CS Paper Radar

Study of Resistive Switching Dynamics and Memory States Equilibria in Analog Filamentary Conductive-Metal-Oxide/HfOx ReRAM via Compact Modeling

Matteo Galetta, Donato Francesco Falcone, Victoria Clerico, Wooseok Choi, Stephan Menzel, Antonio La Porta, Tommaso Stecconi, Folkert Horst, Bert Jan Offrein, Valeria Bragaglia

cs.ET ·submitted 2026-08-26 13:11 UTC · v1
publishedhighly cited

Abstract

Resistive Random Access Memory (ReRAM) devices offer a promising solution for next-generation non-volatile memory and neuromorphic computing systems. Yet, existing compact models fail to capture analog resistive switching behavior of ReRAM devices. This work presents an advanced physics-based compact model for analog filamentary Conductive-Metal-Oxide (CMO)/HfOx ReRAM, capable of reproducing switching characteristics over a broad range of operating conditions. Compared to the state-of-the-art, the model extends the dynamic interplay between ion migration and electron hopping, while also accounting for parasitic resistive elements. Simulations of various voltage inputs are tested to reproduce quasi-static I-V curves, SET switching kinetics under single-pulse programming conditions, and analog accumulative conductance modulation upon bipolar identical pulse streams. Additional simulations reveal the physical criterion underlying the stabilization of the CMO/HfOx-based ReRAM memory state around the equilibrium point, namely symmetry point, under pulsing conditions when a fading memory mechanism emerges. Building upon the evidence of such equilibrium stabilization under pulsing and quasi-static conditions, a procedure is established to visualize and map equilibrium memory states across different input domains. The physical model supports design optimization of switching behavior for analog neuromorphic systems and non-volatile memory architectures. It also enables accurate integrated circuit simulations with CMO/HfOx-based ReRAM technology.

Journal ref
Adv. Electron. Mater. 12, no. 7 (2026): e00373
DOI
10.1002/aelm.202500373

Closest papers

Nearest neighbours by meaning across the whole index.

Update Disturbance-Resilient Analog ReRAM Crossbar Arrays for In-Memory Deep Learning Accelerators

cs.ET ·2026-08-26 ·Wooseok Choi, Tommaso Stecconi, Donato Francesco Falcone, Matteo Galetta, Victoria Clerico +12 more
publishedhighly cited similarity 0.69
Abstract

Resistive memory (ReRAM) technologies with crossbar array architectures hold significant potential for analog AI accelerator hardware, enabling both in-memory inference and training. Recent developments have successfully demonstrated inference acceleration by offloading compute-heavy training workloads to off-chip digital processors. However, in-memory acceleration of training algorithms is crucial for more sustainable and power-efficient AI, but still in an early stage of research. This study addresses in-memory training acceleration using analog ReRAM arrays, focusing on a key challenge during fully parallel weight updates: disturbances of the weight values in cross-point devices. A ReRAM device solution is presented on 350 nm silicon technology, utilizing a resistive switching conductive metal oxide (CMO) formed on a nanoscale conductive filament within a HfOx layer. The devices not only exhibit 60 ns fast, non-volatile analog switching, but also demonstrates outstanding resilience to update disturbances, enduring over 100k pulses. The disturbance tolerance of the ReRAM is analyzed using COMSOL Multiphysics simulations, modeling the filament-induced thermoelectric energy concentration that results in a highly nonlinear device responses to input voltage amplitudes. Disturbance-free parallel weight mapping is also demonstrated on the back-end-of-line integrated ReRAM array chip. Finally, comprehensive hardware-aware neural network simulations validate the potential of our ReRAM for in-memory deep learning accelerators capable of fully parallel weight updates.

0.73

Continuous Kinetic Model of Counterion-Mediated Redox Switching in 14-Bit Molecular Memristors for Analog In-Memory Computing

cs.AR ·2026-11-02 ·Logan Larsh, Dhiman Biswas, Nazmus Saadat As-Saquib, Su-in Yi, Thirumalai Venkatesan +1 more
similarity 0.64
Abstract

Kinetic molecular memristors offer a compelling path toward high-density analog in-memory computing by achieving 14-bit precision, wherein discrete redox transitions and counterion displacements dictate non-volatile conductance across a deterministic energy landscape. However, integrating these nanoscale kinetics into macroscale circuit simulators has remained bottlenecked by derivative discontinuities and solver convergence failures. Here, we present a physics-inspired continuous kinetic model that bridges microscopic molecular transport with scalable circuit architectures. By casting discrete intramolecular states, counterion relaxation dynamics, and Marcus-Hush-Chidsey electron transfer rates into continuously differentiable state variables, we derive a robust, Spectre-compatible compact model and a matching vectorized Python solver. This work culminates in a unified computational platform to reliably predict the behavior of complex circuits built on these molecular memristors.

