for parasitic resistive elements. Simulations of various voltage inputs are tested to reproduce quasi-static I-V curves, SET switching kinetics under single-pulse programming conditions, and analog accumulative conductance modulation upon bipolar identical pulse streams. Additional simulations reveal the physical criterion underlying the stabilization of the CMO/HfOx-based ReRAM memory state around the equilibrium point, namely symmetry point, under pulsing conditions when a fading memory mechanism emerges. Building upon the evidence of such equilibrium stabilization under pulsing and quasi-static conditions, a procedure is established to visualize and map equilibrium memory states across different input domains. The physical model supports design optimization of switching behavior for analog neuromorphic systems and non-volatile memory architectures. It also enables accurate integrated circuit simulations with CMO/HfOx-based ReRAM technology.

0.74

Understanding the Power Consumption of Modern High Bandwidth Memory: Experimental Analysis and Modeling Using Real HBM2 DRAM Chips

cs.AR cs.PF ·2026-10-09 ·Ataberk Olgun, Spiros Galanopoulos, Andreas Kosmas Kakolyris, İsmail Emir Yüksel, Haocong Luo +2 more
top venuecode/data similarity 0.58
Abstract · Extended version of the paper titled "Understanding the Power Consumption of Modern High Bandwidth Memory: Experimental Analysis and Modelin…

We perform the first comprehensive experimental characterization of power consumed by real HBM2 DRAM chips. Our extensive characterization yields 1) the empirical basis for developing new, accurate HBM power models or validating existing power models and 2) key insights into structural and data-pattern-dependent variation of power in HBM2 chips. Out of our 13 new findings and 6 key takeaway messages, we highlight: 1) a read operation consumes significantly higher current than any other operation and 2) the toggled data bus signals in a data transfer burst significantly affect current draw where toggling all HBM2-internal bank group bus signals causes 29.4% higher power consumption than keeping them constant. Leveraging our empirical insights into HBM2 power consumption, we engineer an access pattern that yields 23.6% higher power consumption on average across 36 tested HBM2 chips than the highest-power-consuming JEDEC-specified current measurement loop. Our results have important implications for HBM-based system design and validation. Relying solely on JEDEC- or vendor-specified test loops to bound HBM power could cause system failures and/or thermal throttling in real-world high-power AI/ML workloads. To improve 3D-stacked DRAM power modeling in open source architectural simulation infrastructures, we develop a new HBM power model. Our model predicts the power of 36 real HBM2 chips across diverse workloads (including a real LLM decode workload) with 7.6 -- 8.1% mean absolute percentage error, substantially more accurately than state-of-the-art HBM power models. The power consumption predicted by our model for a power-intensive microbenchmark closely matches (with 2.4% to 5.3% error across HBM3E's specified supply voltage range) the average HBM3E memory power consumed by three tested NVIDIA H200 GPUs. We publicly release our power model at https://github.com/CMU-SAFARI/HBM-Power.

0.56

Mitigating Row Buffer Contention Through Multiple Row Buffer (MRB) DRAM

cs.AR ·2026-11-19 ·K Chitra, Arjun Dey, Aryabartta Sahu, Minesh Patel
similarity 0.55
Abstract

DRAM chips contain multiple banks to handle sev- eral memory requests in parallel. However, requests to different rows of the same bank (e.g., from different cores or workload access patterns) interfere with each other by contending for a single shared row buffer. This introduces row buffer conflicts, which incur performance and energy overheads. In this work, we reduce row buffer conflicts caused by interference by introducing multiple row buffers in each bank. We propose multiple row buffer (MRB) DRAM, which employs a primary global row buffer along with multiple secondary SRAM row buffers in the DRAM chip. These secondary SRAM row buffers act as a cache that enables each bank to serve requests to multiple rows in parallel, thereby improving performance and reducing row buffer conflicts. Our evaluation shows that MRB-DRAM with four SRBs per bank improves performance by an average of 29.7%, 24% in singlecore, multicore systems, respectively, compared to a conventional DDR4 baseline with a modest area overhead of 2%.