0.22

From Processing to Functionality: Engineering Accessible Material States in Cu-Embedded SiO$_x$ Memristive Devices

cs.LG cond-mat.mtrl-sciphysics.plasm-ph ·2026-09-24 ·Tobias Gergs, Rouven Lamprecht, Sahitya Yarragolla, Ole Gronenberg, Luca Vialetto +3 more
similarity 0.63
Abstract

Resistive switching in oxide-based devices is widely governed by stochastic defect processes, yet a predictive link between fabrication conditions and functional behavior remains elusive. Here, we establish a multiscale framework connecting plasma-defined deposition conditions to macroscopic device functionality in sputtered SiO$_x$/Cu/SiO$_x$-based systems. By combining large-scale statistical analysis of more than 50,000 experimentally characterized devices with physics-based plasma and atomistic simulations, we show that device behavior does not emerge from deterministic process-to-performance mappings, but from a probabilistic cascade spanning defect formation, defect-state evolution, and functional-regime emergence. Data-driven clustering reveals a continuous functional state space composed of operational switching types, while inverse modeling identifies the reconstructed oxygen-vacancy density as an effective latent descriptor capturing the combined influence of structural disorder and defect topology. This latent descriptor is strongly coupled to both Cu redistribution and electrical response, linking otherwise hidden material properties to observable device characteristics. Furthermore, macroscopic switching behavior is argued to arise from ensemble integration across spatially heterogeneous subdomains, providing a physical explanation for the pronounced variability of large-area devices. These findings shift the perspective from deterministic defect engineering toward probabilistic defect-state design and establish a physically grounded framework for understanding and controlling functional variability in such oxide-based systems, such as memristive or resistive-switching devices.

0.21

A Unified Device-Level Physical Framework for DRAM Read Disturbance

cs.AR cond-mat.mes-hallphysics.app-ph ·2026-11-13 ·Zhaoqiang Bai, Haocong Luo, Xinhe Wang, Xujing Li, Yuelin Jiang +8 more
similarity 0.59
Abstract

Read disturbance in dynamic random-access memory (DRAM) depends on both local device interactions and the electrical conditions imposed by shared array circuitry. Here, we combine DIMM-level characterization results, device measurements, and TCAD simulations to interpret RowHammer, RowPress, and ColumnDisturb within a unified device-level physical framework. We relate charge evolution at the floating storage node to three key mechanisms: trap-assisted electron migration (EM), capacitive coupling (CC), and sense-amplifier-mediated disturb (SAMD). EM is local and trap-sensitive, while CC weakens with wordline separation. SAMD extends disturbance through shared column circuitry by modifying unselected-cell leakage under rail-level bitline biases, a contribution supported by the approximately ninefold higher OFF-state leakage measured relative to retention-like conditions for a high-voltage storage state. These distinct spatial ranges account for localized RowHammer and RowPress failures and remote ColumnDisturb populations with abrupt changes at subarray boundaries. We further interpret prolonged RowPress activation as a transition from an initial RowHammer-like transient to sustained leakage driven mainly by SAMD under held wordline and bitline biases. Within this device-level framework, trap effectiveness and storage-state-dependent leakage provide an interpretation of previously puzzling failure signatures, including the earlier onset of 0-to-1 RowHammer failures despite the predominance of 1-to-0 failures at high hammer counts. The same framework explains the observed RowPress and ColumnDisturb polarities and the duration-dependent reversal of neighboring- and passing-wordline effectiveness. These results provide a physical basis for developing compact DRAM reliability models across access patterns and array configurations.

0.22

Physics-Informed Neural Network Surrogate for Oxygen Vacancy Dynamics in epitaxial $\mathrm{SrTiO_3}$ on Si memristors via Dynamic Spectral Optimization

cs.LG cond-mat.mtrl-sci ·2026-09-02 ·Rodion Podorozhny, Nikoleta Theodoropoulou, Jelena Tešić
similarity 0.59
Abstract

Physics-informed neural networks (PINNs) offer a promising framework for modeling semiconductor devices, yet standard architectures struggle with severe numerical stiffness and multiscale spatial discrepancies inherent to oxide heterostructures. Here, we demonstrate a cascaded PINN architecture coupled with a custom second-order Chebyshev second kind polynomial spectral optimizer (DSO V2 Hybrid) to model ion-electronic drift-diffusion transport in Pt/SrTiO$_3$/Si memristive heterostructures across a 20 nm STO film on a 380 $μ$m Si substrate. By isolating potential, carrier density, and vacancy transport into four sequentially trained sub-neural-networks, our model circumvents condition numbers exceeding $10^{16}$ without operator splitting. The trained surrogate reproduces experimental conductive-AFM current-voltage hysteresis ($R^2 > 0.96$) while ensuring strict Poisson consistency across continuous space. Compared to conventional finite-element solvers (e.g., COMSOL), the PINN surrogate enables differentiable inverse parameter estimation and linear time inference.

0.26

A Voltage-controlled MTJ-CMOS Neuron Emulating Tunable Izhikevich-Inspired Dynamics

cs.ET cs.ARcs.NE ·2026-09-25 ·Kayode Oluwaseyi Adebunmi, Jordan Athas, Allison Fleming, Hamed Poursiami, Giorgio A. Ascoli +3 more
similarity 0.58
Abstract

Biological neurons exhibit diverse firing dynamics that enable adaptive and stimulus-dependent signalling, yet reproducing these dynamics in hardware has remained an enduring challenge. In this work, we present an Izhikevich- inspired reconfigurable neuron that co-designs voltage-controlled magnetic tunnel junction (V-MTJ) dynamics with CMOS circuitry. The proposed architecture combines V-MTJ excitability dynamics, enabled by a tunable energy landscape, with CMOS recovery dynamics to generate five distinct neuronal firing pat- terns with different spiking, bursting and response characteristics. Our results, based on measured V-MTJ characteristics and circuit simulations using com- mercial GlobalFoundries 22-nm FD-SOI CMOS technology, show an average energy consumption of 145.44 fJ per spike. Algorithmic simulations further show that these firing dynamics reduce inference spike activity by up to 88.6% while maintaining baseline classification accuracy. These results highlight the potential of V-MTJ/CMOS reconfigurable neurons to reduce computational activity and enable compact, energy-efficient brain-inspired computing systems.

0.09

A Time-Based Readout for Vector-Matrix Multiplication in Fully Analog Memristive SNNs

cs.ET cs.AIcs.AR ·2026-09-10 ·Elia Mateu-Barriendos, Álvaro Gómez-Pau, Josep Rius, Daniel Arumí, Rosa Rodríguez-Montañés +1 more
published similarity 0.55
Abstract · Accepted at 2026 IEEE 33rd International Conference on Electronics, Circuits and Systems (ICECS)

Artificial neural networks rely on vector-matrix multiplications (VMMs), whose implementation in von Neumann architectures is dominated by costly data movement between memory and processing units. Spiking neural networks (SNNs) mitigate this bottleneck by performing in-memory, analog VMMs using memristive crossbar arrays. However, conventional current-mode readout circuits incur significant area and power overhead. This work proposes a fully analog readout architecture based on voltage-to-time conversion of the VMM output. By sensing the column voltage, the proposed approach avoids current-mode summing and scaling circuitry, improving area and energy efficiency. Post-layout simulations of a 10x1 SNN implemented in a 130 nm CMOS technology validate the proposed architecture, while application to a trained 64x10 SNN for digit classification further demonstrates its feasibility for SNN inference.

0.51

OTTER - Two Transistor - One RRAM Architecture for Reliable In-Memory-Computing in 28 nm CMOS Technology

cs.ET ·2026-09-08 ·Yang Chen, Daniele Storelli, Xinyi Zhao, Ankit Bende, Paul-Philipp Manea +18 more
similarity 0.55
Abstract

This work presents OTTER, a 28 nm CMOS platform co-integrated with TaOx-based valence-change mechanism (VCM) RRAM, demonstrating a two-transistor-one-memristive-device (2T1R) architecture for reliable in-memory computing. The 2T1R cell combines a low-drive-current (LD) transistor and a high-drive-current (HD) transistor in parallel, providing dedicated bias paths for SET programming and RESET operation, respectively. Through systematic experimental and simulated comparison of various transistor-pairing configurations using the physical compact model JART VCM Rth, design guidelines for transistor sizing are derived, establishing the minimum RESET transistor W/L required for complete RESET as a function of the SET current compliance. The 2T1R cell is further characterized under pulse-based programming, demonstrating multilevel analog conductance tuning with narrow, well separated conductance states across six programmable levels. An analog content-addressable memory (aCAM) design based on the same 2T1R cell is additionally analyzed at the circuit level, evaluating trade-offs between top- and bottom-connected RRAM comparator configurations. A hardware implementation of compute-in-memory (CIM) multiply-and-accumulate (MAC) operations is further demonstrated on a 15 x 15 2T1R crossbar array.

0.29