0.22

HOMARD: Hammering Off-chip Memory via Aggregate power Rail Disclosure

cs.CR ·2026-10-08 ·Eliott Quéré, Li-Chung Chiang, Carina Fiedler, Thomas Rokicki, Maria Méndez Real +4 more
similarity 0.55
Abstract

Software-based microarchitectural attacks have mainly exploited timing differences to infer information from DRAM. However, defenses and optimizations can prevent timing-based approaches from resolving precise microarchitectural behaviors. We show that unprivileged millisecond- and milliampere-resolution power sensors on modern Arm SoCs can recover DRAM mapping functions and reveal the data dependence of memory accesses without timers. We present HOMARD, a methodology that reads DRAM activity from this telemetry, and two attack primitives. HOMARD-RE is a hierarchy-aware linear-algebraic method that reverse-engineers DRAM addressing functions from power alone. HOMARD-DATA recovers the Hamming weight of a fetched cache line through joint-power rail templating and secret byte values through correlation power analysis on the same rails. Across an AMD ZCU102, a Raspberry Pi 5, and a multi-chip-based LPDDR4 NVIDIA Jetson TX2, HOMARD-RE succeeds where row-buffer timing methods fail. On the Pi 5, HOMARD-DATA classifies 9 Hamming-weight levels at 81.5% accuracy and recovers secret bytes in minutes by correlating rail current with data-dependent bit toggling between neighbors in a row. Both primitives work with an architectural load or a mispredicted Spectre-RSB path on which no value is architecturally read. These results establish unprivileged power telemetry as an independent side channel for profiled microarchitectural attacks, particularly when timing falls silent.

0.29

Toward Partitioned Reference Readout for Four-Level IGZO Memory: Device Statistics, Confusion Matrices, and INT4 Error Propagation

cs.ET ·2026-10-12 ·Huiyun Li
similarity 0.55
Abstract · 10 pages, 6 figures

Four-level indium-gallium-zinc oxide (IGZO) 2T0C memory needs reliable state formation, sensing references, and a path from cell errors to digital weights. We analyze 107 measured DC transfer curves from 37 isolated IGZO transistors (W/L = 3/0.5 micrometers). Four gate-bias operating points inferred from the first sweep are evaluated on later sweeps of 35 devices. Device-resolved operating points reduce second-sweep across-device current standard deviation by 49.4-52.4%, yet retaining initial thresholds increases misclassified points from 37/140 to 55/140. Leave-one-device-out reference estimation gives 0/140 on the second sweep; freezing second-sweep thresholds yields 6/140 on the third. Sampling eight reference transistors on the third sweep gives a mean held-out error fraction of 0.15% over 2,000 selections, versus 4.33% with frozen thresholds on matched held-out devices. We present conditional confusion matrices, a counterfactual common-gain sensitivity, and an INT4 error-propagation proxy. A simultaneous four-state bank with eight reference cells per state requires at least 32 physical reference cells, 12.5% of a proposed 256-cell data bank before peripheral overhead. A charge-conservation model and a partitioned hierarchical error model specify the pulse, retention, and array measurements needed to test transfer from DC device statistics to pulsed 2T0C operation.

0.30

Beyond Host-Side Control: HBM Controller Partitioning Across Host and HBM Base Dies

cs.AR ·2026-11-07 ·Tharunya Yogananda, Wantong Li
published similarity 0.54
Abstract · Accepted to IEEE International 3D Systems Integration Conference (3DIC)

Recent generations of high bandwidth memory (HBM), such as HBM4, allow the base die of the memory stack to be manufactured using a logic process that can accommodate more complex controller functions next to the DRAM. We present the first systematic quantitative study of function-level controller placement between the host and the HBM4 base die on a silicon interposer. We divide the controller into its main functions and evaluate four placements, from a complete host controller to a complete base die controller, with intermediate placements that move maintenance or scheduling to the base die. We extend Ramulator 2 with HBM4 timing and maintenance, model a die-to-die (D2D) link with timing checks at the DRAM interface, and compose area, energy, and temperature from synthesized controller blocks, modeled storage, and interface data. A provisioned D2D link preserves per-stack bandwidth and adds about twice its one-way delay to unloaded latency. Maintenance moves to the base die with no bandwidth cost and frees host command slots, and the freed share grows with stack height. Replacing the wide interface with a D2D link saves 61% of host shoreline and 16.85 mm2 of host area per stack. The D2D link dominates the added base die area and power, and the base die runs cooler under streaming with link energy below 0.4 pJ/bit. Shared control delivers up to 1.72x the throughput of static partitioning between two requestors.

0.36

From Processing to Functionality: Engineering Accessible Material States in Cu-Embedded SiO$_x$ Memristive Devices

cs.LG cond-mat.mtrl-sciphysics.plasm-ph ·2026-09-24 ·Tobias Gergs, Rouven Lamprecht, Sahitya Yarragolla, Ole Gronenberg, Luca Vialetto +3 more
similarity 0.54
Abstract

Resistive switching in oxide-based devices is widely governed by stochastic defect processes, yet a predictive link between fabrication conditions and functional behavior remains elusive. Here, we establish a multiscale framework connecting plasma-defined deposition conditions to macroscopic device functionality in sputtered SiO$_x$/Cu/SiO$_x$-based systems. By combining large-scale statistical analysis of more than 50,000 experimentally characterized devices with physics-based plasma and atomistic simulations, we show that device behavior does not emerge from deterministic process-to-performance mappings, but from a probabilistic cascade spanning defect formation, defect-state evolution, and functional-regime emergence. Data-driven clustering reveals a continuous functional state space composed of operational switching types, while inverse modeling identifies the reconstructed oxygen-vacancy density as an effective latent descriptor capturing the combined influence of structural disorder and defect topology. This latent descriptor is strongly coupled to both Cu redistribution and electrical response, linking otherwise hidden material properties to observable device characteristics. Furthermore, macroscopic switching behavior is argued to arise from ensemble integration across spatially heterogeneous subdomains, providing a physical explanation for the pronounced variability of large-area devices. These findings shift the perspective from deterministic defect engineering toward probabilistic defect-state design and establish a physically grounded framework for understanding and controlling functional variability in such oxide-based systems, such as memristive or resistive-switching devices.

0.21

SBA: A Practical Memory Performance Denial-of-Service Attack

cs.AR ·2026-11-12 ·Amin Mamandipoor, Connor Rudy Sullivan, Cole Ridge Strickler, Mohammad Alian, Heechul Yun
top venue similarity 0.53
Abstract · Accepted for publication at the 3rd Microarchitecture Security Conference (uASC 2027)

Modern cloud platforms use memory bandwidth regulation to isolate co-located workloads, implicitly assuming that high aggregate bandwidth consumption implies high interference. We show that this assumption is fundamentally flawed. We present the Single-Bank Attack (SBA), a practical memory denial-of-service attack that induces extreme cross-core slowdowns---over three orders of magnitude on memory-intensive victims (e.g., LLM decode)---while consuming less than 1 GB/s of memory bandwidth. SBA exploits the gap between peak and worst-case DRAM throughput by concentrating memory write operations on a single bank, forcing persistent row conflicts and frequent write draining, thereby collapsing the memory service rate. Across Intel and AMD systems, including DDR5- and HBM2E-based platforms, SBA consistently causes orders-of-magnitude slowdowns under realistic multi-tenant settings, revealing a fundamental limitation of bandwidth-centric memory isolation. We further show that this localized contention propagates system-wide: single-bank congestion saturates memory controller queues and induces back-pressure into shared cache and coherence structures, ultimately throttling memory request injection across cores. Consequently, severe interference can arise even at low aggregate bandwidth, evading existing bandwidth-based QoS mechanisms such as Intel RDT MBA. To address this limitation, we propose IQ-MemGuard, a lightweight, software-based memory bandwidth regulator that detects sustained contention using microarchitectural signals and selectively throttles pathological request injection. Our implementation on an Intel platform effectively mitigates SBA, whereas Intel's hardware QoS mechanism fails completely.

0.46